2ADTD-MTMCH208Helmet Camera

Helmet Camera Quick Start Guide English 1 English ©2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks ⚫ and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions. ⚫ Other trademarks and logos mentioned are the properties of their respective owners. Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY English 2 RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more English 3 of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC SAR statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the Directive 2014/30/EU (EMCD), Directive 2014/35/EU (LVD), Directive 2011/65/EU (RoHS). Directive 2012/19/EU (WEEE Directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info English 4 Directive 2006/66/EC and its amendment 2013/56/EU (Battery Directive): This product contains a battery that cannot be disposed of as unsorted municipal waste…

Text truncated - open the document above for the full version.

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Hangzhou Hikvision Digital Technology Co., Ltd. Address No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Grantee Code 2ADTD FCC ID 2ADTD-MTMCH208 Authorized Contact Name Long Cheng Contact Email [email protected] Contact Phone +8618969187825 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b)in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c)if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e)in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 2022-10-28 Print Name: Long Cheng Title: Testing & Certification Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Hangzhou Hikvision Digital Technology Co., Ltd. Date: 2022-11-01 Declaration Letter about Limited Use To whom it may concern, WE (Hangzhou Hikvision Digital Technology Co., Ltd.) HEREBY DECLARED THAT Our product Product Description: Helmet Camera Model No: DS-MCH208 FCC ID: 2ADTD-MTMCH208 The Bluetooth function integrated in RF module AP6214A(RF IC: SDIOV2.0) in this device has been disabled by software. Any modification will be highlighted on the release letter, and the impact analysis will also have a review. Verification procedure and verification results will be performed based on the release letter and impact analysis report. Sincerely yours, Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Long Cheng Title: Testing & Certification Engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.

Hangzhou Hikvision Digital Technology Co., Ltd. We, Hangzhou Hikvision Digital Technology Co., Ltd. declare that this EUT (FCC ID: 2ADTD- MTMCH208) can be operating on “US/Canada frequencies”. In addition, the frequency selection feature is disabled by firmware for devices marketed to the US and Canada. For DTS part of this device, only channels 1-11 will be used in North America. Country code selection is disabled. Should you have any questions or comments regarding this matter, Please have my best attention. Sincerely yours, Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Long Cheng Title: Testing & Certification Engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.

Hangzhou Hikvision Digital Technology Co., Ltd. Date: 2022-10-28 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ADTD-MTMCH208 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Long Cheng Title: Testing & Certification Engineer Signature: On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +8618969187825

Hangzhou Hikvision Digital Technology Co., Ltd. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Regarding: Confidentiality Request regarding application for FCC ID: 2ADTD-MTMCH208 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Long Cheng Title: Testing & Certification Engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd. Tune up

Compliance Certification Services (Kunshan) Inc. Page: 1 of 5 External Photos for KSCR2210002068AT Compliance Certification Services (Kunshan) Inc. Page: 2 of 5 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Page: 3 of 5 Compliance Certification Services (Kunshan) Inc. Page: 4 of 5 Compliance Certification Services (Kunshan) Inc. Page: 5 of 5

Compliance Certification Services (Kunshan) Inc. Page: 1 of 12 Internal Photos for KSCR2210002068AT Compliance Certification Services (Kunshan) Inc. Page: 2 of 12 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Page: 3 of 12 Compliance Certification Services (Kunshan) Inc. Page: 4 of 12 Compliance Certification Services (Kunshan) Inc. Page: 5 of 12 Compliance Certification Services (Kunshan) Inc. Page: 6 of 12 Compliance Certification Services (Kunshan) Inc. Page: 7 of 12 Compliance Certification Services (Kunshan) Inc. Page: 8 of 12 Compliance Certification Services (Kunshan) Inc. Page: 9 of 12 Compliance Certification Services (Kunshan) Inc. Page: 10 of 12 Compliance Certification Services (Kunshan) Inc. Page: 11 of 12 Compliance Certification Services (Kunshan) Inc. Page: 12 of 12

