2ADWT-ICSS03power line sensor transceiver

Type Automation & Sensors Intelligent Circuit Sensor (ICS®) TFDIR 72.5kV – 550kV INSTRUCTION INSTALLATION& MANUAL Page 2 The Quality Name in High Voltage Switching Preliminary Page 3 The Quality Name in High Voltage Switching Preliminary LIMITED WARRANTY Southern States, LLC (“SSLLC”) warrants only to the Warranty Holder (hereinafter defined as the “End User” or the “Immediate Purchaser”, as applicable, pursuant to the terms and conditions of this Limited Warranty as set forth below), that the Product identified below will, upon shipment, be free of defects in workmanship and material for the applicable Warranty Period. The “Warranty Period” is that period of time during which this Limited Warranty is effective, and such period begins on the invoice date issued by SSLLC for the Product, and continues until the earlier to occur of (1) the expiration of the Warranty Duration period, or (2) the Number of Operations, both as specified in the table below. If the Product is both purchased and installed within the United States or Canada, this Limited Warranty is granted to each end user of the Product who acquired the Product for its own use during the Warranty Period (“End User”). In all other situations, this Limited Warranty is granted only to the first purchaser of the Product (“Immediate Purchaser”) from SSLLC. No primary or remote purchaser or owner of the Product who is not a Warranty Holder may claim any benefit under this Limited Warranty, or any remedial promise included in this Limited Warranty. SSLLC shall, upon prompt written notice from the Warranty Holder, correct a nonconforming Product by repair or replacement at the sole discretion of SSLLC of the nonconforming Product or any part or component of a nonconforming Product necessary in SSLLC’s discretion to make such Product conforming. Any transportation charges, labor for removing, reinstalling the Product or part, and/or costs related to providing access to the Product shall be the responsibility of the Warranty Holder. Correction in this manner will constitute the Warranty Holder’s exclusive remedy and fulfillment of all SSLLC’s liabilities and responsibilities hereunder. SSLLC’s duty to perform under this limited warranty may be delayed, at SSLLC’s sole option, until SSLLC has been paid in full for all products purchased by the Warranty Holder. No such delay will extend the Warranty Period. If SSLLC does not make such repair or replacement, SSLLC’s liability for damages on account of any claimed nonconformity will in no event exceed the purchase price of the Product in question. This Limited Warranty does not apply to any Product that has been disassembled, repaired, or altered by anyone other than SSLLC. This Limited Warranty will not apply to any Product that has been subjected to improper or abnormal use of the Product. SSLLC has no responsibility to repair or replace any Product or component thereof manufactured by another party, but SSLLC will assign, to the extent assignable, to the Warranty Holder any manufacturers’ warranty that applies to products and components not manufactured by SSLLC. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES. THERE ARE NO OTHER EXPRESS, IMPLIED, OR STATUTORY WARRANTIES. ALL IMPLIED WARRANTIES WHICH MAY ARISE BY IMPLICATION OF LAW, OR APPLICATION OF COURSE OF DEALING OR USAGE OF TRADE, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT OR OTHERWISE ARE EXPRESSLY EXCLUDED. SSLLC SHALL NOT BE LIABLE OR RESPONSIBLE FOR ANY CONSEQUENTIAL, INCIDENTAL, INDIRECT, EXEMPLARY, SPECIAL, OR PUNITIVE DAMAGES, EVEN IF SSLLC HAS BEEN ADVISED OF THE POSSIBILITY OF SAME. THE WARRANTY HOLDER IS SOLELY RESPONSIBLE FOR THE SUITABILITY OF THE PRODUCT FOR ANY PARTICULAR APPLICATION. Product Purchased Region Product Installed Region Warranty Holder Warranty Duration U.S and CanadaU.S and CanadaEnd User2 years from shipment date All Other Conditions Immediate Purchaser Earlier of 1 year from installation or 18 months from shipment Page 4 The Quality Name in High Voltage Switching Preliminary ICS® TFDIR Installation & Instruction Manual Page 5 The Quality Name in High Voltage Switching Preliminary Table of Contents 1 Summary & Introduction ................................................................................................................. 6 1.1 Summary.................................................................................................................................. 6 1.2 Important................................................................................................................................. 6 1.3 Introduction ............................................................................................................................. 7 1.4 Ratings ..................................................................................................................................... 8 2 Product Description ......................................................................................................................... 9 2.1 Standard ICS TFDIR ............................................................................................................ 9 2.2 Receiving & Unpacking ........................................................................................................... 11 2.3 Storage .................................................................................................................................. 11 3 Installation & Configuration Procedures......................................................................................... 11 3.1 Assembly................................................................................................................................ 11 3.2 Installation ............................................................................................................................. 13 3.2.1 Mounting ..............…

Text truncated - open the document above for the full version.

