2ADTD-MCH508Helmet Camera

Helmet Camera Quick Start Guide Scan the QR code for Portable Device Assistant application. Helmet Camera Quick Start Guide 1 Quick Start Guide COPYRIGHT © 2019 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual. About this Manual This Manual is applicable to Helmet Camera. The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the company website (http://overseas.hikvision.com/en/). Please use this user manual under the guidance of professionals. Trademarks Acknowledgement and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners. Legal Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. Helmet Camera Quick Start Guide 2 Regulatory information FCC information FCC compliance: Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate th e equipment. Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the Radio Equipment Directive 2014/53./EU, the EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info. Helmet Camera Quick Start Guide 3 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info. Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. This device complies with Industry Canada licence-exempt RSS standard(s). O…

Text truncated - open the document above for the full version.

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Hangzhou Hikvision Digital Technology Co., Ltd. Address No. 555 Qianmo Road, Binjiang District Hangzhou 310052, China Grantee Code 2ADTD FCC ID 2ADTD-MCH508 Authorized Contact Name Xiuying Zhang Contact Email [email protected] Contact Phone +86-571-88075998 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date:2020/10/30 Print Name: Xiuying Zhang Title: Senior Certification engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Hangzhou Hikvision Digital Technology Co., Ltd. Date: 2020-11-01 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ADTD-MCH508 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Xiuying Zhang Title: Senior Certification engineer Signature: On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +86-0571-88075998-62460

Hangzhou Hikvision Digital Technology Co., Ltd. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District, angzhou 310052, China Regarding: Confidentiality Request regarding application for FCC ID: 2ADTD-MCH508 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Tune Up The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Xiuying Zhang Title: Senior Certification engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.

Hangzhou Hikvision Digital Technology Co., Ltd. Current Date : 2020-10-30 To: SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Dear Sir/Madam, Subject: Declaration Letter about Identity of Products *WE (Hangzhou Hikvision Digital Technology Co., Ltd.) HEREBY DECLARED THAT Product Description helmet Camera Model No. DS-MCH508/GLE, DS-MCH508/GPS/WIFI, DS-MCH508/GLE/GPS/WIFI, DS-MCH508/3/W/GLE, DS-MCH508/3/I/GLE, DS-MCH508/3/W/GPS/WIFI, DS-MCH508/3/I/GPS/WIFI, DS-MCH508/3/W/32G/GPS/WIFI, DS-MCH508/3/I/32G/GPS/WIFI, DS-MCH508/3/W/32G/GLE, DS-MCH508/3/I/32G/GLE, DS-MCHX08/YYYYYYY/ZZZZZZZ,'X','Y','Z' can be uppercase or lowercase English letter,digital nunber，or '/', '-', or empty Manufacturer’s Name Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturer’s Address No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China *Except that the model number deviation, are identical with the original product as follows: Note: The definition of identical should be “electrically identical”. A device will be considered to be electrically identical if no changes are made to the devices’ schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical. Model No. (型号): DS-MCH508 Manufacturer’s Name (生产商名称): Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturer’s Address（生产商商地址): No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Sincerely, Signature (签字): Printed Name (姓名): Xiuying Zhang Position/Title (职位): Senior Certification engineer Hangzhou Hikvision Digital Technology Co., Ltd. Contact Number (联系电话): +86-571-88075998

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 5 Page 1 of 5 External Photos Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Applicant: No.555 Qianmo Road,Binjiang District Hangzhou 310052,China Equipment Under Test (EUT): Product Name: helmet Camera Model No.: DS-MCH508 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 5 Page 2 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 5 Page 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 4 of 5 Page 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 5 of 5 Page 5 of 5 End

