2ADTD-D1502001Wireless Emergency Button

2 1 3 4 32 1 Wireless Emergency Button DS-PDEB2-EG2-WB Quick Start Guide 1 2 4 User Manual 3 5 I II xxxx 1 2 Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Signal Strength Test a. b. 1 2 3 4 5 ENGLISH APPEARANCE 1.Button Activated 2.Alarm Received ENROLLMENT INSTALLATION TEST REPLACE BATTERY User Manual Specification Scan the QR code for more information and operation help. 4. Battery1. Indicator 2. Button 3. Tamper Button I. Check signal strength. II. Align the groove to install the detector. a. with screw b. with sponge tape LED indicatorBlue (alarm) LED alarm confirmation Flashing LED Tamper protectionFront & Back Operating temperature -10 °C to 55 °C (14 °F to 131 °F) -10 °C to 40 °C (14 °F to 104 °F) Certified Storage temperature-20 °C to 60 °C (-4 °F to 140 °F) Operating humidity10% to 90% Dimension (W × H × D)63.8mm × 63.8mm × 17.9mm Weight45.5g Transmission frequency 433.1 MHz RF range1.2Km (open area) BatteryCR2450 x 1 (included) Standard battery life5 years Note: Non EN compliant after Installation wit Sponge Tape. 1 2 3 4 5 FRANÇAIS ASPECT 4. Batterie2. Touche3. Bouton antisabotage1. Indicateur ASSOCIATION INSTALLATION I. Vérifier la puissance du signal. II. Alignez la rainure pour installer le détecteur. a. avec des visb. avec du ruban adhésif TEST REMPLACEMENT DE LA PILE 1. Bouton activé 2. Alarme reçue Manuel d’utilisation Spécification Scannez le code QR pour obtenir plus d’informations ainsi qu’une aide concernant le fonctionnement de l’appareil. Indicateur LEDBleu (alarme) État de la LED en alarme confirmée LED clignotante Protection anti-sabotage Avant et arrière Température de fonctionnement De -10 °C à 55 °C De -10 °C à 40 °C Certifié Température de stockage De -20 °C à 60 °C Humidité de fonctionnementDe 10 à 90 % Dimensions (l × H × P) 63,8 × 63,8 × 17,9 mm Poids45,5 g Fréquence de transmission 433.1 MHz Plage RF1,2 km (espace dégagé) Batterie1 pile bouton CR2450 (fournie) Durée de vie standard de la pile 5 ans 1 2 3 4 5 РУССКИЙ ВНЕШНИЙ ВИД 4. Батарея 2. Кнопка 3. Кнопка датчика взлома1. Индикатор РЕГИСТРАЦИЯ УСТАНОВКА I. Проверка уровня сигнала. II. Выравнивание с пазом для установки детектора. a.С помощью винта b. С помощью клейкой губки ИСПЫТАНИЕ ЗАМЕНА БАТАРЕИ 1. Кнопка активирована 2. Сигнал получен Руководство пользователя Отсканируйте QR-код для получения справочной информации по эксплуатации и других дополнительных сведений. Технические данные Светодиодный индикаторСиний (тревога) Подтверждение срабатывания светодиода тревоги Мигающий светодиод Защита от взломаПередняя и задняя панели Рабочая температура от -10 °C до 55 °C от -10 °C до 40 °C Сертифицировано Температура при храненииот -20 °C до 60 °C Рабочая влажность10–90% Размеры (Ш x В x Г)63,8 мм × 63,8 мм × 17,9 мм Вес45,5 г Частота передачи 433.1 МГц Дальность действия РЧ-канала 1,2 км (на открытом пространстве) БатареяCR2450, 1 шт. (прилагается) Стандартный срок службы батареи 5 лет 1 2 3 4 5 NEDERLANDS