2ADYY-KE7Mobile Phone

E E x x p p l l o o s s i i o o n n d d i i a a g g r r a a m m s s p p e e c c i i f f i i c c a a t t i i o o n n 1 FL(CTP+LCM) 6.78HD+h X682 Black TXD V1.0 2 F hsg KE7 Black PC+20%GF 3 LT sensorlight guide CE7 4 F flash lens CE7 5 Distance light guide KE7 6 F CAM frame KE7 7 MAIN PCBA KE7 8 UP frame KE7 Black 9 REC KE7 10 R CAM 2M MACRO KE7 11 R CAM 16M KE7 12 R CAM 2M TELE KE7 13 R CAM 8W KE7 14 F CAM 8M KE7 15 Rec Deco X682 16 R CAM 8W RUBBER KE7 17 R CAM 2M MACRO RUBBER KE7 18 R CAM 2M TELE RUBBER KE7 19 RCAM LENS KE7 20 SCREW L2.5 21 BATTERY COVER KE7 22 SCREW L3.5 23 RCAM 8W FRAME KE7 24 REC FPC KE7 25 Card Holder KE7 26 SIDE KEY KE7 27 R flash lens KE7 28 DOWN frame KE7 29 USB RUBBER KE7 30 EARJACK RUBBER KE7 31 FINGER PRINT KE7 32 SIDE KEY FPC KE7 33 RF LINE KE7 34 FINGER PRINT STEEL KE7 35 SUB PCB KE7 36 SPK FRAME KE7 37 BATTERY KE7 Know your phone 1. Front camera 2. Volume key 3. Power key ① SIM/SD card installation 1. Power off mobile. 2. Refer to the following picture for SIM / SD card installation. Charging the phone You can charge your device using a charger or by connecting it to the computer using a USB cable (comes with the phone). 1. Please remind the front and back of the plug. 2. Use only TECNO charger and cables. Other chargers or cables may damage the device. This will invalidate your phone warranty. FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. SAR Information Statement Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is1.312W/Kgand when worn on the body, as described in this user guide, is1.115W/Kg(Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). The maximum scaled SAR in hotspot mode is 1.115W/Kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RFexposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on FCC ID: 2ADYY-KE7 Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained betw…

Text truncated - open the document above for the full version.

TECNO MOBILE LIMITED DATE :2020-07-07 Equipment Autorisation Division Federal Communications Commission 7345 Oakland Mills Road Columbia, MD 21046 FCC ID: 2ADYY-KE7 Product Name: Mobile Phone Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: Schematics Block diagram Operation description BOM and Tune up These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 2020-07-07 By: Yiting Luo Signature Printed Title: manager On behalf of : TECNO MOBILE LIMITED Telephone: +86 0755-61803856

TECNO MOBILE LIMITED Date: 2020-07-07 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, Dated this 2020-07-07 By: Yiting Luo Signature Printed Title: manager On behalf of : TECNO MOBILE LIMITED Telephone: +86 0755-61803856

TECNO MOBILE LIMITED DATE:2020-07-07 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act asAgent On our behalf, I appoint Shenzhen Zhongjian Nanfang Testing Co.,Ltd.; 1st Floor, Block No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China；Bruce.Zhang, to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with TECNO MOBILE LIMITED/ ROOM 604 6/F SOUTH TOWER WORLD FINANCE CTR HARBOUR CITY 17 CANTON ROAD TST KL Hong Kong Dated this 2020-07-07 By: Yiting Luo Signature Printed Title: manager On behalf of : TECNO MOBILE LIMITED Telephone: +86 0755-61803856

TECNO MOBILE LIMITED DATE :2020-07-07 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2ADYY-KE7 Product Name: Mobile Phone Request for Short-Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission rules, and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we hereby request short-term confidentiality for the following items prior to marketing the device.: Test Setup Photos External Photos Internal Photos User Manual The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. <Signature> Name Yiting Luo Title manager Company TECNO MOBILE LIMITED

Report No: CCISE200604601 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2006046 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 49 of 62 8 EUT Constructional Details Report No: CCISE200604601 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2006046 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 50 of 62 Report No: CCISE200604601 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2006046 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 51 of 62 Report No: CCISE200604601 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2006046 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 52 of 62 Report No: CCISE200604601 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2006046 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 53 of 62

36*30MM label location label location

Report No: CCISE200604601 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2006046 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 54 of 62 Report No: CCISE200604601 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2006046 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 55 of 62 Report No: CCISE200604601 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2006046 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 56 of 62 Report No: CCISE200604601 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2006046 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 57 of 62 Report No: CCISE200604601 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2006046 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 58 of 62 Report No: CCISE200604601 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2006046 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 59 of 62 Report No: CCISE200604601 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2006046 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 60 of 62 Report No: CCISE200604601 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2006046 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 61 of 62 Report No: CCISE200604601 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2006046 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 62 of 62 ------End of report------

