2ADYY-KL8HSMobile Phone

TECNOMOBILELIMITED Address:FLATN16/FBLOCKBUNIVERSALINDUSTRIALCENTRE19-25SHANMEI STREETFOTANNTHONGKONG Tel.:+86-755-61803856Fax:+86-755-33979211 E-mail:[email protected] CFR47§2.911(d)(5)(i)AttestationLetter AttestationLetter Date:2024-09-25 FEDERALCOMMUNICATIONSCOMMISSIONS AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsCFR47§2.911(d)(5)(i)Filing FCCID:2ADYY-KL8HS TECNOMOBILELIMITEDcertifiesthattheequipmentforwhichauthorizationissought isnot“covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuantto section2.903oftheFCCrules. SincerelyYours, Signature YitingLuo Manager

TECNOMOBILELIMITED Address:FLATN16/FBLOCKBUNIVERSALINDUSTRIALCENTRE19-25SHANMEI STREETFOTANNTHONGKONG Tel.:+86-755-61803856Fax:+86-755-33979211 E-mail:[email protected] CFR47§2.911(d)(5)(ii)AttestationLetter AttestationLetter Date:2024-09-25 FEDERALCOMMUNICATIONSCOMMISSIONS AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsCFR47§2.911(d)(5)(ii)Filing FCCID:2ADYY-KL8HS TECNOMOBILELIMITEDcertifiesthatasofthedateofthefilingoftheapplication,the applicantisnotidentifiedontheCoveredListasanentityproducing“covered”equipment. SincerelyYours, Signature YitingLuo Manager

U.S.AGENTLETTEROFATTESTATION Date:2024-09-25 FEDERALCOMMUNICATIONSCOMMISSION AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsCFR47§2.911(d)(7)Filing FCCID:2ADYY-KL8HS TECNOMOBILELIMITEDcertifiesthat,asofthedateofthefilingoftheapplication, IconsighInc.isourdesignatedU.S.agentforserviceofprocessfortheabovereferenced FCCID.TECNOMOBILELIMITEDacceptstomaintainanagentfornolessthanoneyear afterthegranteehasterminatedallmarketingandimportationortheconclusionofany Commission-relatedproceedinginvolvingtheequipment. IconsighInc.accepts,asofthedateofthefilingoftheapplication,theobligationofthe designatedU.S.agentforserviceofprocessfortheabovereferencedFCCID. DesignatedU.S.AgentInformation: CompanyName:IconsighInc. Address:2310HomesteadRoad,SuiteC1,LosAltos,CA,94024,USA FRN:0033398652 Tel.:+1(408)320-9867 Email:[email protected] Signedby(printedname):BenjaminKaur Signature: Applicant:TECNOMOBILELIMITED Address:FLATN16/FBLOCKBUNIVERSALINDUSTRIALCENTRE19-25SHAN MEISTREETFOTANNTHONGKONG FRN:0024206328 Tel:+86-755-61803856 Email:[email protected] Signedby(printedname):YitingLuo Signature:

TECNOMOBILELIMITED Address:FLATN16/FBLOCKBUNIVERSALINDUSTRIALCENTRE19-25SHAN MEISTREETFOTANNTHONGKONG Tel.:+86-755-61803856Fax:+86-755-33979211 E-mail:[email protected] QA-FR-170-B FCCAuthorization Date:2024-09-25 FEDERALCOMMUNICATIONSCOMMISSIONS AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Subject:AgentAuthorization Towhomitmayconcern: We,TECNOMOBILELIMITEDherebyauthorizesChinaCertificationICTCo.,Ltd (Dongguan)toactonitsbehalfinallmattersrelatingtoapplicationforEquipment authorization,includingthesigningofalldocumentsrelatingtothesematters.Allacts carriedoutbyChinaCertificationICTCo.,Ltd(Dongguan)onourbehalfshallhavethe sameeffectasourownaction. We,theundersigned,herebycertifythatwearenotsubjecttoadenialoffederalbenefits, thatincludesFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseActof1988, 21U.S.C.862. Thisauthorizationisvaliduntilfurtherwrittennoticefromtheapplicant. SincerelyYours, Signature YitingLuo Manager

