2ADYY-KO5Mobile Phone

Page 1 Annex A: System Check Report Number: WSCT-ANAB-R&E260200022A-SAR Tested Model : KO5 . Measurement Report for Device, , , UID 0 -, Channel 0 (750.000MHz) Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Device, 50.0 x 10.0 x 8.0 Dipole Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, Head Simulating Liquid , CW, 0-- 750.000, 0 9.16 0.885 43.9 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V5.0 (30deg probe tilt) - 2243 HBBL-600-10000 Charge:xxxx, -- EX3DV4 - SN7951, 2025-09-10DAE4ip Sn1921, 2025-09-04 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 90.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes Grading Ratio N/A 1.5 MAIA N/A N/A Surface Detection VMS + 6p VMS + 6p Scan Method Measured Measured Measurement Results Area Scan Zoom Scan Date 2026-03-022026-03-02 psSAR1g [W/kg] 0.853 0.858 psSAR10g [W/kg] 0.573 0.570 Power Drift [dB] 0.00 0.01 Power Scaling Disabled Disabled Scaling Factor [dB] TSL Correction No correction No correction M2/M1 [%] 86.4 Dist 3dB Peak [mm] 22.1 . Measurement Report for Device, , , UID 0 -, Channel 0 (835.000MHz) Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Device, 50.0 x 10.0 x 8.0 Dipole Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, Head Simulating Liquid , CW, 0-- 835.000, 0 8.89 0.914 416 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V5.0 (30deg probe tilt) - 2243 HBBL-600-10000 Charge:xxxx, -- EX3DV4 - SN7951, 2025-09-10DAE4ip Sn1921, 2025-09-04 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 90.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes Grading Ratio N/A 1.5 MAIA N/A N/A Surface Detection VMS + 6p VMS + 6p Scan Method Measured Measured Measurement Results Area Scan Zoom Scan Date 2026-03-052026-03-05 psSAR1g [W/kg] 0.993 0.994 psSAR10g [W/kg] 0.653 0.655 Power Drift [dB] 0.01 0.02 Power Scaling Disabled Disabled Scaling Factor [dB] TSL Correction No correction No correction M2/M1 [%] 86.2 Dist 3dB Peak [mm] 16.4 . Measurement Report for Device, , , UID 0 -, Channel 0 (1750.000MHz) Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Device, 50.0 x 10.0 x 8.0 Dipole Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, Head Simulating Liquid , CW, 0-- 1750.000, 0 7.6 1.34 41.9 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V5.0 (30deg probe tilt) - 2243 HBBL-600-10000 Charge:xxxx, -- EX3DV4 - SN7951, 2025-09-10DAE4ip Sn1921, 2025-09-04 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 90.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes Grading Ratio N/A 1.5 MAIA N/A N/A Surface Detection VMS + 6p VMS + 6p Scan Method Measured Measured Measurement Results Area Scan Zoom Scan Date 2026-03-092026-03-09 psSAR1g [W/kg] 3.62 3.62 psSAR10g [W/kg] 1.92 1.95 Power Drift [dB] 0.01 0.00 Power Scaling Disabled Disabled Scaling Factor [dB] TSL Correction No correction No correction M2/M1 [%] 83.2 Dist 3dB Peak [mm] 10.8 . Measurement Report for Device, , , UID 0 -, Channel 0 (1900.000MHz) Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Device, 50.0 x 10.0 x 8.0 Dipole Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, Head Simulating Liquid , CW, 0-- 1900.000, 0 7.33 1.44 41.7 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V5.0 (30deg probe tilt) - 2243 HBBL-600-10000 Charge:xxxx, -- EX3DV4 - SN7951, 2025-09-10DAE4ip Sn1921, 2025-09-04 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 90.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes Grading Ratio N/A 1.5 MAIA N/A N/A Surface Detection VMS + 6p VMS + 6p Scan Method Measured Measured Measurement Results Area Scan Zoom Scan Date 2026-03-ϭ22026-03-ϭ2 psSAR1g [W/kg] 4.01 4.04 psSAR10g [W/kg] 2.10 2.11 Power Drift [dB] -0.010.02 Power Scaling Disabled Disabled Scaling Factor [dB] TSL Correction No correction No correction M2/M1 [%] 83.0 Dist 3dB Peak [mm] 9.6 . Measurement Report for Device, , , UID 0 , Channel 0 (2450.000MHz) Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Device, 50.0 x 10.0 x 8.0 Dipole Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, Head Simulating Liquid , CW, 0-- 2450.000, 0 6.94 1.82 41.0 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V5.0 (30deg probe tilt) - 2243 HBBL-600-10000 Charge:xxxx, EX3DV4 - SN7951, 2025-09-10DAE4ip Sn1921, 2025-09-04 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 80.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 10.0 5.0 x 5.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes Grading Ratio N/A 1.5 MAIA N/A N/A Surface Detection VMS + 6p VMS + 6p Scan Method Measured Measured Measurement Results Area Scan Zoom Scan Date 2026-03-16 2026-03-16 psSAR1g [W/kg] 5.18 5.36 psSAR10g [W/kg] 2.40 2.52 Power Drift [dB] -0.06 0.03 Power Scaling Disabled Disabled Scaling Factor [dB] TSL Correction No correction No correction M2/M1 [%] 83…

