2ADTO-PST-001GPS Tracker

QSG UbTrack™ 101 1 1 2 3 4 5 SECTION 1 Aspenta UbTrack™ 101 Ultra-Compact Portable GPS Locator Quick Start Guide SECTION 2 - UbTrack™ 101 Overview 1- Power button 2- Charging Port 3- Status Light 4- Reset button 5- SOS button For FAQs, troubleshooting tips or to download the lastest user manual, please visit http://aspenta.com/ SECTION 3 It is strongly recommended that you record and save the 12 character device ID number below the barcode on the back of your UbTrack™ 101 locator. It is also recommended that you read the owner’s manual thoroughly prior to operating your device. Device ID: _ _ _ _ - _ _ _ _ - _ _ _ _ QSG UbTrack™ 101 2 SECTION 4 To begin using your UbTrack™ locator, please follow these easy steps: STEP 1 Charge You should charge your UbTrack™ 101 locator for at least 3 hours prior to first use. Connect the Mini-USB cable to the UbTrack and the AC Adapter, and plug it in to an electrical outlet. STEP 2 Connect Next you need to create a free UbWall™ account to register, activate, program, and monitor your UbTrack™ 101 locator. This can be done online from your computer, or via your smartphone. For your security, establishing your UbWall™ account is a two step process, requiring verification of your email address. STEP 3 Activate Once you have created and verified your UbWall™ account, you can now log in and select the “Add a Device” option to add and activate your new UbTrack™ 101 device and configure it. STEP 4 Adjust You are now ready to begin using your device. If you have chosen to track the device continuously, then simply click on your device within UbWall to see its’ location or location history displayed on a map. Control from your Computer www.UbWall.com Download the UbWall™ Mobile App & access your connected devices on the go! QSG UbTrack™ 101 3 If, for privacy reasons, you have chosen to configure your device to transmit your location information only in the event of an alarm, you can still use UbWall™ to manage and adjust the device settings, program your email and SMS notifications, share your device with other UbWall users, etc. SECTION 5 Warranty Your UbTrack™ Locator has a Limited Warranty for 12 months from the date of purchase against all defects in materials and workmanship. For full details regarding our Limited Warranty please visit www.aspenta.com/warranty SECTION 6 © Copyright 2014 Aspenta. All rights reserved. Aspenta and Aspenta UbTrack are trademarks or registered trademarks of Aspenta, LLC. in the U.S., Canada, and/or other countries. V1.0 FCC ID: 2ADTO-PST-001 changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Search|RSS |Updates |E-Filing |Initiatives |Consumers |Find People Office of Engineering and Technology FCC > FCC E-filing > Inquiry System Home Page > View Inquiry FCC Site Map OET Home Page Site Options Basic KDB Search Advanced KDB Search Submit an Inquiry Reply to an Inquiry Response Category List FAQ Search Major Guidance Publications Draft Laboratory Division Publications Draft Laboratory Division Publications (Expired) Draft Publication Moderation Policy Related Sites Equipment Authorization Presentations Equipment Authorization System (EAS) Telecommunications Certification Bodies (TCB) Measurement Procedures Reply to an OET Inquiry Response Currently Displaying Inquiry Tracking Number:340466 Contact Information: Customer First Name: Evan Customer Last Name: Mi Telephone Number: +86 (0755) 2532 8626 Extension: E-mail Address: [email protected] Address: Line 1: Line 2: P.O. Box: City: State: Zip Code: Country: Inquiry Details on 12/23/2014: First category: RF Exposure * Second category: SAR (RF Exposure) Third category: Subject: Low transmission duty factor devices Inquiry: Dear Sir/Madam, Here is a location tracker,it supports GSM850/1900 without any voice mode,when the device is power on,it stays on stand by mode. If I press the SOS button,the device will send the location message through the GSM network every 30 seconds,then I can see the meassage through a APP or in the