2AE5A-TRTNRadio Module

Roost User and Technical Manual TRTN Transmitter Module User Guide Version: 1a Publication date: Jan 13, 2020 ©2020 Roost, Inc. All rights reserved. The Roost™ word mark and logo are trademarks of Roost, Inc. All other logos and trademarks are the property of their respective owners. See www.getroost.com/patents for a list of applicable patents and/or patent applications. No part of this publication may be stored, reproduced, transmitted or distributed, in whole or in part, in any manner, electronic or otherwise, whether or not for a charge or other or no consideration, without the prior written permission of Roost, Inc. Requests for permission to store, reproduce, transmit or distribute materials may be made to the following address: Roost, Inc. 1250 Borregas Avenue Sunnyvale, CA 94089 [email protected] 1) Compatibility 902-928MHz Band ONLY 2) FCC Notice to OEM This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications to this unit not expressly approved by Roost, Inc. could void the user’s authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient the Roost Device containing this TRTN Module 2. Consult getroost.com/support for help Radiation Exposure Statement: This equipment complies with the FCC radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between radiator and your body. OEM Warning: The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number – FCC ID: 2AE5A- TRTN. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: 2AE5A-TRTN.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. 3) ISEDC Notice This device complies with Innovation, Science, and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation of the device. Cet appareil est conforme à Industrie Canada une licence standard RSS exonérés (s). Son fonctionnement est soumis aux deux conditions suivantes: • Cet appareil ne doit pas provoquer d’interférences • Cet appareil doit accepter toute interference recue, y compris les interferences pouvant provoquer un functionnement indésirable de l’appareil.. Radiation Exposure Statement: This equipment complies with the IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Enonće d’exposition aux ravonnements: Cet équipment est conforme aux limites d’exposition aux rayonnements ioniques RSS-102 Pour un environnement incontrôlé. Cet équipement doit être installé et utilisé avec un Distance minimale de 20 cm entre le radiateur votre corps. OEM Warning: The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its ISEDC identification number – IC: 20891-TRTN. If the ISEDC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module IC: 20891-TRTN.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. 4) Safety Information WARNING: Do not expose this Roost TRTN transmitter module to excessive heat, direct sunlight, or fire. Do not expose to excessive humidity, rain, moisture or other liquids. Store at room temperature between 40 and 80 degrees F for best results. WARNING: Keep out of reach of children. Ingestion hazard. Harmful if swallowed. 5) Disposal Information The Roost TRTN Transmitter Module Must be Recycled or Disposed of Properly. When the Roost TRTN Transmitter…

Text truncated - open the document above for the full version.

QA-FR-172-A FCC Confidential Authorization 2019/12/31 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AE5A-TRTN In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Roost Inc. hereby requests long-term confidential treatment of information accompanying this application as outlined below: • Block Diagram • Schematics • Operation Description As well as short-term (45 days) confidential treatment of information accompanying this application as outlined below: • Internal Photos • User’s Manual • External Photos • Test Set-up Photos The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, James Machiorletti

QA-FR-175-A Modular Approval Letter (12-31-2019) FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Modular Approval Letter The Device, FCC ID: 2AE5A-TRTN, is seeking FCC authorization as a modular transmitter. The EUT meets the requirement for modular approval as detailed in FCC Public Notice DA 00-1407. Compliance to each of the requirements is described below: 1.The modular transmitter must have its own RF shielding. -Shield is affixed to PCB with clip mounts. 2. The modular transmitter must have buffered modulation/data inputs -Transmitter is fully contained and connected to Applications processor within ASIC. 3.The modular transmitter must have its own power supply regulator -Single chip ASIC contains internal regulation to allow input power supply rail of 1.8 to 3.6V operation. 4.The modular transmitter must comply with the antenna requirement of section 15.203 and 15.204(c) -Transmitter contains integrated antenna. -Test port connector is proprietary Murata connector -Test port connector is not directly accessible to the user. 5.The modular transmitter must be tested in a stand-alone configuration -TRTN module was tested on worst case maximum size standalone carrier board. 6.The modular transmitter must be labeled with its own FCC ID number -TRTN FCC ID marking is embedded in PCB TOP silk screen layer -TRTN FCC ID marking is visible outside the shield area -TRTN module is miniature size less than 0.5 square inches 7.The modular transmitter must comply with any specific rule or operating requirements and the manufacturer must provide adequate instruction along with the module to explain any such requirements QA-FR-175-A -TRTN module transmitter is not configurable by end user. -There is no direct user interface and -Transmitter module is controlled at Cloud Interface Level by Roost Cloud State Machine. 8. The modular transmitter must comply with any applicable RF exposure requirements The modular transmitter meets all RF exposure requirements. Sincerely Yours, James Machiorletti Roost, Inc 1250 Borregas Ave, Sunnyvale, CA 94089