Label location FCC Warning

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 13 Page 1 of 13 Internal Photos Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Applicant: No.555 Qianmo Road,Binjiang District Hangzhou 310052,China Equipment Under Test (EUT): Product Name: helmet Camera Model No.: DS-MCH508 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 13 Page 2 of 13 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 13 Page 3 of 13 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 4 of 13 Page 4 of 13 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 5 of 13 Page 5 of 13 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 6 of 13 Page 6 of 13 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 7 of 13 Page 7 of 13 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 8 of 13 Page 8 of 13 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 9 of 13 Page 9 of 13 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 10 of 13 Page 10 of 13 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 11 of 13 Page 11 of 13 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 12 of 13 Page 12 of 13 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 13 of 13 Page 13 of 13 End

Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Appendix C Calibration certificate 1. Dipole D835V2 - SN 4d114(2019/06/11) D1800V2 - SN 2d170(2019/06/11) D1900V2 - SN 5d136(2019/06/11) D2450V2 - SN 817(2019/06/10) 2. DAE DAE4-SN 1245(2020-05-27) 3. Probe EX3DV4-SN 3798(2020-05-29) Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Dipole D835V2 SN 4d114 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2019/6/11 -27.9 / 50.6 / 2020/6/10 -28.3 -1.43% 51.7 1.1Ω Body Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2019/6/11 -24.5 / 47.1 / 2020/6/10 -25.2 -2.86% 48.5 1.4Ω Dipole D1800V2 SN 2d170 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2019/6/11 -29.4 / 49.1 / 2020/6/10 -30.2 -2.72% 50.3 1.2Ω Body Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2019/6/11 -24.2 / 44.9 / 2020/6/10 -24.7 -2.07% 45.6 0.7Ω Dipole D1900V2 SN 5d136 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2019/6/11 -24.3 / 50.5 / 2020/6/10 -25.0 -2.88% 51.9 1.4Ω Body Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2019/6/11 -22.7 / 47.1 / 2020/6/10 -23.1 -1.76% 48.2 1.1Ω Dipole D2450V2 SN 817 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2019/6/10 -28.5 / 52.3 / 2020/6/9 -29.3 2.81% 54.3 2.0Ω Body Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2019/6/10 -26.6 / 48.7 / 2020/6/9 -27.5 3.38% 49.6 0.9Ω

Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Appendix D Photographs 1. SAR measurement System 2. Photographs of Tissue Simulate Liquid 3. Photographs of EUT test position 4. EUT Constructional Details Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 1. SAR measurement System Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 2. Photographs of Tissue Simulate Liquid Photo 1: Tissue Simulant Liquid for Head 835 Photo 2: Tissue Simulant Liquid for Head 1800 Photo 3: Tissue Simulant Liquid for Head 1900 Photo 4: Tissue Simulant Liquid for Head 2450 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 3. Photographs of EUT test position Photo 5: Bottom side 0mm Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 4. EUT Constructional Details Photo 6: Front View Photo 7: Back View Photo 8: Left View Photo 9: Right View Photo 10: Top View Photo 11: Bottom View

Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Page: 1 of 87 FCC SAR TEST REPORT Application No.: KSEM2009001278CR Applicant: Hangzhou Hikvision Digital Technology Co.,Ltd Address of Applicant: No.555 Qianmo Road,Binjiang Dis trict,Hangzhou,310052,China Manufacturer: Hangzhou Hikvision Digital Technology Co.,Ltd Address of Manufacturer: No.555 Qianmo Road,Binjiang District,Hangzhou,310052,China Factory: Hangzhou Hikvision Technology Co.,Ltd Address of Factory: No.700,Dongliu Road,Binjiang District,Hangzhou City,Zhejiang,310052,China Product Name: Helmet Camera Model No.(EUT): DS-MCH508 Series Model: DS-MCH508/GLE, DS-MCH508/GPS/WIFI, DS-MCH508/GLE/GPS/WIFI, DS-MCH508/3/W/GLE, DS-MCH508/3/I/GLE, DS-MCH508/3/W/GPS/WIFI, DS-MCH508/3/I/GPS/WIFI, DS-MCH508/3/W/32G/GPS/WIFI, DS-MCH508/3/I/32G/GPS/WIFI, DS-MCH508/3/W/32G/GLE, DS-MCH508/3/I/32G/GLE, DS-MCHX08/YYYYYYY/ZZZZZZZ,’X’,’Y’,’Z’ can be uppercase or lowercase English letter, digital number, or ‘/’, ‘-’, or empty. Trade mark: HIKVISION FCC ID: 2ADTD-MCH508 Standard(s) : FCC 47CFR §2.1093 Date of Receipt: 2020-10-09 Date of Test: 2020-10-14 to 2020-10-16 Date of Issue: 2020-10-23 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Eric Lin Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Page: 2 of 87 REVISION HISTORY Revision Record Version Description Date Remark 00 Original 2020-10-23 Original Authorized for issue by: Richard.Kong/ Project Engineer Eric.Lin/Reviewer Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Page: 3 of 87 TEST SUMMARY Frequency Band Test position Test mode Max Reported SAR1g (W/kg) SAR limit (W/kg) Verdict GSM850 Head GPRS2TS 0.33 1.6 PASS GSM1900 Head GPRS4TS 1.09 1.6 PASS WCDMA Band II Head RMC 0.49 1.6 PASS WCDMA Band V Head RMC 0.16 1.6 PASS LTE Band 2 Head QPSK 0.50 1.6 PASS LTE Band 4 Head QPSK 0.20 1.6 PASS LTE Band 5 Head QPSK 0.15 1.6 PASS LTE Band 7 Head QPSK 0.42 1.6 PASS WIFI2.4G Head 802.11g 0.01 1.6 PASS Scenario Head Sum SAR 1.36 SPLSR NA SPLSR Limited 0.04 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900127801 Page: 4 of 87 CONTENTS 1 GENERAL INFORMATION .............................................................................................................................. 6 1.1 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 1.1.1 DUT Antenna Locations(Unit: mm) ...................................................................................................... 7 1.2 TEST SPECIFICATION ................................................................................................................................... 9 1.3 RF EXPOSURE LIMITS ................................................................................................................................ 10 1.4 TEST LOCATION ........................................................................................................................................ 11 1.5 TEST FACILITY .......................................................................................................................................... 11 2 LABORATORY ENVIRONMENT ................................................................................................................... 12 3 SAR MEASUREMENTS SYSTEM CONFIGURATION .................................................................................. 13 3.1 THE SAR MEASUREMENT SYSTEM ............................................................................................................ 13 3.2 ISOTROPIC E-FIELD PROBE EX3DV4 ......................................................................................................... 14 3.3 DATA ACQUISITION ELECTRONICS (DAE) ................................................................................................... 15 3.4 SAM TWIN PHANTOM ................................................................................................................................ 15 3.5 ELI PHANTOM ........................................................................................................................................... 16 3.6 DEVICE HOLDER FOR TRANSMITTERS ......................................................................................................... 17 3.7 MEASUREMENT PROCEDURE ...................................................................................................................... 18 3.7.1 Scanning procedure ........................................................................................................................... 18 3.7.2 Data Storage ...................................................................................................................................... 20 3.7.3 Data Evaluation by SEMCAD ............................................................................................................. 20 4 SAR MEASUREMENT VARIABILITY AND UNCERTAINTY ........................................................................ 22 4.1 SAR MEASUREMENT VARIABILITY ............................................................................................................... 22 4.2 SAR MEASUREMENT UNCERTAINTY ..................................................…

Text truncated - open the document above for the full version.