Compliance Certification Services (Kunshan) Inc. Report No.: KSCR221000206802 Page: 1 of 45 Eric Lin Laboratory Manager FCC SAR TEST REPORT Application No.: KSCR2210002068AT Applicant:Hangzhou Hikvision Digital Technology Co., Ltd Address of Applicant:No.555 Qianmo Road, Binjiang District, Hangzhou, 310052, China Manufacturer:Hangzhou Hikvision Digital Technology Co., Ltd Address of Manufacturer:No.555 Qianmo Road, Binjiang District, Hangzhou, 310052, China Factory: 1. Hangzhou Hikvision Technology Co., Ltd. 2.Hangzhou Hikvision Electronics Co., Ltd. 3. Chongqing Hikvision technology Co., Ltd. Address of Factory: 1. No.700,Dongliu Road, Binjiang District, Hangzhou City, Zhejiang, 310052, China 2. No.299,Qiushi Road, Tonglu Economic Development Zone, Tonglu County, Hangzhou,Zhejiang,311500,China 3. No. 118, Haikang Road, Area C, Jianqiao Industrial Park, Dadukou District, Chongqing, 401325, China Product Name:Helmet Camera Model No.(EUT): DS-MCH208 FCC ID:2ADTD-MTMCH208 Standard(s) : FCC 47CFR §2.1093 Date of Receipt: 2022-11-03 Date of Test: 2022-11-04 to 2022-11-04 Date of Issue: 2022-11-07 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Report No.: KSCR221000206802 Page: 2 of 45 REVISION HISTORY Revision Record VersionDescriptionDateRemark 00Original2022-11-07/ Authorized for issue by: Richard.Kong/ Project Engineer Eric.Lin/Reviewer Compliance Certification Services (Kunshan) Inc. Report No.: KSCR221000206802 Page: 3 of 45 TEST SUMMARY Maximum Reported SAR(W/kg) Frequency Band BodyExtremity WI-FI (2.4GHz)0.081.17 SAR Limited(W/kg)1.64.0 Compliance Certification Services (Kunshan) Inc. Report No.: KSCR221000206802 Page: 4 of 45 CONTENTS 1GENERAL INFORMATION..............................................................................................................................6 1.1GENERAL DESCRIPTION OF EUT.................................................................................................................6 1.1.1DUT Antenna Locations.......................................................................................................................7 1.2TEST SPECIFICATION..................................................................................................................................8 1.3RF EXPOSURE LIMITS.................................................................................................................................9 1.4TEST LOCATION.......................................................................................................................................10 1.5TEST FACILITY.........................................................................................................................................10 2LABORATORY ENVIRONMENT...................................................................................................................11 3SAR MEASUREMENTS SYSTEM CONFIGURATION.................................................................................12 3.1THE SAR MEASUREMENT SYSTEM............................................................................................................12 3.2ISOTROPIC E-FIELD PROBE EX3DV4.........................................................................................................14 3.3DATA ACQUISITION ELECTRONICS (DAE)...................................................................................................15 3.4SAM TWIN PHANTOM...............................................................................................................................15 3.5ELI PHANTOM..........................................................................................................................................16 3.6DEVICE HOLDER FOR TRANSMITTERS........................................................................................................17 3.7MEASUREMENT PROCEDURE.....................................................................................................................18 Scanning procedure........................................................................................................................................18 3.7.1Data Storage......................................................................................................................................20 3.7.2Data Evaluation by