User Manual Information for Certified Device FCC Statements This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/ TV technician for help. RF Exposure: This equipment complies with FCC RF Exposure requirements and should be installed and operated with a minimum distance of 20cm between the radiator and any part of the human body. Antenna Info: This equipment uses the following Antennas and may not be used with other antenna types or with antennas of higher gain: Mfg.: Molex _____ Type: Flexible patch ____ Gain: 2.27 dBi @ 2.4 GHz_ Note: Antenna info above not required for permanently attached antennas such as chip antenna or trace antenna. ISED (Canada) Statements in English and French: This device contains license-exempt transmitters/receivers that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause the undesired operation thereof. This equipment complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment and meets the RSS-102 radio frequency (RF) exposure guidelines. This equipment should be installed and operated keeping the radiator at least 20 cm or more away from person’s body. Cet appareil est conforme aux normes RSS exemptes de licence d'Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interférences, et (2) cet appareil doit accepter toute interférence, y compris les interférences pouvant entraîner un fonctionnement indésirable. Cet équipement est conforme aux limites d'exposition aux radiations RSS-102 établies pour un environnement non contrôlé et répond aux directives d'exposition aux radiofréquences (RF) RSS- 102. Cet équipement doit être installé et utilisé en maintenant le radiateur à au moins 20 cm ou plus du corps de la personne.

Rev 1/26/2023 30 Georgia Avenue ● Hampton, GA 30226 Phone: 770-946-4562 ● Fax: 770-946-8106 E-mail: [email protected] Web: www. southernstatesllc.com Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 07-08-2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2ADWT-ICSS03 Southern States, LLC (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Tan Tran

30 Georgia Avenue ● Hampton, GA 30226 Phone: 770-946- 4562 ● Fax: 770-946- 8106 E-mail: [email protected] Web: www. southernstatesllc.com Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 05-16-2024 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code: _____2ADWT_____________ Southern State s, LLC (“the applicant”) certifies that, as of the date o f the filing o f the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information: FRN : __0021707666______________ Name: Southern States Address: 30 Georgia Ave., Hampton GA Contact Pe rson: Tan Tran Tel.: __770-946- 4562___________ _ Email : [email protected]__ Sincerely, Southern States, LLC Rev 1/26/2023

30 Georgia Avenue ● Hampton, GA 30226 Phone: 770-946-4562 ● Fax: 770-946-8106 E-mail: [email protected] Web: www. southernstatesllc.com Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-01-2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2ADWT-ICSS03 Southern States, LLC (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Tan Tran

3505 Francis Circle Alpharetta, GA 30004 PH: 770-740-0717 Fax: 770-740-1508 www.ustech-lab.com SDoC Attestation Letter Date: July 18, 2024 Subject: SDoC Attestation Letter: FCC ID: 2ADWT-ICSS03 The following equipment meets FCC Part 15 Subpart B SDoC Requirements for digital device: Responsible Party: Southern States, LLC 30 Georgia Avenue Hampton, GA 30226 Responsible Party Contact Person: Tan Tran Equipment: Southern States, LLC Model: ICS/TFDIR Sensor Sincerely, By: __________________________ ___George Yang__- Agent (Signature/Title) (Print name)

30 Georgia Avenue ● Hampton, GA 30226 Phone: 770-946-4562 ● Fax: 770-946-8106 E-mail: [email protected] Web: www. southernstatesllc.com AGENCY AGREEMENT Federal Communications Commission Date: 7435 Oakland Mills Road Columbia, MD 21045 Gentlemen: By signature below, we hereby appoint US Tech employees Alan Ghasiani and George Yang to act as our agents with regard to all FCC equipment authorizations. This appointment will remain in effect until otherwise notified. I further certify by signature below that no party (per 47 CFR 1.2002(b)) to the application is subject to a denial of Federal benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). This appointment includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Name: Tan Tran Signature: Title: Application Engineer II Date:

Request for Confidentiality Date: ___July 18, 2024____ Subject: Confidentiality Request for: _FCC ID: 2ADWT-ICSS03, IC: 12660A-ICSS03_ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual Southern States, LLC. has spent substantial effort in developing this product and it is one of the first of its kind in this industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Failure to protect the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: _______________________ ___George Yang__- Agent (Signature) (Print name)

US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern States, LLC Model: ICS/TFDIR Sensor Page 1 of 7 EXTERNAL PHOTOS Figure 1. Side 1 US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern States, LLC Model: ICS/TFDIR Sensor Page 2 of 7 Figure 2. Side 2 US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern States, LLC Model: ICS/TFDIR Sensor Page 3 of 7 Figure 3. Side 3 US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern States, LLC Model: ICS/TFDIR Sensor Page 4 of 7 Figure 4. Side 4 US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern States, LLC Model: ICS/TFDIR Sensor Page 5 of 7 Figure 5. Front Side US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern States, LLC Model: ICS/TFDIR Sensor Page 6 of 7 Figure 6. Back side US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern States, LLC Model: ICS/TFDIR Sensor Page 7 of 7 Figure 7. Front Side with potting material filled in. (Production Sample)

US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern States, LLC Model: ICS/TFDIR Sensor Page 1 of 2 Sample Label and Location This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern States, LLC Model: ICS/TFDIR Sensor Page 2 of 2 Label goes here. *Arrow points in UP direction

US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern States, LLC Model: ICS/TFDIR Sensor Page 1 of 13 INTERNAL PHOTOS Figure 1. Unpotted Sample, Internal View US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern States, LLC Model: ICS/TFDIR Sensor Page 2 of 13 Figure 2. PCB assembly unmounted US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern States, LLC Model: ICS/TFDIR Sensor Page 3 of 13 Figure 3. Zoomed Out view of PCB assembly unmounted US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern States, LLC Model: ICS/TFDIR Sensor Page 4 of 13 Figure 4. PCB assembly Close Up view US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern States, LLC Model: ICS/TFDIR Sensor Page 5 of 13 Figure 5. PCB board 1, Side 1 US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern States, LLC Model: ICS/TFDIR Sensor Page 6 of 13 Figure 6. PCB Board 1, Side 2 US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern States, LLC Model: ICS/TFDIR Sensor Page 7 of 13 Figure 7. PCB Board 2 (Sensor board), Solder side US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern States, LLC Model: ICS/TFDIR Sensor Page 8 of 13 Figure 8. PCB Board 2 (Sensor board), Component side US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern States, LLC Model: ICS/TFDIR Sensor Page 9 of 13 Figure 9. PCB Board 2 (Sensor board), Component side with Shielding Removed from Transmitter circuitry US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern States, LLC Model: ICS/TFDIR Sensor Page 10 of 13 Figure 10. Close Up of Transmitter circuitry 1 US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern States, LLC Model: ICS/TFDIR Sensor Page 11 of 13 Figure 11. Close Up Transmitter Circuitry 2 US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern States, LLC Model: ICS/TFDIR Sensor Page 12 of 13 Figure 12. Inside the case US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern States, LLC Model: ICS/TFDIR Sensor Page 13 of 13 Figure 13. Inside View