Appendix A for SHEM200900789501 1. Duty Cycle 1.1 Test Result Test Mode Channel Frequency(M Hz) TX Type ANT No. T_on (ms) Period (ms) Duty Cycle (%) Duty Cycle Correction Factor (dB) 802.11b 2412 SISO 1 8.600 8.700 98.85 0.05 2437 SISO 1 8.600 8.700 98.85 0.05 2462 SISO 1 8.600 8.700 98.85 0.05 802.11g 2412 SISO 1 1.427 1.530 93.27 0.30 2437 SISO 1 1.428 1.530 93.33 0.30 2462 SISO 1 1.427 1.529 93.33 0.30 802.11n(HT20) 2412 SISO 1 1.306 1.405 92.95 0.32 2437 SISO 1 1.307 1.405 93.02 0.31 2462 SISO 1 1.306 1.405 92.95 0.32 1.2 Test Graph 2. Bandwidth 2.1 Test Result Test Mode Frequency (MHz) TX Type ANT No. 6dB Bandwidth Verdict Test Result (MHz) 802.11b 2412 SISO 1 8.113 PASS 2437 SISO 1 8.583 PASS 2462 SISO 1 9.077 PASS 802.11g 2412 SISO 1 16.086 PASS 2437 SISO 1 15.946 PASS 2462 SISO 1 16.343 PASS 802.11n(HT20) 2412 SISO 1 17.573 PASS 2437 SISO 1 16.929 PASS 2462 SISO 1 17.633 PASS Test Mode Frequency (MHz) TX Type ANT No. 99% Occupied Bandwidth Test Result (MHz) 802.11b 2412 SISO 1 14.008 Only for Report Use 2437 SISO 1 14.007 Only for Report Use 2462 SISO 1 13.998 Only for Report Use 802.11g 2412 SISO 1 17.069 Only for Report Use 2437 SISO 1 17.087 Only for Report Use 2462 SISO 1 17.076 Only for Report Use 802.11n(HT20) 2412 SISO 1 18.054 Only for Report Use 2437 SISO 1 18.077 Only for Report Use 2462 SISO 1 18.078 Only for Report Use 2.2 Test Graph - 6dB Bandwidth 2.3 Test Graph - 99% Occupied Bandwidth 3. Maximum Conducted Output Power 3.1 Test Result Test Mode Frequency (MHz) Tx Type Measured Peak Output Power (dBm) Limits (dBm) Verdict Ant 1 802.11b 2412 SISO 17.19 30 PASS 2437 SISO 17.53 30 PASS 2462 SISO 17.53 30 PASS 802.11g 2412 SISO 17.41 30 PASS 2437 SISO 17.67 30 PASS 2462 SISO 18.02 30 PASS 802.11n(HT20) 2412 SISO 17.24 30 PASS 2437 SISO 17.59 30 PASS 2462 SISO 18.07 30 PASS 3.2 Test Graph 4. Maximum Power Spectral Density (PSD) 4.1 Test Result Test Mode Frequency (MHz) Tx Type Maximum Power Spectral Density (dBm/3KHz) Limits (dBm/3kHz) Verdict Ant 1 802.11b 2412 SISO -7.51 ≤8 PASS 2437 SISO -8.60 ≤8 PASS 2462 SISO -8.30 ≤8 PASS 802.11g 2412 SISO -13.30 ≤8 PASS 2437 SISO -12.83 ≤8 PASS 2462 SISO -11.31 ≤8 PASS 802.11n(HT20) 2412 SISO -11.20 ≤8 PASS 2437 SISO -14.09 ≤8 PASS 2462 SISO -12.78 ≤8 PASS 4.2 Test Graph 5. Unwanted Emissions in Non-restricted Frequency Bands 5.1 Test Result Test Mode Frequency (MHz) TX Type ANT No. Spurious Conducted Emission (dBm) Limits (dBm) Verdict 802.11b 2412 SISO 1 Refer to test graph -13.78 PASS 2437 SISO 1 Refer to test graph -13.78 PASS 2462 SISO 1 Refer to test graph -13.78 PASS 802.11g 2412 SISO 1 Refer to test graph -17.82 PASS 2437 SISO 1 Refer to test graph -17.82 PASS 2462 SISO 1 Refer to test graph -17.82 PASS 802.11n(HT20) 2412 SISO 1 Refer to test graph -18.64 PASS 2437 SISO 1 Refer to test graph -18.64 PASS 2462 SISO 1 Refer to test graph -18.64 PASS 5.2 Test Graph

Appendix C for SHEM200900789503 1. Duty Cycle 1.1 Test Result Test Mode Channel Frequency(M Hz) TX Type ANT No. T_on (ms) Period (ms) Dut…

Text truncated - open the document above for the full version.