Text truncated - open the document above for the full version.

Report No.: WSCT-ANAB-R&E260200022A-BT Issued Date: 20 March 2026 Page 2 of 80 TABLE OF CONTENTS 1. Test Certification ..................................................................................... 3 2. Test Result Summary .............................................................................. 4 3. EUT Description ....................................................................................... 5 4. Genera Information .................................................................................. 7 4.1. TEST ENVIRONMENT AND MODE .............................................................................................................. 7 4.2. DESCRIPTION OF SUPPORT UNITS .......................................................................................................... 7 5. Facilities and Accreditations .................................................................. 8 5.1. FACILITIES ............................................................................................................................................ 8 5.2. ACCREDITATIONS ............................................................................................................................ 8 5.3. MEASUREMENT UNCERTAINTY ............................................................................................................... 9 5.4. MEASUREMENT INSTRUMENTS ................................................................................................... 10 6. Test Results and Measurement Data ................................................... 11 6.1. ANTENNA REQUIREMENT ...................................................................................................................... 11 6.2. CONDUCTED EMISSION ........................................................................................................................ 12 6.3. CONDUCTED OUTPUT POWER .............................................................................................................. 16 6.4. 20DB OCCUPY BANDWIDTH ................................................................................................................. 23 6.5. CARRIER FREQUENCIES SEPARATION .................................................................................................. 30 6.6. HOPPING CHANNEL NUMBER ............................................................................................................... 37 6.7. DWELL TIME ........................................................................................................................................ 41 6.8. PSEUDORANDOM FREQUENCY HOPPING SEQUENCE ............................................................................. 52 6.9. CONDUCTED BAND EDGE MEASUREMENT ............................................................................................ 53 6.10. CONDUCTED SPURIOUS EMISSION MEASUREMENT................................................................................ 58 6.11. RADIATED SPURIOUS EMISSION MEASUREMENT ................................................................................... 68 7. Test Setup Photographs ....................................................................... 80 Report No.: WSCT-ANAB-R&E260200022A-BT Issued Date: 20 March 2026 Page 4 of 80 2. Test Result Summary Requirement CFR 47 Section Result Antenna Requirement §15.203/§15.247 (c) PASS AC Power Line Conducted Emission §15.207 PASS Maximum conducted output power §15.247 (b)(1) §2.1046 PASS 20dB Occupied Bandwidth §15.247 (a)(1) §2.1049 PASS Carrier Frequencies Separation §15.247 (a)(1) PASS Hopping Channel Number §15.247 (a)(1) PASS Dwell Time §15.247 (a)(1) PASS Radiated Emission §15.205/§15.209 §2.1053, §2.1057 PASS Band Edge §15.247(d) §2.1051, §2.1057 PASS Note: 1. PASS: Test item meets the requirement. 2. Fail: Test item does not meet the requirement. 3. N/A: Test case does not apply to the test object. 4. The test result judgment is decided by the limit of test standard. Report No.: WSCT-ANAB-R&E260200022A-BT Issued Date: 20 March 2026 Page 5 of 80 3. EUT Description Product Name: Mobile Phone Model : KO5 Trade Mark: TECNO Software version: KO5-16.2.0 Hardware version: V1.1 Operation Frequency: 2402MHz~2480MHz Channel Separation: 1MHz Number of Channel: 79 Modulation Type: GFSK, π/4-DQPSK, 8-DPSK Antenna Type: Integral Antenna Antenna Gain: -0.32dBi Operating Voltage: Adapter1: U600TSA(CY) Input/Entrada: 100-132V~50/60Hz 2.2A Output/Sallda: 5.0V3.0A 15.0W or 5.0-11.0V3.0A 33.0W MAX Input/Entrada: 180-240V~50/60Hz 2.2A Output/Sallda: 5.0V3.0A 15.0W or 5.0-11.0V5.5A 60.0W MAX Adapter2: U600TSA(KX) Input/Entrada: 100-132V~50/60Hz 2.2A Output/Sallda: 5.0V3.0A 15.0W or 5.0-11.0V3.0A 33.0W MAX Input/Entrada: 180-240V~50/60Hz 2.2A Output/Sallda: 5.0V3.0A 15.0W or 5.0-11.0V5.5A 60.0W MAX Rechargeable Li-ion Polymer Battery Model: BL-54DT Rated Voltage: 3.92V Rated Capacity: 5430mAh/21.29Wh Typical Capacity: 5600mAh/21.96Wh Limited Charge Voltage: 4.53V Remark: N/A. Note: 1. N/A stands for no applicable. 2. The antenna gain is provided by the customer. For any reported data issues caused by the antenna gain, World Standardization Certification&Testing Group (Shenzhen) Co., Ltd assumes no responsibility. 3. The laboratory shall be responsible for all information in the report, except for the information provided by the client. The data provided by the client should be clearly identified. In addition, when the information provided by the client may affect the validity of the results, a disclaimer should be included in the report. When the laboratory is not responsible for sampling (such as when the sample is provided by the customer), the results should be declared in the report as applicable to the received sample. Report No.: WSCT-ANAB-R&E260200022A-BT Issued Date: 20 March 2026 Page 6 of 80 Operation Frequency each of channel for GFSK, π/4-DQPSK, 8DPSK Channel Frequency Channel Frequency Channel Frequency Channel Frequency 0 2402…

