2ADZRG240WBGPON ONU

R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01 Alcatel-Lucent 7368 INTELLIGENT SERVICES ACCESS MANAGER ONT G-2 40W-B P R O D UC T GU IDE Alcatel-Lucent Proprietary This document contains proprietary information of Alcatel-Lucent and is not to be disclosed or used except in accordance with applicable agreements. Copyright 2014 © Alcatel-Lucent. All rights reserved. R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01 Alcatel-Lucent assumes no responsibility for the accuracy of the information presented, which is subject to change without notice. Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. Copyright 2014 Alcatel-Lucent. All rights reserved. Disclaimers Alcatel-Lucent products are intended for commercial uses. Without the appropriate network design engineering, they must not be sold, licensed or otherwise distributed for use in any hazardous environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life-support machines, or weapons systems, in which the failure of products could lead directly to death, personal injury, or severe physical or environmental damage. The customer hereby agrees that the use, sale, license or other distribution of the products for any such application without the prior written consent of Alcatel-Lucent, shall be at the customer's sole risk. The customer hereby agrees to defend and hold Alcatel-Lucent harmless from any claims for loss, cost, damage, expense or liability that may arise out of or in connection with the use, sale, license or other distribution of the products in such applications. This document may contain information regarding the use and installation of non-Alcatel-Lucent products. Please note that this information is provided as a courtesy to assist you. While Alcatel-Lucent tries to ensure that this information accurately reflects information provided by the supplier, please refer to the materials provided with any non-Alcatel-Lucent product and contact the supplier for confirmation. Alcatel-Lucent assumes no responsibility or liability for incorrect or incomplete information provided about non-Alcatel-Lucent products. However, this does not constitute a representation or warranty. The warranties provided for Alcatel-Lucent products, if any, are set forth in contractual documentation entered into by Alcatel-Lucent and its customers. This document was originally written in English. If there is any conflict or inconsistency between the English version and any other version of a document, the English version shall prevail. When printed by Alcatel-Lucent, this document is printed on recycled paper. R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01 Preface This preface provides general information about the documentation set for optical network terminals (ONTs). Scope This documentation set provides information about safety, features and functionality, ordering, hardware installation and maintenance, and software installation procedures for the current release. Audience This documentation set is intended for planners, administrators, operators, and maintenance personnel involved in installing, upgrading, or maintaining the ONTs. Required knowledge The reader must be familiar with general telecommunications principles. Acronyms and initialisms The expansions and optional descriptions of most acronyms and initialisms appear in the glossary. Alcatel-Lucent 7368 ISAM ONT iii Edition 01 G-240W-B Product Guide R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01 Preface Assistance and ordering phone numbers Alcatel-Lucent provides global technical support through regional call centers. Phone numbers for the regional call centers are available at the following URL: http://www.alcatel-lucent.com/myaccess. For ordering information, contact your Alcatel-Lucent sales representative. Alcatel-Lucent quality processes Alcatel-Lucent’s ONT manufacturing, testing, and inspecting practices are in compliance with GR-1252-CORE and TL 9000 requirements. These requirements are documented in the Operations Quality Plan 8BD-00023-4204-QRZZA, the Alcatel North American Quality Manual 8BD-00001-0000-QRZZA, and the Wireline Network Quality Manual 8AB-83179-0001-QRAAA. The quality plans and practices adequately ensure that technical requirements and customer end-point requirements are met. The customer or its representatives may be allowed to perform on-site quality surveillance audits, as agreed upon during contract negotiations. Safety information For safety information, see the appropriate safety guidelines chapter. Documents Documents are available using ALED or OLCS. Procedure 1 To download a ZIP file package of the customer documentation 1 Navigate to http://www.alcatel-lucent.com/myaccess and enter your user name and password. If you are a new user and require access to this service, please contact your Alcatel-Lucent sales representative. 2 From the Technical Content for drop-down menu, choose the product. 3 Click on Downloads: Electronic Delivery. 4 Choose Documentation from the drop-down menu and click Next. 5 Select the image from the drop-down menu and click Next. 6 Follow the on-screen directions to download the file. iv Alcatel-Lucent 7368 ISAM ONT Edition 01 G-240W-B Product Guide R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01 Preface Procedure 2 To access individual documents Individual PDFs of customer documents are also accessible through the Alcatel-Lucent Customer Support website. 1 Navigate to http://www.alcatel-lucent.com/myaccess and enter your user name and password. If you are a new user and require access to this service, please contact your Alcatel-Lucent sales representative. 2 From the Technical Content for drop-down menu, choose the product. 3 Click on Manuals and Guid…

Text truncated - open the document above for the full version.

