2ADTD-UVCX12R01Remote

Portable Conference Camera User Manual 1 Packing List Camera Remote Control Quick Start Guide USB Cable User Manual Privacy Shutter User Manual Card Indicator Functions Mute Hyperlink Page Up Pan/Tilt Control Zoom In/Out Volume Page Down Turn On/Off Camera 2 Press the button to zoom in/out by level. Press and hold the button to adjust the camera continuously. Pan/tilt the camera. Press the button to adjust the camera by level. Press and hold the button to adjust the camera continuously. Turn on/off the pickup function of the camera. Turn on/off video streaming. Adjust the volume of speaker. Press the button to adjust the volume by level. Press and hold the button to adjust the volume continuously. Scroll the file page. Restore to the default settings. Press and hold the two buttons at the same time for 5 seconds, and the indicator of the device flashes red three times. Restart the device and it returns to the default settings. Double-click to enter the hyperlink. Click one time to switch the hyperlink. 3 Microphone USB Type C Lens Lens Adjusting Scroll Power Indicator Status Indicator 4 Power Indicator Status Indicator Solid Red: Power is lower than 15% Solid Orange: Power is lower than 30% Solid White: Power is more than 30% Solid Red: Mute Solid White: Working Normally No Light: Standby 5 USB Cable USB3.0 Connect the device to an intelligent terminal, such as a computer or conference flat panel. The device starts to charge when connected to a computer. Connection USB Cable Connection & Charging 6 Mute Camera Select Camera Default Settings 1080P CONF Camera Select Microphone Select Speaker Default Settings 1080P CONF Camera-Audio Default Settings 1080P CONF Camera-Audio Setup Guide Power on the device and open the conference/video software. Select the speaker and microphone as 1080P CONF Camera-Audio, and select the Camera as 1080P CONF Camera. Take the actual product name as standard. 7 Using Guide Open the battery cover and remove the battery pull tab before using. 8 Press the remote control with both hands and rotate it in the direction of arrow to open the battery cover. 9 Adjust the view angle. -10°~10° 10 The privacy shutter and remote control can be magnetically attached to the device. 11 Safety Instruction Warnings Laws and Regulations The device should be used in compliance with local laws, electrical safety regulations, and fire prevention regulations. Electrical Safety The socket-outlet shall be installed near the equipment and shall be easily accessible. Battery Do not ingest battery. Chemical burn hazard! This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. CAUTION: Risk of explosion if the battery is replaced by an incorrect type. Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types). Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion. Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas. Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas. Dispose of used batteries according to the instructions. Cautions Fire Prevention No naked flame sources, such as lighted candles, should be placed on the equipment. Installation Install the equipment according to the instructions in this manual. FAQ Visithttp://enpinfodata.hikvision.com/analysisQR/showQR/35d08787for frequently asked questions. 12 Never place the equipment in an unstable location. The equipment may fall, causing serious pe rsonal injury or death. DO NOT touch the sharp edges or corners. Transportation Keep the device in original or similar packaging while transporting it. DO NOT drop the product or subject it to physical shock. Power Supply EUT will be charged by specified source which the output circuit comply with LPS/PS 2. Refer to the device label for the standard power supply. Please make sure your power supply matches with your device. Use a power adapter provided by qualified manufacturers. It is recommended to provide an independent power adapter for each dev ice as adapter overload may cause over-heating or a fire hazard. Maintenance If the product does not work properly, please contact your dealer or the nearest service center. We shall not assume any responsibility for problems caused by unauthorized repair or maintenance. Cleaning Please use a soft and dry cloth to clean the interior and exterior surfaces. Do not use alkaline detergents. Using Environment When any laser equipment is in use, make sure that the device lens is not exposed to the laser beam, or it may burn out. DO NOT aim the lens at the sun or any other bright light. To avoid heat accumulation, good ve ntilation is required for a proper operating environment. DO NOT expose the device to extremely hot, cold, dusty, corrosive, saline-alkali, or damp environments. For temperature and humidity requirements, see device specification. DO NOT expose the device to high electromagnetic radiation. Emergency If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center. Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This product has been tested and found to comply with the lim…

Text truncated - open the document above for the full version.

Applicant Declaration Applicant Declaration Rev: 0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Hangzhou Hikvision Digital Technology Co., Ltd. Address No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Grantee Code 2ADTD FCC ID 2ADTD-UVCX12R01 Authorized Contact Name Long Cheng Contact Email [email protected] Contact Phone +8618969187825 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, prov id e a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit sur veil lance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has r ead, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and condit ions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rul es -regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt- gs t.nsf/eng/sf01130.html Applicant Signature: Date: 2022-08-19 Print Name: Long Cheng Title: Testing & Certification Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Hangzhou Hikvision Digital Technology Co., Ltd. Current Date: 2022-08-19 To : SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Dear Sir/Madam, Subject: Declaration Letter about Identity of Products *WE (Hangzhou Hikvision Digital Technology Co., Ltd.) HEREBY DECLARED THAT Product Description Remote Model No. Hi-UV12-R01 Manufacturer’s Name Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturer’s Address No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China *Except that the model number and trade mark deviation, are identical with the original product as follows: Note: The definition of identical should be “electrically identical”. A device will be considered to be electrically identical if no changes are made to the devices’ schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical with the model(s) below which sample(s) we chose to be tested by SGS: Model No. (型号): DS-UVC-X12-R01 Manufacturer’s Name (生产商名称): Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturer’s Address（生产商商地址): No.555 Qianmo Road, Binjiang District , Hangzhou 310052, China Sincerely, Signature (签字): Printed Name (姓名): Long Cheng Position/Title (职位): Testing & Certification Engineer Contact Number (联系电话): +8618969187825