Text truncated - open the document above for the full version.

ElectricSpecifications TYPE TransmitterFrequency GSM900/WCDMAB8/LTEB8:880-915MHz GSM1800/LTEB3:1710-1785MHz GSM1900/WCDMAB2/LTEB2:1850-1910MHz WCDMAB1/LTEB1:1920-1980MHz WCDMAB4/LTEB4:1710-1755MHz LTEB5/WCDMA5/GSM850:824-849MHz LTEB20:832-862MHz LTEB28:703-748MHz LTEB40:2300-2400MHz LTEB7:2500-2570MHz LTEB12/17:699-716MHz LTEB38/41:2535-2655MHz ReceivedFrequency GSM900/WCDMAB8/LTEB8:925-960MHz GSM1800/LTEB3/:1805-1880MHz GSM1900/WCDMAB2/LTEB2:1930-1990MHz LTEB1/WCDMAB1：2110-2170MHz WCDMAB4/LTEB4:2110-2155MHz LTEB40:2300-2400MHz LTEB38/41:2535-2655MHz LTEB7：2420-2690MHz LTEB12/17:729-746MHz GSM850/WCDMAB5/LTEB5：869-894MHz LTEB20：791-821MHz LTEB28：758-803MHz RF-OutputPower (E.I.R.P) GSM850/900:33+/-2dbm DCS/PCS:30+/-2dbm WCDMAB1/2/4/5/823+/-2dbm LTEB1/2/3/4/5/7/8/12/17/20/28/ 38/40/41/66:22+/-2dbm AntennaGain(Peak Gain) GSM900/WCDMAB8/LTEB8:-4.78 GSM1800/LTEB3/:-2.12 WCDMAB1/LTEB1:-1.52 LTEB5/WCDMA5/GSM850:-5.61 LTEB20:-6.8 LTEB28:-6.84 LTEB40:0.42 LTEB7/B38/B41:1.28 WIFI2.4G:-0.32 WIFI5G:-1.76 GPS:-0.41 Antennasize AntennaGain ANT0 bandGain G900/W8/B8-3.72 bandGain G1800/B3-1.71 bandGain G1900/B2-4.29 bandGain B1/B4/B66/W1-2.79 bandGain B5/W5/G850-3.35 bandGain B20-3.12 bandGain B12/B17/B28-2.78 bandGain B40-1.42 bandGain B7/B38/B41-0.05 ANT1 bandGain B3-2.61 bandGain B2-3.72 bandGain B1/B66-1.93 bandGain B40-0.6 bandGain B7/B38/B41-3.1 ANT2 bandGain G900/W8/B8-4.78 bandGain G1800/B3-2.12 bandGain G1900/B2-2.17 bandGain B1/W1-1.52 bandGain B4/B66-0.93 bandGain B5/W5/G850-5.61 bandGain B20-6.8 bandGain B12/B17-6.9 bandGain B28-6.84 bandGain B400.42 bandGain B7/B38/B411.28 ANT12 bandGain GPS-0.41 bandGain WIFI2.4G-0.32 ANT15 bandGain WIFI5G-1.76