TECNOMOBILELIMITED Address:FLATN16/FBLOCKBUNIVERSALINDUSTRIALCENTRE19-25SHANMEISTREETFOTANNT HONGKONG Tel.:+86-755-61803856Fax:+86-755-33979211 E-mail:[email protected] FCCConfidentialAuthorization Date:2024-09-25 FEDERALCOMMUNICATIONSCOMMISSIONS AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Subject:ConfidentialityRequestregardingapplicationforcertificationof FCCID:2ADYY-KL8HS InaccordancewithSections0.457and0.459oftheCommission’sRules, TECNOMOBILELIMITEDherebyrequestslong-termconfidentialtreatmentof informationaccompanyingthisapplicationasoutlinedbelow: BlockDiagram Schematics OperationDescription SoftwareSecurityDescription Partlist/TuneupProcedure(forlicenseddevice) Aswellasshort-termconfidentialtreatmentofinformationaccompanyingthis applicationforaperiodof180daysaftergrantisissuedasoutlinedbelow: InternalPhotos User’sManual ExternalPhotos TestSet-upPhotos Theabovematerialscontainproprietaryandconfidentialinformationnotcustomarily releasedtothepublic.Thepublicdisclosureofthesematerialsprovidesunjustified benefitstoitscompetitorsinthemarket. SincerelyYours, Signature YitingLuo Manager

TECNO MOBILE LIMITED Address: FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL CENTRE 19-25 SHAN MEI STREET FOTAN NT HONGKONG Tel.: +86-755-61803856 Fax: +86-755-33979211 E-mail: [email protected] Date:2024-09-25 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, Our product Mobile Phone, model: KL8hs, FCC ID: 2ADYY-KL8HS, for marketing purpose, this product only supports GSM/GPRS/EDGE: 850/1900; WCDMA: Band 2/4/5; LTE: Band 2/4/5/7/12/13/17/38/41/42/66; 5G NR SA Band: n5/n7/n12/n38/n41/n66/n77(3450-3980MHz)/n78(3450-3800MHz); 5G NR NSA Band: DC_2A_n7A, DC_4A_n7A, DC_5A_n7A, DC_7A_n7A, DC_66A_n7A, DC_4A_n38A, DC_5A_n38A, DC_66A_n38A, DC_4A_n41A, DC_5A_n41A, DC_41A_n41A, DC_66A_n41A, DC_2A_n66A, DC_5A_n66A, DC_7A_n66A, DC_66A_n66A, DC_2A_n78A, DC_4A_n78A, DC_5A_n78A, DC_7A_n78A, DC_38A_n78A, DC_41A_n78A, DC_66A_n78A, DC_5A_n77A, DC_7A_n77A, DC_41A_n77A, DC_66A_n77A, DC_2A_38A_n78, DC_2A_7A_n78, DC_2A_66A_n78, DC_5A_7A_n78A, DC_7A_7A_n78A, DC_7A_66A_n78A, DC_7C_n78A, DC_7C_n77A, DC_41C_n41A, DC_41C_n77A, DC_41C_n78A; BDR (GFSK), EDR (π /4-DQPSK, 8DPSK); BLE 1M/2M(BLE 2M only supports 2404-2478MHz); 2.4G Wi-Fi (2412-2462 MHz, 802.11 b/g/n20 mode); 5G Wi-Fi (5150-5250MHz, 5250-5350MHz, 5470-5725MHz, 5725-5850MHz, 802.11a/n20/n40/ac20/ac40/ac80 mode); NFC; GNSS and FM, the other functions, bands and modes were disabled to use by manufacture in the software, the end user has no capability to activate it. Sincerely Yours, Signature Yiting Luo Manager

Lab Lab bel bel locatioon

China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-RF-00A Page 44 of 46 5. RF EXPOSURE EVALUATION 5.1 Applicable Standard According to§15.247(i) and §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB447498 D01 General RF Exposure Guidance v06: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] • [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 5.2 Measurement Result Frequency (MHz) Conducted Output Power Including Tolerance Distance (mm) Calculated value Threshold (1-g) SAR Test Exclusion (dBm) (mW) 2402-2480 4 2.51 5 0.8 3 Yes Note: The Maximum Conducted Power including Tune-up Tolerance was declared by manufacturer. Result: Compliant. The stand-alone SAR test is not necessary.