VERSCHIJNINGSVORM 4. Batterij2. Toets 3. Sabotageknop1. Pictogram INSCHRIJVING INSTALLATIE I. Controleer de signaalsterkte. II. Lijn de groef uit om de detector te installeren. a.met schroefb. met sponstape Testen DE BATTERIJ VERVANGEN 1. Knop geactiveerd 2. Alarm ontvangen Gebruiksaanwijzing Specificatie Scan de QR-code voor meer informatie en assistentie bij de bediening. Led-indicatorBlauw (alarm) Bevestiging led-alarm Knipperende led Sabotagebescherming Voor- en achterzijde Bedrijfstemperatuur -10 °C tot 55 °C -10 °C tot 40 °C Gecertificeerd Opslagtemperatuur -20 °C tot 60 °C Bedrijfsvochtigheid 10% tot 90% Afmetingen (B × H × D) 63,8 mm × 63,8 mm × 17,9 mm Gewicht45,5 g Zendfrequentie 433.1 MHz RF-bereik1,2 km (open ruimte) BatterijCR2450 x 1 (inbegrepen) Standaard levensduur van de batterij 5 jaar 1 2 3 4 5 DEUTSCH AUFBAU 4. Batterie2. Taste 3. Sabotagetaste1. Statusanzeige REGISTRIERUNG INSTALLATION I. Prüfen Sie die Signalstärke. II. Richten Sie die Nut zur Installation des Melders aus. a. mit Schraubeb. mit Klebeband TEST BATTERIEWECHSEL 1. Taste aktiviert 2. Alarm empfangen Benutzerhandbuch Technische Daten Scannen Sie den QR-Code für weitere Informationen und Bedienungshilfen. LED-AnzeigeBlau (Alarm) LED-Alarmkonfirmation Blinkt LED SabotageschutzVorder- und Rückseite Betriebstemperatur -10 °C bis 55 °C -10 °C bis 40 °C Zertifiziert Lagertemperatur-20 °C bis +60 °C Betriebsfeuchtigkeit 10 % bis 90 % Abmessungen (B x T x H) 63,8 mm x 63,8 mm x 17,9 mm Gewicht45,5 g Übertragungsfrequenz 433.1 MHz Funkreichweite1,2 km (im freien Gelände) Batterie CR2450 x 1 (gehört zum Lieferumfang) Standard-Batterielaufzeit5 Jahre 1 2 3 4 5 ITALIANO ASPETTO 4. Batteria2. Pulsante 3. Pulsante manomissione1. Indicatore REGISTRAZIONE INSTALLAZIONE I. Controllo intensità del segnale. II. Allineare la scanalatura per installare il rilevatore. a.con le vitib. con il nastro biadesivo TEST SOSTITUZIONE DELLA BATTERIA 1. Pulsante attivato 2. Allarme ricevuto Manuale dell'utente Specifiche Per ulteriori informazioni e assistenza sull'utilizzo, scansionare il codice QR. Indicatore LEDBlu (allarme) Conferma allarme LED LED lampeggiante Protezione antimanomissioneAnteriore e posteriore Temperatura operativa Da -10 °C a 55 °C (da 14 °F a 131 °F) Da -10 °C a 40 °C (da 14 °F a 104 °F) Certificato Temperatura di conservazione Da -20 °C a 60 °C (da -4 °F a 140 °F) Umidità operativa Da 10% a 90% Dimensioni (L x A x P) 63,8 mm × 63,8 mm × 17,9 mm Peso Frequenza di trasmissione 433.1 MHz Portata segnale RF 1,2 km (spazi aperti) BatteriaCR2450 x 1 (in dotazione) Durata standard della batteria 5 anni 1 2 3 4 5 PORTUGUÊS APRESENTAÇÃO 4. Bateria2. Botão 3. Botão de violação1. Indicador REGISTRO INSTALAÇÃO I. Verificar a intensidade do sinal. II. Alinhe a ranhura para instalar o detector. a. com parafusob. com fita esponjosa TESTE TROCA DA BATERIA 1. Botão ativado 2. Alarme recebido Manual do usuário Leia o código QR para mais informações e ajuda na operação. Especificação Ind…