CERTIFICATE OF COMPLIANCE Authorized under Declaration of Conformity according to 47 CFR, Part 2 and Part 15 of the FCC Rules. The product listed in follows was (were) tested in the BTL EMC Laboratory to comply with the criteria limits Class B of conducted and radiated emissions of the Technical Standards FCC Part 15, Subpart B, established by the FCC, USA. Equipment GPON ONU Model Name G-240W-B Brand Name Alcatel-Lucent Applicant Alcatel-Lucent Shanghai Bell Co. Ltd. Address 6B602, 388 Ningqiao Road Pudong, Shanghai Standard(s) FCC Part 15, Subpart B: 2013 ANSI C63.4-2009 Report(s) BTL-FCCE-1-1411C236 The test data, data evaluation, and equipment configuration contained in our test report(s) above was(were) obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO-17025 quality assessment standard and technical standard(s). The test data contained in the referenced test report relate only to the EUT sample and item(s) tested. Andy Chiu Authorized Signatory BTL INC. B1, No. 37, Lane 365, Yang-Guang St., Nei-Hu District, Taipei City 114, Taiwan. TEL:+886-2-2657-3299 FAX:+886-2-2657-3331

Project No.: 1411C236 Page 2 of 18 Project No.: 1411C236 Page 3 of 18 Project No.: 1411C236 Page 4 of 18 Project No.: 1411C236 Page 5 of 18 Project No.: 1411C236 Page 6 of 18 Project No.: 1411C236 Page 7 of 18

印刷盒底标贴 贝尔 1. 彩色印刷，无边框, 尺寸如图,直角. 2.材料: 50＃亮白PET，过哑面打印膜,背胶. NOTES(技术要求）: (Material:50# bright white PET with matte printing film,adhesive) (Color printing,no frame,Right angle) 611000004194 G-240W-B(L120A) 郭凯敏 郁兴华 N/A 1 2 3 4 A B C D 56 1 2 3 4 56 A B C D DATE: 1:1 XXXX N/A CHECK DRAW PDE A0 Editor Description Remark Date SHANGHAI GONGJIN TELECOM TECHNOLOGY CO.,LTD. 14/10/30 3. 原材料及后处理工艺均能满足我司《环保技术标准》要求 (Raw materials and the corresponding post processing should meet requirements defined in the T&W Environmental Protection Technical Standards.) 4.打印字体: 中文采用黑体,英文采用Calibri字体 (Font Type: "BLACK BOLD" in Chinese, "Calibri" in English) 以下由供应商印刷:以下由工厂打印: PANTONE 136C 条码内容:XXXXXXXXXXXX 见生产信息发布流程 见生产信息发布流程 条码内容:ALCLXXXXXXXX 条码内容:468015 BVMDZ00CRA为CLEI code 其中”00”是数字零 !注意:此条码内容固定为468015 与下方BVMDZ00CRA无关 注: 海外版产品本体上的标贴为ONT P/N, 彩盒,外箱, 栈板上标贴为KIT P/N, 二者不同 G-240W-B ICS: XX MRev: XX MONTH: XX MFG: YEAR: XXXX 实际生产月份,十进制, 如1月份为01, 12月份为12 固定 固定,产品型号 具体内容由产品经理提供 具体内容由产品经理提供 实际生产年份,十进制, 如2014, 2015等 注:注: 条码内容:3FE56756BAAA 48.0 mm 42.0 m m 48.0 mm 42.0 m m ONT P/N:3FE56756BAAA MAC:XXXXXXXXXXXX ID:ALCLXXXXXXXX BVMDZ00CRA Model: G-240W-B ICS: XX MRev: XX MONTH: XX MFG: YEAR: XXXX

Project No.: 1411C236 Page 8 of 18 Project No.: 1411C236 Page 9 of 18 Project No.: 1411C236 Page 10 of 18 Project No.: 1411C236 Page 11 of 18 Project No.: 1411C236 Page 12 of 18 Project No.: 1411C236 Page 13 of 18 Project No.: 1411C236 Page 14 of 18 Project No.: 1411C236 Page 15 of 18 Project No.: 1411C236 Page 16 of 18 Project No.: 1411C236 Page 17 of 18 Project No.: 1411C236 Page 18 of 18

