2AEIM-WC5Wireless Phone Charger

Document ID: User Manual WC5 Wireless Phone Charger Product Description （WC5） Version: Record: Date: Prepare： A1 Initial Release 21.03.2023 Hua Jiang Document ID: User Manual WC5 Page 2 of 8 Content 1 Product Introduction ....................................................................................... 3 1.1 Product Introduction .......................................................................... 3 1.2 Mechanical Design .............................................................................. 4 1.2.1 Product 3D View ................................................. 4 1.2.2 Product 3D Exploded View ........................................ 4 1.2.3 Dimension 2D View ............................................... 5 1.3 Product Technial Parameters ............................................................. 6 2 Safety Instructions ........................................................................................... 6 Document ID: User Manual WC5 Page 3 of 8 1 Product Introduction 1.1 Product Introduction Chart 1-1 Logic Diagram Chart 1-2 Charging Location View The wireless phone charger can charge your Qi-enabled smartphone at up to 15W of power. Just simply place your smartphone on the charger. The wireless phone charger supports up to two phones at once, charging side by side. NOTE: The wireless charger may not work if your phone case is metal. Take the phone out of the case and place the phone on the charger. 13.5V Document ID: User Manual WC5 Page 4 of 8 1.2 Mechanical Design 1.2.1 Product 3D View Chart 1-3 3D view 1.2.2 Product 3D Exploded View Chart 1-4 3D Exploded View Document ID: User Manual WC5 Page 5 of 8 1.2.3 Dimension 2D View Chart 1-5 2D View Document ID: User Manual WC5 Page 6 of 8 1.3 Product Technial Parameters Electrical Specification Parameters: Range: Output Power Max. Output 15W*2 Temperature Range Operating Temperature -40°C~85°C Storage Temperature -40°C~105°C Input Parameter Voltage/Current 13.5V @ 4A Charging Efficiency Rx Output Power VS Tx Input Power Coil Center:>70% Charging operating Frequency / 122.72~132.72kHz NFC operating Frequency / 13.56MHz Chart 1-6 technical parameters 2 Safety Instructions Before using and operating the equipment, please read and observe the following precautions. This product meets the technical standards of short distance micro power class an equipment and relevant specifications. It is not allowed to disassemble the equipment, change the internal structure, antenna, etc. to avoid danger. In places where the use of wireless devices is prohibited according to laws and regulations, such as in-flight, medical and other places, please comply with the relevant regulations and requirements, stop using or turn off the devices. The use of micro power equipment in relevant electromagnetic environmental protection areas shall comply with the requirements of electromagnetic environmental protection and relevant industry authorities. The radio waves generated by devices may affect implantable medical devices, such as pacemakers, cochlear implants, hearing aids, etc. When using the wireless charging device, please keep a distance of at least 30 cm from the implanted medical device. Document ID: User Manual WC5 Page 7 of 8 This product has passed the Qi certification of WPC, and can charge the products that also pass the certification of WPC. Please don't charge the wireless charging equipment that doesn’t meet the requirements of Qi, and don’t use unauthorized or incompatible power supply, charger, battery, etc. to power the equipment, which may cause fire or other hazards. FCC IC statement This device complies with Part 15 of the FCC Rules and Industry Canada's license- exempt RSS Standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference. And (2) This device must accept any Interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. ·If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Document ID: User Manual WC5 Page 8 of 8 This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20cm de distance entre la source de rayonnement et votre corp…

Text truncated - open the document above for the full version.

Covered Equipment Certification Attestation Letter DATE 4/17/2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2AEIM-WC5 Tesla, Inc (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Tesla, Inc (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Cindy Li Title: Certification Engineer Company Name: Tesla, Inc Date: 4/17/2023

* the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter DATE 4/17/2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2AEIM-WC5 Per section 2.911(d)(7) of the FCC rules, Tesla, Inc (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. Designated agent* for service of process: Company Name: Tesla, Inc Physical U.S. Company Address: 3500 Deer Creek Road, Palo Alto, 94304 California, United State Agent name: Cindy li Agent Email Address: [email protected] The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Designated Agent Signed: (Required, if different to Applicant): Signed: Signed: Printed name: Cindy Li Printed name: Cindy Li Title: Certification Engineer Title: Click here to enter text. Company Name: Tesla, Inc Company Name: Tesla, Inc Date: 4/17/2023 Date: 4/17/2023

4/17/2023 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: 2AEIM-WC5 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules and FCC Guidance document 726920, we hereby request confidential treatment of information accompanying this application as outlined below: PERMANENT LONG-TERM CONFIDENTIALITY: Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation SHORT TERM CONFIDENTIALITY FOR A PERIOD OF 180 DAYS (Note: for the X number of days, you can list up to 180 days, but should not go past the date you start product marketing/sale): Internal Photos External Photos User Manual Test Set-up Photographs When the device is marketed before the requested number of days listed above, the grantee will inform the TCB to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. The above information contains trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Sincerely, Signed: Printed name: Cindy Li Title: Certification Engineer