China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 APPENDIX C CALIBRATION CERTIFICATES China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 DIPOLE CALIBRATION CERTIFICATES China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 D750V3 - SN:1230 Extended Dipole Calibrations DUT Code: ADK Cal Date: 2024/3/23 Description Antenna - Dipole Temperature: 23.7°C Model D750V3 Humidity: 54% Manufacturer SPEAG Pressure 100.6 kPa Certificate No.: D750V3-1230_Mar23 Tester: Karl Gong TEST SPECIFICATIONS Specification: WP 438 SAR Dipole Verification Version:2020 - Rev 0 Specification: Version: TEST PARAMETERS Device Received In Tolerance: Yes Calibrated Frequency Range: N/A Next Cal Due Date: 2024/3/23 Equipment Used to perform Measure Item: Network Analyzer Identifier: NAM Model: 8753B Last Cal: 2023/10/17 Cal Due: 2024/10/16 Item: Calibration/Verificatio n - Kit Identifier: NAM Model: 85032F Last Cal: NCR Cal Due: NCR Item: Terminator Identifier: NANA Model: 85032-10003 Last Cal: 2023/4/29 Cal Due: 2024/4/28 Item: Identifier: Model: Last Cal: Cal Due: Item: Identifier: Model: Last Cal: Cal Due: COMMENTS, OPINIONS and INTERPRETATIONS None Measurement Uncertainty Probability Distribution Impedance (dB) Insertion Loss（dB） Value (dB) Value (+/- %) Expanded uncertainty U (level of confidebce = 95%) Normal(k=2) 0.93 RESULTS Pass This measurement was a calibration verification. (Instrument parameters are within tolerances.) Measurements are traceable to the international System of Units (SI) via NIST CALIBRATION DATA ATTACHED Name Signature Calibrated By: Karl Gong China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 D750V3 - SN:1230 Extended Dipole Calibrations Per FCC KDB 865664 D01, calibration intervals of up to 3 years may be considered for reference dipoles when it is demonstrated that the SAR target, impedance and return loss of a dipole have remained stable according to the following requirements. 1. The measured SAR does not deviate more than 10% from the target on the calibration certificate. 2. The return-loss does not deviate more than 20% from the previous measurement and meets the required 20 dB minimum return-loss requirement. 3. The measurement of real or imaginary parts of impedance does not deviate more than 5Ω from the previous measurement. The following dipole was checked to pass the above 3 requirements to have 3‐year calibration period from calibration date. Return Loss Real Impedence Imaginary Impedence D750V3 - SN:1230 Measured Value (dB) -31.662 Measured Value (Ω) 49.870 -2.606 Target Value (dB) -30.332 TargetValue (Ω) 53.013 0.869 Devation (%) 4.385 Devation (Ω) -3.143 -3.475 Limit (%) ±20 Limit (Ω) 5 5 Limit (< dB) -20 Results Pass Pass Results Pass Name Signature Calibrated By: Karl Gong China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 D900V2 - SN:1d217 Extended Dipole Calibrations Per FCC KDB 865664 D01, calibration intervals of up to 3 years may be considered for reference dipoles when it is demonstrated that the SAR target, impedance and return loss of a dipole have remained stable according to the following requirements. 1. The measured SAR does not deviate more than 10% from the target on the calibration certificate. 2. The return-loss does not deviate more than 20% from the previous measurement and meets the required 20 dB minimum return-loss requirement. 3. The measurement of real or imaginary parts of impedance does not deviate more than 5Ω from the previous measurement. The following dipole was checked to pass the above 3 requirements to have 3-year calibration period from calibration date. Return Loss Real Impedence Imaginary Impedence D900V2 - SN:1d217 Measured Value (dB) -49.309 Measured Value (Ω) 49.663 -0.057 Target Value (dB) -50.111 TargetValue (Ω) 50.312 -0.032 Devation (%) 1.6 Devation (Ω) -0.649 -0.025 Limit (%) ±20 Limit (Ω) 5 5 Limit (< dB) -20 Results Pass Pass Results Pass Name Signature Calibrated By: Karl Gong China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 D1750V2 - SN:1200 Extended Dipole Calibrations Per FCC KDB 865664 D01, calibration intervals of up to 3 years may be considered for reference dipoles when it is demonstrated tha…