FCC RF EXPOSURE REPORT FCC ID: 2ADZRG240WB Project No. : 1411C236 Equipment : GPON ONU Model : G-240W-B Applicant : Alcatel-Lucent Shanghai Bell Co. Ltd. Address : 6B602, 388 Ningqiao Road Pudong, Shanghai, China According: : FCC Guidelines for Human Exposure IEEE C95.1 BTL INC. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, China. TEL: +86-769-8318-3000 FAX: +86-769-8319-6000 MPE CALCULATION METHOD: Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Table for Filed Antenna 2.4G Ant. Brand Model Name Antenna Type Connector Gain(dBi) 1 Airgain N2420S Embedded U.FL 3.20 2 Airgain N2420S Embedded U.FL 3.20 3 Airgain N2420S Embedded U.FL 3.20 5G Ant. Brand Model Name Antenna Type Connector Gain(dBi) 1 Airgain N5x20B Embedded N/A 2.90 2 Airgain N5x20B Embedded N/A 2.90 3 Airgain N5x20B Embedded N/A 2.90 4 Airgain N5x20B Embedded N/A 2.90 2.4G Only MPE EUT： GPON ONU Model Name : G-240W-B Temperature : 25 °C Relative Humidity: 55 % Test Voltage : AC 120V/60Hz Test Mode : TX N20 MODE /CH01, CH06, CH11 Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 3.20 2.0893 29.59 909.9133 0.378399341 Complies 5G Only MPE EUT： GPON ONU Model Name : G-240W-B Temperature : 25 °C Relative Humidity: 55 % Test Voltage : AC 120V/60Hz Test Mode : TX AC40 MODE/CH151,CH159 Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 2.90 1.9498 23.62 230.1442 0.095708471 Complies So for 2.4G+5G simultaneous transmission MPE: 0.3784/1+0.0957/1=0.4741 Note: the calculated distance is 20 cm.

Report No No .: BTL-FCC This repo Project N Equipme Model Na Applican Address Date of R Date of T Issued D Tested b y Testing Techni c Authori z B o.3, Jins TEL: + CP-3-1411C2 FCC FCC ort concern No. : ent : ame : nt : : Receipt : Test : ate : y : Enginee r cal Manage zed Signat BT hagang +86-769- 236 C DFS C ID: 2 ns (check o 1411C23 6 GPON O N G-240W- B Alcatel-L u 6B602, 3 8 Nov. 24, 2 Nov. 24, 2 Feb. 12, 2 BTL Inc. r ory TL 1st Road Guan 8318-30 S Tes 2ADZR one): Or 6 NU B ucent Shang 88 Ningqiao 2014 2014 ~ Feb 2015 : : : L I d, Shixia ngdong, C 000 FA st Rep RG240 iginal Gran ghai Bell Co o Road Pud . 11, 2015 (Davi d (Leo H (Steve IN a, Dalang China. AX: +86- port 0WB nt Class o. Ltd. dong, Shang d Mao) Hung) en Lu) C. g To w n , D 769-831 II Change ghai . Donggua 9-6000 Page 1 of an, 64 Report No Decla r BTL re p and tha Laborat BTL's r to ensu mecha n drawn b BTL’s r agency This re p BTL-se approva BTL’s l a and acc Limitat For the test re p .: BTL-FCC ration presents to t at test instrum tory (NML) o eports apply re that addit nical compon by the client o reports must of the Gove port is the co elf, extracts f al. aboratory qu credited by th tion use of the au port is (are) in CP-3-1411C2 the client tha ments used h of R.O.C., or y only to the s tional produc nents. BTL s or others fro t not be use rnment. onfidential pr rom the test ality assura n he conformity uthority's log ncluded in th 236 at testing is has been cali National Inst specific sam ction units of shall have n m BTL issue ed by the cli roperty of th report shall nce procedur y assessmen go is limited u e conformity done in ac c ibrated with t titute of Stan ples tested u this model a no liability for ed reports. ent to claim e client. As not be repro res are in com nt authorities unless the Te y assessmen cordance