[Type here] 4/17/2023 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 AUTHORITY TO ACT AS AGENT - FCC On our behalf, I appoint DEKRA Testing and Certification (Suzhou) Co., Ltd. Addr: No. 99 Hongye Rd., Suzhou Industrial Park, Suzhou, Jiangsu Province, 215006 People’s Republic of China, to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in FCC regulations will have affixed to it a label identical to that submitted for approval with this application. In signing this letter, Applicant certifies that neither the applicant nor any party to the application is not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko North America Inc., still resides still resides with us. Sincerely, Printed name: Cindy Li

Tesla, Inc. 3500 Deer Creek Road, Palo Alto, CA 94304 p +650 681 5100 f +650 681 5101 Federal Communications Commission Office of Engineering & Technology Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Via Electronic Filing Date: April 28, 2021 Re: Authorized Personnel for Grantee Code 2AEIM To Whom It May Concern: I currently serve as Tesla, Inc’s (Tesla) grantee contact (Grantee Code 2AEIM) for Federal Communications Commission (FCC) equipment authorizations. As prescribed in KDB 852134 Authorized Policy Form 731, I authorize the following personnel to act on Tesla’s behalf with regard to all matters that relate to FCC equipment authorization (i.e., signing Form 731, attestation letters, and confidentiality request letters). These individuals also are authorized to assign additional persons to act on Tesla’s behalf as authorized agents. Authorized Personnel: • Peng Zhang • Cindy Li This authorization is valid until further written notice from any of Tesla’s authorized grantee contacts. Sincerely Yours, Sean Lui Sr. Staff Charging Compliance Engineer 3500 Deer Creek Road, Palo Alto, California US 94304 Phone: (650)681-5109 [email protected]

Declaration of Differences We, Tesla, Inc , here declare that, The color of the NFC PCB which used for certification testing is black, the color will change to green for mass production. It is the same product, only PCB color change, and the rest are the same, no function and performance change. Company name: Tesla, Inc Signature: Date: 4/19/2023

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2330084R-RF-External Photo Page 1 / 6 External Photographs (1) EUT Photo (2) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2330084R-RF-External Photo Page 2 / 6 (3) EUT Photo (4) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2330084R-RF-External Photo Page 3 / 6 (5) EUT Photo (6) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2330084R-RF-External Photo Page 4 / 6 (7) EUT Photo (8) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2330084R-RF-External Photo Page 5 / 6 (9) EUT Photo (10) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2330084R-RF-External Photo Page 6 / 6 (11) EUT Photo (12) EUT Photo

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2330084R-RF-Internal Photo Page 1 / 6 Internal Photographs (1) EUT Photo (2) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2330084R-RF-Internal Photo Page 2 / 6 (3) EUT Photo (4) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2330084R-RF-Internal Photo Page 3 / 6 (5) EUT Photo (6) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2330084R-RF-Internal Photo Page 4 / 6 (7) EUT Photo (8) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2330084R-RF-Internal Photo Page 5 / 6 (9) EUT Photo (10) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2330084R-RF-Internal Photo Page 6 / 6 (7) EUT Photo