SEMCAD............................................................................................................20 4SAR MEASUREMENT VARIABILITY AND UNCERTAINTY........................................................................22 4.1SAR MEASUREMENT VARIABILITY..............................................................................................................22 4.2SAR MEASUREMENT UNCERTAINTY...........................................................................................................23 5DESCRIPTION OF TEST POSITION.............................................................................................................24 5.1THE TEST POSITION.................................................................................................................................24 6SAR SYSTEM VERIFICATION PROCEDURE..............................................................................................25 6.1TISSUE SIMULATE LIQUID..........................................................................................................................25 6.1.1Recipes for Tissue Simulate Liquid...................................................................................................25 6.1.2Test Liquids Confirmation..................................................................................................................26 6.1.3Measurement for Tissue Simulate Liquid..........................................................................................27 6.2SAR SYSTEM CHECK.................................…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Page: 1 of 28 Appendix C for KSCR221000206801 Calibration Certificate Object Apply No Model SN Calibration Date Dipole 1 CLA150 4025 2021/04/26 2 D450V3 1103 2021/04/21 3 D750V3 1188 2022/03/29 4 D835V2 4d114 2022/03/31 5 D900V2 1d079 2022/06/07 6 D1800V2 2d170 2022/03/31 7 D1900V2 5d1136 2022/06/07 8 D2000V2 1041 2022/06/06 9 D2300V2 1096 2022/03/31 10 D2450V2 817 2022/04/01 11 D2600V2 1158 2022/03/31 12 D5GHzV2 1095 2022/06/01 DAE 13 DAE4 1245 2022/05/30 Probe 14 EX3DV4 7346 2022/03/30 Compliance Certification Services (Kunshan) Inc. Page: 2 of 28 1 Di pol e 1.1 CLA150 - SN 4025 Compliance Certification Services (Kunshan) Inc. Page: 3 of 28 1.2 D450V3 - SN 1103 Compliance Certification Services (Kunshan) Inc. Page: 4 of 28 Compliance Certification Services (Kunshan) Inc. Page: 5 of 28 1.3 D750V3 - SN 1188 Compliance Certification Services (Kunshan) Inc. Page: 6 of 28 1.4 D835V2 - SN 4d114 Compliance Certification Services (Kunshan) Inc. Page: 7 of 28 Compliance Certification Services (Kunshan) Inc. Page: 8 of 28 1.5 D900V2 - SN 1d079 Compliance Certification Services (Kunshan) Inc. Page: 9 of 28 1.6 D1800V2 - SN 2d170 Compliance Certification Services (Kunshan) Inc. Page: 10 of 28 Compliance Certification Services (Kunshan) Inc. Page: 11 of 28 1.7 D1900V2 - SN 5d136 Compliance Certification Services (Kunshan) Inc. Page: 12 of 28 1.8 D2000V2 - SN 1041 Compliance Certification Services (Kunshan) Inc. Page: 13 of 28 Compliance Certification Services (Kunshan) Inc. Page: 14 of 28 1.9 D2300V2 - SN 1096 Compliance Certification Services (Kunshan) Inc. Page: 15 of 28 1.10 D2450V2 - SN 817 Compliance Certification Services (Kunshan) Inc. Page: 16 of 28 Compliance Certification Services (Kunshan) Inc. Page: 17 of 28 1.11 D2600V2 - SN 1158 Compliance Certification Services (Kunshan) Inc. Page: 18 of 28 1.12 D5GHzV2 - SN 1095 Compliance Certification Services (Kunshan) Inc. Page: 19 of 28 Compliance Certification Services (Kunshan) Inc. Page: 20 of 28 Compliance Certification Services (Kunshan) Inc. Page: 21 of 28 2 DA E4 - SN 1245 Compliance Certification Services (Kunshan) Inc. Page: 22 of 28 3 EX3DV4 - SN 7346 Compliance Certification Services (Kunshan) Inc. Page: 23 of 28 Compliance Certification Services (Kunshan) Inc. Page: 24 of 28 Compliance Certification Services (Kunshan) Inc. Page: 25 of 28 Compliance Certification Services (Kunshan) Inc. Page: 26 of 28 Compliance Certification Services (Kunshan) Inc. Page: 27 of 28 Compliance Certification Services (Kunshan) Inc. Page: 28 of 28 4 I m pedance and ret ur n l oss Dipole CLA150 SN 4025 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2021/4/26 -31.4 / 47.8 / Dipole D450V3 SN 1103 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2021/4/21 -23 / 57.1 /

