2AE3N-7002530Professional Rain Gauge

Weather Station Professional Rain Gauge Quickstart guide 2 / 12 1 Imprint Bresser GmbH Gutenbergstr. 2 46414 Rhede Germany http://www.bresser.de If you wish to submit a warranty claim or service request, please refer to the “Warranty” and “Service” information in this document. Please be aware that any requests or submissions sent directly to the manufacturer cannot be processed. Errors excepted. Subject to technical modifications. © 2020 Bresser GmbH All rights reserved. Reproduction of this document, including extracts, in any form (photocopied, printed etc.) or the use and distribution of this document by electronic means (image file, website etc.) is not permitted without the prior written consent of the manufacturer. The terms and brand names of the respective companies used in this document are protected by brand, patent or product law in Germany, the European Union and/or other countries. 2 Validity information This documentation is valid for the products with the article numbers listed below: 7002530 Manual version: v0620 Manual description: Quickstart_7002530_Professional-Rain-Gauge_en_BRESSER_v062020a With any service inquiries, please state these information. 3 About this Instruction Manual NOTICE This Quick Start guide is not intended to replace the more detailed user manual. Please read the safety instructions and the operating instructions carefully before use. 4 General safety instructions DANGER Risk of suffocation Improper use of this product can result in suffocation. This is particularly dangerous for children. The following safety information must be observed at all times. Keep packaging materials (plastic bags, rubber bands etc.) away from children. They can cause suffocation. This product contains small parts that could be swallowed by children. There is a risk of choking! 3 / 12 DANGER Risk of electric shock This device has electronic parts operated via a power source (power supply and/or batteries). Im- proper use of this product can cause an electric shock. An electric shock can cause serious or poten- tially fatal injuries. The following safety information must be observed at all times. Children must only use the device under adult supervision! Only use the device as described in the manual; otherwise, you run the risk of an electric shock. DANGER Risk of explosion Improper use of this product can cause an explosion. The following safety information must be ob- served at all times to prevent an explosion. Do not expose the device to high temperatures. Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into a fire! Excessive heat or improper handling could trigger a short-circuit, a fire or an explosion! NOTICE Risk of damage to property Improper handling can result in damage to the device and/or to the accessories. Always observe the following safety information when using the device. Never disassemble the device. In the event of a fault, please contact your specialist retailer. The specialist retailer will contact the service centre and send the device for repair if necessary. Do not immerse the unit in water! Do not expose the device to impacts, vibrations, dust, constant high temperatures or excessive hu- midity. This can result in malfunctions, short-circuits or damage to the batteries and components. Use only the recommended batteries. Always replace weak or empty batteries with a new, com- plete set of batteries at full capacity. Do not use batteries from different brands or with different ca- pacities. Remove the batteries from the unit if it has not been used for a long time. NOTICE Risk of voltage damage! The manufacturer is not liable for damage related to improperly installed batteries! 4 / 12 5 Parts overview Base station 1 LCD display with backlight2 Alert LED indicator 3 HISTORY button4 SINCE button (Total Rainfall) 5 RAIN button (Rainfall)6 MEM button (MAX/MIN) 7 CLOCK button8 ALARM button 9 ALERT button10 Wall mount 11 DOWN button12 UP button 13 Battery compartment14 °C/°F slide switch 15 MM/IN slide switch (mm / inch)16 RCC button 17 SCAN button18 RESET button 19 SNOOZE/LIGHT button20 Table stand A 20 1 2 3 4 5 6 19 7 10 8 9 11 12 13 14 1516 17 18 !"!#$ % &'()*!+,-(,.-/!0'.1!2'32-!'14!56+7-!+8 4-9.,-(: ! " # $ % & ' ( ) #* + # 0'4.').+1!*;.-94$ 0-4!<=>!.14.6')+( ? @+31).12!A'*-B @+31).12!69'C 0'.1!6+99-6)+(% >('.1!;+9-* D E.77.12!A36F-)G 0'.1!*-1*+( H 0=5=E!A3))+1#I J'))-(:!6+C7'()C-1) %!"!#$ !"#$%"&%'$()*$+, J'*-!*)').+1!KLMN!O.(-9-**!0'.1!2'32-!*-1*+(!KJMN!@+31).12!'66-**+(.-*!KPM L9*+!(-Q3.(-4!K1+)!.16934-4MR 5)').+1R!$!76*[email protected](+!A'))-(.-*!K#S TN!):7-!LLM 5-1*+(!B!76*[email protected](+!A'))-(.-*!K#S TN!):7-!LLM 56(-/4(.,-( 7 / 12 7 Screen display 1 SINCE icon (Total rainfall)2 HISTORY icon (History data) 3 Time4 Daylight saving time (DST) on 5 Ice pre-alert on6 Weekday 7 Alarm Mode8 Alarm on 9 Day and Month10 Rainfall indicator 11 Past time12 Histogram 13 Time range record indicator14 Current Rainfall reading 2 3 6 4 5 1 8 97 10 13 14 11 12 15 16 18 19 20 21 23 22 24 25 27 28 26 29 30 17 8 / 12 15 HI Alert16 HI Alert on 17 Rainfall unit (in/h, mm/h)18 Outdoor indicator 19 MAX/MIN indicator20 Outdoor temperature 21 Battery level indicator (sensor)22 Outdoor sensor signal strength indicator 23 HI/LO Alert and Alarm on 24 Indoor indicator 25 Indoor humidity26 MAX/MIN indicator 27 Indoor temperature28 Battery level indicator (base station) 29 HI/LO Alert for humidity and Alarm on30 HI/LO Alert for temperature and Alarm on 8 Setting up power supply Basestation 1. Remove the battery compartment cover. 2. Insert the batteries into the battery compartment. Ensure that the battery polarity (+/-) is correct. 3. Replace the battery compartment cover. 4. Wait until the indoor temperature is displayed on the base station. Remote sensor 5. Loosen the screws at the battery compartment cover with a small Philips screwdriver and remove the cover. 6. Insert the batteries into the battery compartment. Ensure that the battery p…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICE Report No.: HK20060849 Equipment Photographs (External)