Text truncated - open the document above for the full version.

China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 D2600V2 - SN:1206 Extended Dipole Calibrations Per FCC KDB 865664 D01, calibration intervals of up to 3 years may be considered for reference dipoles when it is demonstrated that the SAR target, impedance and return loss of a dipole have remained stable according to the following requirements. 1. The measured SAR does not deviate more than 10% from the target on the calibration certificate. 2. The return-loss does not deviate more than 20% from the previous measurement and meets the required 20 dB minimum return-loss requirement. 3. The measurement of real or imaginary parts of impedance does not deviate more than 5Ω from the previous measurement. The following dipole was checked to pass the above 3 requirements to have 3-year calibration period from calibration date. Return Loss Real Impedence Imaginary Impedence D2600V2 - SN:1026 Measured Value (dB) -29.186 Measured Value (Ω) 52.646 2.431 Target Value (dB) -32.698 TargetValue (Ω) 48.148 1.322 Devation (%) -10.741 Devation (Ω) 4.498 1.109 Limit (%) ±20 Limit (Ω) 5 5 Limit (< dB) -20 Results Pass Pass Results Pass Name Signature Calibrated By: Karl Gong China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 D5GHzV2 ‐ SN:1245 Extended Dipole Calibrations Per FCC KDB 865664 D01, calibration intervals of up to 3 years may be considered for reference dipoles when it is demonstrated that the SAR target, impedance and return loss of a dipole have remained stable according to the following requirements. 1. The measured SAR does not deviate more than 10% from the target on the calibration certificate. 2. The return-loss does not deviate more than 20% from the previous measurement and meets the required 20 dB minimum return-loss requirement. 3. The measurement of real or imaginary parts of impedance does not deviate more than 5Ω from the previous measurement. The following dipole was checked to pass the above 3 requirements to have 3-year calibration period from calibration date. D5GHzV2‐SN:1245 5250MHz Head Date of Measurement Return Loss (dB) Delta (%) Real Impedence(Ω) Delta (Ω) Imaginary Impedence(Ω) Delta (Ω) 2023/8/23 ‐27.774 / 47.004 / ‐2.5973 / 2024/8/20 ‐25.515 ‐8.13 51.281 4.2771.8032 4.4005 5600MHz Head Date of Measurement Return Loss (dB) Delta (%) Real Impedence(Ω) Delta (Ω) Imaginary Impedence(Ω) Delta (Ω) 2023/8/23 ‐30.298 / 49.821 / 3.0464 / 2024/8/20 ‐33.499 10.57 50.527 0.7062.0683 ‐0.9781 5750MHz Head Date of Measurement Return Loss (dB) Delta (%) Real Impedence(Ω) Delta (Ω) Imaginary Impedence(Ω) Delta (Ω) 2023/8/23 ‐33.485 / 51.932 / 0.9611 / 2024/8/20 ‐29.979 ‐10.47 47.897 ‐4.0352.2950 1.3339 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 China Certification ICT Co., Ltd (Dongguan) Report No.:2403W26164E-20 Name Signature Calibrated By: Karl Gong