Report No.: WSCT-ANAB-R&E260200022A-SAR SAR Evaluation Report Page 2 of 98 Table of contents 1 General information .......................................................................................................................................... 5 1.1 Notes ........................................................................................................................................................... 5 1.2 Application details ..................................................................................................................................... 5 1.3 Statement of Compliance .......................................................................................................................... 6 1.4 EUT Information ......................................................................................................................................... 8 2 Testing laboratory ........................................................................................................................................... 10 3 ACCREDITATIONS .......................................................................................................................................... 10 4 Test Environment ............................................................................................................................................ 10 5 Applicant and Manufacturer .......................................................................................................................... 10 6 Test standards: ............................................................................................................................................... 11 6.1 RF exposure limits ................................................................................................................................... 12 6.2 SAR Definition .......................................................................................................................................... 12 7 SAR Measurement System ............................................................................................................................ 13 7.1 The Measurement System ...................................................................................................................... 13 7.2 Robot ......................................................................................................................................................... 14 7.3 Probe ......................................................................................................................................................... 15 7.4 DAE............................................................................................................................................................ 16 7.5 Phantom .................................................................................................................................................... 17 7.6 Device Holder ........................................................................................................................................... 18 7.7 SAR Scan General Requirement ............................................................................................................ 19 7.8 Measurement procedure ......................................................................................................................... 20 7.9 Tissue simulating liquids: dielectric properties ................................................................................... 21 7.10 Tissue simulating liquids: parameters .................................................................................................. 22 8 System Check .................................................................................................................................................. 23 8.1 System check procedure ........................................................................................................................ 23 8.2 System check results .............................................................................................................................. 24 9 Test Position Configurations ......................................................................................................................... 25 Report No.: WSCT-ANAB-R&E260200022A-SAR SAR Evaluation Report Page 3 of 98 9.1 Head Exposure Conditions ..................................................................................................................... 25 9.2 Body Exposure Condition ....................................................................................................................... 27 10 SAR Test Configuration ......................................................................................................................... 28 10.1 GSM Test Configurations ........................................................................................................................ 28 10.2 UMTS Test Configuration ........................................................................................................................ 28 10.3 LTE Test Configuration ........................................................................................................................... 30 10.4 Wi-Fi Test Configuration ....................................................................................................................... 32 10.5 WiFi 2.4G SAR Test Procedures ............................................................................................................. 32 11 Detailed Test Results............................................................................................................................... 34 11.1 Conducted Power measurements .......................................................................................................... 34 11.1.1 Conducted Power of GSM ........................…

Text truncated - open the document above for the full version.

Page 1 Annex C Calibration Reports Tested Model : KO5 Report Number: WSCT-ANAB-R&E260200022A-SAR

