2ADTO-PLT-001GPS Tracker

QSG UbTrack™ 201 1 1 3 5 4 2 SECTION 1 Aspenta UbTrack 201 Portable GPS Locaator with Extended Life Battery Quick Start Guide SECTION 2 UbTrack™ 201 Overview Note: Your UbTrack™ wireless key fob has to paired with your device after installation and activation. UbTrack™ key fob automates arming and disarming of the UbTrack™ 301 security feature. Please keep it with you on your keychain. 1- Power Button 2- Status Light 3- SOS button 4- Reset button 5- Charging Port 6- Functional button 7-Status Light For a complete UbTrack user rmanual, FAQs and troubleshooting tips please go to http://aspenta.com/ SECTION 3 It is strongly recommended that you record and save the 12 character device ID number below the barcode on the back of your UbTrack™ 101 locator. It is also recommended that you read the owner’s manual thoroughly prior to operating your device. Device ID: _ _ _ _ - _ _ _ _ - _ _ _ _ 6 7 QSG UbTrack™ 201 2 SECTION 4 To begin using your UbTrack™ locator, please follow these easy steps: STEP 1 Charge You should charge your UbTrack™ 201 locator for at least 4 hours prior to first use. Connect the Mini-USB cable to the UbTrack and the AC Adapter, and plug it in to an electrical outlet. STEP 2 Connect Next you need to create a free UbWall™ account to register, activate, program, and monitor your UbTrack™ 201 locator. This can be done online from your computer, or via your smartphone. For your security, establishing your UbWall™ account is a two step process, requiring verification of your email address. STEP 3 Activate Once you have created and verified your UbWall™ account, you can now log in and select the “Add a Device” option to add and activate your new UbTrack™ 201 device and configure it. STEP 4 Adjust You are now ready to begin using your device. If you have chosen to track the device continuously, then simply click on your device within UbWall™ to see its’ location or location history displayed on a map. If, for privacy reasons, you have chosen to configure your device to transmit your location information only in the event of an alarm, you can still use UbWall™ to manage and adjust the Control from your Computer www.UbWall.com Download the UbWall™ Mobile App & access your connected devices on the go! QSG UbTrack™ 201 3 device settings, program your email and SMS notifications, share your device with other UbWall users, etc. SECTION 5 Key Fob Pairing SECTION 6 Warranty Your UbTrack™ Locator has a Limited Warranty for 12 months from the date of purchase against all defects in materials and workmanship. For full details regarding our Limited Warranty please visit www.aspenta.com/warranty SECTION 7 © Copyright 2014 Aspenta. All rights reserved. Aspenta and Aspenta UbTrack are trademarks or registered trademarks of Aspenta, LLC. in the U.S., Canada, and/or other countries. V1.0 FCC ID: 2ADTO-PLT-001 changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

ASPENTA Authority to Act as Agent Date: __10_DEC_2014____ To Whom It May Concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Vicky Yuan in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all matters relating to all processes required in FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: ___12 months_____ By: Walid Moneimne (Signature) (Print name) Title: Product Development On behalf of: Aspenta International LLC (Company Name) Telephone: +1(727)488-4100

Aspenta international FZ-LLC Request for Confidentiality Date: _2014/12/26______ Subject: Confidentiality Request for: FCC ID: 2ADTO-PLT-001 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ Aspenta international FZ-LLC has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180 ) 2 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TCB in the event information regarding the product or the product is made available to the public. TCB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: Walid Moneimne (Signature/Title 3 )(Print name)

1 PHOTOGRAPHS - EUT CONSTRUCTIONAL DETAILS Test model No.: PLT-001

high:7.5mm Width:20.6mm font color: white

1 Photographs - EUT Constructional Details Test model No.: PLT-001

SGS-CSTC Standards Technical Services Co., Ltd. No. 1 Workshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM141100609203 Page: 1 of 9 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page SAR Evaluation Report Application No.: SZEM1411006092HR Applicant: Aspenta International FZ-LLC Product Name: GPS Tracker Model No.(EUT): PLT-001 Trade Mark: FCC ID: 2ADTO-PLT-001 Standards: 47 CFR Part 2.1093 (2014) KDB447498D01 General RF Exposure Guidance v05r20 Tracking Number: 340466 Date of Receipt: 2014-11-06 Date of Test: 2014-12-16 to 2015-01-08 Date of Issue: 2015-02-11 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM141100609203 Page: 2 of 9 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Version Revision Record Version Chapter Date Modifier Remark 00 2015-02-11 Original Authorized for issue by: Tested By 2015-01-08 (Chris Zhong) /Project Engineer Date Prepared By 2015-02-11 (Hedy Wen) /Clerk Date Checked By 2015-02-11 (Emen Li) /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM141100609203 Page: 3 of 9 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 3 Contents Page 1 COVER PAGE ....................................................................................................................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Ltd. No. 1 Workshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM141100609202 Page: 1 of 29 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page Appendix B for Test Report SZEM141100609202 SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM141100609202 Page: 2 of 29 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Content Page 1 COVER PAGE ...................................................................................................................................................... 1 APPENDIX B FOR TEST REPORT SZEM141100609202 ..................................................................................... 1 2 CONTENT ............................................................................................................................................................. 2 3 APPENDIX_A: EFFECTIVE (ISOTROPIC) RADIATED POWER OUTPUT DATA ................................... 3 PART I - TEST RESULTS ........................................................................................................................................... 3 4 APPENDIX_B: PEAK-TO-AVERAGE RATIO ................................................................................................. 5 PART I - TEST RESULTS ........................................................................................................................................... 5 5 APPENDIX_C: MODULATION CHARACTERISTICS ................................................................................... 6 PART I - TEST PLOTS ................................................................................................................................................. 6 5.1 FOR GSM ..................................................................................................................................................... 6 5.1.1 Test Band = GSM850 ............................................................................................................................ 6 5.1.2 Test Band = GSM1900.......................................................................................................................... 7 6 APPENDIX_D: BANDWIDTH ............................................................................................................................ 8 6.1 FOR GSM ..................................................................................................................................................... 9 6.1.1 Test Band = GSM850 ..................................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Ltd. No. 1 Workshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM141100609202 Page: 1 of 26 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page FCC RF TEST REPORT Application No: SZEM1411006092HR Applicant: Aspenta International FZ-LLC Product Name: GPS Tracker Mode No.(EUT): PLT-001 Trade Mark: FCC ID: 2ADTO-PLT-001 Standards: 47 CFR Part 2（2014） 47 CFR Part 22 subpart H（2014） 47 CFR Part 24 subpart E（2014） Test Method: FCC KDB 971168 D01 Power Meas License Digital Systems v02r02 NOTE: In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM141100609202 Page: 2 of 26 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Notice 2.1 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • VCCI The 10m Semi-anechoic chamber and Shielded Room (7.5m x 4.0m x 3.0m) of SGS- CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-823, R-4188, T-1153 and C-2383 respectively. • FCC – Registration No.: 556682 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration No.: 556682. • Industry Canada (IC) Two 3m Semi-anechoic chambers of SGS- CSTC Standards Technical Services Co., Ltd. have been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 4620C-1 & 4620C-2. 2.2 Deviation from Standards None. 2.3 Abnormalities from Standard Conditions None. 2.4 Other Information Requested by the Customer None. SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM141100609202 Page: 3 of 26 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/t…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS - EUT TEST SETUP Test model No.: PLT-001 1.1 CON DU CTED EM ISSI ON 1.2 RADI ATE D EM ISS IO N 1.3 RADI ATE D SP URI OU S EM ISSIO N 1.4 GSM TR ANSM ITTE R