with the standard ndards and Te under conditi are manufac r any declar product en d a mutual pro duced excep mpliance wit s listed in this est Standard( t authorities h standard p s traceable t Technology (N ons. It is ma ctured with th ations, infere dorsement b otection to th pt in full with h the ISO G u s test report. (s)/Scope(s)/ acceptance procedures a to National M NIST) of U.S anufacture’s r he identical e ences or ge by the autho he clients, th BTL’s autho uide17025 re /Item(s) men respective. Page 2 of as applicable Measurement .A. responsibility electrical and neralizations orities or any he public and orized written equirements tioned in thi s 64 e t y d s y d n , s Report No 1 . CE 2 . EU 2.1 2.4 3 .U-N 3.1 3.2 4 . TE 5 .EM 5.1 5.2 5.3 6 . TE 6.1 6.2 .: BTL-FCC ERTIFICAT UT INFORM 1 EUT SPEC 4 EUT MAX NII DFS RU 1 WORKING 2 TEST LIM EST INSTR MC EMISSI 1 DFS MEA 2 CALIBRA 3 DEVIATIO EST RESU 1 SUMMAR 2 DETELED 6.2.1 TEST 6.2.2 DFS 6.2.3 CH A 6.2.4CHAN TRAFFIC 6.2.5 NO N 6.2.6 UNIF 6.2.7 U-NI CP-3-1411C2 TION MATION CIFICATION XIMUM AND ULE REQU G MODES A MITS AND R RUMENTS ION TEST ASUREMEN ATION OF D ON FROM T LTS RY OF TEST D TEST RES T MODE: D DETECTIO ANNEL AVA NNEL CLO N- OCCUPA FORM SPR I DETECTIO 236 Table of N TABLE D MINIMUM UIREMENT AND REQU RADAR SIG NT SYSTEM DFS DETEC TEST STAN T RESULT SULTS DEVICE OP ON THRESH AILABILITY SING TRA N ANCY PERI READING ON BANDW f Contents M E.I.R.P. PO TS UIRED TES GNAL PARA M: CTION THR NDARD PERATING I HOLD YCHECK TI NSMISSION OD WIDTH OWER T ITEMS AMETERS RESHOLD L IN MASTER IME N AND CHA LEVEL: R MODE. ANNEL MO OVE TIME W Page 3 of Page 5 6 6 8 9 9 10 13 14 14 16 16 17 17 18 18 18 24 WLAN 33 57 59 59 64 Report No BTL-F .: BTL-FCC Issued No FCCP-3-141 CP-3-1411C2 . 11C236 236 REPORT T ISSUED H Des Origin HISTORY scription al Report. Issu Feb. Page 4 of ued Date . 12, 2015 64 Report No 1. CERT Equi p Brand Mode Applic Manu Addre Fact o Addre Date Te s t S Stand The abo standar d The test BTL-FC C that has standar d Test re s .: BTL-FCC TIFICATION pment : d Name : el Name : cant : ufacturer : ess : ory : ess : of Test: : Sample : dard(s) : ve equipm e ds by BTL In data, data CP-3-1411C been accre d and techn sult include CP-3-1411C2 N GPON ON Alcatel-Lu G-240W-B Alcatel-Lu Alcatel-Lu 6B602, 38 1. Taicang 2. Shenzh 1. Jiangna 2. No 2&3 Building, 1 518105,P. Nov. 24, 2 ENGINEE FCC Part FCC KDB ent has bee nc. evaluation, C236) were edited by the ical standar ed in this re 236 NU ucent B ucent Shang ucent Shang 88 Ningqiao g T&W Elec hen Gongjin an Road 89 3 Buildings, 1#Songgan R.China 2014 ~ Feb. ERING SAM 15, Subpar 789033 D0 en tested an and equipm e obtained u e Authority rd(s). eport is on ghai Bell Co ghai Bell Co o Road Pudo tronics Co., n Electronics ,Ludu Town Mingwei Fa g Road Son 12, 2015 MPLE rt E (Section 02 General nd found com ment config utilizing the t of TAF acc nly for the D o. Ltd. o. Ltd. ong, Shang ,Ltd. s Co.,Ltd. n,Taicang,Ji actory Area nggang Sub n 15.407) UNII Test P mpliance w guration con test proced cording to th DFS Mode ghai angsu 215 4 , Songgang