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Designation Number: CN1199 Test report No: 2330084R-RF-US-P20V01 FCC Exposure TEST REPORT Product Name Wireless Phone Charger Trademark Tesla Model and /or type reference WC5 FCC ID 2AEIM-WC5 Applicant ́s name / address Tesla, Inc 3500 Deer Creek Road, Palo Alto, 94304 California, United State Test method requested, standard FCC Part 2.1091 Verdict Summary IN COMPLIANCE Documented by (name / position & signature) Feng Jiao/ Project Engineer Approved by (name / position & signature) Jack Zhang/ Manager Date of issue 2023-04-26 Report Version V1.1 Report template No Template_FCC MPE-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Designation Number: CN1199 Report no.: 2330084R-RF-US-P20V01 Page 2 / 19 INDEX page Competences and Guarantees ............................................................................................................................. 3 General conditions ............................................................................................................................................... 3 Environmental conditions ..................................................................................................................................... 3 Possible test case verdicts ................................................................................................................................... 4 Abbreviations ....................................................................................................................................................... 4 Document History ................................................................................................................................................ 5 Remarks and Comments ..................................................................................................................................... 5 1. General Information .................................................................................................................................... 6 1.1. EUT Description .......................................................................................................................................... 6 1.2. Antenna information .................................................................................................................................... 7 1.3. Mode of Operation ...................................................................................................................................... 8 1.4. Tested System Details ................................................................................................................................ 9 1.5. Configuration of Tested System ................................................................................................................ 10 1.6. EUT Exercise Software ............................................................................................................................. 11 2. Technical Test .......................................................................................................................................... 12 2.1. Test Environment ...................................................................................................................................... 12 3. Electric Field Strength / Magnetic Field Strength........................................................................................ 13 3.1. Test Equipment ......................................................................................................................................... 13 3.2. Test Setup ................................................................................................................................................ 14 3.3. Limit .......................................................................................................................................................... 15 3.4. Test Procedure ......................................................................................................................................... 16 3.5. Uncertainty ............................................................................................................................................... 16 3.6. Test Result ............................................................................................................................................... 17 4. RF Exposure Evaluation ............................................................................................................................ 19 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Designation Number: CN1199 Report no.: 2330084R-RF-US-P20V01 Page 3 / 19 COMPETENCES AND GUARANTEES DEKRA is a testing laboratory competent to carry out the tests described in this report. In order to assure the traceability to other national and international laboratories, DEKRA has a calibration and maintenance program for its measurement equipment. DEKRA guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated in the report and it is based on the knowledge and technical facilities available at DEKRA at the time of performance of the test. DEKRA is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this documen…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 2330084R-RF-US-P06V02 FCC&IC TEST REPORT Product Name Wireless Phone Charger Trademark Tesla Model and /or type reference WC5 FCC ID 2AEIM-WC5 IC 20098-WC5 Applicant’s name / address Tesla, Inc 3500 Deer Creek Road, Palo Alto, 94304 California, United State Test method requested, standard CFR 47, Part 15 C RSS-210 Issue 10 (2019-12) Verdict Summary IN COMPLIANCE Documented by (name / position & signature) Feng Jiao/ Project Engineer Approved by (name / position & signature) Jack Zhang/ Manager Date of issue 2023-04-21 Report Version V1.0 Report template No Template_FCC 15.225-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2330084R-RF-US-P06V02 Page 2 / 36 INDEX page Competences and Guarantees ............................................................................................................................. 4 General conditions ............................................................................................................................................... 4 Environmental conditions ..................................................................................................................................... 4 Possible test case verdicts ................................................................................................................................... 5 Abbreviations ....................................................................................................................................................... 5 Document History ................................................................................................................................................ 6 Remarks and Comments ..................................................................................................................................... 6 Used Equipment .................................................................................................................................................. 7 Uncertainty .......................................................................................................................................................... 8 1 General Information .................................................................................................................................... 9 1.1 General Description of the Item(s) ..................................................................................................... 9 1.2. Antenna information .................................................................................................................................. 10 2 Description of Test Setup .......................................................................................................................... 11 2.1 Operating mode(s) used for tests .................................................................................................... 11 2.2 Support / Auxiliary equipment / unit / Test software for the EUT ....................................................... 11 2.3 Test Configuration / Block diagram used for tests ............................................................................ 12 2.4 Testing process ............................................................................................................................... 13 3 Verdict summary section ........................................................................................................................... 14 3.1 Standards ....................................................................................................................................... 14 3.2 Overview of results .......................................................................................................................... 14 3.3 Test Facility ..................................................................................................................................... 15 4 Test Results .............................................................................................................................................. 16 4.1 AC Power Line Conducted Emission ............................................................................................... 16 4.1.1 Limit ...................................................................................................................................... 16 4.1.2 Test Setup ............................................................................................................................. 16 4.1.3 Test Procedure ...................................................................................................................... 16 4.1.4 Test Data .............................................................................................................................. 17 4.2 E-field Emission .............................................................................................................................. 18 4.2.1 Limit ...................................................................................................................................... 18 4.2.2 Test Setup ............................................................................................................................. 18 4.2.3 Test Procedure ...................................................................................................................... 18 4.2.4 Test Data .............................................................................................................................. 19 4.3 Radiated Emissions.............................................................................................................…

Text truncated - open the document above for the full version.

无线充电Coil天线规格书 1、天线参数： Item Specification Operating Frequency(MHz) 0.1277 Operating temperature -40°C～+105°C Storage temperature -40°C～+125°C Modulation FSK Brand Luxshare Antenna Type/Model MP-A27 Manufacture Luxshare-ICT Address THE intersection Between Xiyuan Road and Xigu Road,Songshuping village,Liujiaoting Sub- district,Enshi city,Hubei province, China 2、天线照片： NFC天线规格书 1、天线参数： Item Specification Operating Frequency(MHz) 13.56 Operating temperature -40°C～+85°C Storage temperature -40°C～+105°C Modulation FSK Brand Luxshare Antenna Type/Model WPC032 antenna Manufacture Kinwong Address Chengxi Industrial Park Jishui County Ji’an City Jiangxi Province,P.R.China 2、天线照片：

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2330084R-RF-US-Test Photo Page 1 / 3 ISED Test Photographs Description: Radiated emission(Below 30MHz) Description: Radiated emission(Above 30MHz) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2330084R-RF-US-Test Photo Page 2 / 3 Description: RF Exposure Setup –3kHz~100kHz Description: RF Exposure Setup –Above 100kHz DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2330084R-RF-US-Test Photo Page 3 / 3 Description: RF Exposure Setup –Test Probe 1Hz ~ 400kHz Description: RF Exposure Setup –Test Probe 100kHz ~ 3GHz