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCISE200604701 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page FCC SAR REPORT Applicant: TECNO MOBILE LIMITED Address of Applicant: ROOM 604 6/F SOUTH TOWER WORLD FINANCE CTR HARBOUR CITY 17 CANTON ROAD TST KL Equipment Under Test (EUT) Product Name: Mobile Phone Model No.: KE7 Trade mark TECNO FCC ID: 2ADYY-KE7 Applicable standards: FCC 47 CFR Part 2.1093 Date of Test: 17 Jun., 2020 ~ 09 Jul., 2020 Test Result: Maximum Reported 1-g SAR (W/kg) Head: 1.312 Body: 1.115 Hotspot: 1.115 Report No: CCISE200604701 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2006047 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 2 of 230 2 Version Version No. Date Description 00 10 Jul., 2020 Original Tested by: Date: 10 Jul., 2020 Report Clerk Reviewed by: Date: 10 Jul., 2020 Project Engineer Report No: CCISE200604701 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2006047 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 3 of 230 3 Contents 1 COVER PAGE ....................................................................................................................................................... 1 2 VERSION ............................................................................................................................................................... 2 3 CONTENTS ........................................................................................................................................................... 3 4 SAR RESULTS SUMMARY ................................................................................................................................. 5 5 GENERAL INFORMATION .................................................................................................................................. 7 5.1 CLIENT INFORMATION ..................................................................................................................................................................... 7 5.2 GENERAL DESCRIPTION OF EUT ................................................................................................................................................... 7 5.3 MAXIMUM RF OUTPUT POWER ...................................................................................................................................................... 8 5.4 ENVIRONMENT OF TEST SITE ......................................................................................................................................................... 9 5.5 TEST LOCATION ............................................................................................................................................................................. 9 6 INTRODUCTION ................................................................................................................................................. 10 6.1 INTRODUCTION ............................................................................................................................................................................. 10 6.2 SAR DEFINITION .......................................................................................................................................................................... 10 7 RF EXPOSURE LIMITS ..................................................................................................................................... 11 7.1 UNCONTROLLED ENVIRONMENT ................................................................................................................................................... 11 7.2 CONTROLLED ENVIRONMENT ....................................................................................................................................................... 11 7.3 RF EXPOSURE LIMITS .................................................................................................................................................................. 11 8 SAR MEASUREMENT SYSTEM ....................................................................................................................... 12 8.1 E-FIELD PROBE............................................................................................................................................................................ 13 8.2 DATA ACQUISITION ELECTRONICS (DAE) .................................................................................................................................... 13 8.3 ROBOT ..........................................................................................…

Text truncated - open the document above for the full version.

