2AEHV902235902235

GALAXY GROW AMP Installation/Operating Instructions READ THESE INSTRUCTIONS BEFORE FIRING UP YOUR BALLAST WARRANTY This unit, when properly used will provide you with years of service. It is covered under a 3 year warranty (902210 - 400 Watt and 902230 - 1500W/240V have a 2 Year Warranty). This warranty will be voided if the unit is misused, abused or altered. Warranty repair or replacement will be at the sole discretion of the manufacturer. Defective units need to be returned to the place of purchase with proof of purchase/receipt. This warranty is expressly in lieu of all other warranties, expressed or implied, including the warranties of merchantability and fitness for use and of all other obligations or liabilities on the part of the seller. This warranty shall not apply to this product or any part thereof which has been damaged by accident, abuse, misuse, modification, negligence, alteration or misapplication. Manufacturer makes no warranty whatsoever in respect to accessories or parts not supplied by manufacturer. This warranty shall apply only to the United States, including Alaska, Hawaii and territories of the United States and Canada. RETURNING UNITS Please contact your retail store for returns. ® Galaxy Grow Amp Models: 902210 - 400 WATT 902215 - 600 WATT 902235 - 750 WATT 902220 - 1000 WATT 902225 - 1000 WATT/240V 902230 - 1500 WATT/240V 902227 - 1000 WATT/277V KEEP ORIGINAL PACKAGING— all returns need to be in the original packaging in order to avoid product damage during shipping. Any damage to products not in their original packaging will not be covered under warranty. SAFETY FIRST! Failure to observe the following safety warnings may result in serious injury. In addition, failure to observe these safety warnings will result in a waiver of all liabilities and will void all warranties. WARNING  If the exterior of the lamp is damaged, replace lamp immediately.  When re-lamping, make sure lamp has time to cool before touching.  Make sure power cord and lamp cord are connected properly.  Disconnect power before re-lamping.  DO NOT hang by power or lamp cord.  DO NOT make contact with the interior of the socket while power is on.  DO NOT operate light systems in wet locations.  DO NOT plug system into supply voltage other than what is designated on ballast.  DO NOT attempt to rewire or reconfigure your system, it will void warranty and could cause serious safety hazards (i.e. power cord, lamp cord, lamp socket or ballast).  Keep away from children. Part 18 complianceThis device complies with Part 18 of the FCC Rules. Advisory statement This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30 MHz. The interference potential of the device or system The interference potential of the device or system is the operating frequency; 65 kHz. Maintenance of the systemUnplug the unit, wait 30 seconds, and plug the unit back in. Simple measures that can be taken by the user to correct interference Move the unit away from any radio device.  This product contains delicate electronic components. This means that if it is placed near an object that transmits radio signals, it could cause interference. This could be, for example, mobile telephones, walkie talkies, CB radios, remote controls and microwaves. If interference occurs, move such objects away from the appliance. Galaxy Grow Amp Select-A-Watt 600/750/1000/Turbo Charge 120/240 Volt: FCC#: 2AEHV902220 Galaxy Grow Amp Select-A-Watt 400/600/1000/Turbo Charge 240 Volt Only: FCC#: 2AEHV902225 Galaxy Grow Amp Select-A-Watt 600/750/Turbo Charge 120/240 Volt: FCC#: 2AEHV902235 See back page for important FCC and warranty information SAFETY FIRST!  DO NOT alter or modify this unit in any way. It may cause bodily injury or death as this is a high power electrical device.  DO NOT submerse in water or splash water on the unit.  DO NOT plug or unplug the lamp cord while the ballast is energized. These high performance Electronic Ballasts are extremely efficient. They have a high power factor and high luminous efficacy. It’s stable performance creates constant power output even when power fluctuates (power surge). Short circuit protection technology prevents damage to the lamp and other ballasts connected to the same circuit. 1. INSTALLATION PROCEDURE  DO NOT alter or modify the electronic ballast in any way. Not only may it damage the unit, it will void the warranty.  Lamp power rating must match electronic ballast power rating. 3. NOTES  The Galaxy Electronic Ballasts will operate with Metal Halide lamps and High Pressure Sodium lamps that are rated at the proper wattage.  This unit offers short-circuit and power fluctuation. 2. SPECIFICATIONS  120-240 Volts (#902225 & 902230 are 240V only and #902227 is 277V only)  Power source frequency: 50/60Hz  Power Factor (cosø): > 0.99  Ambient Temp: 50 ̊F to 120 ̊F  Crest Factor: < 1.5  Acoustic Resonance: none  Total Harmonic Distortion: (THD): < 10.0% These ballasts offer our exclusive Smart Volt ® feature – They are “smart” ballasts — They will operate on either 120 or 240 volt power (except Galaxy ® 1000 & 1500 watt 240 volt only ballast and 1000 watt 277 volt only ballast) by simply plugging in the appropriate power cord. There is no further modification necessary. It comes with a 120 volt power cord. If you wish to run this ballast on 240 volt, you must purchase the 240 volt power cord separately (part #903082 six foot or #903084 twenty foot). The Galaxy 1000 watt 240 volt (#902225) and the Galaxy 1500 watt 240 volt (#902230), are designated voltage electronic ballasts. Run these ballasts only with 240 volts. Connect “Sun System ® ” lamp cord with male plug to female receptacle on ballast OUTPUT TO HPS/MH LAMPCONNECT APPROPRIATE AC POWER PLUG HERE AC input 120 (included) or 240V (purchase separately) (#902225 & #902230 include …

