2ADUTLGPAU08150Mbps Wireless N USB Adapter With High Gain Antenna

150Mbps Wireless N USB Adapter With High Gain Antenna This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. such modifications could void the user’s authority to operate this equipment. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. SAR Statement This Product meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device PAU08 (FCC ID: 2ADUTLGPAU08) has been tested against this SAR limit. SAR information on this can be viewed on-line at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search.This device was tested for typical operations 5mm from the body. To maintain compliance with FCC RF exposure requirements, 5mm separation distance shall be . maintained to the user's bodies. FCC WARNNING

07/10/2015 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2ADUTLGPAU08 Product Name: 150Mbps Wireless N USB Adapter With High Gain Antenna Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 07/10/2015 By: Albert Fu Signature Printed Title: President On behalf of : Panda Wireless, Inc Telephone: 408 827 8106

Panda Wireless, Inc Spet. 08, 2015 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2ADUTLGPAU08 Product Name: 150Mbps Wireless N USB Adapter With High Gain Antenna To Whom It May Concern: We will apply FCC DOC at MRA lab which is recognized and authorized by FCC， and we will not sell the products with labels marked FCC ID and FCC DOC until FCC DOC and FCC ID are issued (只有获得了A2LA（美国实验室认可协会）或NVLAP（美国国家实验室认可体系） 授权认可的实验室才能签发此类报告和DOC宣告) Sincerely, Client’s signature Client’s name / title: Albert Fu/ President Tel: 408 827 8106 Email: [email protected]

External Photo WIFI Antenna

Internal Photo

Shenzhen GTI Technology Co., Ltd. 1F, 2 Block, Jiaquan Building, Guanlan High-tech Park Baoan District, Shenzhen, Guangdong, China. Tel: +86-755-27559792 Fax: +86-755-86116468 Report No.: GTI20150270F-2 Page 1 of 57 TEST REPORT Product Name ........................... : 150Mbps Wireless N USB Adapter With High Gain Antenna Trademark ................................. : Panda Wireless Model/Type reference ............... : PAU08 Listed Model(s) ......................... : / FCC ID ....................................... : 2ADUTLGPAU08 Test Standards .......................... : ANSI C95.1–1999 47CFR §2.1093 IEEE 1528-2003 Applicant ................................... : Panda Wireless, Inc Address of applicant ................ : 15559 Union Ave, Suite 300, Los Gatos, CA 95032 Date of Receipt ......................... : Jun. 17, 2015 Date of Test Date ...................... : Sep. 17, 2015 Data of issue. ............................ : Sep. 19, 2015 Test result Pass * * In the configuration tested, the EUT complied with the standards specified above Page 2 of 57 Report No.: GTI20150270F-2 Shenzhen General Testing & Inspection Technology Co., Ltd. 1F, 2 Block, Jiaquan Building, Guanlan High-tech Park Baoan District, Shenzhen, Guangdong, China Tel.: (86)755-27588991 Fax: (86)755-86116468 Http://www.sz-ctc.com.cn GENERAL DESCRIPTION OF EUT Equipment: 150Mbps Wireless N USB Adapter With High Gain Antenna Model Name: PAU08 Manufacturer: Panda Wireless, Inc Manufacturer Address: 15559 Union Ave, Suite 300, Los Gatos, CA 95032 Power Rating: DC 5V via PC USB Compiled By: (Thomas Morgan) Reviewed By: (Tony Wang) Approved By: (Walter Chen) This test report consists of 57 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by GTI. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of compiler, reviewer and approver. Any objections must be raised to GTI within 15 days since the date when the report is received. It will not be taken into consideration beyond this limit. Page 3 of 57 Report No.: GTI20150270F-2 Shenzhen General Testing & Inspection Technology Co., Ltd. 1F, 2 Block, Jiaquan Building, Guanlan High-tech Park Baoan District, Shenzhen, Guangdong, China Tel.: (86)755-27588991 Fax: (86)755-86116468 Http://www.sz-ctc.com.cn Table of Contents Page 1. SUMMARY .......................................................................................................................................................................... 4 1.1 TEST STANDARDS ........................................................................................................................................................... 4 1.2 SUMMARY OF MAXIMUM SAR VALUE ............................................................................................................................ 4 1.3 TEST FACILITY ................................................................................................................................................................ 5 1.3.1 Address of the test laboratory ............................................................................................................................. 5 1.3.2 Laboratory accreditation ...................................................................................................................................... 5 1.4 MEASUREMENT UNCERTAINTY (300MHZ-3GHZ) ......................................................................................................... 5 1.5 SYSTEM CHECK UNCERTAINTY ...................................................................................................................................... 6 2. GENERAL INFORMATION .............................................................................................................................................. 8 2.1 ENVIRONMENTAL CONDITIONS ....................................................................................................................................... 8 2.2 GENERAL DESCRIPTION OF EUT ................................................................................................................................... 8 2.3 DESCRIPTION OF TEST MODES ...................................................................................................................................... 9 2.4 MEASUREMENT INSTRUMENTS LIST .............................................................................................................................. 9 3. SAR MEASUREMENTS SYSTEM CONFIGURATION ............................................................................................. 10 3.1 SAR MEASUREMENT SET-UP ............................................................................................................................... 10 3.2 DASY5 E-FIELD PROBE SYSTEM ......................................................................................................................... 11 3.3 PHANTOMS ............................................................................................................................................................... 12 3.4 DEVICE HOLDER ...................................................................................................................................................... 12 3.5 SCANNING PROCEDURE ....................................................................................................................................... 12 3.6 DATA STORAGE AND EVALUATION ..................................................................................................................... 15 4. TISSUE SIMULATING LIQUID ....................................................................................................................................…

