
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Network PTZ Camera Quick Start Guide Installation Video 1 Table of Contents English 7 Français 12 Deutsch 17 Español 21 Italiano 26 Português 30 Nederlands 35 Čeština 39 Dansk 44 Magyar 48 Polski 52 Română 57 Slovenčina 61 Bahasa Indonesia 66 ျမန္မာ 70 Türkçe 78 Русский 82 Українська 87 2 A 2 1 . . . DC 12 V IN 3 4 5 6 B 3 C C1 ② ① C2 ③ 4 C3 C4 C5 ④ 5 D 1 2 6 E ① OUT ( n ) DC OUT ( n ) ② + - ① OUT ( n ) OUT ( n ) ③ 30 VDC 1 A GND OUT ~ 220 VAC L N ④ ( 10 A 250 VAC ) F F1 F2 7 English Product appearance is for reference only and may differ from the actual product. Cable Description (Page 2 – A) Notes: The cables vary depending on different camera models. 1. Power Cord: Supports 12 VDC power supply. 2. Video Cable: Connect BNC Cable to test the video output. 3. RS-485 4. Alarm Cable: Connect terminal ALARM-IN with GND interface, and connect terminal ALARM-OUT with ALARM-COM interface. 5. Audio Cable: Connect terminal AUDIO-IN with GND interface. 6. Network Cable: Connect the network interface with network cable. Install the Memory Card (Page 2 – B) Install the Camera (Page 3 – C) C1. Pull the bracket ① out from the side of the camera, and unclench the decorative cover ②. C2. Route the cables through the wall (and the hole in the bracket) or on the wall surface (and through the cable slot ③). C3. Fix the bracket to the wall with four PA4×25 screws (supplied). C4. Fix the camera to the bracket. C5. Connect the cables, put them in the back box ④, and close the decorative cover. Waterproof for Outdoor Installation (Page 5 – D) 1. Install network cable waterproof jacket. 2. Use supplied waterproof tape to protect cable connectors and unused cables. Alarm Output (Page 6 – E) ① Relay output ② DC load ③ Power supply ④ JQC-3FG Relay Protective Measures for Outdoor Installation (Page 6 – F1) Activate and Access Network Camera (Page 6 – F2) © 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. DISCLAIMER TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS 8 OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 9 —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced r…
Text truncated - open the document above for the full version.
Hangzhou Hikvision Digital Technology Co., Ltd. Current Date : 2022-01-11 To: SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Dear Sir/Madam, Subject: Declaration Letter about Identity of Products *WE (Hangzhou Hikvision Digital Technology Co., Ltd.) HEREBY DECLARED THAT Product Description MINI PTZ CAMERA Model No. DS-2DE3A404IW-DE/WUHK, DS-2DE3A404IW-DE/WCKV,DS-2DE3A404IW-DE/WUVS,DS-2DE3A404I W-DE/WKVO,DS-2DE3A404IW-DE/WHUN Manufacturer’s Name Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturer’s Address No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China *Except that the model number and appearance deviation, are identical with the original product as follows: Note: The definition of identical should be “electrically identical”. A device will be considered to be electrically identical if no changes are made to the devices’ schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical. with the model(s) below which samples we chose to be tested by SGS Model No. (型号): DS-2DE3A404IW-DE/W S6 Manufacturer’s Name (生产商名称): Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturer’s Address(生产商商地址): No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Sincerely, Signature (签字): Printed Name (姓名): Long Cheng Position/Title (职位): Testing & Certification Engineer Contact Number (联系电话): +8618969187825
Hangzhou Hikvision Digital Technology Co., Ltd. Date: 2022-01-11 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ADTD-DS2DE3AS6 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Long Cheng Title: Testing & Certification Engineer Signature: On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +8618969187825
Hangzhou Hikvision Digital Technology Co., Ltd. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District, angzhou 310052, China Regarding: Confidentiality Request regarding application for FCC ID: 2ADTD-DS2DE3AS6 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Long Cheng Title: Testing & Certification Engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.
