2ADYC-SM-314G2.4GHz Wireless Mouse

Model:SM314AG The RF2.4GHz optical mouse use two AAA alkaline batteries. 1:when you want use the mouse ,you can take out the receiver to computer by the list step; 2:when you need stop the work or to travel, you can store the receiver on the mouse for the moving by the list step. Nano receiver * This mouse is equipped with Traveling-Power-Save function. When you are traveling with this mouse, the LED of the mouse will be switched off automatically for the purpose of power-save, but the pre-condition is that the receiver is disconnected with your notebook or PC. * when your mouse no any clik or scroll or moving, the mouse will come to sleep state for the economize after about 8 seconds, for the wake up, you can scroll the wheel or click any button for this DPI Switch Your optical 3D button mouse is provide 800&1200&1600 dpi switch. When you find this set doesn't work, you can make the mouse in working condition by restoring the mouse back to factory default settings. 1: check the battery volume is normal; if the battery is used out, please replace new batteries. if the battery volume is normal, please take out the battery and insert again the battery into the mouse. 2: insert the nano receiver onto the USB port of PC or notebook, make sure that the mouse is close to the receiver for auto-matching. FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the follo wing two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipme nt does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

SCS-F18:ProjectandProductCertificationRepresentativeAuthorizationLetterPage1of2Rev5.0 775MontagueExpressway Milpitas,CA95035 Tel:408-526-1188 Fax:408-526-1088 Email:[email protected] ProjectandProduct CertificationRepresentative AuthorizationLetter ReasonforAmendment(current/obsolete) RevisionHistory ApprovedDate FromTo InitialRelease(obsolete)1.01.0Nov-14-2006 Revisedwording(obsolete)1.02.0Sept–25-2007 Updatedcompanytemplate(obsolete)2.03.0Jan-31-2012 Updatedletterinformation(obsolete)3.04.0May-23-2014 AddedFCCIDfield(current)4.05.0Sept162014 SCS-F18:ProjectandProductCertificationRepresentativeAuthorizationLetterPage2of2Rev5.0 (UNIQCORPORATION) (2015-07-29) To:SIEMIC,INC. 775MontagueExpressway, Milpitas,CA95035 USA DearSir/Madam, Re:ProductCertificationRepresentativeAuthorizationLetter We,_____UNIQCORPORATION_____herebyauthorizeSIEMIC,Inc.toactasaCertification Bodyforcertifyingforthefollowingproject(s): Productdescription:2.4GHzWirelessMouse Modelname:SM-314G,SM-314GB,SM-314GW,M314G,SM-314AG,SM-313AG,SM-325AG FCCID:2ADYC-SM-314G Sincerely, Client’ssignature AkiyoshiSato/Productmanager CompanyName:UNIQCORPORATION Address:2-AKashiwaGodoOfficeWakabachoKashiwa277-0024ChibaJapan Email:[email protected]

SCS-F19:ConfidentialityRequestLetterPage 1 of 2 Rev4.0 775MontagueExpressway Milpitas,CA95035 Tel:408-526-1188 Fax:408-526-1088 Email:[email protected] Confidentiality RequestLetter ReasonforAmendment(current/obsolete) RevisionHistory ApprovedDate FromTo InitialRelease(obsolete)1.01.0Nov-14-2006 AddingCFR2.459(obsolete)1.02.0August–11-2008 Updatedcompanytemplate&Addedtextbox (obsolete) 2.03.0Jan-31-2012 AddedICconfidentialityletterform(current)3.04.0March-26-2015 SCS-F19:ConfidentialityRequestLetterPage 2 of 2 Rev4.0 (UNIQCORPORATION) (2015-07-29) To: FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD Subject:PermanentConfidentialityRequestforFCCID:2ADYC-SM-314G Weherebyrequestconfidentialtreatmentofinformationaccompanyingthisapplicationasoutlinedbelow: -BlockDiagram -Schematics -OperationalDescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedtothepublic.The publicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovideunjustifiedbenefitstoits competitors. TheapplicantunderstandsthatpursuanttoSection0.457&0.459oftheRules,disclosureofthisapplicationand allaccompanyingdocumentationwillnotbemadebeforethedateoftheGrantforthisapplication. Sincerely, Client’ssignature AkiyoshiSato/Productmanager CompanyName:UNIQCORPORATION Address:2-AKashiwaGodoOfficeWakabachoKashiwa277-0024ChibaJapan Email:[email protected]

UNIQCORPORATION DeclarationonModelDifferences We, UNIQCORPORATION 2-AKashiwaGodoOfficeWakabachoKashiwa277-0024ChibaJapan Declarethatthefollowingproduct(s): ProductName:2.4GHzWirelessMouse ModelNumber:SM-314G,SM-314GB,SM-314GW,M314G,SM-314AG,SM-313AG,SM- 325AG FCCID:2ADYC-SM-314G Utilizetheidenticalcircuitdesign,PCBlayout,shieldingandinterfacewith(SM-314G),only themodelnumberandcolouraredifference.Thereforethisapplicationcanberegardedas identicalinperformancetothesubmittedtestsample. Themanufacturerwouldtakealltheresponsibilitiesfortheaboveproduct(s). Forandonbehalfof ChibaJapan AuthorizedpersonLocation Name:AkiyoshiSato Position:Productmanager Dateofissue:2015-07-29 *IherebydeclarethatIamentitledtosignonbehalfoftheapplicantandthattheinformationsuppliediscorrectandcomplete.