Report No: CCISE200604701 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2006047 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 101 of 230 Test Laboratory: CCIS Date/Time: 06.27.2020 18:13:24 DUT: Mobile Phone; Type: KE7; Serial: 1# Communication System: UID 0, GSM (0); Frequency: 848.8 MHz; Duty Cycle: 1:8.30042 Medium parameters used (interpolated): f = 848.8 MHz; σ = 0.908 S/m; ε r = 42.305; ρ = 1000 kg/m 3 Phantom section: Left Section DASY5 Configuration:  Probe: EX3DV4 - SN3924; ConvF(9.67, 9.67, 9.67); Calibrated: 08.30.2019;  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1373; Calibrated: 08.09.2019  Phantom: SAM 5.0; Type: QD000P40CD; Serial: TP:1765  Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) GSM 850 Left Cheek/High Channel/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 19.21 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 1.00 W/kg SAR(1 g) = 0.442 W/kg; SAR(10 g) = 0.276 W/kg Maximum value of SAR (measured) = 0.735 W/kg GSM 850 Left Cheek/High Channel/Area Scan (51x71x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.05 W/kg 0 dB = 1.05 W/kg = 0.21 dBW/kg Report No: CCISE200604701 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2006047 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 102 of 230 Test Laboratory: CCIS Date/Time: 07.02.2020 17:24:32 DUT: Mobile Phone; Type: KE7; Serial: 1# Communication System: UID 0, GSM (0); Frequency: 1909.8 MHz; Duty Cycle: 1:8.30042 Medium parameters used: f = 1909.8 MHz; σ = 1.432 S/m; ε r = 40.596; ρ = 1000 kg/m 3 Phantom section: Left Section DASY5 Configuration:  Probe: EX3DV4 - SN3924; ConvF(8.17, 8.17, 8.17); Calibrated: 08.30.2019;  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1373; Calibrated: 08.09.2019  Phantom: SAM 5.0; Type: QD000P40CD; Serial: TP:1765  Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) GSM 1900 Left Tilted/High Channel/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 13.27 V/m; Power Drift = 0.15 dB Peak SAR (extrapolated) = 1.10 W/kg SAR(1 g) = 0.495 W/kg; SAR(10 g) = 0.220 W/kg Maximum value of SAR (measured) = 0.849 W/kg GSM 1900 Left Tilted/High Channel/Area Scan (51x71x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.551 W/kg 0 dB = 0.551 W/kg = -2.59 dBW/kg Report No: CCISE200604701 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2006047 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 103 of 230 Test Laboratory: CCIS Date/Time: 06.27.2020 19:09:37 DUT: Mobile Phone; Type: KE7; Serial: 1# Communication System: UID 0, UMTS-FDD(WCDMA) (0); Frequency: 846.6 MHz; Duty Cycle: 1:1 Medium parameters used (interpolated): f = 846.6 MHz; σ = 0.908 S/m; ε r = 42.305; ρ = 1000 kg/m 3 Phantom section: Left Section DASY5 Configuration:  Probe: EX3DV4 - SN3924; ConvF(9.67, 9.67, 9.67); Calibrated: 08.30.2019;  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1373; Calibrated: 08.09.2019  Phantom: SAM 5.0; Type: QD000P40CD; Serial: TP:1765  Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) WCDMA 850 Left Cheek/High Channel/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 20.65 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 1.22 W/kg SAR(1 g) = 0.515 W/kg; SAR(10 g) = 0.311 W/kg Maximum value of SAR (measured) = 0.893 W/kg WCDMA 850 Left Cheek/High Channel/Area Scan (51x71x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.23 W/kg 0 dB = 1.23 W/kg = 0.90 dBW/kg Report No: CCISE200604701 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2006047 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 104 of 230 Test Laboratory: CCIS Date/Time: 07.08.2020 11:20:16 DUT: Mobile Phone; Type: KE7; Serial: 1# Communication System: UID 0, UMTS-FDD(WCDMA) (0); Frequency: 1732.6 MHz; Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1732.6 MHz; σ = 1.376 S/m; ε r = 41.348; ρ = 1000 kg/m 3 Phantom section: Left Section DASY5 Configuration:  Probe: EX3DV4 - SN3924; ConvF(8.4, 8.4, 8.4); Calibrated: 08.30.2019;  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1373; Calibrated: 08.09.2019  Phantom: SAM 5.0; Type: QD000P40CD; Serial: TP:1765  Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) WCDMA 1700 Left Tilted/Middle Channel/Area Scan (51x71x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.876 W/kg WCDMA 1700 Left Tilted/Middle Channel/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 18.94 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 2.24 W/kg SAR(1 g) = 1.03 W/kg; SAR(10 g) = 0.470 W/kg Maximum value of SAR (measured) = 1.53 W/kg 0 dB = 1.53 W/kg = 1.85 dBW/kg Report No: CCISE200604701 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2006047 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 105 of 230 Test Laboratory: CCIS Date/Time: 07.02.2020 16:12:25 DUT: Mobile Phone; Type: KE7; Serial:…

Text truncated - open the document above for the full version.

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCISE200604601 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1. Cover Page FCC REPORT (GSM & WCDMA) Applicant: TECNO MOBILE LIMITED Address of Applicant: ROOM 604 6/F SOUTH TOWER WORLD FINANCE CTR HARBOUR CITY 17 CANTON ROAD TST KL Hong Kong Equipment Under Test (EUT) Product Name: Mobile Phone Model No.: KE7 Trade mark: TECNO FCC ID: 2ADYY-KE7 Applicable standards: FCC CFR Title 47 Part 2 FCC CFR Title 47 Part 22 Subpart H FCC CFR Title 47 Part 24 Subpart E FCC CFR Title 47 Part 27 Subpart L Date of sample receipt: 12 Jun., 2020 Date of Test: 12 Jun., to 28 Jun., 2020 Date of report issued: 29 Jun., 2020 Test Result: PASS* * In the configuration tested, the EUT complied with the standards specified above. Report No: CCISE200604601 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2006046 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 2 of 62 2. Version Version No. Date Description 00 29 Jun., 2020 Original Tested by: Date: 29 Jun., 2020 Test Engineer Reviewed by: Date: 29 Jun., 2020 Project Engineer Report No: CCISE200604601 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2006046 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 3 of 62 3. Contents Page 1. COVER PAGE .............................................................................................................................................................. 1 2. VERSION ....................................................................................................................................................................... 2 3. CONTENTS ................................................................................................................................................................... 3 4. TEST SUMMARY ......................................................................................................................................................... 4 5. GENERAL INFORMATION ........................................................................................................................................ 5 5.1 CLIENT INFORMATION ............................................................................................................................................ 5 5.2 GENERAL DESCRIPTION OF E.U.T. ....................................................................................................................... 5 5.3 TEST MODES .......................................................................................................................................................... 7 5.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................................................ 7 5.5 MEASUREMENT UNCERTAINTY .............................................................................................................................. 7 5.6 ADDITIONS TO, DEVIATIONS, OR EXCLUSIONS FROM THE METHOD....................................................................... 7 5.7 LABORATORY FACIL…

Text truncated - open the document above for the full version.