Text truncated - open the document above for the full version.

Sunlight Supply, Inc Page 1 Cover Letter for FCC Application FCC ID: 2AEHV902235 Date: 05/19/2015 Sunlight Supply requests certification under FCC Part 18 for our consumer RF lighting device with FCC ID number 2AEHV902235. This contains the 120/240V Model 902235. These are all listed under Class B Residential requirements and tested under NWEMC Test Report # SNSY0033. The radio frequency for each model is identical and was tested under all the same requirements. It utilized a 1000W High Pressure Sodium Lamp in a Single Ended Reflector with a 15 foot lamp cord. Sincerely, Bruce LeBlanc Compliance Manager

Confidentiality Letter-FCC Date: 5/19/2015 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern, We hereby respectfully request that under the provision of 47 CFR 0.459 and 0.457(d) the documents listed below and attached with this application for certification be provided with confidential status.  Schematics.pdf  Operational Description.pdf  Frequency Block Diagrams.pdf  Internal Photos o Long term Confidentiality due to the circuit board is covered in epoxy and not accessible by the users. Any exhibit / information for which we have requested confidentiality, but which may not be accorded such treatment by the FCC, should be returned to us. The documents listed above contain trade secrets that are treated as confidential by us. Substantial competitive harm to us could result should they be made available to the public. Sincerely, Bruce LeBlanc Compliance Manager