HL GLOBAL © Copyright 2022 HL Global Inc. All Rights Reserved. PROPRIETARY AND CONFIDENTIAL PRELIMINARY ENGINEERING DATASHEET FL24WP01HK HL GLOBAL 850 NEW BURTON ROAD. SUITE 201, DOVER, DE 19904 UNITED STATES OF AMERICA INFORMATION: [email protected] H HL TECHNOLOGIESL[Type here] HL GLOBAL FL24WP01HK © Copyright 2022 HL Global Inc. All Rights Reserved. PROPRIETARY AND CONFIDENTIAL Datasheet Revision History Revision Date Change Log FL24WP01HK/ Rev.01 8 th /Mar /2022 Preliminary Datasheet 1.0 Disclaimer The information in this document is provided for a specific HL Global product and is proprietary and confidential. HL Global reserves the right to make changes at any time, without notice. HL Global reserves all rights to this document and the information contained herein. Reproduction or disclosure of the document to third parties without express permission is strictly prohibited. Please kindly confirm antenna product details with HL Global before finalizing your product design. H HL TECHNOLOGIESL[Type here] HL GLOBAL FL24WP01HK © Copyright 2022 HL Global Inc. All Rights Reserved. PROPRIETARY AND CONFIDENTIAL Tables of Contents 1. Antenna Product Description ................................................................................................................ 4 2. Features Overview ................................................................................................................................ 4 3. Product Photographs ............................................................................................................................ 4 4. Antenna Specification Summary ........................................................................................................... 5 5. Principal Dimensions ............................................................................................................................ 6 6. Return Loss ........................................................................................................................................... 6 7. Radiation Pattern Characteristics .......................................................................................................... 7 7. Realized Efficiency and Peak Realized Gain ............................................................................................ 8 9. Assembly Drawing .............................................................................................................................. 10 Figures Figure 1. Photo of HL GLOBAL antenna FL24WP01HK. ..................................................................................... 4 Figure 2. Basic dimensions and tolerances of FL24WP01HK antenna............................................................... 6 Figure 3. Measured Return Loss of FL24WP01HK. ............................................................................................ 6 Figure 4.FL24WP01HK antenna for radiation pattern measurements. Coordinate system used for radiation pattern ............................................................................................................................................................... 7 Figure 5.Measured radiation pattern characteristics in principal planes at 2.4GHz. ........................................ 7 Figure 6.Measured Realized Efficiency over frequency. .................................................................................... 8 Figure 7.Measured Peak Realized gain over frequency..................................................................................... 8 Figure 8.Assembly Drawing. ............................................................................................................................. 10 Tables Table 1. FL24WP01HK antenna specification summary. .................................................................................. 5 Table 2.Summary of peak realized gain and realized efficiency results. ........................................................... 9 H HL TECHNOLOGIESL[Type here] HL GLOBAL FL24WP01HK © Copyright 2022 HL Global Inc. All Rights Reserved. PROPRIETARY AND CONFIDENTIAL 1. Antenna Product Description FL24WP01HK Embedded Antenna features provides a high performance, off-board and Pogo pin-fed antenna solution. It was designed for 2400-2500MHz band applications including WIFI. 2. Features Overview FL24WP01HK Embedded Antenna features  Covering 2400-2500MHz freq  Superior performance  3.0dBi@2500MHz  Off-board, low profile design  Low Cost, High performance 3. Product Photographs Figure 1. Photo of HL GLOBAL antenna FL24WP01HK. H HL TECHNOLOGIESL[Type here] HL GLOBAL FL24WP01HK © Copyright 2022 HL Global Inc. All Rights Reserved. PROPRIETARY AND CONFIDENTIAL 4. Antenna Specification Summary Wireless Standard WIFI Frequency Range 2400-2500MHz Peak Realized Gain 3.0dBi@2500MHz Realized Efficiency 24%@2500MHz Return Loss >10dB Polarization Linear Polarization Radiation Pattern Omni-directional Feed Impedance 50Ω Power Handling 30dBm Antenna Structure FPC Feeding Description Pogo pin-fed Antenna Dimensions 13.3*15.6*0.12 (mm) Weight 0.262g Temperature Range Operating temperature: -40° C to +75° C (-40° F to +167° F) Storage temperature: -40° C to +85° C (-40° F to +185° F) Table 1. FL24WP01HK antenna specification summary. H HL TECHNOLOGIESL[Type here] HL GLOBAL FL24WP01HK © Copyright 2022 HL Global Inc. All Rights Reserved. PROPRIETARY AND CONFIDENTIAL 5. Principal Dimensions Figure 2. Basic dimensions and tolerances of FL24WP01HK antenna. 6. Return Loss Return Loss (RL) were measured using Keysight E5071B Vector Network Analyzer (VNA). Figure 3. Measured Return Loss of FL24WP01HK. H HL TECHNOLOGIESL[Type here] HL GLOBAL FL24WP01HK © Copyright 2022 HL Global Inc. All Rights Reserved. PROPRIETARY AND CONFIDENTIAL 7. Radiation Pattern Characteristics Radiation characteristics for FL24WP01HK were measured on abs board in Satimo SG24L anechoic chamber. Figure 4.FL24WP01HK antenna for radiation pat…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Report No.: KSCR221000206801 Page: 1 of 134 Eric Lin Laboratory Manager TEST REPORT Application No.: KSCR2210002068AT FCC ID: 2ADTD-MTMCH208 Applicant: Hangzhou Hikvision Digital Technology Co., Ltd Address of Applicant: No.555 Qianmo Road, Binjiang District, Hangzhou, 310052, China Manufacturer: Hangzhou Hikvision Digital Technology Co., Ltd Address of Manufacturer: No.555 Qianmo Road, Binjiang District, Hangzhou, 310052, China Factory: 1. Hangzhou Hikvision Technology Co., Ltd. 2.Hangzhou Hikvision Electronics Co., Ltd. 3. Chongqing Hikvision technology Co., Ltd. Address of Factory: 1. No.700,Dongliu Road, Binj…

Text truncated - open the document above for the full version.