Compliance Certification Services (Kunshan) Inc. Page: 1 of 5 External Photos Applicant: Hangzhou Hikvision Digital Technology Co., Ltd Address of Applicant: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Equipment Under Test (EUT): Product Name: MINI PTZ CAMERA Model No.: DS-2DE3A404IW-DE/W S6 Compliance Certification Services (Kunshan) Inc. Page: 2 of 5 Compliance Certification Services (Kunshan) Inc. Page: 3 of 5 Compliance Certification Services (Kunshan) Inc. Page: 4 of 5 Compliance Certification Services (Kunshan) Inc. Page: 5 of 5 End
Label location
Compliance Certification Services (Kunshan) Inc. Page: 1 of 13 Internal Photos Applicant: Hangzhou Hikvision Digital Technology Co., Ltd Address of Applicant: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Equipment Under Test (EUT): Product Name: MINI PTZ CAMERA Model No.: DS-2DE3A404IW-DE/W S6 Compliance Certification Services (Kunshan) Inc. Page: 2 of 13 Compliance Certification Services (Kunshan) Inc. Page: 3 of 13 Compliance Certification Services (Kunshan) Inc. Page: 4 of 13 Compliance Certification Services (Kunshan) Inc. Page: 5 of 13 Compliance Certification Services (Kunshan) Inc. Page: 6 of 13 Compliance Certification Services (Kunshan) Inc. Page: 7 of 13 Compliance Certification Services (Kunshan) Inc. Page: 8 of 13 Compliance Certification Services (Kunshan) Inc. Page: 9 of 13 Compliance Certification Services (Kunshan) Inc. Page: 10 of 13 Compliance Certification Services (Kunshan) Inc. Page: 11 of 13 Compliance Certification Services (Kunshan) Inc. Page: 12 of 13 Compliance Certification Services (Kunshan) Inc. Page: 13 of 13 End
Compliance Certification Services (Kunshan) Inc. Report No.: KSCR211100025502 Page: 1 of 8 Eric Lin Laboratory Manager 1 Cover Page RF MPE REPORT Application No.: KSCR2111000255AT FCC ID: 2ADTD-DS2DE3AS6 IC : 20199-DS2DE3AS6 Applicant: Hangzhou Hikvision Digital Technology Co., Ltd Address of Applicant: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Manufacturer: Hangzhou Hikvision Digital Technology Co.,Ltd Address of Manufacturer: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Factory: 1.Hangzhou Hikvision Technology Co., Ltd. 2.Hangzhou Hikvision Electronics Co., Ltd. 3.Chongqing Hikvision technology Co., Ltd. Address of Factory: 1.No.700,Dongliu Road, Binjiang District, Hangzhou Ctiy,Zhejiang, 310052, China 2.No.299,Qiushi Road,Tonglu Economic Development Zone,Tonglu County, Hangzhou,Zhejiang,310052,China 3.No. 118, Haikang Road, Area C, Jianqiao Industrial Park, Dadukou District, Chongqing, 401325,China Equipment Under Test (EUT): EUT Name: MINI PTZ CAMERA Model No.: DS-2DE3A404IW-DE/W S6 Add Model No: DS-2DE3A404IW-DE/WUHK,DS-2DE3A404IW-DE/WCKV,DS-2DE3A404IW- DE/WUVS,DS-2DE3A404IW-DE/WKVO,DS-2DE3A404IW-DE/WHUN Standard(s) : FCC Rules 47 CFR §2.1091 KDB447498 D01 General RF Exposure Guidance v06 RSS-102 Issue 5 Amendment 1 (February 2, 2021) Date of Receipt: 2021-11-19 Date of Test: 2021-11-22 to 2021-12-22 Date of Issue: 2021-12-22 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Report No.: KSCR211100025502 Page: 2 of 8 Revision Record Version Description Date Remark 00 Original 2021-12-22 / Authorized for issue by: Damon Zhou / Project Engineer Eric Lin / Reviewer Compliance Certification Services (Kunshan) Inc. Report No.: KSCR211100025502 Page: 3 of 8 2 Contents Page 1 COVER PAGE ................................................................................................................................................. 1 2 CONTENTS ..................................................................................................................................................... 