computer. The time of a frame for GSM network is 4.615ms?every frame contains 8 timeslots,for this device the duty cycle is less than 10*Lg(4.615/30000)=-38dB, the Max. power of the device is 34dBm,so the averge power of the device is less than -4dBm. So for the SAR test,whether can the KDB 447498 D01 General RF Exposure Guidance v05r02 section 6.3. "Low transmission duty factor devices" applies? and not need to do SAR test? ---Reply from Customer on 01/08/2015--- Dear Sir/Madam, I'am urgent to need your guidance,please give some advice ,thanks! FCC Response on 01/09/2015: It is appropriate to consider duty factor analysis in lieu of SAR testing for tracking devices that do not provide voice-mode communication. Please provide the following information: 1] Does this device provide for continuous tracking? 2] What is the minimum time (shortest interval) between transmissions? 3] What is the maximum transmission time? 4] Does the GSM module have a FCC ID? 5] What is the maximum number of slots utilized; for example, is it GPRS Class 10? OET Inquiry System Inquiry Tracking Number 340466 ERP power is generally not useful; we need to know average conducted power. Unless it can be shown otherwise, since this is a small device that can be placed almost anywhere, we will need to use a default minimum test separation distance of 5mm in order to qualify for SAR test exclusion. ---Reply from Customer on 01/12/2015--- Dear Sir/Madam, 1] Does this device provide for continuous tracking? No,when the device is power on,it stays on stand by mode. If I press the SOS button,the device will send the location message(SMS) through the GSM network every 30 seconds 2] What is the minimum time (shortest interval) between transmissions? The minimum time (shortest interval) between transmissions is 30 seconds 3] What is the maximum transmission time? The maximum transmission time is 0.576875 ms 4] Does the GSM module have a FCC ID? No 5] What is the maximum number of slots utilized; for example, is it GPRS Class 10? It supports GSM only,the device send the location only through SMS The maximum conducted power of GSM850 is 32.56dBm,and maximum tune up limit is 34dBm; The maximum conducted power of GSM1900 is 30.43dBm,and maximum tune up limit is 32dBm. please see the above information and give your value advice,thanks! ---Reply from Customer on 01/19/2015--- Dear Sir/Madam, I'am urgent to need your guidance,please give some advice ,thanks! FCC Response on 01/20/2015: Because of the low duty factor for this device, as communicated through this KDB inquiry, it has been determined that SAR testing can be excluded. Proceed with TCB consultation and have the TCB submit a Permit-But-Ask (PBA) for this device. The TCB will need to reference KDB 340466 in the PBA. For certification purposes, instead of a SAR report, an attachment will serve as the RF exposure exhibit in the FCC Form 731. The attachment will explain why this device has been excluded from SAR testing by showing that the source-based time-averaged conducted output power meets the standalone SAR test exclusion threshold in KDB 447498, Section 4.3.1. Use a default minimum test separation distance of 5mm to qualify for SAR test exclusion. For an example of the documentation required, please review the RF exposure exhibit presented in TC 718299 for FCC ID: YQD-GL300. Enter any additional comments below: *(This is a text only field. Users will be able to upload attachments after clicking on the "Proceed" button below) OET Inquiry System Inquiry Tracking Number 340466 ProceedClear Please use the Submit Inquiry link at www.fcc.gov/labhelp to send any comments or suggestions for this site Federal Communications Commission 445 12th Street, SW Washington, DC 20554 More FCC Contact Information... Phone: 888-CALL-FCC (225-5322) TTY: 888-TELL-FCC (835-5322) Fax: 202-418-0232 E-mail: [email protected] - Privacy Policy - Web Policies & Notices - Customer Service Standards - Freedom of Information Act OET Inquiry System Inquiry Tracking Number 340466

