2ADTD-D1243091Wireless Magnet Detector

1 3 2 Wireless Magnet Detector DS-PDMC-EG2-WB Quick Start Guide 3 1 2 4 5 6 7 User Manual 4 1 I II 23 4 a.b. Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China xxxx 3 min Device 5. Power Switch6. External Inputs Magnet Detection Performance Table Check if the installation position is properly. 3. Indicator1. Magnetic Stick 4. Tamper Button INSTALLATION English APPEARANCE 1 4 ENROLLMENT TEST 2 7. Battery 2. Positioning line Specification User Manual 3 Scan the QR code for more information and operation help. I. Check signal strength and align the positioning line. II. Install the detector. (optional)route the cable through cable hole if external inputs required. a. with screw b. with sponge tape (non EN compliant) Distance in AirDistance in Air Remove1113 Approach1517 Remove1113 Approach1519 Remove3328 Approach2823 Remove4342 Approach4038 Remove3735 Approach3230 Z+ Z- Axes of Operation Event Without Nominal DistanceWith Nominal Distance 5mm X+ X- Y Detection gapAccording to the magnet detection performance table E xternal inputs2 Tamper protectionFront & Back LED indicatorBlue (alarm) Operating temperature -10 °C to 55 °C (14 °F to 131 °F) -10 °C to 40 °C (14 °F to 104 °F) Certified Storage temperature-20 °C to 60 °C (-4 °F to 140 °F) Operating humidity10% to 90% Dimension (W × H × D) Sensor: 22.5mm × 103mm × 23.2mm Magnetic Stick: 13mm × 34.4mm × 11.4mm Weight59g Transmission frequency 433.10MHz RF range0,8Km (open area) BatteryCR123A x 1 (included) Standard battery life5 years 1 4 2 3 1113 1517 1113 1519 3328 2823 4342 4038 3735 3230 2 Español ASPECTO 1. Vara magnética 4. Botón de manipulación 2. Línea de posicionamiento 5. Interruptor de alimentación 3. Piloto 6. Entradas externas 7. Batería REGISTRO PRUEBA Compruebe que la posición de instalación sea la adecuada. Tabla de rendimiento de detección de imanes Ejes de operación Evento Sin distancia nominal Distancia en el aire Con distancia nominal de 5 mm Distancia en el aire Extraer Acercar Extraer Acercar Extraer Acercar Extraer Acercar Extraer Acercar Z+ Z- X+ X- Y I. Revise la intensidad de la señal y alinee la línea de posicionamiento. II. Instale el detector a. Con tornillo b. Con burlete adhesivo de espuma Pase el cable a través de la perforación para cables en caso de requerirse entradas externas. Especificación Manual de usuario Escanee el código QR para obtener más información y ayuda sobre el funcionamiento. Espacio de detección En función de la tabla de rendimiento de detección de imanes Entradas externas Protección antimanipulaciónAnterior y posterior Indicador ledAzul (alarma) Temperatura de funcionamiento -10°C a 55°C (14°F a 131°F) -10°C a 40°C (14°F a 104°F), certificado Temperatura de almacenamiento -20°C a 60 °C (-4 °F a 140 °F) Humedad de funcionamiento10 % a 90 % Dimensiones (An. × Al. × Pr.) Sensor: 22,5 mm x 103 mm x 23,2 mm Vara magnética: 13 mm x 34,4 mm x 11,4 mm Peso59g Frecuencia de transmisión 433.10 MHz Alcance de radiofrecuencia 0,8 km (área abierta) Batería1 batería CR123A (incluida) Vida útil de la batería convencional 5 años INSTALACIÓN Signal Strength Test Low Voltage Level2.45 V Z X Y X 1 4 2 3 1113 1517 1113 1519 3328 2823 4342 4038 3735 3230 2 Português APARÊNCIA 1. Adesivo magnético 4. Botão antiviolação 2. Linha de posicionamento 5. Interruptor 3. Indicador 6. Entradas externas 7. Bateria REGISTRO TESTE Verifique se a posição de instalação está adequada. Tabela de desempenho de detecção magnética Eixos de operação Evento Sem distância nominal Distância no ar Com distância nominal de 5 mm Distância no ar Remover Aproximar Remover Aproximar Remover Aproximar Remover Aproximar Remover Aproximar Z+ Z- X+ X- Y I. Verifique a intensidade do sinal e alinhe a linha de posicionamento. II. Instale o detector. a. com parafuso b. com fita dupla-face de espuma (opcional) passe o cabo pelo furo apropriado se forem necessárias entradas externas. Especificação Manual do usuário Leia o código QR para obter mais informações e ajuda na operação. Faixa de detecçãoDe acordo com a tabela de desempenho de detecção magnética Entradas externas Proteção antiviolaçãoFrontal e traseira Indicador LEDAzul (alarme) Temperatura de operação -10 °C a 55 °C (14 °F a 131 °F) -10 °C a 40 °C (14 °F a 104 °F) certificado Temperatura de armazenamento -20 °C a 60 °C (-4 °F a 140 °F) Umidade de operação10% a 90% Dimensões (L × A × P) Sensor: 22,5 mm × 103 mm × 23,2 mm Adesivo magnético: 13 mm × 34,4 mm × 11,4 mm Peso59 g Frequência de transmissão 433.10 MHz Faixa de RF0,8 km (área aberta) Bateria1 x CR123A (incluída) Duração padrão da bateria5 anos INSTALAÇÃO ©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. and other Hikvision's trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS…

Text truncated - open the document above for the full version.