- - - - - - - - Documents & Resources Product Environment Compliance Compliance Multiple Part Product Compliance Statements Eu RoHS REACH SVHC Low-Halogen Multiple Part Industry Compliance Documents IPC 1752A Class C IPC 1752A Class D Molex Product Compliance Declaration IEC-62474 chemSHERPA (xml) EU RoHS Certificate of Compliance Part Details Part Number : 479500011 Product Description : 2.4GHz / 5GHz Wi-Fi Stand Alone Antenna, 16.00mm Width, 100.00mm Cable Length, Compatible with U.FL / I-PEX MHF Connectors Series Number : 47950 Status : New Business Not Supported Product Category : Antennas GADSL/IMDSNot Relevant China RoHS EU ELVNot Relevant Low-Halogen StatusLow-Halogen per IEC 61249-2-21 REACH SVHCContains 2-Methyl-1-(4- methylthiophenyl)-2- morpholinopropan-1-one per per D(2022)9120-DC (17 Jan 2023) EU RoHSCompliant per EU 2015/863 General Electrical Physical StatusNew Business Not Supported CategoryAntennas Series47950 Description2.4GHz / 5GHz Wi-Fi Stand Alone Antenna, 16.00mm Width, 100.00mm Cable Length, Compatible with U.FL / I-PEX MHF Connectors Component TypeFlexible Antenna with Cable FunctionSignal Product FamilyInternet of Things (IoT) Antennas: Wi-Fi, Bluetooth, Zigbee Product Name2.4GHz SMD Stand Alone ProtocolBLE, BT, Thread, Wi-Fi, Wireless Hart, Zigbee TypeWi-Fi Antenna UPC884982642645 Band#1 F_End (MHz)2483.5 Band#1 F_Start (MHz)2400 Band#2 F_End (MHz)5900 Band#2 F_Start (MHz)4800 Electrical ConnectivityCable Peak Gain (dBi)2.27 @ 2.4 GHz, 4.9 @ 5 GHz Return Loss - S11 (dB)< -10, < -9 Total Efficiency>85% @ 2.4 GHz, >85% @ 5 GHz Cable Length100.00mm Length35.90mm Mounting StyleAdhesive Net Weight0.680/g Packaging TypeTray PolarizationLinear Radiation PatternOmnidirectional This document was generated on Sep 26, 2023 Thickness0.10mm Width15.90mm

US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern Sates, LLC Model: ICS/TFDIR Sensor Page 31 of 59 Figure 17. Band Edge Compliance – Sensor Low Channel Delta – Peak Lower band edge must be 20 dB below the fundamental. This requirement is met. Measured Result -30.81 dB Band Edge Limit -20.00 dB Band Edge Margin 10.81 dB US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern Sates, LLC Model: ICS/TFDIR Sensor Page 32 of 59 Figure 18. Sensor Low Channel Restricted Band – Peak Frequency (MHz) Test Data (dBuV) Duty- Cycle Correction AF+CA- AMP+DC (dB/m) Results (dBuV/m) Limits (dBuV/m) Distance / Polarization Margin (dB) Detector PK/QP/AVG 2390 48.23 0.00 -5.55 42.68 74.0 3.0m./Vert 31.32 PK 2390 48.27 -1.41 -5.55 41.27 54.0 3.0m./Vert 12.73 PK Duty Cycle is 85% : 20*Log(0.85) = -1.41 US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern Sates, LLC Model: ICS/TFDIR Sensor Page 33 of 59 Figure 19. Band Edge Compliance – Sensor High Channel Delta – Peak Higher band edge must be 20 dB below the fundamental. This requirement is met. Measured Result -30.42 dB Band Edge Limit -20.00 dB Band Edge Margin 10.42 dB US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern Sates, LLC Model: ICS/TFDIR Sensor Page 34 of 59 Figure 20. Sensor High Channel Restricted Band – Peak Frequency (MHz) Test Data (dBuV) Duty- Cycle Correction AF+CA- AMP+DC (dB/m) Results (dBuV/m) Limits (dBuV/m) Distance / Polarization Margin (dB) Detector PK/QP/AVG 2483.5 59.91 0.00 -5.55 54.34 74.0 3.0m./HORZ 19.66 PK 2483.5 59.91 -1.41 -5.55 52.93 54.0 3.0m./HORZ 1.07 PK Duty Cycle is 85% : 20*Log(0.85) = -1.41 US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern Sates, LLC Model: ICS/TFDIR Sensor Page 35 of 59 2.12 Six (6) dB Bandwidth (CFR 15.247(a)(2), RSS-247, 5.2(a)) The EUT antenna port was connected to a spectrum analyzer having a 50  input impedance. Measurements were performed per ANSI C63.10-2013, clause 11.8. The RBW was set to 100 kHz and the VBW ≥ RBW. The results of this test are given in the table and figures below. Figure 21. Bench Test Setup Table 7. Six (6) dB Bandwidth Frequency (MHz) 6 dB Bandwidth (MHz) Minimum FCC Bandwidth (MHz) 2403.5 1.550 0.5 2443.5 1.560 0.5 2480 1.568 0.5 Test Date: June 6, 2024 Tested by Signature: ________________ Name: Ian Charboneau US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern Sates, LLC Model: ICS/TFDIR Sensor Page 36 of 59 Figure 22. 6 dB Bandwidth Sensor Low Channel US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern Sates, LLC Model: ICS/TFDIR Sensor Page 37 of 59 Figure 23. 6 dB Bandwidth Sensor Mid Channel US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern Sates, LLC Model: ICS/TFDIR Sensor Page 38 of 59 Figure 24. 6 dB Bandwidth Sensor High Channel US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern Sates, LLC Model: ICS/TFDIR Sensor Page 39 of 59 2.13 Occupied Bandwidth, (99% Bandwidth) (RSS-GEN (6.6)) The EUT antenna port was connected to a spectrum analyzer having a 50Ω input impedance. Measurements were performed similar to the method of FCC, KDB Publication No. 558074 v03r05 for a bandwidth of 20 dB. The RBW was set to approximately 1/100 of the manufacturers claimed RBW and with the VBW ≥ RBW. The results of this test are given in Table 17 and presented in the figures in section 2.12 above. Figure 25. Bench Test Setup Table 8. 99% Occupied Bandwidth Frequency (MHz) 99% Occupied Bandwidth (MHz) 2403.5 2.279 2443.5 2.299 2480.0 2.332 Test Date: June 6, 2024 Tested by Signature: ________________ Name: Ian Charboneau US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern Sates, LLC Model: ICS/TFDIR Sensor Page 40 of 59 Figure 26. 99% Occupied Bandwidth Sensor Low Channel US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern Sates, LLC Model: ICS/TFDIR Sensor Page 41 of 59 Figure 27. 99% Occupied Bandwidth Sensor Mid Channel US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern Sates, LLC Model: ICS/TFDIR Sensor Page 42 of 59 Figure 28. 99% Occupied Bandwidth Sensor High Channel US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern Sates, LLC Model: ICS/TFDIR Sensor Page 43 of 59 2.14 Maximum Peak Conducted Output Power (CFR 15.247 (b) (3)) The transmitter was programmed to operate at a maximum output power across the bandwidth. For this test the output power of the radio was set to the maximum data rate, with 11Mbps for mode b, 54 Mbps for made g, and MSC-7 for mode n, in order to meet all test requirements. Peak power within the band 2400 MHz to 2483.5 MHz was measured per ANSI C63.10-2013 as an Antenna Conducted test with a spec…