Roost, Inc.. FCC ID: 2AE5A-TRTN; IC: 20891-TRTN EUT External Photographs 1.1 EUT – Front View 1.2 EUT– Back View Roost, Inc.. FCC ID: 2AE5A-TRTN; IC: 20891-TRTN 1.3 EUT with Support Board – Top View 1.4 EUT with Support Board – Bottom View EUT

Module Top View Label and Label Location HVIN: TRTN IC: 20891‐TRTN FCC ID: 2AE5A‐TRTN 37D

Roost, Inc.. FCC ID: 2AE5A-TRTN; IC: 20891-TRTN EUT Photographs 1.1 EUT – Front View (Without Shielded) 1.2 EUT– Back View

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA*, NIST, or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*” (Rev.2) FCC PART 15, SUBPART C ISEDC RSS-247, ISSUE 2, FEBRUARY 2017 TEST AND MEASUREMENT REPORT For ROOST, Inc. 1250 Borregas Ave., Sunnyvale, CA 94089, USA FCC ID: 2AE5A-TRTN IC: 20891-TRTN Report Type: Original Report Product Type: Radio M o d u l e Prepared By: Matthew Riego de Dios Test Technician Report Number R1906282-247 DSS Report Issue Date: 2020-02-14 Reviewed By: Simon Ma RF Lead Bay Area Compliance Laboratories Corp. 1274 Anvilwood Avenue, Sunnyvale, CA 94089, USA Tel: +1 (408) 732-9162 Fax: +1 (408) 732-9164 Roost, Inc. FCC ID: 2AE5A-TRTN; IC: 20891-TRTN Report Number: R1906282-247 DSS Page 2 of 53 FCC Part 15C/ISEDC RSS-247 Test Report TABLE OF CONTENTS 1 General Description ..................................................................................................................................................... 5 1.1 Product Description for Equipment Under Test (EUT) ...................................................................................... 5 1.2 Mechanical Description of EUT ......................................................................................................................... 5 1.3 Objective ............................................................................................................................................................. 5 1.4 Related Submittal(s)/Grant(s) ............................................................................................................................. 5 1.5 Test Methodology ............................................................................................................................................... 5 1.6 Measurement Uncertainty ................................................................................................................................... 5 1.7 Test Facility Accreditations ................................................................................................................................ 6 2 System Test Configuration.......................................................................................................................................... 8 2.1 Justification ......................................................................................................................................................... 8 2.2 EUT Exercise Software....................................................................................................................................... 8 2.3 Duty Cycle Correction Factor ............................................................................................................................. 8 2.4 Equipment Modifications.................................................................................................................................. 12 2.5 Local Support Equipment ................................................................................................................................. 12 2.6 Support Equipment ........................................................................................................................................... 12 2.7 Interface Ports and Cabling ............................................................................................................................... 13 3 Summary of Test Results ............................................................................................................................................ 14 4 FCC §15.203 & ISEDC RSS-Gen §6.8 - Antenna Requirements ............................................................................ 15 4.1 Applicable Standards ........................................................................................................................................ 15 4.2 Antenna Description ......................................................................................................................................... 15 5 FCC §2.1091, §15.247(i) & ISEDC RSS-102- RF Exposure ..................................................................................... 16 5.1 Applicable Standards ........................................................................................................................................ 16 5.2 MPE Prediction ................................................................................................................................................. 17 5.3 MPE Results ..................................................................................................................................................... 17 5.4 RF exposure evaluation exemption for IC ........................................................................................................ 17 6 FCC §15.207, §15.212 & ISEDC RSS-Gen §8.8 - AC Line Conducted Emissions ................................................. 18 6.1 Applicable Standards ........................................................................................................................................ 18 6.2 Test Setup ......................................................................................................................................................... 18 6.3 Test Procedure .................................................................................................................................................. 19 6.4 Corrected Amplitude & Margin Calculation ...................................................................................................…

Text truncated - open the document above for the full version.

Roost, Inc.. FCC ID:2AE5A-TRTN; IC:20891-TRTN Test Setup Photographs 1.1 Radiated Emission below 1 GHz Front View 1.2 Radiated Emission below 1 GHz Rear View Roost, Inc.. FCC ID:2AE5A-TRTN; IC:20891-TRTN 1.3 Radiated Emission above 1 GHz Front View 1.4 Radiated Emission above 1 GHz Rear View Roost, Inc.. FCC ID:2AE5A-TRTN; IC:20891-TRTN 1.5 AC Line – Front View 1.6 AC Line – Side View