Hangzhou Hikvision Digital Technology Co., Ltd. Date: 2022-08-19 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ADTD-UVCX12R01 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Long Cheng Title: Testing & Certification Engineer Signature: On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +8618969187825

Hangzhou Hikvision Digital Technology Co., Ltd. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Regarding: Confidentiality Request regarding application for FCC ID : 2ADTD-UVCX12R01 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commis sion’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary in formation not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Long Cheng Title : Testing & Certification Engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.

Compliance Certification Services (Kunshan) Inc. Page: 1 of 2 External Photos for KSCR2207001282AT Test Model No.: DS-UVC-X12-R01 Compliance Certification Services (Kunshan) Inc. Page: 2 of 2 EUT Constructional Details (EUT Photos) Model: DS-UVC-X12-R01

Model: DS-UVC-X12-R01 Model: Hi-UV12-R01 Remark:It’s hard to put FCC statement on the product due to device’s irregular appearance. FCC statement will be placed in the user manual which the device is marketed.

Compliance Certification Services (Kunshan) Inc. Page: 1 of 6 Internal Photos for KSCR2207001282AT Test Model No.: DS-UVC-X12-R01 Compliance Certification Services (Kunshan) Inc. Page: 2 of 6 EUT Constructional Details (EUT Photos) Model: DS-UVC-X12-R01 Compliance Certification Services (Kunshan) Inc. Page: 3 of 6 Compliance Certification Services (Kunshan) Inc. Page: 4 of 6 Compliance Certification Services (Kunshan) Inc. Page: 5 of 6 Compliance Certification Services (Kunshan) Inc. Page: 6 of 6

Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220700128202 Page: 1 of 13 Eric Lin EMC Laboratory Manager 1 Cover Page RF Exposure Evaluation Report Application No.: KSCR2207001282AT FCC ID: 2ADTD-UVCX12R01 IC: 20199-UVCX12R01 Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Applicant: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Manufacturer: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Manufacturer: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Factory: 1.Hangzhou Hikvision Technology Co., Ltd. 2.Hangzhou Hikvision Electronics Co., Ltd. 3.Chongqing Hikvision technology Co., Ltd. Address of Factory: 1.No.700,Dongliu Road, Binjiang District, Hangzhou City,Zhejiang, 310052, China 2.No.299,Qiushi Road,Tonglu Economic Development Zone,Tonglu County, Hangzhou,Zhejiang,311500,China 3.No. 118,Haikang Road,Area C, Jinqiao Industrial Park, Dadukou District, Chongqing, 401325, China Equipment Under Test (EUT): EUT Name: Remote Model No.: DS-UVC-X12-R01,Hi-UV12-R01¤ Trade mark: HIKVISION, HiLook Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 RSS-102 Issue 5 Amendment 1 (February 2, 2021) Date of Receipt: 2022-07-22 Date of Test: 2022-08-02 to 2022-08-03 Date of Issue: 2022-08-11 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220700128202 Page: 2 of 13 Revision Record Version Chapter Date Modifier Remark 01 2022-08-11 Original Authorized for issue by: Damon_Zhou/Project Engineer Eric Lin /Reviewer Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220700128202 Page: 3 of 13 2 Contents Page 1 COVER PAGE .................................................................................................................................... 1 2 CONTENTS ........................................................................................................................................ 3 3 GENERAL INFORMATION ................................................................................................................ 4 3.1 GENERAL DESCRIPTION OF E.U.T. ................................................................................................ 4 3.2 DETAILS OF E.U.T. ....................................................................................................................... 4 3.3 SEPARATION DISTANCE ................................................................................................................ 5 3.4 TEST LOCATION ............................................................................................................................ 6 3.5 TEST FACILITY .............................................................................................................................. 6 4 FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS .......................................................... 7 4.1 BLANKET 1 MW BLANKET EXEMPTION ........................................................................................... 7 4.2 MPE-BASED EXEMPTION .............................................................................................................. 7 4.3 SAR-BASED EXEMPTION ............................................................................................................... 8 4.4 IC RADIOFREQUENCY RADIATION EXPOSURE LIMITS ..................................................................... 11 5 MEASUREMENT AND CALCULATION .......................................................................................... 12 5.1 MAXIMUM TRANSMIT POWER ....................................................................................................... 12 5.2 RF EXPOSURE CALCULATION ...................................................................................................... 13 Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220700128202 Page: 4 of 13 3 General Information 3.1 General Description of E.U.T. Power supply: DC 3V by CR2032 Battery Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. BLE Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Data Rate: 1Mbps, 2Mbps Antenna Type: PCB Antenna Antenna Gain: 0dBi (Provided by the manufacturer) S/N: K13986475 Firmware version: V5100 Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220700128202 Page: 5 of 13 3.3 Separation Distance Separation distance between the antenna to person (R): 5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220700128202 Page: 6 of 13 3.4 Test Location All tests were performed at: Compliance Certification Services (Kunshan) Inc. No.10 Weiye Rd, Innovation park, Eco&Tec, Development Zone, Kunshan City, Jiangsu, China. Tel: +86 512 5735 5888 Fax: +86 512 5737 0818 No tests were sub-contracted. Note: 1.SGS is not responsible for wrong test results due to incorrect information (e.g. max. clock frequency, highest internal frequency, antenna gain, cable loss, etc ) is provided by the applicant. (if applicable). 2.SGS is not responsible for the authenticity, integrity and the validity of the conclusion based on results of the data provided by applicant. (if applicable). 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L4354) CNAS has accredited Compliance Certification Services (Kunshan) Inc. to ISO/IEC 17025:2017 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criter…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220700128201 Page: 1 of 78 Eric Lin Laboratory Manager TEST REPORT Application No.: KSCR2207001282AT FCC ID: 2ADTD-UVCX12R01 IC: 20199-UVCX12R01 Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Applicant: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Manufacturer: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Manufacturer: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Factory: 1.Hangzhou Hikvision Technology Co., Ltd. 2.Hangzhou Hikvision Electronics Co., Ltd. 3.Chongqing Hikvision technology Co., Ltd. Address of Factory: 1.No.700,Dongliu Road, Binjiang District, Hangzhou City,Zhejiang, 310052, China 2.No.299,Qiushi Road,Tonglu Economic Development Zone,Tonglu County, Hangzhou,Zhejiang,311500,China 3.No. 118,Haikang Road,Area C, Jinqiao Industrial Park, Dadukou District, Chongqing, 401325, China Equipment Under Test (EUT): EUT Name: Remote Model No.: DS-UVC-X12-R01, Hi-UV12-R01¤ ¤ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: HIKVISION, HiLook Standard(s) : 47 CFR Part 15, Subpart C 15.247 RSS-247 Issue 2, February 2017 RSS-Gen Issue 5 Amendment 2 (February 2021) Date of Receipt: 2022-07-22 Date of Test: 2022-08-02 to 2022-08-03 Date of Issue: 2022-08-11 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220700128201 Page: 2 of 78 Revision Record Version Chapter Date Modifier Remark 01 2022-08-11 Original Authorized for issue by: Damon_Zhou/Project Engineer Eric Lin /Reviewer Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220700128201 Page: 3 of 78 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Customer Declaration Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass 99% Bandwidth RSS-247 Issue 2, February 2017 ANSI C63.10 Section 6.9.3 RSS-Gen Section 6.7 Pass Declaration of EUT Family Grouping: Note1: There are series models mentioned in this report, and they are the identical in electrical and electronic characters. Only the model DS-UVC-X12-R01 was tested since their differences were the model number and trade mark. Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220700128201 Page: 4 of 78 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 3 3 CONTENTS ................................................................................................................................................ 4 4 GENERAL INFORMATION ........................................................................................................................ 6 4.1 DETAILS OF E.U.T. ............................................................................................................................... 6 4.2 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 6 4.3 MEASUREMENT UNCERTAINTY .............................................................................................................. 6 4.4 TEST LOCATION .................................................................................................................................... 7 4.5 TEST FACILITY ...................................................................................................................................... 7 4.6 DEVIATION FROM STANDARDS ............................................................................................................... 7 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 7 5 EQUIPMENT LIST ...................................................................................................................................... 8 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ................................................................................. 9 6.1 ANTENNA REQUIREMENT ...................................................................................................................... 9 6.1.1 Test Requirement: ......................................................................................................................... 9 6.1.2 Conclusion ..................................................................................................................................... 9 7 RADIO SPECTRUM MATTER TEST RESULTS ..................................................................................... 10 7.1 CONDUCTED …

Text truncated - open the document above for the full version.

Antenna Specification 1. Antenna Type: PCB Antenna 2. Peak Gain：0dBi 3. Antenna Size: 5mm*15mm 4. Antenna Appearance Frequency（MHz） gain（dBi） 2400 -0.3 2450 -0.1 2480 0 5. 2D Pattern Horizontal (2400 MHz) Vertical (2400 MHZ) Horizontal (2450 MHZ) Vertical (2450 MHZ) Horizontal (2480 MHZ) Vertical (2480 MHZ)

Compliance Certification Services (Kunshan) Inc. Page: 1 of 3 Appendix Photographs of Test Setup for KSCR2207001282AT Test Model No.: DS-UVC-X12-R01 Compliance Certification Services (Kunshan) Inc. Page: 2 of 3 Test Setup Photo RF Conducted Test Setup Radiated Spurious Emissions Test Setup 30MHz to 1GHz Compliance Certification Services (Kunshan) Inc. Page: 3 of 3 Radiated Spurious Emissions Test Setup Above 1GHz Zoom