Hangzhou Hikvision Digital Technology Co., Ltd. Date: 2020-07-22 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ADTD-D1243091 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Xiuying Zhang Title: Senior Certification engineer Signature: On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +86-0571-88075998-62460

Hangzhou Hikvision Digital Technology Co., Ltd. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District, angzhou 310052, China Regarding: Confidentiality Request regarding application for FCC ID: 2ADTD-D1243091 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Xiuying Zhang Title: Senior Certification engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Hangzhou Hikvision Digital Technology Co., Ltd. Address No. 555 Qianmo Road, Binjiang District Hangzhou 310052, China Grantee Code 2ADTD FCC ID 2ADTD-D1243091 Authorized Contact Name Xiuying Zhang Contact Email [email protected] Contact Phone +86-571-88075998 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date:2020/7/22 Print Name: Xiuying Zhang Title: Senior Certification engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 3 Page 1 of 3 External Photos Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Applicant: No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Equipment Under Test (EUT): Product Name: Wireless Magnet Detector Model No.: DS-PDMC-EG2-WB SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 3 Page 2 of 3 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 3 Page 3 of 3 End

Label location FCC warning

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 5 Page 1 of 5 Internal Photos Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Applicant: No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Equipment Under Test (EUT): Product Name: Wireless Magnet Detector Model No.: DS-PDMC-EG2-WB SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 5 Page 2 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 5 Page 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 4 of 5 Page 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 5 of 5 Page 5 of 5 End

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200600525401 Page: 1 of 20 Parlam Zhan E&E Section Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. 1 Cover Page RF REPORT Application No.: SHEM2006005254CR FCC ID: 2ADTD-D1243091 Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Applicant: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Manufacturer: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Manufacturer: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Factory: Hangzhou Hikvision Electronics Co., Ltd. Address of Factory: No.299,Qiushi Road,Tonglu Economic Development Zone,Tonglu County, Hangzhou,Zhejiang,310052,China Equipment Under Test (EUT): EUT Name: Wireless Magnet Detector Model No.: DS-PDMC-EG2-WB, DS-PDMC-EG2-WBUHK, DS-PDMC-EG2-WBCKV, DS-PDMC-EG2-WBUVS, DS-PDMC-EG2-WBKVO, DS-PDMC-EG2-WBHUN ¤ ¤ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Standard(s) : 47 CFR Part 15, Subpart C 15.231 Date of Receipt: 2020-06-29 Date of Test: 2020-07-06 to 2020-07-20 Date of Issue: 2020-07-20 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200600525401 Page: 2 of 20 Revision Record Version Description Date Remark 00 Original 2020-07-20 / Authorized for issue by: Micheal Niu / Project Engineer Parlam Zhan /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200600525401 Page: 3 of 20 2 Test Summary Test Item FCC Requirement Test method Result Antenna Requirement Part 15.203 / PASS Conducted Emission Part 15.207 ANSI C63.10 (2013) Section 6.2 N/A Field Strength of the Fundamental Part 15.231 (b) ANSI C63.10 (2013) Section 6.4 PASS Radiated Spurious emissions Part 15.209 15.231(b) ANSI C63.10 (2013) Section 6.4&6.5&6.6 PASS 20dB Bandwidth Part 15.231 (c) ANSI C63.10 (2013) Section 6.9.2 PASS Dwell Time Part 15.231 (a) ANSI C63.10 (2013) Section 7.8.4 PASS N/A: This EUT is powered by battery only; therefore the AC Conducted Emission test is not applicable. Declaration of EUT Family Grouping: Note2: There are series models mentioned in this report, and they are the identical in electrical and electronic characters. Only the model DS-PDMC-EG2-WB was tested since their differences were the model number and appearance. SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200600525401 Page: 4 of 20 3 Contents Page 1 COVER PAGE .................................................................................................................................................... 1 2 TEST SUMMARY .............................................................................................................................................. 3 3 CONTENTS ........................................................................................................................................................ 4 4 GENERAL INFORMATION ............................................................................................................................ 5 4.1 GENERAL DESCRIPTION OF E.U.T. ................................................................................................................. 5 4.2 TECHNICAL SPECIFICATIONS: ......................................................................................................................... 5 4.3 DESCRIPTION OF SUPPORT UNITS ................................................................................................................... 5 4.4 TEST LOCATION ............................................................................................................................................. 5 4.5 TEST FACILITY ............................................................................................................................................... 6 4.6 MEASUREMENT UNCERTAINTY ...................................................................................................................... 6 5 EQUIPMENTS USED DURING TEST ........................................................................................................... 7 6 TEST RESULTS AND MEASUREMENT DATA .......................................................................................... 8 6.1 ANTENNA REQUIREMENT ............................................................................................................................... 8 6.2 CONDUCTED EMISSIONS AT AC POWER LINE (150KHZ-30MHZ) .................................................................. 9 6.2.1 E.U.T. Operation ................................................................................................................................... 9 6.2.2 Test Setup Diagram ............................................................................................................................... 9 6.2.3 Measurement Procedure and Data .................................................................................................... 10 6.3 SPURIOUS EMISSIONS ................................................................................................................................... 11 6.3.1 Field Strength of the Fundamental Signal..........................................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 4 Page 1 of 4 Test Setup Photos-FCC Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Applicant: No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Equipment Under Test (EUT): Product Name: Wireless Magnet Detector Model No.: DS-PDMC-EG2-WB SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 4 Page 2 of 4 1 Contents Page 1 CONTENTS............................................................................................................... 2 2 EQUIPMENT UNDER TEST PICTURES ............................................................ 3 2.1 Radiated Emission Test Setup .......................................................................... 3 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 4 Page 3 of 4 2 EQUIPMENT UNDER TEST PICTURES 2.1 Radiated Emission Test Setup 30MHz to 1GHz Above 1GHz SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 4 of 4 Page 4 of 4 Zoom: End