China Certification ICT Co., Ltd (Dongguan) Report No.: 2403W26164E-20 Page 1 of 52 Test Plot1#: GSM 850_Body Back_Middle Ant3 DUT: Mobile Phone; Type: KL8hs; Serial: 2Q06-1; Communication System: Generic GPRS-4 slots (0); Frequency: 836.6 MHz;Duty Cycle: 1:2 Medium parameters used: f =836.6 MHz; σ = 0.905 S/m; ε r = 42.507; ρ = 1000 kg/m 3 ; Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(8.42, 9.5, 8.93) @836.6 MHz; Calibrated: 2024/3/27;  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1354;Calibrated: 2023/11/17  Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (8x14x1):Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.0686 W/kg Zoom Scan (5x5x7)/Cube 0:Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 5.035 V/m; Power Drift = 0.12 dB Peak SAR (extrapolated) = 0.0810 W/kg SAR(1 g) = 0.047 W/kg; SAR(10 g) = 0.027 W/kg Maximum value of SAR (measured) = 0.0705 W/kg 0 dB = 0.0705 W/kg = -11.52 dB dBW/kg China Certification ICT Co., Ltd (Dongguan) Report No.: 2403W26164E-20 Page 2 of 52 Test Plot2#: GSM 850_Head Right Cheek_Middle Ant7 DUT: Mobile Phone; Type: KL8hs; Serial: 2Q06-1; Communication System: Generic GSM (0); Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used (interpolated): f =836.6 MHz; σ = 0.905 S/m; ε r = 42.507; ρ = 1000 kg/m 3 ; Phantom section: Right Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(8.42, 9.5, 8.93) @836.6 MHz; Calibrated: 2024/3/27;  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1354;Calibrated: 2023/11/17  Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (8x9x1):Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.273 W/kg Zoom Scan (5x5x7)/Cube 0:Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 13.58 V/m; Power Drift = 0.12 dB Peak SAR (extrapolated) = 0.422 W/kg SAR(1 g) = 0.211 W/kg; SAR(10 g) = 0.128 W/kg Maximum value of SAR (measured) = 0.346 W/kg 0 dB = 0.346 W/kg = -4.61 dB dBW/kg China Certification ICT Co., Ltd (Dongguan) Report No.: 2403W26164E-20 Page 3 of 52 Test Plot3#: GSM 850_Body Back_Middle Ant7 DUT: Mobile Phone; Type: KL8hs; Serial: 2Q06-1; Communication System: Generic GPRS-4 slots (0); Frequency: 836.6 MHz;Duty Cycle: 1:2 Medium parameters used (interpolated): f =836.6 MHz; σ = 0.905 S/m; ε r = 42.507; ρ = 1000 kg/m 3 ; Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(8.42, 9.5, 8.93) @836.6 MHz; Calibrated: 2024/3/27;  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1354;Calibrated: 2023/11/17  Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (8x14x1):Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.352 W/kg Zoom Scan (6x6x7)/Cube 0:Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 11.67 V/m; Power Drift = 0.12 dB Peak SAR (extrapolated) = 0.396 W/kg SAR(1 g) = 0.250 W/kg; SAR(10 g) = 0.169 W/kg Maximum value of SAR (measured) = 0.328 W/kg 0 dB = 0.328 W/kg = -4.84 dB dBW/kg China Certification ICT Co., Ltd (Dongguan) Report No.: 2403W26164E-20 Page 4 of 52 Test Plot4#: PCS 1900_Body Bottom_Middle Ant3 DUT: Mobile Phone; Type: KL8hs; Serial: 2Q06-1; Communication System: Generic GPRS-4 slots (0); Frequency: 1880 MHz;Duty Cycle: 1:2 Medium parameters used: f =1880 MHz; σ = 1.394 S/m; ε r = 39.668; ρ = 1000 kg/m 3 ; Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(7.37, 8.32, 7.54) @ 1880 MHz; Calibrated: 2024/3/27  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1354; Calibrated: 2023/11/17  Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (5x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.541 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 18.97 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 0.751 W/kg SAR(1 g) = 0.450 W/kg; SAR(10 g) = 0.244 W/kg Maximum value of SAR (measured) = 0.658 W/kg 0 dB = 0.658 W/kg = -1.82 dBW/kg China Certification ICT Co., Ltd (Dongguan) Report No.: 2403W26164E-20 Page 5 of 52 Test Plot5#: PCS 1900_Head Right Tilt_Middle Ant7 DUT: Mobile Phone; Type: KL8hs; Serial: 2Q06-1; Communication System: Generic GSM (0); Frequency: 1880 MHz;Duty Cycle: 1:8 Medium parameters used: f =1880 MHz; σ = 1.394 S/m; ε r = 39.668; ρ = 1000 kg/m 3 ; Phantom section: Right Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(7.37, 8.32, 7.54) @1880 MHz; Calibrated: 2024/3/27;  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1354;Calibrated: 2023/11/17  Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (8x9x1):Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.344 W/kg Zoom Scan (5x5x7)/Cube 0:Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 8.664 V/m; Power Drift = 0.1 dB Peak SAR (extrapolated) = 0.560 W/kg SAR(1 g) = 0.299 W/kg; SAR(10 g) = 0.154 W/kg Maximum value of SAR (measured) = 0.416 W/kg 0 dB = 0.416 W/kg = -3.81 dB dBW/kg China Certification ICT Co., Ltd (Dongguan) Report No.: 2403W26164E-20 Page 6 of 52 Test Plot6#: PCS 1900_Body Back_Middle Ant7 DUT: Mobile Phone; Type: KL8hs; Serial: 2Q06-1; Communication System: Generic GPRS-4 slots (0); Frequency: 1880 MHz;Duty Cycle: 1:2 Medium parameters used: f =1880 MHz; σ = 1.394 S/m; ε r = 39.668; ρ = 1000 kg/m 3 ; Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(7.37, 8.32, 7.54) @1880 MHz;…