LOCATION OF FCC ID LABEL 902235 Galaxy Grow Amp 750W

This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government of the United States of America. This Report may only be duplicated in its entirety Sunlight Supply, Inc. Galaxy Grow Amp 902235 Report # SNSY0033 NVLAP Lab Code: 200630-0 CERTIFICATE OF TEST 2014-12-10 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. Last Date of Test: March 19, 2015 Sunlight Supply, Inc. Model: Galaxy Grow Amp 902235 Emissions Standards Specification Method FCC 18.305:2015 RF Lighting: Consumer equipment MP-5:1986 FCC 18.307:2015 RF Lighting: Consumer equipment MP-5:1986 Results Test Description Applied Results Comments Radiated Emissions Yes Pass Conducted Emissions Yes Pass Deviations From Test Standards None Approved By: Kyle Holgate, Operations Manager Report No. SNSY00332/15 REVISION HISTORY REV 2014.10.14 Revision Number Description Date Page Number 00 None Report No. SNSY00333/15 ACCREDITATIONS AND AUTHORIZATIONS REV 2015.2.19 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Accredited by A2LA to ISO / IEC 17065 as a product certifier. This allows Northwest EMC to certify transmitters to FCC and IC specifications. NVLAP - Each laboratory is accredited by NVLAP to ISO 17025 Canada IC - Recognized by Industry Canada as a Certification Body (CB). Certification chambers and Open Area Test Sites are filed with IC. European Union European Commission – Validated by the European Commission as a Conformity Assessment Body (CAB) under the EMC directive and as a Notified Body under the R&TTE Directive. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIP / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFCA – Recognized by OFCA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: http://www.nwemc.com/accreditations/ http://gsi.nist.gov/global/docs/cabs/designations.html Report No. SNSY00334/15 EMISSIONS MEASUREMENTS REV 2014.10.08 Measurement Uncertainty When a measurement is made, the result will be different from the true or theoretically correct value. The difference is the result of tolerances in the measurement system that cannot be completely eliminated. To the extent that technology allows us, it has been our aim to minimize this error. Measurement uncertainty is a statistical expression of measurement error qualified by a probability distribution. A measurement uncertainty estimation has been performed for each test per our internal quality document WP 342. The estimation is used to compare the measured result with its "true" or theoretically correct value. The expanded measurement uncertainty (K=2) can be found included as part of the applicable test description page. Our measurement data meets or exceeds the measurement uncertainty requirements of the applicable specification; therefore, the test data can be compared directly to the specification limit to determine compliance. The calculations for estimating measurement uncertainty are based upon ETSI TR 100 028 (or CISPR 16-4-2 as applicable), and are available upon request. Measurement Bandwidths Frequency Range (MHz) Peak Data (kHz) Quasi-Peak Data (kHz) Average Data (kHz) 0.01 - 0.15 1.0 0.2 0.2 0.15 - 30.0 10.0 9.0 9.0 30.0 - 1000 100.0 120.0 120.0 Above 1000 1000.0 N/A 1000.0 Measurements were made using the bandwidths and detectors specified. No video filter was used. Sample Calculations Radiated Emissions: Field Strength Measured Level Antenna Factor Cable Factor Amplifier Gain Distance Adjustment Factor External Attenuation 33.5 = 42.6 + 28.6 + 3.1 - 40.8 + 0.0 + 0.0 Conducted Emissions: Adjusted Level Measured Level Transducer Factor Cable Factor External Attenuation 47.1 = 26.7 + 0.3 + 0.1 + 20.0 Report No. SNSY00335/15 FACILITIES REV 2015.2.19 California Labs OC01-13 41 Tesla Irvine, CA 92618 (949) 861-8918 Minnesota Labs MN01-08, MN10 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612)-638-5136 New York Labs NY01-04 4939 Jordan Rd. Elbridge, NY 13060 (315) 554-8214 Oregon Labs EV01-12 22975 NW Evergreen Pkwy Hillsboro, OR 97124 (503) 844-4066 Texas Labs TX01-09 3801 E Plano Pkwy Plano, TX 75074 (469) 304-5255 Washington Labs NC01-05 19201 120 th Ave NE Bothell, WA 9801 (425)984-6600 NVLAP NVLAP Lab Code: 200676-0 NVLAP Lab Code: 200881-0 NVLAP Lab Code: 200761-0 NVLAP Lab Code: 200630-0 NVLAP Lab Code:201049-0 NVLAP Lab Code: 200629-0 Industry Canada 2834B-1, 2834B-3 2834E-1 N/A 2834D-1, 2834D-2 2834G-1 2834F-1 BSMI SL2-IN-E-1154R SL2-IN-E-1152R N/A SL2-IN-E-1017 SL2-IN-E-1158R SL2-IN-E-1153R VCCI A-0029 A-0109 N/A A-0108 A-0201 A-0110 Recognized Phase I CAB for ACMA, BSMI, IDA, KCC/RRA, MIC, MOC, NCC, OFCA US0158 US0175 N/A US0017 US0191 US0157 Report No. SNSY00336/15 PRODUCT DESCRIPTION 2014-12-10 Client and Equipment Under Test (EUT) Information Company Name: Sunlight Supply, Inc. Address: 5408 NE 88th Street BLDG A, Suite 101 City, State, Zip: Vancouver, WA 98665 Test Requested By: Ken…

Text truncated - open the document above for the full version.

RADIATED EMISSIONS WTD.2015.02.25 PSA-ESCI 2015.03.03, EmiR5 2014.11.19.2 RADIATED EMISSIONS WTD.2015.02.25 PSA-ESCI 2015.03.03, EmiR5 2014.11.19.2 CONDUCTED EMISSIONS WTD.2015.02.25 PSA-ESCI 2015.03.03, EmiR5 2015.03.19.1 CONDUCTED EMISSIONS WTD.2015.02.25 PSA-ESCI 2015.03.03, EmiR5 2015.03.19.1