2AE3CBE1036Twin Wireless Earbuds with Charging Case

Shenzhen Kinlan Technology Company Limited West of 3F, Building A4, Yinlong Industrial Park No.292 Shenshan Road, Longgang District Shenzhen, Guangdong, China BE1036 Twin Wireless Earbuds with Charging Case 1. Identify the left and right earbuds 2. Rotate the earbuds,and ajust to find the best angel 3. Make sure the ear tip seals in the ear canal 3 How to fit? 6 Function Specification FCC Warning Wireless EarbudsEartips (S,L) Small EarhooksEar loops User Manual Type-C Cable Product Diagram LED Indicator / Microphone Touch Area Charging Pin Type-C charging port LED Indicator 1 Charging Case What's in the box? • Both earbuds will automatically turn on while open the charging case(with the Green LED lights flashing). • Put the earbuds back to the charging case and close the lid to turn them off. 4 Power On / Power Off • In the shutdown status and when the earbuds are not in the charging case. Simultaneously click and hold the MFB of both earbuds for 3 seconds to power on (with the Green LED lights flashing). • If the earbuds are not in the charging case. Pause music first,click and hold the MFB of both earbuds for 3 seconds to turn them off. Earbuds automatically charge in case 2 Charging • Remove the protective film from the earbuds when using for the first time. • Fully charge both earbuds and the charging case before the first-time using. • To prevent damage, use the provided USB-C cable. • Fully dry off the earbuds and the USB port before charging. 5 Pairing your earbuds • Both earbuds will automatically turn on (with the Green and red LED lights flashing) and start pairing while open the charging case. Note: The earbuds will automatically connect with the device their last paired with when earbuds are power on. • Selet "BE1036" from the list of devices shown 78 Reset and Reconnecting If you fail to build connection between two earbuds, or between two earbuds and your phone,please try the follow step: 0%-20%20%-60%60%-100% Each earbud could be used independently Step 2: Power on both earbuds, quick click Left or Right earbuds 5 times when they are in pairing mode. Step 3: Turn on your smart devices and select “BE1036” to confirm pairing. lnputDC 5V/1A Wireless VersionV5.1 Support ProfileA2DP,AVRCP, HFP, HSP Maximum Working Range 10m(without obstacle) Earbuds battery lifeUp to 6 hours(various by volume and audio content) Earbud Charging TimeAbout 1.5 hours Earbud Battery Capacity50mAh Charging Case Battery Capacity 500mah Case Charging Time2 hours Charging Case Recharge Earbuds 3-4 times Product Weight83g 1 3 5 6 7 8 9 10 4 2 3s3s X5 The charging case indicator will automatically turn off when the earbuds fully charged. R BE1036 Bluetooth Bluetooth 12:00 Settings MY DEVICES Connected Step 1: Delete the old connection on your device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. Play/PauseSingle Click(L or R) Double Click(R) Double Click(L) Long press L/Long Press R Next Song Previous Song Volume up/down X1 X1 X1 X1 Answer/End CallSingle Click(L or R) Double Click(L or R)Reject Call X1 X1 Siri/Google Assistant Triple Click(L or R) 4 5 1 2 3 1 2 3 4 5 Charging Case Indicator OnOff Please read this manual carefully before using the product and keep it in a safe place.

Co m Ad d Lon Pr o Mo d Pr o We act We an d issu our Sig Na m Title Com mpany: Sh dress: Wes nggang Dis oduct Name del Numbe oduct Desc authorize M on our beha declare tha d certificatio ues concern behalf shal nature: me: e: mpany: She enzhen Kin st of 3F, Bu strict Shenz e: Twin Wir er(s): BE103 ription: Tw MiCOM Lab alf on all ma at MiCOM L n of equipm ning the app ll have the s Shirly Zh a Manager Shenzhen enzhen Kinl Agen nlan Techn uilding A4, zhen, Guan reless Earb 36, BE1036 win Wireles bs Inc., 575 atters conce Labs Inc. is ment to the r proval applic same effect ang n Kinlan Tec lan Techno nt Auth nology Com Yinlong In ngdong, Ch buds with C 6S, BE1037 s Earbuds Boulder C o erning the c allowed to f regulatory a cation. Any t as acts of chnology Co ology Comp horizat mpany Lim dustrial P a hina Charging C 7 with Char g ourt, Pleasa certification forward all i agencies as and all acts our own. ompany Lim pany Limite tion ited ark No.292 Case ging Case anton, Califo of above na information s required a s carried ou Date: mited ed Shenshan ornia 94566 amed equip related to t nd to discu ut by MiCOM July. 29, 20 Road, 6, USA, to pment. the approva ss any M Labs on 021 al

