2AEAS-BT1514Bluetooth Speaker

SPECIFICATIONS: Product Size: 2.32” (59mm) Dia. x 1.93” (49mm) H. Speaker: 1.5” (40mm) Total Output: 3 watt full-range amplifier Battery: 3.7V 250mAh Li-Polymer Rechargeable Battery Charging Time: Approx. 1.5 - 2 hours Playback Time: Approx. 2 hours at 70% volume Compatibility: Bluetooth 2.0 or above. Operation Range: Up to 30 feet (9 meters) Maximum TF Card Size: 32GB. Supported music files: mp3, wav and aac. Model No. BT1514 FCC ID: 2AEAS-BT1514 SKU# 507759 / 507760 Charge Voltage: 5V DC, 0.5A, via USB power Portable Bluetooth Speaker Made in China Printed in China FCC NOTE: BATTERY WARNINGS: CARE AND STORAGE: Store the product in a cool, dry place. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution : changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or experienced radio/TV technician for help. The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Modifications not authorized by the manufacturer may void the user’s authority to operate this device. This device contains a non-replaceable Li-Polymer battery. The battery must be recycled or disposed of properly. Contact your local waste management office for information on battery recycling or disposal. Package Content: 1 Bluetooth Speaker 1 USB charging cable 1 Instruction Manual CHARGING THE SPEAKER 1. Connect the USB charging cable (included/See Fig. A) to the Micro USB port on the speaker. 2. Turn the Power/Mode Switch to “OFF” position, plug the USB at the other end of the USB charging cable into a USB port on your computer or a USB charger. 3. The LED indicator will light up in red while charging, and the light will go out when the product is fully charged. A full charge may take approx. 1.5 to 2 hours, depending on the battery condition. 4. Unplug the USB from the USB port / USB charger once the speaker is fully charged. * DO NOT leave the speaker connected to the charger for a long time. * DO NOT leave the charging speaker unattended. PRECAUTIONS: * DO NOT disassemble or attempt to modify this speaker. * Listening at excessive sound levels can cause hearing loss. Enjoy your music at safe listening levels. * CHOKING HAZARD - This product may contain small parts! THIS IS NOT A TOY! DO NOT allow young children to play with this speaker. * Do not leave the product exposed to liquid, moisture or humidity, as it is not waterproof. * Do not use abrasive cleaning solvents to clean the product. * Do not leave the product exposed to a heat source or high temperatures. * Do not stick anything inside the speaker as this may damage internal components. Bluetooth and the Bluetooth logo are registered trademarks of Bluetooth SIG, Inc. and any use of such marks by WOW! Creations / KINGREE is under license. 2015 WOW! Creations HK Ltd. All Rights Reserved. BLUETOOTH MODE 1. PAIRING YOUR DEVICE - Turn ON the Bluetooth on your device. (Refer to your device’s user manual for details if necessary) - Make sure your device is within the operation range (30 feet) of the speaker. - Slide the Power/Mode Switch (See Fig. B) to position, the LED light will flash rapidly and the speaker will play an AUTO-PAIRING message to indicate the speaker is ready for pairing. - Once the speaker is in AUTO-PAIRING mode, look for “MINI Speaker” on your device and connect. Once the speaker is connected with your device, it will play a CONNECTED message and the LED light will stop flashing. 2. PLAY YOUR MUSIC - After the speaker is successfully paired with your device, you can activate your device as you normally do. - Sound Volume can be adjusted on your device or by turning the Multi-function button to “+/ ” or “ /-”. - Press and hold the multi-function button to “+/ ” position to turn volume up, press and hold the button to “ /-” position to turn volume down. - Press the multi-function button to “+/ ” postion once to advance to the next track, press the button to “ /-” position once to go back to the previous track. - To pause the audio, press the “ ” Play/Pause button once, press it again to resume audio playback. - Turn Power/Mode Switch to “OFF” position to preserve battery life if not in use. 3. USE IT AS A SPEAKERPHONE - When the speaker is paired with your cellphone and you have an incoming call, both the speaker and your cellphone may ring, depending on your phone settings. - To answer the incoming call with the hands-free function, simp…

Text truncated - open the document above for the full version.