3 3 GENERAL INFORMATION........................................................................................................................... 4 3.1 GENERAL DESCRIPTION OF E.U.T. ......................................................................................................... 4 3.2 TECHNICAL SPECIFICATIONS ................................................................................................................... 4 3.3 TEST LOCATION ....................................................................................................................................... 5 3.4 TEST FACILITY .......................................................................................................................................... 5 4 TEST STANDARDS AND LIMITS ............................................................................................................... 6 4.1 FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS: ......................................................................... 6 4.2 IC RADIOFREQUENCY RADIATION EXPOSURE LIMITS: ............................................................................. 6 5 MEASUREMENT AND CALCULATION .................................................................................................... 7 5.1 MAXIMUM TRANSMIT POWER ................................................................................................................... 7 5.2 MPE CALCULATION ................................................................................................................................. 8 Compliance Certification Services (Kunshan) Inc. Report No.: KSCR211100025502 Page: 4 of 8 3 General Information 3.1 General Description of E.U.T. Power supply: DC 12V by adapter or 42.5-57V,0.6A by PoE(802.3at) Adapter Model:KPL-040F-VI INPUT:100-240V,50/60Hz,1.7A OUTPUT:12.0V,3.33A,40.0W Serial Number: G66114537 Firmware Version: V5.7.2 build 210826 3.2 Technical Specifications 2.4GHz Antenna Gain: Antenna 1:2.95dBi, (Provided by manufacturer) Antenna 2:5.20dBi, (Provided by manufacturer) Directional gain:7.16dBi Antenna Type: Antenna 1:FPC Antenna, Antenna 2:FPC Antenna Channel Spacing: 5MHz Modulation Type: 802.11b: DSSS (CCK, DQPSK, DBPSK) 802.11g/n: OFDM (64QAM, 16QAM, QPSK, BPSK) Number of Channels: 802.11b/g/n(HT20):11 802.11n(HT40):7 Operation Frequency: 802.11b/g/n(HT20): 2412MHz to 2462MHz 802.11n(HT40): 2422MHz to 2452MHz Compliance Certification Services (Kunshan) Inc. Report No.: KSCR211100025502 Page: 5 of 8 3.3 Test Location All tests were performed at: Compliance Certification Services (Kunshan) Inc. No.10 Weiye Rd, Innovation park, Eco&Tec, Development Zone, Kunshan City, Jiangsu, China. Tel: +86 512 5735 5888 Fax: +86 512 5737 0818 No tests were sub-contracted. 3.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L4354) CNAS has accredited Compliance Certification Services (Kunshan) Inc. to ISO/IEC 17025:2017 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA (Certificate No. 2541.01) Compliance Certification Services (Kunshan) Inc. is accredited by the American Association for Laboratory Accreditation (A2LA). Certificate No. 2541.01. • FCC (Designation Number: CN1172) Compliance Certification Services Inc. has been recognized as an accredited testing laboratory. Designation Number: CN1172. • ISED (CAB identifier: CN0072) Compliance Certification Services (Kunshan) Inc. has been recognized by Innovation, Science and Economic Development Canada (ISED) as an accredited testing laboratory. Company Number: 2324E • VCCI (Member No.: 1938) The 3m and 10m Semi-anecho…
Text truncated - open the document above for the full version.