䇴䇗㕌ਭ :=< ᇘᡭ 䇴䇗 ∊ׁ$Unit:mm ӝ૷㕌ਭ ᨅ䘦 BRESSER PRODUCT SIZE : 109 X 200 X 109 mm Battery: AA X 4 EMBOSS 5''$ This article is the property of CCL Electronics Ltd (CCL) and is intended to use as conceptual study, product introduction etc. Any unauthorized usage either in electronic or hard copy format will be strictly prohibited. CCL reserv es all rights to raise legal action to any illegal manipulation of this article. 䇴䇗ᰛᵕ &% F01-V0 ؤ᭯ᰛᵕ Logo Size: 36 x 6.6 mm 352*/49+8: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condition s: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2AE3N-7002530 109 mm 䇴䇗㕌ਭᇘᡭ 䇴䇗 ∊ׁ$Unit: mm ӝ૷㕌ਭ &% ᨅ䘦 BRESSER 㨨᷍᭾᷒ഴ +3(599:+>: This article is the property of CCL Electronics Ltd (CCL) and is intended to use as conceptual study, product introduction etc. Any unauthorized usage either in electronic or hard copy format will be strictly prohibited. CCL reserv es all rights to raise legal action to any illegal manipulation of this article. 5''$ :=< F01-V0 ؤ᭯ᰛᵕ INJECT COL:331626 (GRAY) SPRAY COL: NIL SILKSCREEN COL :LOGO- PMS425C(GRAY) TEXT- PMS425C(GRAY) 䇴䇗ᰛᵕ This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condition s: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2AE3N-7002530

INTERTEK TESTING SERVICE Report No.: HK20060849 Equipment Photographs (Internal) INTERTEK TESTING SERVICE Report No.: HK20060849 Equipment Photographs (Internal) INTERTEK TESTING SERVICE Report No.: HK20060849 Equipment Photographs (Internal) INTERTEK TESTING SERVICE Report No.: HK20060849 Equipment Photographs (Internal)

Analysis Report Report No.: 20060849HKG-001 The equipment under test (EUT) is the Rain Gauge (915MHz transmitter) of the weather station operating at 915MHz. The EUT is powered by 4X 1.5V size "AA" batteries. The EUT will transmit RF signal to the corresponding receiver and the receiver will display the weather information on the screen of the receiver. Antenna Type: Internal integral antenna Antenna Gain: 0dBi Range of EIRP radiated field strength: 80.2 to 90.2 dBμV/m at 3m (EIRP range -15 to -5 dBm) Frequency range: 915MHz (single channel) According to the KDB 447498: Based on the Maximum allowed field strength of production tolerance was 90.2 dBμV/m at 3m in frequency 915MHz, thus; It below calculated field strength according to minimum SAR exclusion threshold level as follows: The worst case of SAR Exclusion Threshold Level: = 3.0 * (min. test separation distance, mm) / sqrt(freq. in GHz) = 3.0 * 5 / sqrt (0.915) mW = 15.7 mW According to the KDB 412172 D01: EIRP = [(FS*D) ^2*1000 / 30] Calculated Field Strength for 15.7mW is 107.2dBuV/m @3m Since maximum field strength plus production tolerance < = 107.2dBuV/m @3m and antenna gain is > = 0.0dBi, it is concluded that maximum Conducted Power and Field Strength are well below the SAR Exclusion threshold level, so the EUT is considered to comply with SAR requirement without testing.