Figure1 The EUT-Top View Figure2 The EUT-BottomView Figure3 The EUT-FrontView Figure4 The EUT-BackView Figure5 The EUT-RightView Figure6 The EUT-Left View

LabelLocationOnEUT

ProductName:2.4GHzWirelessMouse ModelNo.:SM-314G FCCID:2ADYC-SM-314G

Figure7 TheEUT-InsideView Figure8 PCBoftheEUT-FrontView Figure9 PCBoftheEUT-BackView Figure10 PCBoftheEUT-FrontView Figure11 PCBoftheEUT-BackView Figure12 PCBoftheEUT-ModuleView Antenna

ShenzhenAnbotekComplianceLaboratoryLimited FCCID: 2ADYC-SM-314GPage1 of 33 ReportNo. : R011507482I ShenzhenAnbotekComplianceLaboratoryLimited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com FCCTESTREPORT for UNIQCORPORATION 2.4GHzWirelessMouse ModelNo.: SM-314G,SM-314GB,SM-314GW, M314G,SM-314AG,SM-313AG,SM-325AG ReportNumber:R011507482I DateofTest:Jul.17~Aug.04,2015 DateofReport:Aug.05,2015 Preparedfor:UNIQCORPORATION Address:2-A KashiwaGodoOfficeWakabachoKashiwa277-0024Chiba Japan PreparedBy:ShenzhenAnbotekComplianceLaboratoryLimited Address:1/F.,Building1, SECIndustrialPark,No.0409QianhaiRoad, NanshanDistrict,Shenzhen,Guangdong,China Tel:(86)755-26066544 Fax:(86)755-26014772 ShenzhenAnbotekComplianceLaboratoryLimited FCCID: 2ADYC-SM-314GPage2 of 33 ReportNo. : R011507482I ShenzhenAnbotekComplianceLaboratoryLimited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com TABLEOF CONTENTS Description Page Test Report 1. GENERALINFORMATION......................................................................................................4 1.1. Descriptionof Device(EUT)................................................................................................................4 1.2. AuxiliaryEquipmentUsedduringTest ................................................................................................5 1.3. Descriptionof Test Facility..................................................................................................................5 1.4. MeasurementUncertainty.....................................................................................................................5 2. TESTPROCEDURE....................................................................................................................6 3. RADIATIONINTERFERENCE................................................................................................7 3.1 . Requirements(15.249,15.209):............................................................................................................7 3.2. Test Procedure......................................................................................................................................7 3.3. Test Results...........................................................................................................................................7 4. BANDEDGE................................................................................................................................13 4.1 . Requirements(15.249):.......................................................................................................................13 4.2. Test Procedure....................................................................................................................................13 4.3. Test Configuration:.............................................................................................................................13 4.4. Test Results.........................................................................................................................................14 5. OCCUPIEDBANDWIDTH......................................................................................................23 5.1 . Requirements:....................................................................................................................................23 5.2. Test SET-UP.......................................................................................................................................23 5.3 Test Equipment....................................................................................................................................23 5.4. Test Results.........................................................................................................................................23 6. ANTENNAAPPLICATION......................................................................................................26 6.1. Antennarequirement...........................................................................................................................26 6.2. Result..................................................................................................................................................26 7. PHOTOGRAPH.........................................................................................................................27 7.1. Photoof RadiationEmissionTest .......................................................................................................27 ShenzhenAnbotekComplianceLaboratoryLimited FCCID: 2ADYC-SM-314GPage3 of 33 ReportNo. : R011507482I ShenzhenAnbotekComplianceLaboratoryLimited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com TESTREPORT Applicant: UNIQCORPORATION Manufacturer: UNIQCORPORATION EUT: 2.4GHzWirelessMouse ModelNo.: SM-314G,SM-314GB,SM-314GW,M314G,SM-314AG, SM-313AG,SM-325AG SerialNo.: N.A . TradeMark: N.A. Rating: DC 3V, 8mA MeasurementProcedureUsed: FCCPart15SubpartC, Paragraph15.207,15.249& 15.209 Thedevicedescribedaboveis testedby ShenzhenAnbotekComplianceLaboratory Limitedto determinethe maximumemissionlevelsemanatingfromthe deviceand the severelevelsof the devicecan endureand its performancecriterion.The measurement resultsare containedin this test reportand ShenzhenAnbotekComplianceLaboratory Limitedis assumedfull of responsibilityfor the accuracyand completenessof these measurements.Also,thisreportshowsthatthe EUT(EquipmentUnderTest)is technicallycompliantwiththe FCCPart 15 SubpartC requirements. Thisreportappliesto abovetestedsampleonlyand shallnot be reproducedin part without writtenapprovalof ShenzhenAnbotekComplianceLaboratoryLimited. DateofTest:Jul.17~Aug.04,2015 Preparedby: (TestedEngineer/KeboZhang) Reviewer: (ProjectManager/AmyDing) Approved&AuthorizedSigner: (Manager/TomChen) ShenzhenAnbotekComplianceLaboratoryLimited FCCID: 2ADYC-SM-314GPage4 of 33 ReportNo. : R011507482I ShenzhenAnbotekComplianceLaboratoryLimited T…

Text truncated - open the document above for the full version.

1.PhotoofRadiationEmissionTest