Text truncated - open the document above for the full version.

      1F,2 Block, Jiaquan Building, Guanlan High-tech Park Baoan District, Shenzhen, Guangdong, China. Tel: +86-755-27559792 Fax: +86-755-86116468 Report No.: GTI20150270F-1 Page 1 of 56        ...........................  150Mbp s Wireless N USB Adapter With High Gain Antenna   .................................  Panda Wireless !  " #$  ...............  PAU08 %&!  '&( .........................  -- ) * ........................................  2ADUTLGPAU08 && ..........................  ) + ,-./  #% 0 %%1&23-42-5 !6-.334-.57,!6,/-,4,5,3!6 8## %  ...................................  Panda Wireless, Inc 8&& $## %  ................  15559 Union Ave, Suite 300, Los Gatos, CA 95032 * $ %# .........................  Jun.17 , 2015 * $ &* .......................  Jun. 20, 2015 - Jul. 09, 2015 * $%&& ............................  . 0, 2015 && &&9 In the configuration tested, the EUT complied with the standards specified above Page 2 of 56 Report No.: GTI20150270F-2 Shenzhen General Testing & Inspection Technology Co., Ltd. 1F, 2 Block, Jiaquan Building, Guanlan High-tech Park Baoan District, Shenzhen, Guangdong, China Tel.: (86)755-27588991 Fax: (86)755-86116468 Http://www.sz-ctc.com.cn 8*  ):  Equipment: 150Mbps Wireless N USB Adapter With High Gain Antenna Model Name: PAU08 Manufacturer: ġ Panda Wireless, Inc Manufacturer Address: ġ 15559 Union Ave, Suite 300,Los Gatos, CA 95032 Power Rating: DC 5V via PC USB Compiled By: (Sevin Li) Reviewed By: (Tony Wang) Approved By: (Walter Chen) This test report consists of 56 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by GTI. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of compiler, reviewer and approver. Any objections must be raised to GTI within 15 days since the date when the report is received. It will not be taken into consideration beyond this limit. Page 3 of 56 Report No.: GTI20150270F-2 Shenzhen General Testing & Inspection Technology Co., Ltd. 1F, 2 Block, Jiaquan Building, Guanlan High-tech Park Baoan District, Shenzhen, Guangdong, China Tel.: (86)755-27588991 Fax: (86)755-86116468 Http://www.sz-ctc.com.cn  1  $ &  1.SUMMARY............................................................................................................................................................4 1.1. TESTSTANDARDS..........................................................................................................................................................4 1.2. TESTDESCRIPTION........................................................................................................................................................4 1.3. TESTFACILITY..............................................................................................................................................................5 1.4. MEASUREMENTUNCERTAINTY........................................................................................................................................5 2. GENERALINFORMATION.......................................................................................................................................6 2.1. ENVIRONMENTALCONDITIONS........................................................................................................................................6 2.2. GENERALDESCRIPTIONOFEUT......................................................................................................................................6 2.3. DESCRIPTIONOFTESTCONFIGURATION............................................................................................................................7 2.4. MEASUREMENTINSTRUMENTSLIST.................................................................................................................................8 3. TESTCONDITIONSANDRESULTS...........................................................................................................................9 3.1. CONDUCTEDEMISSION(ACMAIN).................................................................................................................................9 3.2. RADIATEDEMISSION...................................................................................................................................................12 3.3. MAXIMUMCONDUCTEDOUTPUTPOWER.......................................................................................................................19 3.4. POWERSPECTRALDENSITY..........................................................................................................................................23 3.5. 6DBBANDWIDTH.......................................................................................................................................................27 3.6. BANDEDGECOMPLIANCEOFRFEMISSION.....................................................................................................................30 3.7. SPURIOUSRFCONDUCTEDEMISSION.............................................................................................................................36 3.8. ANTENNAREQUIREMENT.............................................................................................................................................49 4. EUTTESTPHOTO...........................................................................................................................…

Text truncated - open the document above for the full version.

Radiated Emission (30MHz-1GHz) Radiated Emission (1GHz-25GHz) Conducted Emission