Of fice o Federa 7435 O Columb USA Subjec t FCC ID To Wh o Pursua are req u docume Th ese d propriet might b It is our corresp docume authoriz Sinc er e Signa t u Na me: Title: M of Engineeri l Communic Oakland Mills bia, MD 210 t; Request f D: 2AE3CBE om It May C nt to the pro uesting the ents from pu documents tary informa be harmful to Schema Block D Parts Lis Operatio r understand pondence du ents and thi zation is iss ely, ure: Shirly Zha anager Shen ing Techno cations Com s Road 046 for Confiden E1036 Concern, ovisions of t Commissio ublic disclos contain det ation in ope o our comp atic Diagram iagram st onal Descri ding that all uring the ce s informatio sued. ng zhen Kinlan logy mmission ntiality the Commis on to withho sure indefin tailed syste ration of th e any and wo m ption l measurem ertification re on will be av n Technolog ssion’s rule old the follow nitely. m and equi e equipmen ould give co ment test rep eview proce vailable for gy Compan s Title 47 S wing attach pment desc nt. The publ ompetitors a ports, FCC ess cannot public revi e ny Limited Sections §0. hment(s) as criptions an ic disclosu r an unfair ad ID label for be granted ew once the Date: July. 457 and §0 confidentia d are consi re of these d vantage in mat and as confide n e grant of eq 29, 2021 0.459, we al dered as documents the market . ntial quipment .

Model Difference Declaration To Whom It May Concern, We, Shenzhen Kinlan Technology Company Limited(Twin Wireless Earbuds with Charging Case) Trademark:N/A;ModelNumber:BE1036, BE1036S, BE1037;All model’s the function, software and electric circuit are the same, only with a product color, appearance and model named different for commercial purpose. Test sample model: BE1036. Please contact me if you have any question. Name: Shirly Zhang Date: July. 29, 2021 Title: Manager Signature of applicant:

Annex A External Photos Report No.: HK2107222507‐E Page 1 of 4 Report No.: HK2107222507‐E Page 2 of 4 Report No.: HK2107222507‐E Page 3 of 4 Report No.: HK2107222507‐E Page 4 of 4

FCC ID LABEL: Label Location FCC ID: 2AE3CBE1036

Annex B Internal Photo Report No.:HK2107222507-E Page 1 of 4 Antenna Report No.:HK2107222507-E Page 2 of 4 Antenna Report No.:HK2107222507-E Page 3 of 4 Report No.:HK2107222507-E Page 4 of 4

FCC RF Exposure EUT Description: Twin Wireless Earbuds with Charging Case Model No.: BE1036 FCC ID: 2AE3CBE1036 1. Limits According to KDB 447498 D01 General RF Exposure Guidance v06 The 1‐g and 10‐g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤50 mm are determined by: [(max power of channel, including tune‐up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHz)]≤3.0 for 1‐g SAR and ≤ 7.5 for 10‐g extremity SAR, Where: Result=P/D*√F F= the RF channel transmit frequency in GHz P=Maximum turn‐up power in mw D=Min. test separation distance in mm 2. Test Result of RF Exposure Evaluation Output power （dBm） Tune Up Power （dBm） Max Tune Up power mW Min test separation distance mm Result Limit SAR Test Exclusion EDR 2.709 2±1(3) 1.995 5 0.618 3.0 Pass Note: PK Output power= conducted power. Conducted power see the test report HK2107222507-E antenna gain=4.97dBi Per KDB 447498 D01, when the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. The test exclusion threshold is 0.618 which is<= 3, SAR testing is not required. Note: Exclusion Thresholds Results=[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f (GHz)] f(GHz) is the RF channel transmit frequency in GHz Distance=5mm