b-District,Sh Procedures with the requ ntained in ou ures, test in he ISO-1702 part of the 412,P.R.Ch g Road Wes henzhen,Gu New Rules uirement of t ur test repo nstruments, 25 quality a product. Page 5 of ina st,No. A uangdong, v01 the relative rt (Ref No. test sites assessment 64 Report No 2. EUT I 2.1EUT Produ Brand Mode FCC I Softw Hardw Opera Opera Modu Note: Th 2.2 DE S Table 2: Ant. 4 5 6 7 .: BTL-FCC NFORMAT SPECIFICA uct name d Name el ID ware Versio ware Versio ational Mod ating Frequ ulation his device w SCRIPTION Antenna lis Manufactur Airgain Airgain Airgain Airgain CP-3-1411C2 TION ATION TAB on on de uencyRang was function N OF AVAIL st. rer Mode N5 N5 N5 N5 G‐24 236 BLE Table 1 GPON Alcate G-240 2ADZ FE56 3FE 5 Maste ge 5260 ~ OFDM ned as a LABLE ANT el Name 5x20B 5x20B 5x20B 5x20B 40W‐B KIT 3F 3F 3F 3F : Specificat N ONU el-Lucent 0W-B ZRG240WB 557AFBB29 56756 BAAA er ~5320MHz& M . Master TENNAS TO Antenna T Embedde Embedde Embedde Embedde T Part Number E56636AAAA E56636BAAA E56636CAAA E56636CBAA tion of EUT B 9 A &5500~570 Slave de O THE EUT ypeConn ed N…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-1-1411C236 Page 1 of 155 FCC Radio Test Report FCC ID: 2ADZRG240WB This report concerns (check one): Original Grant Class II Change Project No. : 1411C236 Equipment : GPON ONU Model Name : G-240W-B Applicant : Alcatel-Lucent Shanghai Bell Co. Ltd. Address : 6B602, 388 Ningqiao Road Pudong, Shanghai Date of Receipt : Nov. 24, 2014 Date of Test : Nov. 24, 2014 ~ Dec. 19, 2014 Issued Date : Dec. 22, 2014 Tested by : BTL Inc. Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) BTL INC. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, Guangdong, China. TEL: +86-769-8318-3000 FAX: +86-769-8319-6000 Report No.: BTL-FCCP-1-1411C236 Page 2 of 155 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C, or National Institute of Standards and Technology (NIST) of U.S.A. BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. BTL’s reports must not be used by the client to claim product endorsement by the authorities or an y agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and BTL-self, extracts from the test report shall not be reproduced except in full with BTL’s authorized written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Report No.: BTL-FCCP-1-1411C236 Page 3 of 155 Table of Contents Page 1 . CERTIFICATION 6 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 3 . GENERAL INFORMATION 9 3.1 GENERAL DESCRIPTION OF EUT 9 3.2 DESCRIPTION OF TEST MODES 11 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 12 3.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 13 3.5 DESCRIPTION OF SUPPORT UNITS 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 TEST PROCEDURE 14 4.1.3 DEVIATION FROM TEST STANDARD 14 4.1.4 TEST SETUP 15 4.1.5 EUT OPERATING CONDITIONS 15 4.1.6 EUT TEST CONDITIONS 15 4.1.7 TEST RESULTS 15 4.2 RADIATED EMISSION MEASUREMENT 16 4.2.1 RADIATED EMISSION LIMITS 16 4.2.2 TEST PROCEDURE 17 4.2.3 DEVIATION FROM TEST STANDARD 17 4.2.4 TEST SETUP 17 4.2.5 EUT OPERATING CONDITIONS 18 4.2.6 EUT TEST CONDITIONS 