Page 1 Annex B: Measurement Results Tested Model : KO5 Report Number: WSCT-ANAB-R&E260200022A-SAR . Measurement Report for Device, TILT, GSM 850, Channel 251 (848.800MHz) Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Device, Phone Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity RightHead, Head Simulating Liquid TILT, 0.00 GSM 850 848.800, 251 9.15 0.914 43.6 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 2216 HBBL-600-10000 Charge:xxxx, EX3DV4 - SN7951, 2025-09-10 DAE4ip Sn1921, 2025-09-04 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 120.0 x 210.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes Grading Ratio N/A 1.5 MAIA N/A N/A Surface Detection VMS + 6p VMS + 6p Scan Method Measured Measured Measurement Results Area Scan Zoom Scan Date 2026-03-05 2026-03-05 psSAR1g [W/kg] 0.509 0.597 psSAR10g [W/kg] 0.299 0.290 Power Drift [dB] -0.05 -0.10 Power Scaling Disabled Disabled Scaling Factor [dB] TSL Correction No correction No correction M2/M1 [%] 58.2 Dist 3dB Peak [mm] 5.1 Warning(s) / Error(s) Details Area Scan Zoom Scan Warning(s) Error(s) . Measurement Report for Device, EDGETOP, GSM 850, Channel 251 (848.800MHz) Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Device, Phone Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, Head Simulating Liquid EDGE TOP, 10.00 GSM 850 848.800, 251 9.15 0.914 43.6 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 2216 HBBL-600-10000 Charge:xxxx, EX3DV4 - SN7951, 2025-09-10 DAE4ip Sn1921, 2025-09-04 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 48.0 x 120.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 8.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes Grading Ratio N/A 1.5 MAIA N/A N/A Surface Detection VMS + 6p VMS + 6p Scan Method Measured Measured Measurement Results Area Scan Zoom Scan Date 2026-03-05 2026-03-05 psSAR1g [W/kg] 0.339 0.335 psSAR10g [W/kg] 0.197 0.176 Power Drift [dB] 0.01 0.01 Power Scaling Disabled Disabled Scaling Factor [dB] TSL Correction No correction No correction M2/M1 [%] 79.3 Dist 3dB Peak [mm] 8.4 Warning(s) / Error(s) Details Area Scan Zoom Scan Warning(s) Error(s) . Measurement Report for Device, TILT, PCS 1800, Channel 810 (1909.800MHz) Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Device, Phone Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity RightHead, Head Simulating Liquid TILT, 0.00 PCS 1800 1909.800, 810 7.51 1.42 41.7 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 2216 HBBL-600-10000 Charge:xxxx, EX3DV4 - SN7951, 2025-09-10 DAE4ip Sn1921, 2025-09-04 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 120.0 x 210.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes Grading Ratio N/A 1.4 MAIA N/A N/A Surface Detection VMS + 6p VMS + 6p Scan Method Measured Measured Measurement Results Area Scan Zoom Scan Date 2026-03-12 2026-03-12 psSAR1g [W/kg] 0.351 0.572 psSAR10g [W/kg] 0.191 0.238 Power Drift [dB] 0.03 -0.05 Power Scaling Disabled Disabled Scaling Factor [dB] TSL Correction No correction No correction M2/M1 [%] 74.8 Dist 3dB Peak [mm] 5.8 Warning(s) / Error(s) Details Area Scan Zoom Scan Warning(s) Error(s) . Measurement Report for Device, BACK, PCS 1800, UID 10023, Channel 810 (1909.800MHz) Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Device, 158.2 x 77.9 x 8.0 Phone Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, Head Simulating Liquid BACK, 10.00 PCS 1800 GSM, 10023- 1909.800, 810 7.51 1.42 41.7 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 2219 HBBL-600-10000 Charge:xxxx, EX3DV4 - SN7951, 2025-09-10 DAE4ip Sn1921, 2025-09-04 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 120.0 x 210.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes Grading Ratio N/A 1.5 MAIA N/A N/A Surface Detection VMS + 6p VMS + 6p Scan Method Measured Measured Measurement Results Area Scan Zoom Scan Date 2026-03-12 2026-03-12 psSAR1g [W/kg] 0.618 0.642 psSAR10g [W/kg] 0.345 0.353 Power Drift [dB] 0.00 -0.00 Power Scaling Disabled Disabled Scaling Factor [dB] TSL Correction No correction No correction M2/M1 [%] 84.3 Dist 3dB Peak [mm] 11.9 Warning(s) / Error(s) Details Area Scan Zoom Scan Warning(s) Error(s) . Measurement Report for Device, TILT, Band 2, Channel 9400 (1880.000MHz) Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Device, Phone Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity RightHead, Head Simulating Liquid TILT, 0.00 Band 2 1880.000, 9400 7.51 1.42 41.7 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 2216 HBBL-600-10000 Charge:xxxx, EX3DV4 - SN7951, 2025-09-10 DAE4ip Sn1921, 2025-09-04 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 120.0 x 210.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes…

Text truncated - open the document above for the full version.

(TECNOMOBILELIMITED) (April3,2026) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(i)requestfor(FCCID:2ADYY-KO5) [TECNOMOBILELIMITED](“theapplicant”)certifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedfromreceivingan equipmentauthorizationpursuanttosection2.903oftheFCCrules. Wealsocertifythat,asofthedateofthefilingoftheapplication,theequipmentdoes notutilizecyber-securityoranti-virussoftwarefromKasperskyLab,Inc,oranyofits successorsandassignees,whichisalsoonthe“coveredlist”. Sincerely, YitingLuo/Manger (TECNOMOBILELIMITED) (April3,2026) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(ii)requestfor(FCCID:2ADYY-KO5) [TECNOMOBILELIMITED](“theapplicant”)certifiesthat,asofthedateofthefilingof theapplication,theapplicantisnotidentifiedontheCoveredListasanentityproducing “covered”equipment. Sincerely, YitingLuo/Manger