WOW CREATIONS HK LTD. ON BEHALF OF GIGGLES INT'L LTD 12lF Kaiser Estate Phase 2 51 Man yue Street, Hunghom, Kowloon Ho DATE :2015-04-29 Nemko Canada lnc 303 River Road Ottawa, Ontario, Canada KMH2 Attn: Director of Certification Authoritv to Act as Aqent on our behalf, I appoint Hank.yan of Global united Technology Services co., Ltd. Room 301-309, 3th Floor, Block A, Huafeng Jinyuan Business building, No. 300 Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, China to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manuiactured, imported'oi marketed, as defined in the Federal Gommunications Commission's regulaiions will have affixed to it a label identical to that submitted for approval with this appication. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility fór complying with the terms and conditions for certification, as specified by Nemko canada lnc, stilliesides with wow CREATIONS HK LTD. oN BEHALF oF crccLES |NT'L LTD. and L2,12tF Kaiser Estate Phase 2 s1 Man yue street, Hunghom, Kowloon Hong kong Dated / this Day of 04/29/2015 Agency agreement expiration date: 04/29/2016 Joe Lau Printed On behalf of : WOW CREATIONS HK LTD. ON BEHALF OF G/GGLES INT'L LTD. Telephone: 852-35231066

WOW CREATIONS HK LTD. ON BEHALF OF GIGGLES INT'L LTD. L2, 12lF Kaiser Estate Phase 2 51 Man Yue Street, Hunqhom, Kowloon Honq Kono 2015-04-29 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC lD: 2AEAS-8T1514 Product Name: Bluetooth Speaker Reo uest for Gonfidentialitv Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confldential: . Schematics . Block diagram . OperationalDescription These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmfulto the company and provide unjustifìed beneflts to our competitors. Dated this By: 04/29/2015 Joe Lau Printed WOW CREATIONS HK LTD. ON BEHALF OF G/GGLES INT'L LTD, 852-35231066 On behalf of : Telephone:

MODEL : BT1514 FCC ID : 2AEAS-BT1514 MADE IN CHINA

FCC ID: 2AEAS-BT1514 According to 447498 D01 General RF Exposure Guidance v05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where --f(GHz) is the RF channel transmit frequency in GHz --Power and distance are rounded to the nearest mW and mm before calculation --The result is rounded to one decimal place for comparison eirp = pt x gt = (EXd) 2 /30 where: pt = transmitter output power in watts, gt = numeric gain of the transmitting antenna (unitless), E = electric field strength in V/m, --- 10 ((dBuV/m)/20) /10 6 d = measurement distance in meters (m) ---3m So pt = (EXd) 2 /30 x gt Field strength = 96.98dBuV/m @3m Ant gain =1dBi, so Ant numeric gain= 1.26 So pt={ [10 (96.98) /10 6 x 3] 2 /30x1.26 }x1000 mW = 1.189mW So (1.189 mW /5mm)x √2.48 = 0.374<3 Then SAR evaluation is not required

Global United Technology Services Co., Ltd. Report No.: GTSE15040053201 Authorized Signature: Robinson Lo Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the GTS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of GTS or testing done by GTS in connection with, distribution or use of the product described in this report must be approved by GTS in writing. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. FCC REPORT Applicant: WOW CREATIONS HK LTD. ON BEHALF OF GIGGLES INT'L LTD. Address of Applicant: L2, 12/F Kaiser Estate Phase 2 51 Man Yue Street, Hunghom, Kowloon Hong Kong Equipment Under Test (EUT) Product Name: Bluetooth Speaker Model No.: BT1514 FCC ID: 2AEAS-BT1514 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.249:2014 Date of sample receipt: April 22, 2015 Date of Test: April 22-29, 2015 Date of report issued: April 29, 2015 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTSE15040053201 Global United Technology Services Co., Ltd. Project No.: GTSE150400532RF Room 301-309, 3th Floor, Block A, Huafeng Jinyuan Business Building, No. 300 Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 29 2 Version Version No. Date Description 00 April 29, 2015 Original Prepared By: Date: April 29, 2015 Project Engineer Check By: Date: April 29, 2015 Reviewer Report No.: GTSE15040053201 Global United Technology Services Co., Ltd. Project No.: GTSE150400532RF Room 301-309, 3th Floor, Block A, Huafeng Jinyuan Business Building, No. 300 Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 29 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 CLIENT INFORMATION ......................................................................................................................... 5 5.2 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.3 TEST MODE ........................................................................................................................................ 7 5.4 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 7 5.5 TEST FACILITY .................................................................................................................................... 7 5.6 TEST LOCATION ................................................................................................................................. 7 5.7 OTHER INFORMATION REQUESTED BY THE CUSTOMER ......................................................................... 7 6 TEST INSTRUMENTS LIST ..................................................................................................................... 8 7 TEST RESULTS AND MEASUREMENT DATA ...................................................................................... 9 7.1 ANTENNA REQUIREMENT ..................................................................................................................... 9 7.2 CONDUCTED EMISSIONS ................................................................................................................... 10 7.3 RADIATED EMISSION METHOD ........................................................................................................... 13 7.3.1 Field Strength of The Fundamental Signal ................................................................................ 15 7.3.2 Spurious emissions .................................................................................................................... 16 7.3.3 Bandedge emissions.................................................................................................................. 20 7.4 20DB OCCUPY BANDWIDTH .............................................................................................................. 21 8 TEST SETUP PHOTO ............................................................................................................................ 23 9 EUT CONSTRUCTIONAL DETAILS .....................................................................................................…

Text truncated - open the document above for the full version.

Radiated Emission Conducted Emission