Text truncated - open the document above for the full version.

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Hangzhou Hikvision Digital Technology Co., Ltd. Address No. 555 Qianmo Road, Binjiang District Hangzhou 310052, China Grantee Code 2ADTD FCC ID 2ADTD-D1502001 Authorized Contact Name Xiuying Zhang Contact Email [email protected] Contact Phone +86-571-88075998 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date:2020/7/25 Print Name: Xiuying Zhang Title: Senior Certification engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Hangzhou Hikvision Digital Technology Co., Ltd. Date: 2020-07-22 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ADTD-D1502001 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Xiuying Zhang Title: Senior Certification engineer Signature: On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +86-0571-88075998-62460

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 4 Page 1 of 4 External Photos Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Applicant: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Equipment Under Test (EUT): Product Name: Wireless Emergency Button Model No.: DS-PDEB2-EG2-WB SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 4 Page 2 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 4 Page 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 4 of 4 Page 4 of 4 End

Label location FCC Warning

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 3 Page 1 of 3 Internal Photos Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Applicant: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Equipment Under Test (EUT): Product Name: Wireless Emergency Button Model No.: DS-PDEB2-EG2-WB SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 3 Page 2 of 3 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 3 Page 3 of 3 End

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200600493601 Page: 1 of 19 Parlam Zhan E&E Section Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. 1 Cover Page RF REPORT Application No.: SHEM2006004936CR FCC ID: 2ADTD-D1502001 Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Applicant: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Manufacturer: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Manufacturer: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Factory: Hangzhou Hikvision Electronics Co., Ltd. Address of Factory: No.299,Qiushi Road,Tonglu Economic Development Zone,Tonglu County, Hangzhou,Zhejiang,310052,China. Equipment Under Test (EUT): EUT Name: Wireless Emergency Button Model No.: DS-PDEB2-EG2-WB;DS-PDEB1-EG2-WB;DS-PDEB1-EG2-WBUHK; DS-PDEB1-EG2-WBCKV;DS-PDEB1-EG2-WBUVS; DS-PDEB1-EG2-WBKVO;DS-PDEB1-EG2-WBHUN; DS-PDEB2-EG2-WBUHK;DS-PDEB2-EG2-WBCKV; DS-PDEB2-EG2-WBUVS;DS-PDEB2-EG2-WBKVO; DS-PDEB2-EG2-WBHUN ¤ ¤ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade mark: HIKVISION Standard(s) : 47 CFR Part 15, Subpart C 15.231 Date of Receipt: 2020-06-20 Date of Test: 2020-06-22 to 2020-07-15 Date of Issue: 2020-07-16 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200600493601 Page: 2 of 19 Revision Record Version Description Date Remark 00 Original 2020-07-16 / Authorized for issue by: Vincent Zhu / Project Engineer Parlam Zhan /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200600496401 Page: 3 of 19 2 Test Summary Test Item FCC Requirement Test method Result Antenna Requirement Part 15.203 / PASS Conducted Emission Part 15.207 ANSI C63.10 (2013) Section 6.2 N/A Field Strength of the Fundamental Part 15.231 (b) ANSI C63.10 (2013) Section 6.4 PASS Radiated Spurious emissions Part 15.209 15.231(b) ANSI C63.10 (2013) Section 6.4&6.5&6.6 PASS 20dB Bandwidth Part 15.231 (c) ANSI C63.10 (2013) Section 6.9.2 PASS Dwell Time Part 15.231 (a) ANSI C63.10 (2013) Section 7.8.4 PASS Note: Declaration of EUT Family Grouping: There are series models mentioned in this report, and they are the identical in electrical and electronic characters. Only the model DS-PDEB2-EG2-WB was tested since their differences were the model number. N/A: This EUT is powered by battery only; there for the AC Conducted Emission test is not applicable. SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200600496401 Page: 4 of 19 3 Contents Page 1 COVER PAGE .................................................................................................................................................... 1 2 TEST SUMMARY .............................................................................................................................................. 3 3 CONTENTS ........................................................................................................................................................ 4 4 GENERAL INFORMATION ............................................................................................................................ 5 4.1 GENERAL DESCRIPTION OF E.U.T. ................................................................................................................. 5 4.2 TECHNICAL SPECIFICATIONS: ......................................................................................................................... 5 4.3 DESCRIPTION OF SUPPORT UNITS ................................................................................................................... 5 4.4 MEASUREMENT UNCERTAINTY ...................................................................................................................... 5 4.5 TEST LOCATION ............................................................................................................................................. 6 4.6 TEST FACILITY ............................................................................................................................................... 6 5 EQUIPMENTS USED DURING TEST ........................................................................................................... 7 6 TEST RESULTS AND MEASUREMENT DATA .......................................................................................... 8 6.1 ANTENNA REQUIREMENT ............................................................................................................................... 8 6.2 CONDUCTED EMISSIONS AT AC POWER LINE (150KHZ-30MHZ) .................................................................. 9 6.3 SPURIOUS EMISSIONS ................................................................................................................................... 10 6.4 20DB BANDWIDTH ....................................................................................................................................... 16 6.5 DWELL TIME ................................................................................................................................................ 17 7 TEST SETUP PHOTOGRAPHS .....................................................................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 4 Page 1 of 4 Test Setup Photos-FCC Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Applicant: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Equipment Under Test (EUT): Product Name: Wireless Emergency Button Model No.: DS-PDEB2-EG2-WB SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 4 Page 2 of 4 1 Contents Page 1 CONTENTS............................................................................................................... 2 2 EQUIPMENT UNDER TEST PICTURES ............................................................. 3 2.1 Spurious emissions ........................................................................................... 3 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 4 Page 3 of 4 2 EQUIPMENT UNDER TEST PICTURES 2.1 Spurious emissions 30MHz-1GHz Above 1GHz SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 4 of 4 Page 4 of 4 Zoom: End