Compliance Certification Services (Kunshan) Inc. Page: 1 of 96 Appendix A for KSCR211100025501 1. Duty Cycle 1.1 Ant1 1.1.1 Test Result Ant1 Mode TX Type Frequency (MHz) T_on (ms) Period (ms) Duty Cycle (%) Duty Cycle Correction Factor (dB) 802.11b SISO 2412 100.000 100.000 100.00 0.00 2437 100.000 100.000 100.00 0.00 2462 100.000 100.000 100.00 0.00 802.11g SISO 2412 100.000 100.000 100.00 0.00 2437 100.000 100.000 100.00 0.00 2462 100.000 100.000 100.00 0.00 802.11n (HT20) MIMO 2412 100.000 100.000 100.00 0.00 2437 100.000 100.000 100.00 0.00 2462 100.000 100.000 100.00 0.00 802.11n (HT40) MIMO 2422 100.000 100.000 100.00 0.00 2437 100.000 100.000 100.00 0.00 2452 100.000 100.000 100.00 0.00 Compliance Certification Services (Kunshan) Inc. Page: 2 of 96 1.1.2 Test Graph 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 3 of 96 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 4 of 96 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 5 of 96 802.11n(HT20)_LCH_2412MHz_Ant1 (MIMO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (MIMO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 6 of 96 802.11n(HT20)_HCH_2462MHz_Ant1 (MIMO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant1 (MIMO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 7 of 96 802.11n(HT40)_MCH_2437MHz_Ant1 (MIMO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant1 (MIMO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 8 of 96 2. Bandwidth 2.1 OBW 2.1.1 Test Result Mode TX Type Frequency (MHz) Ant 99% Occupied Bandwidth (MHz) Verdict Result 802.11b SISO 2412 1 14.779 Pass 2 14.777 Pass 2437 1 14.775 Pass 2 14.768 Pass 2462 1 14.766 Pass 2 14.766 Pass 802.11g SISO 2412 1 17.452 Pass 2 17.470 Pass 2437 1 17.449 Pass 2 17.459 Pass 2462 1 17.449 Pass 2 17.455 Pass 802.11n (HT20) MIMO 2412 1 18.276 Pass 2 18.282 Pass 2437 1 18.269 Pass 2 18.264 Pass 2462 1 18.264 Pass 2 18.272 Pass 802.11n (HT40) MIMO 2422 1 35.922 Pass 2 35.922 Pass 2437 1 35.905 Pass 2 35.901 Pass 2452 1 35.899 Pass 2 35.894 Pass Compliance Certification Services (Kunshan) Inc. Page: 9 of 96 2.1.2 Test Graph 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_LCH_2412MHz_Ant2 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 10 of 96 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant2 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 11 of 96 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11b_HCH_2462MHz_Ant2 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 12 of 96 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant2 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 13 of 96 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_MCH_2437MHz_Ant2 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 14 of 96 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant2 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 15 of 96 802.11n(HT20)_LCH_2412MHz_Ant1 (MIMO)_NTNV 802.11n(HT20)_LCH_2412MHz_Ant2 (MIMO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 16 of 96 802.11n(HT20)_MCH_2437MHz_Ant1 (MIMO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant2 (MIMO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 17 of 96 802.11n(HT20)_HCH_2462MHz_Ant1 (MIMO)_NTNV 802.11n(HT20)_HCH_2462MHz_Ant2 (MIMO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 18 of 96 802.11n(HT40)_LCH_2422MHz_Ant1 (MIMO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant2 (MIMO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 19 of 96 802.11n(HT40)_MCH_2437MHz_Ant1 (MIMO)_NTNV 802.11n(HT40)_MCH_2437MHz_Ant2 (MIMO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 20 of 96 802.11n(HT40)_HCH_2452MHz_Ant1 (MIMO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant2 (MIMO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 21 of 96 2.2 6dB BW 2.2.1 Test Result Mode TX Type Frequency (MHz) Ant 6dB Bandwidth (MHz) Verdict Result Limit 802.11b SISO 2412 1 10.096 >=0.5 Pass 2 10.100 >=0.5 Pass 2437 1 10.098 >=0.5 Pass 2 10.097 >=0.5 Pass 2462 1 10.094 >=0.5 Pass 2 10.094 >=0.5 Pass 802.11g SISO 2412 1 16.538 >=0.5 Pass 2 16.556 >=0.5 Pass 2437 1 16.540 >=0.5 Pass 2 16.538 >=0.5 Pass 2462 1 16.545 >=0.5 Pass 2 16.550 >=0.5 Pass 802.11n (HT20) MIMO 2412 1 17.673 >=0.5 Pass 2 17.667 >=0.5 Pass 2437 1 17.667 >=0.5 Pass 2 17.666 >=0.5 Pass 2462 1 17.661 >=0.5 Pass 2 17.664 >=0.5 Pass 802.11n (HT40) MIMO 2422 1 36.383 >=0.5 Pass 2 36.373 >=0.5 Pass 2437 1 36.369 >=0.5 Pass 2 36.366 >=0.5 Pass 2452 1 36.359 >=0.5 Pass 2 36.377 >=0.5 Pass Compliance Certification Services (Kunshan) Inc. Page: 22 of 96 2.2.2 Test Graph 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_LCH_2412MHz_Ant2 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 23 of 96 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant2 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 24 of 96 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11b_HCH_2462MHz_Ant2 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 25 of 96 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant2 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 26 of 96 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_MCH_2437MHz_Ant2 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 27 of 96 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant2 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 28 of 96 802.11n(HT20)_LCH_2412MHz_Ant1 (MIMO)_NTNV 802.11n(HT20)_LCH_2412MHz_Ant2 (MIMO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 29 of 96 802.11n(HT20)_MCH_2437MHz_Ant1 (MIMO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant2 (MIMO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 30 of 96 802.11n(HT20)_HCH_2462MHz_Ant1 (MIMO)_NTNV 802.11n(HT20…
Text truncated - open the document above for the full version.
Compliance Certification Services (Kunshan) Inc. Report No.: KSCR211100025501 Page: 1 of 85 Eric Lin Laboratory Manager TEST REPORT Application No.: KSCR2111000255AT FCC ID: 2ADTD-DS2DE3AS6 IC: 20199-DS2DE3AS6 Applicant: Hangzhou Hikvision Digital Technology Co., Ltd Address of Applicant: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Manufacturer: Hangzhou Hikvision Digital Technology Co.,Ltd Address of Manufacturer: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Factory: 1.Hangzhou Hikvision Technology Co., Ltd. 2.Hangzhou Hikvision Electronics Co., Ltd. 3.Chongqing Hikvision technology Co., Ltd. Address of Factory: 1.No.700,Dongliu Road, Binjiang District, Hangzhou Ctiy,Zhejiang, 310052, China 2.No.299,Qiushi Road,Tonglu Economic Development Zone,Tonglu County, Hangzhou,Zhejiang,310052,China 3.No. 118, Haikang Road, Area C, Jianqiao Industrial Park, Dadukou District, Chongqing, 401325,China Equipment Under Test (EUT): EUT Name: MINI PTZ CAMERA Model No.: DS-2DE3A404IW-DE/W S6, DS-2DE3A404IW-DE/WUHK, DS-2DE3A404IW-DE/WCKV,DS-2DE3A404IW-DE/WUVS,DS- 2DE3A404IW-DE/WKVO,DS-2DE3A404IW-DE/WHUN¤ ¤ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade mark: HIKVISION Standard(s) : 47 CFR Part 15, Subpart C 15.247 RSS-247 Issue 2, February 2017 RSS-Gen Issue 5 Amendment 2 (February 2021) Date of Receipt: 2021-11-19 Date of Test: 2021-11-22 to 2021-12-22 Date of Issue: 2021-12-22 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Report No.: KSCR211100025501 Page: 2 of 85 Revision Record Version Description Date Remark 00 Original 2021-12-22 / Authorized for issue by: Damon Zhou / Project Engineer Eric Lin / Reviewer Compliance Certification Services (Kunshan) Inc. Report No.: KSCR211100025501 Page: 3 of 85 2 Test Summary Radio Spectrum Technical Requirement Item FCC Requirement IC Requirement Method Result Antenna Requirement 47 CFR Part 15, Subpart C 15.203 & 15.247(c) RSS-Gen Clause 6.8 N/A Customer Declaration Radio Spectrum Matter Part Item FCC Requirement IC Requirement Method Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.207 RSS-Gen Clause 8.8 ANSI C63.10 (2013) Section 6.2 Pass Minimum 6dB Bandwidth 47 CFR Part 15, Subpart C 15.247a(2) RSS-247 Clause 5.2(a) ANSI C63.10 (2013) Section 11.8.1 Pass Conducted Average Output Power 47 CFR Part 15, Subpart C 15.247(b)(3) RSS-247 Clause 5.4(d) ANSI C63.10 (2013) Section 11.9.2 Pass Power Spectrum Density 47 CFR Part 15, Subpart C 15.247(e) RSS-247 Clause 5.2(b) ANSI C63.10 (2013) Section 11.10.3 Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247(d) RSS-247 Clause 5.5 ANSI C63.10 (2013) Section 11.13.3.2 Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247(d) RSS-247 