2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong SAR, China. Telephone: (852) 2173 8888 Facsimile: (852) 2785 5487 www.intertek.com Intertek’s standard Terms and Conditions can be obtained at our website http://www.intertek.com/terms/. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. © 2017 Intertek Page 1 of 16 TEST REPORT Report No.: 20060849HKG-001 Guangzhou Bresser Optical Instruments Co., LTD. Application For Certification (Original Grant) FCC ID: 2AE3N-7002530 Transmitter Prepared and Checked by: Approved by: Signed On File Wong Cheuk Ho, Herbert Lead Engineer Wong Kwok Yeung, Kenneth Senior Lead Engineer Date: June 22, 2020 TEST REPORT Guangzhou Bresser Optical Instruments Co., LTD. Intertek Report No: 20060849HKG-001 Page 2 of 16 GENERAL INFORMATION Grantee: Guangzhou Bresser Optical Instruments Co., LTD. Grantee Address: No.12 Kangda RD., DongCheng Zone, Yunpu Industrial District, Huangpu, Guangzhou, China. Contact Person: Agnes Huang Tel: 18218220573 Fax: 020-82253872 e-mail: N/A Manufacturer: Guangzhou Bresser Optical Instruments Co., LTD. Manufacturer Address: No.12 Kangda RD., DongCheng Zone, Yunpu Industrial District, Huangpu, Guangzhou, China. Brand Name: Bresser Model: 7002530 Additional Model: N/A Type of EUT: Transmitter Description of EUT: Professional Rain Gauge (915MHz Transmitter) Serial Number: N/A FCC ID : 2AE3N-7002530 Date of Sample Submitted: June 15, 2020 Date of Test: June 15, 2020 to June 18, 2020 Report No.: 20060849HKG-001 Report Date: June 22, 2020 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% Conclusion: Test was conducted by client submitted sample. The submitted sample as received complied with the 47 CFR Part 15 Certification. TEST REPORT Guangzhou Bresser Optical Instruments Co., LTD. Intertek Report No: 20060849HKG-001 Page 3 of 16 SUMMARY OF TEST RESULT Test Specification Reference Results Radiated Emission Radiated Emission on the Bandedge 15.249, 15.209 Pass Radiated Emission in Restricted Bands 15.205 Pass The equipment under test is found to be complying with the following standards: FCC Part 15, October 1, 2018 Edition Note: 1. The EUT uses a permanently attached antenna which, in accordance to section 15.203, is considered sufficient to comply with the pervisions of this section. 2. Pursuant to FCC part 15 Section 15.215(c), the 20 dB bandwidth of the emission was contained within the frequency band designated (mentioned as above) which the EUT operated. The effects, if any, from frequency sweeping, frequency hopping, other modulation techniques and frequency stability over excepted variations in temperature and supply voltage were considered. TEST REPORT Guangzhou Bresser Optical Instruments Co., LTD. Intertek Report No: 20060849HKG-001 Page 4 of 16 TABLE OF CONTENTS 1.0 GENERAL DESCRIPTION ................................................................................................ 5 1.1 Product Description ................................................................................................... 5 1.2 Related Submittal(s) Grants ....................................................................................... 5 1.3 Test Methodology ...................................................................................................... 5 1.4 Test Facility ................................................................................................................ 5 2.0 SYSTEM TEST CONFIGURATION ..................................................................................... 6 2.1 Justification ................................................................................................................ 6 2.2 EUT Exercising Software ............................................................................................. 6 2.3 Special Accessories .................................................................................................... 6 2.4 Measurement Uncertainty ......................................................................................... 6 2.5 Support Equipment List and Description .................................................................... 6 3.0 EMISSION RESULTS ....................................................................................................... 7 3.1 Field Strength Calculation .......................................................................................... 7 3.2 Radiated Emission Configuration Photograph ............................................................ 8 3.3 Radiated Emission Data ............................................................................................. 8 4.0 EQUIPMENT PHOTOGRAPHS ...................................................................................... 11 5.0 PRODUCT LABELLING .................................................................................................. 11 6.0 TECHNICAL SPECIFICATIONS ....................................................................................... 11 7.…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICE Report No: HK20060849 Configuration Photographs Worst-Case Radiated Emissions (Front View) INTERTEK TESTING SERVICE Report No: HK20060849 Configuration Photographs Worst-Case Radiated Emissions (Rear View)