Aspenta international FZ-LLC Authority to Act as Agent Date: __10_DEC_2014____ To Whom It May Concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Vicky Yuan in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all matters relating to all processes required in FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: ___12 months_____ By: Walid Moneimne (Signature) (Print name) Title: Product Development On behalf of: Aspenta International LLC (Company Name) Telephone: +1(727)488-4100

Aspenta international FZ-LLC Request for Confidentiality Date: _2014/12/26______ Subject: Confidentiality Request for: FCC ID: 2ADTO-PST-001 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ Aspenta international FZ-LLC has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180 ) 2 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TCB in the event information regarding the product or the product is made available to the public. TCB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: Walid Moneimne (Signature/Title 3 )(Print name)

1 Photographs - EUT Constructional Details Test model No.: PST-001

high:7.5mm Width:20.6mm font color: white 3.2mm 10.6mm

1 Photographs - EUT Constructional Details Test model No.: PST-001

No. 1 Workshop, M-10, Middle section, Science & Technology Park, District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensu system complies with all relevant standards. Any mention of International Electrical Approvals in connection with, distribution or use of the product described in this report must be ap SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service www.sgs.com/terms_and_conditions.htm and, for www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined the Any holder of this document is advised that information and within the limits of Client’s instructions, if any. The Company’s sole parties to a transaction from exercising all their rights and obligations under the tran except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or of this document is unlawful and offenders may be prosec this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” FCC Application No: SZEM Applicant: Aspenta International FZ Product Name: GPS Tracker Model No.(EUT): PST Trade Mark: FCC ID: 2ADTO Standards: 47 CFR 47 CFR 47 CFR Test Method: FCC KDB 971168 D01 Power Meas NOTE:In the configuration tested SGS-CSTC Standards Technical Services Ltd 10, Middle section, Science & Technology Park, Nanshan Shenzhen, Guangdong, China 518057 Report No.: SZEM Page: 1 of The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensu system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be ap SGS International Electrical Approvals in writing. ort must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of All test results in this report can be traceable to National or International Standards. Company subject to its General Conditions of Service printed overleaf, available on request or accessible at and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined the Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time o and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” FCC RF TEST REPORT SZEM1411006088HR Aspenta International FZ-LLC GPS Tracker PST-001 2ADTO-PST-001 47 CFR Part 2（2014） 47 CFR Part 22 subpart H（2014） 47 CFR Part 24 subpart E（2014） FCC KDB 971168 D01 Power Meas License Digital Systems v02r02 In the configuration tested, the EUT complied with the standards specified above. Technical Services Ltd. Report No.: SZEM141100608802 of 28 conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by ort must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of All test results in this report can be traceable to National or International Standards. inted overleaf, available on request or accessible at electronic format documents, subject to Terms and Conditions for Electronic Documents at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. contained hereon reflects the Company’s findings at the time of its intervention only responsibility is to its Client and this document does not exonerate documents. This document cannot be reproduced falsification of the content or appearance uted to the fullest extent of the law. Unless otherwise stated the results shown in REPORT License Digital Systems v02r02 standards specified above. SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM141100608802 Page: 2 of 28 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is dr…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Ltd. No. 1 Workshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM141100608801 Page: 1 of 67 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page FCC REPORT Application No: SZEM1411006088HR Applicant: Aspenta International FZ-LLC Product Name: GPS Tracker Model No.(EUT): PST-001 Trade Mark: FCC ID: 2ADTO-PST-001 Standards: 47 CFR Part 15, Subpart C (2014) Date of Receipt: 2015-02-02 Date of Test: 2015-02-03 to 2015-02-06 Date of Issue: 2015-02-10 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM141100608801 Page: 2 of 67 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Version Revision Record Version Chapter Date Modifier Remark 00 2015-02-10 Original Authorized for issue by: Tested By 2015-02-06 (Chris Zhong)/Project Engineer Date Prepared By 2015-02-10 (Sade Luo) /Clerk Date Checked By 2015-02-09 (Emen Li) /Reviewer Date SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM141100608801 Page: 3 of 67 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 3 Test Summary Test Item Test Requirement Test method Result Antenna Requirement 47 CFR Part 15, Subpart C Section 15.203/15.247 (c) ANSI C63.10 2009 PASS AC Power Line Conducted Emission 47 CFR Part 15, Subpart C Section 15.207 ANSI C63.10 2009 PASS Conducted Peak …

Text truncated - open the document above for the full version.

1 Photographs - EUT Test Setup Test model No.: PST-001 1.1 Conducted Emission 1.2 Radiated Emission 1.3 Radiated Spurious Emission 1.4 GSM transmitter