18 4.2.7 TEST RESULTS (9KHZ TO 30MHZ) 19 4.2.8 TEST RESULTS (BETWEEN 30MHZ TO 1000 MHZ) 19 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 19 5 . BANDWIDTH TEST 20 5.1 APPLIED PROCEDURES 20 5.1.1 TEST PROCEDURE 20 5.1.2 DEVIATION FROM STANDARD 20 5.1.3 TEST SETUP 20 5.1.4 EUT OPERATION CONDITIONS 20 5.1.5 EUT TEST CONDITIONS 20 5.1.6 TEST RESULTS 20 Report No.: BTL-FCCP-1-1411C236 Page 4 of 155 Table of Contents Page 6 . MAXIMUM PEAK CONDUCTED OUTPUT POWER TEST 21 6.1 APPLIED PROCEDURES / LIMIT 21 6.1.1 TEST PROCEDURE 21 6.1.2 DEVIATION FROM STANDARD 21 6.1.3 TEST SETUP 21 6.1.4 EUT OPERATION CONDITIONS 21 6.1.5 EUT TEST CONDITIONS 21 6.1.6 TEST RESULTS 21 7 . ANTENNA CONDUCTED SPURIOUS EMISSION 22 7.1 APPLIED PROCEDURES / LIMIT 22 7.1.1 TEST PROCEDURE 22 7.1.2 DEVIATION FROM STANDARD 22 7.1.3 TEST SETUP 22 7.1.4 EUT OPERATION CONDITIONS 22 7.1.5 EUT TEST CONDITIONS 22 7.1.6 TEST RESULTS 22 8 . POWER SPECTRAL DENSITY TEST 23 8.1 APPLIED PROCEDURES / LIMIT 23 8.1.1 TEST PROCEDURE 23 8.1.2 DEVIATION FROM STANDARD 23 8.1.3 TEST SETUP 23 8.1.4 EUT OPERATION CONDITIONS 23 8.1.5 EUT TEST CONDITIONS 23 8.1.6 TEST RESULTS 23 9 . MEASUREMENT INSTRUMENTS LIST 24 10 . EUT TEST PHOTO 26 ATTACHMENT A - CONDUCTED EMISSION 30 ATTACHMENT B - RADIATED EMISSION (9KHZ TO 30MHZ) 33 ATTACHMENT C - RADIATED EMISSION (30MHZ TO 1000MHZ) 35 ATTACHMENT D - RADIATED EMISSION (ABOVE 1000MHZ) 42 ATTACHMENT E - BANDWIDTH 91 ATTACHMENT F – MAXIMUM PEAK CONDUCTED OUTPUT POWER 100 ATTACHMENT G - ANTENNA CONDUCTED SPURIOUS EMISSION 104 ATTACHMENT H - POWER SPECTRAL DENSITY 137 Report No.: BTL-FCCP-1-1411C236 Page 5 of 155 REPORT ISSUED HISTORY Issued No. Description Issued Date BTL-FCCP-1-1411C236 Original Issue. Dec. 22, 2014 Report No.: BTL-FCCP-1-1411C236 Page 6 of 155 1. CERTIFICATION Equipment : GPON ONU Brand Name : Alcatel-Lucent Model Name : G-240W-B Applicant : Alcatel-Lucent Shanghai Bell Co. Ltd. Manufacturer : Alcatel-Lucent Shanghai Bell Co. Ltd. Address : 6B602, 388 Ningqiao Road Pudong, Shanghai Factory : 1. Taicang T&W Electronics Co.,Ltd. 2. Shenzhen Gongjin Electronics Co.,Ltd. Address : 1. Jiangnan Road 89,Ludu Town,Taicang,Jiangsu 215412,P.R.China 2. No 2&3 Buildings, Mingwei Factory Area, Songgang Road West,No. A Building, 1#Songgang Road Songgang Sub-District,Shenzhen,Guangdong, 518105,P.R.China Date of Test : Nov. 24, 2014 ~ Dec. 19, 2014 Test Sample : ENGINEERING SAMPLE Standard(s) : FCC Part15, Subpart C: 2013 (15.247) / ANSI C63.4-2009 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. BTL-FCCP-1-1411C236) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO-17025 quality assessment standard and technical standard(s). Report No.: BTL-FCCP-1-1411C236…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-1-1411C236 Page 26 of 155 10. EUT TEST PHOTO Conducted Measurement Photos Report No.: BTL-FCCP-1-1411C236 Page 27 of 155 Radiated Measurement Photos 9KHz to 30MHz Report No.: BTL-FCCP-1-1411C236 Page 28 of 155 Radiated Measurement Photos 30MHz to 1000MHz Report No.: BTL-FCCP-1-1411C236 Page 29 of 155 Radiated Measurement Photos Above 1000MHz