Page 1 of 45 Report No.: HK2107222507-E TEST REPORT FCC PART 15 SUBPART C 15.247 Test report On Behalf of Shenzhen Kinlan Technology Company Limited For Twin Wireless Earbuds with Charging Case Model No.: BE1036, BE1036S, BE1037 FCC ID: 2AE3CBE1036 Prepared For : Shenzhen Kinlan Technology Company Limited West of 3F, Building A4, Yinlong Industrial Park No.292 Shenshan Road, Longgang District Shenzhen, Guangdong, China Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: July. 22, 2021 ~ July. 29, 2021 Date of Report: July. 29, 2021 Report Number: HK2107222507-E Page 2 of 45 Report No.: HK2107222507-E TEST RESULT CERTIFICATION Applicant’s name ................. : Shenzhen Kinlan Technology Company Limited Address ................................. : West of 3F, Building A4, Yinlong Industrial Park No.292 Shenshan Road, Longgang District Shenzhen, Guangdong, China Manufacture's Name ............ : Shenzhen Kinlan Technology Company Limited Address ................................. : West of 3F, Building A4, Yinlong Industrial Park No.292 Shenshan Road, Longgang District Shenzhen, Guangdong, China Product description Trade Mark: N/A Product name ........................... : Twin Wireless Earbuds with Charging Case Model and/or type reference : BE1036, BE1036S, BE1037 Standards ............................. : 47 CFR FCC Part 15 Subpart C 15.247 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ............................................ : Date (s) of performance of tests ............. : July. 22, 2021 ~ July. 29, 2021 Date of Issue ........................................... : July. 29, 2021 Test Result ............................................... : Pass Prepared by: Project Engineer Reviewed by: Project Supervisor Approved by: Technical Director Page 3 of 45 Report No.: HK2107222507-E Table of Contents Page 1. SUMMARY............................................................................................................................................................ 5 1.1. TEST STANDARDS ..................................................................................................................................................... 5 1.2. TEST DESCRIPTION ................................................................................................................................................... 5 1.3. TEST FACILITY ........................................................................................................................................................... 6 1.4. STATEMENT OF THE MEASUREMENT UNCERTAINTY ............................................................................................... 6 2. GENERAL INFORMATION ....................................................................................................................................... 7 2.1. ENVIRONMENTAL CONDITIONS ............................................................................................................................... 7 2.2. GENERAL DESCRIPTION OF EUT ............................................................................................................................... 7 2.3. DESCRIPTION OF TEST MODES AND TEST FREQUENCY ............................................................................................ 8 2.4. EQUIPMENTS USED DURING THE TEST .................................................................................................................... 9 2.5. RELATED SUBMITTAL(S) / GRANT (S) ...................................................................................................................... 10 2.6. MODIFICATIONS .................................................................................................................................................... 10 2.7. DESCRIPTION OF TEST SETUP ................................................................................................................................ 10 3. TEST CONDITIONS AND RESULTS ......................................................................................................................... 11 3.1. CONDUCTED EMISSIONS TEST ............................................................................................................................... 11 3.2. RADIATED EMISSIONS AND BAND EDGE ................................................................................................................ 14 3.3. MAXIMUM PEAK CONDUCTED OUTPUT POWER ................................................................................................... 25 3.4. 20DB BANDWIDTH ................................................................................................................................................ 26 3.5. FREQUENCY SEPARATION ...................................................................................................................................... 29 3.6. NUMBER OF HOPPING FREQUENCY ...................................................................................................................... 31 3.7. TIME OF OCCUPANCY (DWELL TIME) ..................................................................................................................... 33 3.8. OUT‐OF‐BAND EMISSIONS ..................................................................................................................................... 36 3.9. PSEUDORANDOM FREQUENCY HOPPING SEQUENCE ...............................................…

Text truncated - open the document above for the full version.

Radiated Emissions Conducted Emission