Text truncated - open the document above for the full version.

China Certification ICT Co., Ltd (Dongguan) Report No.: 2403W26164E-20 Page 43 of 52 Test Plot43#: LTE Band 66_Head Right Cheek_1RB_Middle Ant3 DUT: Mobile Phone; Type: KL8hs; Serial: 2Q06-1; Communication System: Generic FDD-LTE (0); Frequency: 1745 MHz;Duty Cycle: 1:1 Medium parameters used: f =1745 MHz; σ = 1.355 S/m; ε r = 41.533; ρ = 1000 kg/m 3 ; Phantom section: Right Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(7.56, 8.56, 7.71) @1745 MHz; Calibrated: 2024/3/27;  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1354;Calibrated: 2023/11/17  Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (8x9x1):Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.0392 W/kg Zoom Scan (5x5x7)/Cube 0:Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 2.988 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 0.0620 W/kg SAR(1 g) = 0.045 W/kg; SAR(10 g) = 0.018 W/kg Maximum value of SAR (measured) = 0.0575 W/kg 0 dB = 0.0575 W/kg = -12.40 dB dBW/kg China Certification ICT Co., Ltd (Dongguan) Report No.: 2403W26164E-20 Page 44 of 52 Test Plot44#: LTE Band 66_Body Back_1RB_Middle Ant3 DUT: Mobile Phone; Type: KL8hs; Serial: 2Q06-1; Communication System: Generic FDD-LTE (0); Frequency: 1745 MHz;Duty Cycle: 1:1 Medium parameters used: f =1745 MHz; σ = 1.355 S/m; ε r = 41.533; ρ = 1000 kg/m 3 ; Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(7.56, 8.56, 7.71) @1745 MHz; Calibrated: 2024/3/27;  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1354;Calibrated: 2023/11/17  Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (8x14x1):Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.383 W/kg Zoom Scan (5x5x7)/Cube 0:Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.329 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.555 W/kg SAR(1 g) = 0.324 W/kg; SAR(10 g) = 0.169 W/kg Maximum value of SAR (measured) = 0.477 W/kg 0 dB = 0.477 W/kg = -3.21 dB dBW/kg China Certification ICT Co., Ltd (Dongguan) Report No.: 2403W26164E-20 Page 45 of 52 Test Plot45#: LTE Band 66_Head Right Cheek_1RB_Middle Ant5 DUT: Mobile Phone; Type: KL8hs; Serial: 2Q06-1; Communication System: Generic FDD-LTE (0); Frequency: 1745 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f =1745 MHz; σ = 1.381 S/m; ε r = 41.172; ρ = 1000 kg/m 3 ; Phantom section: Right Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(7.56, 8.56, 7.71) @1745 MHz; Calibrated: 2024/3/27;  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1354;Calibrated: 2023/11/17  Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (8x9x1):Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.380 W/kg Zoom Scan (5x5x7)/Cube 0:Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 8.148 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.465 W/kg SAR(1 g) = 0.244 W/kg; SAR(10 g) = 0.128 W/kg Maximum value of SAR (measured) = 0.382 W/kg 0 dB = 0.382 W/kg = -4.18 dB dBW/kg China Certification ICT Co., Ltd (Dongguan) Report No.: 2403W26164E-20 Page 46 of 52 Test Plot46#: LTE Band 66_Body Back_50%RB_Middle Ant5 DUT: Mobile Phone; Type: KL8hs; Serial: 2Q06-1; Communication System: Generic FDD-LTE (0); Frequency: 1745 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f =1745 MHz; σ = 1.381 S/m; ε r = 41.172; ρ = 1000 kg/m 3 ; Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(7.56, 8.56, 7.71) @1745 MHz; Calibrated: 2024/3/27;  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1354;Calibrated: 2023/11/17  Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (8x14x1):Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.184 W/kg Zoom Scan (5x6x7)/Cube 0:Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 2.653 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 0.261 W/kg SAR(1 g) = 0.143 W/kg; SAR(10 g) = 0.078 W/kg Maximum value of SAR (measured) = 0.218 W/kg 0 dB = 0.218 W/kg = -6.62 dB dBW/kg China Certification ICT Co., Ltd (Dongguan) Report No.: 2403W26164E-20 Page 47 of 52 Test Plot47#: LTE Band 66_Head Right Tilt_1RB_Middle Ant7 DUT: Mobile Phone; Type: KL8hs; Serial: 2Q06-1; Communication System: Generic FDD-LTE (0); Frequency: 1745 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f =1745 MHz; σ = 1.355 S/m; ε r = 41.533; ρ = 1000 kg/m 3 ; Phantom section: Right Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(7.56, 8.56, 7.71) @1745 MHz; Calibrated: 2024/3/27;  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1354;Calibrated: 2023/11/17  Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (8x9x1):Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.246 W/kg Zoom Scan (5x5x7)/Cube 0:Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 5.363 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 0.263 W/kg SAR(1 g) = 0.145 W/kg; SAR(10 g) = 0.078 W/kg Maximum value of SAR (measured) = 0.228 W/kg 0 dB = 0.228 W/kg = -6.42 dB dBW/kg China Certification ICT Co., Ltd (Dongguan) Report No.: 2403W26164E-20 Page 48 of 52 Test Plot48#: LTE Band 66_Body Top_1RB_Middle Ant7 DUT: Mobile Phone; Type: KL8hs; Serial: 2Q06-1; Communication System: Generic FDD-LTE (0); Frequency: 1745 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f =1745 MHz; σ = 1.355 S/m; ε r = 41.533; ρ = 1000 kg/m 3 ; Phantom section: Flat Section…

Text truncated - open the document above for the full version.

SAR TEST REPORT Applicant: TECNO MOBILE LIMITED Address: FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL CENTRE 19-25 SHAN MEI STREET FOTAN NT HONGKONG FCC ID: 2ADYY-KL8HS Product Name: Mobile Phone Standard(s): 47 CFR Part 2(2.1093) The above device has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: 2403W26164E-20 Date Of Is…

Text truncated - open the document above for the full version.