Text truncated - open the document above for the full version.

Page 1 of 59 Application For Part 2, Subpart J, Paragraph 2.907 Equipment Authorization of Certification for an Intentional Radiator per Part 15, Subpart C, paragraphs 15.207, 15.209 and 15.247 And Innovation, Science, and Economic Development Canada Certification Per IC RSS-Gen General Requirements for Radio Apparatus And RSS-247Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSS) and License-Exempt Local Area Network (LE-LAN) Devices For the Southern States, LLC Model Number: ICS/TFDIR Sensor FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 UST Project: 24-0101 Issue Date: July 18, 2024 Total Pages: 59 3505 Francis Circle Alpharetta, GA 30004 PH: 770-740-0717 Fax: 770-740-1508 www.ustech-lab.com Page 2 of 59 I certify that I am authorized to sign for the Test Agency and that the statements in this report and in the Exhibits attached hereto are true and correct to the best of my knowledge and belief: US TECH (Agent Responsible For Test): By: Alan Ghasiani Name: Title: Compliance Engineer – President Date: July 18, 2024 This report shall not be reproduced except in full. This report may be copied in part only with the prior written approval of US Tech. The results contained in this report are subject to the adequacy and representative character of the sample provided. This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any agency of the US Government. 3505 Francis Circle Alpharetta, GA 30004 PH: 770-740-0717 Fax: 770-740-1508 www.ustech-lab.com US Tech Test Report: FCC Part 15/IC RSS Certification FCC ID: 2ADWT-ICSS03 IC: 12660A-ICSS03 Test Report Number: 24-0101 Issue Date: July 18, 2024 Customer: Southern Sates, LLC Model: ICS/TFDIR Sensor P…

Text truncated - open the document above for the full version.