阻抗与回波损耗记录 750MHZ天线的阻抗和损耗 Impedance and Return Loss of 750MHz Antenna 835MHZ天线的阻抗和损耗 Impedance and Return Loss of 835MHz Antenna 1750MHZ天线的阻抗和损耗 Impedance and Return Loss of 1750MHz Antenna 1900MHZ天线的阻抗和损耗 Impedance and Return Loss of 1900MHz Antenna 2550MHZ天线的阻抗和损耗 Impedance and Return Loss of 2550MHz Antenna 3500MHZ天线的阻抗和损耗 Impedance and Return Loss of 3500MHz Antenna 3700MHZ天线的阻抗和损耗 Impedance and Return Loss of 3700MHz Antenna 5200MHZ天线的阻抗和损耗 Impedance and Return Loss of 5200MHz Antenna 5500MHZ天线的阻抗和损耗 Impedance and Return Loss of 5500MHz Antenna 5800MHZ天线的阻抗和损耗 Impedance and Return Loss of 5800MHz Antenna

偶极子天线验证记录表 Dipole antenna verification record table date Frequency (MHz) Return Loss (dB) Lmpedance,transformed to feed point Manufacturer data 2024.08.19 750 -32.20 51.4Ω-2.06jΩ test data 2025.11.21 750 -32.02 51.6Ω-1.46jΩ Expected next lmpedance,transformed to feed point test on November 20, 2026 date Frequency (MHz) Return Loss (dB) Lmpedance,transformed to feed point Manufacturer data 2024.08.20 835 -29.90 49.1Ω-3.05jΩ test data 2025.11.21 835 -30.60 49.9Ω-4.30jΩ Expected next lmpedance,transformed to feed point test on November 20, 2026 date Frequency (MHz) Return Loss (dB) Lmpedance,transformed to feed point Manufacturer data 2024.08.20 1750 -32.80 47.8Ω-0.26jΩ test data 2025.11.21 1750 -31.33 48.3Ω-2.16jΩ Expected next lmpedance,transformed to feed point test on November 20, 2026 date Frequency (MHz) Return Loss (dB) Lmpedance,transformed to feed point Manufacturer data 2024.08.19 1900 -27.10 50.8Ω+4.38jΩ test data 2025.11.21 1900 -24.33 51.8Ω-5.94jΩ Expected next lmpedance,transformed to feed point test on November 20, 2026 date Frequency (MHz) Return Loss (dB) Lmpedance,transformed to feed point Manufacturer data 2024.08.16 2550 -37.40 50.4Ω-1.3jΩ test data 2025.11.21 2550 -37.11 50.6Ω-1.99jΩ Expected next lmpedance,transformed to feed point test on November 20, 2026 date Frequency (MHz) Return Loss (dB) Lmpedance,transformed to feed point Manufacturer data 2024.10.17 3500 -27.0 51.7Ω+4.2jΩ test data 2025.11.22 3500 -26.6 49.5Ω+0.56jΩ Expected next lmpedance,transformed to feed point test on November 20, 2026 date Frequency (MHz) Return Loss (dB) Lmpedance,transformed to feed point Manufacturer data 2024.10.17 3700 -22.6 43.3Ω+1.6jΩ test data 2025.11.22 3700 -22.2 43.3Ω-4.67jΩ Expected next lmpedance,transformed to feed point test on November 20, 2026 date Frequency (MHz) Return Loss (dB) Lmpedance,transformed to feed point Manufacturer data 2024.10.17 5200 -25.0 53.3Ω-4.8jΩ test data 2025.11.24 5200 -25.5 52.7Ω-2.40jΩ Expected next lmpedance,transformed to feed point test on November 20, 2026 date Frequency (MHz) Return Loss (dB) Lmpedance,transformed to feed point Manufacturer data 2024.10.17 5500 -29.5 47.6Ω-2.2jΩ test data 2025.11.24 5500 -28.6 49.8Ω-2.98jΩ Expected next lmpedance,transformed to feed point test on November 20, 2026 date Frequency (MHz) Return Loss (dB) Lmpedance,transformed to feed point Manufacturer data 2024.10.17 5800 -27.5 50.5Ω+4.2jΩ test data 2025.11.24 5800 -27.7 49.2Ω+5.12jΩ Expected next lmpedance,transformed to feed point test on November 20, 2026

Item No Parent Material Parent Material Description SAP Code Engineering D…

Text truncated - open the document above for the full version.