Clause 5.5 ANSI C63.10 (2013) Section 11.11 Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.209 & 15.247(d) RSS-247 Section 3.3 & RSS-Gen Section 8.9 ANSI C63.10 (2013) Section 6.10.5 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.209 & 15.247(d) RSS-247 Section 3.3 & RSS-Gen Section 8.9 ANSI C63.10 (2013) Section 6.4,6.5,6.6 Pass 99% Bandwidth - RSS-Gen Section 6.7 ANSI C63.10 Section 6.9.3 Pass Declaration of EUT Family Grouping: Note: There are series models mentioned in this report, and they are the similar in electrical and electronic characters. Only the model DS-2DE3A404IW-DE/W S6 was tested since their differences were the model number and appearance. Compliance Certification Services (Kunshan) Inc. Report No.: KSCR211100025501 Page: 4 of 85 3 Contents Page 1 COVER PAGE.............................................................................................................................................. 1 2 TEST SUMMARY ......................................................................................................................................... 3 3 CONTENTS .................................................................................................................................................. 4 4 GENERAL INFORMATION ......................................................................................................................... 5 4.1 DETAILS OF E.U.T.................................................................................................................................. 5 4.2 POWER LEVEL SETTING USING IN TEST: ................................................................................................... 5 4.3 DESCRIPTION OF SUPPORT UNITS ........................................................................................................... 5 4.4 MEASUREMENT UNCERTAINTY ................................................................................................................ 6 4.5 TEST LOCATION ..................................................................................................................................... 7 4.6 TEST FACILITY ....................................................................................................................................... 7 4.7 DEVIATION FROM STANDARDS ................................................................................................................ 7 4.8 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................... 7 5 EQUIPMENT LIST ....................................................................................................................................... 8 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ................................................................................. 10 6.1 ANTENNA REQUIREMENT ...................................................................................................................... 10 7 RADIO SPECTRUM…
Text truncated - open the document above for the full version.
Compliance Certification Services (Kunshan) Inc. Page: 1 of 5 Test Setup Photos-FCC Applicant: Hangzhou Hikvision Digital Technology Co., Ltd Address of Applicant: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Equipment Under Test (EUT): Product Name: MINI PTZ CAMERA Model No.: DS-2DE3A404IW-DE/W S6 Compliance Certification Services (Kunshan) Inc. Page: 2 of 5 Contents Page 1 CONDUCTED EMISSION TEST SETUP ................................................................................................. 3 2 RF CONDUCTED TEST S…
Text truncated - open the document above for the full version.
588 West Jindu Road, Xinqiao, Songjiang · ShangHai · China
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 2 | 15C | 2.42 GHz - 2.45 GHz | 33.00 mW |

Ethernet Switch
Equipment Class
NII - Unlicensed National Information Infrastructure TX
Face Recognition Terminal
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
Face Recognition Terminal
Equipment Class
DTS - Digital Transmission System
Stand Pole
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHz
Face Recognition Terminal
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter