2AEJ4R22208Remote Unit

MP_PS MID POWER Digital Radios 37dBm per Band MP_PS User Manual Remote Unit Model No: PS-R22208 Mid POWER Digital Radio © Sunwave MP_PS_User Manual | 2 of 46 Contact us today: www.sunwave.com [email protected] Revision History Revision Number Revision Date Summary of Changes Author 1.0.0 28 th June 2020 Draft WANG XIAN Copyright © 2020 Sunwave All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission from Sunwave. All copyright, confidential information, patents, design rights, and all other intellectual property rights of whatsoever nature contained herein are and shall remain the sole and exclusive property of Sunwave. The information furnished herein is believed to be accurate and reliable. However, no responsibility is assumed by Sunwave for its use or any infringements of patents or other rights of third parties resulting from its use. The Sunwave and CrossFire names and logos are trademarks or registered trademarks of Sunwave. All other trademarks are the property of their respective owners. Mid POWER Digital Radio © Sunwave MP_PS_User Manual | 3 of 46 Contact us today: www.sunwave.com [email protected] Content Preface .................................................................................................................................................................................... 5 Warnings ............................................................................................................................................................................. 5 Site Considerations ............................................................................................................................................................. 6 Environmental Considerations ............................................................................................................................................ 6 Warning Marks .................................................................................................................................................................... 7 Installation Preparation .......................................................................................................................................................... 8 Unpacking and Inspecting ................................................................................................................................................... 8 Inspecting the Packing Container ................................................................................................................................... 8 Unpacking the Device ..................................................................................................................................................... 8 Verifying the Contents .................................................................................................................................................... 9 Inspecting the Device ...................................................................................................................................................... 9 Installation Preparation ...................................................................................................................................................... 9 Site Investigation ............................................................................................................................................................. 9 Installation Tools ........................................................................................................................................................... 10 Torque Settings ............................................................................................................................................................. 10 Clearance....................................................................................................................................................................... 10 Installing the Access Unit (AU) .............................................................................................................................................. 11 Accessories List ................................................................................................................................................................. 12 Rack Installation ................................................................................................................................................................ 12 Wall Installation ................................................................................................................................................................ 18 AU Mounting Dimension Spacing ..................................................................................................................................... 21 RF Connection ................................................................................................................................................................... 22 Installing the Remote Unit (MP_PS) ..................................................................................................................................... 23 MP_PS Accessories............................................................................................................................................................ 23 Wall Installation (Back on the Wall) .................................................................................................................................. 24 Wall Installation (Side on the Wall) .................................................................................................................................. 31 MP_PS Wall Mounting D…

Text truncated - open the document above for the full version.

Corning Restricted Sunwave Communications Co., Ltd To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Sunwave Communications Co., Ltd. 581 Houju Avenue, Binjiang District, Hangzhou, China For FCC ID: 2AEJ4R22208; Model number: PS-R222 According to: FCC KDB 935210 D02 Signal Boosters Certification v04r02 For PART 90 booster device, Section V (g) requirement: (g) Attestation (must be non-confidential exhibit, signed by the applicant; signature by test lab, agent, or TCB is not acceptable) should include: (1) Warning label messages and Class B disclosure will be also shown in online and point-of-sale marketing materials and on outside packaging of device: We Sunwave Communications Co., Ltd. declared our Warning label messages and Class B disclosure will be also shown in online and point-of-sale marketing materials and on outside packaging of device. WARNING: This is a part 90 class B signal booster device. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. You MUST register Class B signal boosters (as defined in 47 CFR 90.219) online at www.fcc.gov/signal-boosters/registration. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Sincerely, Name (Printed): Ren Ailin Title: Manager Signature: Title: Sunwave Communications Co., Ltd On behalf of Company: 581 Huoju Avenue,Binjiang District Hangzhou China © 2020 Corning Incorporated. All Rights Reserved.

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Sunwave Communications Co., Ltd Address 581 Huoju Avenue,Binjiang District Hangzhou China Grantee Code 2AEJ4 FCC ID 2AEJ4R22208 Authorized Contact Name Ren Ailin Contact Email [email protected] Contact Phone +86-571-86704493 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Sunwave Communications Co., Ltd (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sunwave Communications Co., Ltd (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date:2024/7/24 Print Name: Ren Ailin Title: Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Sunwave Communications Co., Ltd Date: 2024-07-24 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AEJ4R22208 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Sunwave Communications Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Ren Ailin Title: Manager Signature: On behalf of Company: Sunwave Communications Co., Ltd Telephone: +86-571-86704493

Sunwave Communications Co., Ltd To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Sunwave Communications Co., Ltd 581 Huoju Avenue,Binjiang District Hangzhou China Regarding: Confidentiality Request regarding application for FCC ID: 2AEJ4R22208 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions BOM Tune up The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Ren Ailin Title: Manager Company Name: Sunwave Communications Co., Ltd

Compliance Certification Services (Kunshan) Inc. Page: 1 of 4 Appendix Photographs of External photo for KSCR2405000970AT Test Model No.: PS-R222 Compliance Certification Services (Kunshan) Inc. Page: 2 of 4 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Page: 3 of 4 Compliance Certification Services (Kunshan) Inc. Page: 4 of 4

Serial: PS-R2220308 XXXXXXXXXX MFG Date: DD-MM-YYYY XXXXXXXXXXXXXX CAN ICES(A)/NMB-3(A) FCC ID : 2AEJ4R22208 Integrated Distributed Antenna System Remote Unit MP-PS-OD-ACModel: PS-R222 Input: 100-240V~ 3A 50/60Hz 801501 WARNING! This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS . You MUST have an FCC LICENSE or express consent of an FCC License to operate this device. You MUST register Part 90 Class Bsignal Boosters (as defined in 47 CFR 90.219) online at www.fcc.gov/signal-boosters /registration. Unauthorized use may result in significant forfeiture penalties, includingpenalties in excess of $100,000 for each continuing violation. Part90 and Part 20 Signal Booster THIS IS A 90.219 CLASS B DEVICE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and(2) this device must accept anyinterference received, includinginterference that may cause undesired operation. Serial: PS-R2220308 XXXXXXXXXX MFG Date: DD-MM-YYYY XXXXXXXXXXXXXX WARNING: This is NOT a CONSUMER device. It is designed for installation byan installer approved by an ISED licensee. You MUST have an ISED LICENCE or the express consent of anISED licensee to operate this device. CAN ICES(A)/NMB-3(A) IC : 22834-R22208 HVIN : PS-R22208 Integrated Distributed Antenna SystemAccess Unit MP-PS-OD-AC Model: PS-R222 Input: 100-240V~ 3A 50/60Hz 801501 Manufacturer: Sunwave Communications Co., Ltd. Address: 581,Huoju Avenue, Binjiang District, Hangzhou,P.R.China,310053 Manufacturer: Sunwave Communications Co., Ltd. Address: 581,Huoju Avenue, Binjiang District, Hangzhou,P.R.China,310053

Compliance Certification Services (Kunshan) Inc. Page: 1 of 6 Appendix Photographs of Internal photo for KSCR2405000970AT Test Model No.: PS-R222 Compliance Certification Services (Kunshan) Inc. Page: 2 of 6 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Page: 3 of 6 Compliance Certification Services (Kunshan) Inc. Page: 4 of 6 Compliance Certification Services (Kunshan) Inc. Page: 5 of 6 Compliance Certification Services (Kunshan) Inc. Page: 6 of 6

Compliance Certification Services (Kunshan) Inc. CCSEM-TRF-001 Rev. 02 Sep 01, 2023 Report No.: KSCR240500097003 Page: 1 of 7 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Member of the SGS Group (SGS SA) 1 Cover Page RF MPE REPORT Application No.: KSCR2405000970AT FCC ID: 2AEJ4R22208 Applicant: Sunwave Communications Co., Ltd. Address of Applicant: 581 Houju Avenue, Binjiang District, Hangzhou, China Manufacturer: Sunwave Communications Co., Ltd. Address of Manufacturer: 581 Houju Avenue, Binjiang District, Hangzhou, China Factory: Sunwave Communications Co., Ltd. Address of Factory: 581 Houju Avenue, Binjiang District, Hangzhou, China Equipment Under Test (EUT): EUT Name: Remote Unit Model No.: PS-R222 Trade mark: CROSSFIRE Standard(s) : FCC Rules 47 CFR §2.1091 KDB447498 D01 General RF Exposure Guidance v06 Date of Receipt: 2024-05-30 Date of Test: 2024-06-26 to 2024-08-13 Date of Issue: 2024-08-13 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. CCSEM-TRF-001 Rev. 02 Sep 01, 2023 Report No.: KSCR240500097003 Page: 2 of 7 Revision Record Version Description Date Remark 00 Original 2024-08-13 / Authorized for issue by: Tested By Damon Zhou /Project Engineer Approved By Terry Hou /Reviewer Compliance Certification Services (Kunshan) Inc. CCSEM-TRF-001 Rev. 02 Sep 01, 2023 Report No.: KSCR240500097003 Page: 3 of 7 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 General Description of E.U.T. ............................................................................................................ 4 3.2 Technical Specifications ..................................................................................................................... 4 3.3 Test Location ...................................................................................................................................... 5 3.4 Test Facility ........................................................................................................................................ 5 4 Test Standards and Limits ....................................................................................................................... 6 4.1 FCC Radiofrequency radiation exposure limits: ................................................................................. 6 5 Measurement and Calculation ................................................................................................................. 7 5.1 Maximum transmit power ................................................................................................................... 7 5.2 MPE Calculation ................................................................................................................................. 7 Compliance Certification Services (Kunshan) Inc. CCSEM-TRF-001 Rev. 02 Sep 01, 2023 Report No.: KSCR240500097003 Page: 4 of 7 3 General Information 3.1 General Description of E.U.T. Power Supply: AC :100-240V~ 3A 50/60Hz DC: -48VDC 6.5A 3.2 Technical Specifications Frequency Band: 851MHz to 862MHz 862MHz to 869MHz Antenna Type: External Antenna Gain: 0 dBi for 851MHz to 862MHz (Provided by manufacturer) 0 dBi for 862MHz to 869MHz (Provided by manufacturer) Modulation Type: TETRA/P25/DMR/CQPSK/FM MIMO: SISO Temperature Range: -40°C to 55°C Note: The antenna gain value is provided by the customer. The test lab will not be responsible for wrong test result due to incorrect information about antenna gain values. Compliance Certification Services (Kunshan) Inc. CCSEM-TRF-001 Rev. 02 Sep 01, 2023 Report No.: KSCR240500097003 Page: 5 of 7 3.3 Test Location All tests were performed at: Compliance Certification Services (Kunshan) Inc. No.10 Weiye Rd, Innovation park, Eco&Tec, Development Zone, Kunshan City, Jiangsu, China. Tel: +86 512 5735 5888 Fax: +86 512 5737 0818 No tests were sub-contracted. Note: 1.SGS is not responsible for wrong test results due to incorrect information (e.g., max. internal working frequency, antenna gain, cable loss, etc) is provided by the applicant. (If applicable). 2.SGS is not responsible for the authenticity, integrity and the validity of the conclusion based on results of the data provided by applicant. (If applicable). 3. Sample source: sent by customer. 3…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Page: 1 of 25 Appendix A for KSCR240500097001 1. Out of band rejection Downlink:851MHz to 862MHz 2. Input/output power and amplifier/booster gain Mode Operation Band Frequency F0 (MHz) Signal Type Signal Level (dBm) Input Power (dBm) Output Power (dBm) ERP (dBm) Gain (dB) Down link 851~ 862MHz 856.594 CW Pre-AGC -9.83 40.05 37.90 49.88 3dB Above AGC -6.84 40.47 38.32 / Remark: 1) The normal power is 40dBm and the measured output power which show in above table is within±2.0dB tolerance. 2) ERP(dBm)=Total Output Power(dBm)+Antenna Gain(dBi)-2.15dB.Antenna Gain is 0.0dBi. Compliance Certification Services (Kunshan) Inc. Page: 2 of 25 3 Input-versus-output signal comparison Occupied Bandwidth Channel Spacing (KHz) Test Frequency F0(MHz) Signal Level Signal Type 99%Occupied Channel Bandwidth (KHz) 6.25KHz (CQPSK) 856.594 Pre-AGC Input 4.885 856.594 Output 4.885 856.594 3dB Above AGC Input 4.885 856.594 Output 4.886 12.5KHz (FM) 856.594 Pre-AGC Input 9.774 856.594 Output 9.774 856.594 3dB Above AGC Input 9.773 856.594 Output 9.775 25KHz (TETRA) 856.594 Pre-AGC Input 20.984 856.594 Output 20.978 856.594 3dB Above AGC Input 20.978 856.594 Output 20.985 6.25KHz CQPSK Pre-AGC_Input Pre-AGC_Output 3dB Above Pre-AGC_Input 3dB Above Pre-AGC_Output Compliance Certification Services (Kunshan) Inc. Page: 3 of 25 12.5KHz FM Pre-AGC_Input Pre-AGC_Output 3dB Above Pre-AGC_Input 3dB Above Pre-AGC_Output Compliance Certification Services (Kunshan) Inc. Page: 4 of 25 25KHz TETRA Pre-AGC_Input Pre-AGC_Output 3dB Above Pre-AGC_Input 3dB Above Pre-AGC_Output Compliance Certification Services (Kunshan) Inc. Page: 5 of 25 Emission masks Channel Spacing (KHz) Channel Signal Level Signal Type Result 6.25KHz (CQPSK) Low Pre-AGC Input Pass Output Pass 3dB Above AGC Input Pass Output Pass Middle Pre-AGC Input Pass Output Pass 3dB Above AGC Input Pass Output Pass High Pre-AGC Input Pass Output Pass 3dB Above AGC Input Pass Output Pass 12.5KHz (FM) Low Pre-AGC Input Pass Output Pass 3dB Above AGC Input Pass Output Pass Middle Pre-AGC Input Pass Output Pass 3dB Above AGC Input Pass Output Pass High Pre-AGC Input Pass Output Pass 3dB Above AGC Input Pass Output Pass 25KHz (TETRA) Low Pre-AGC Input Pass Output Pass 3dB Above AGC Input Pass Output Pass Middle Pre-AGC Input Pass Output Pass 3dB Above AGC Input Pass Output Pass High Pre-AGC Input Pass Output Pass 3dB Above AGC Input Pass Output Pass Compliance Certification Services (Kunshan) Inc. Page: 6 of 25 6.25KHz CQPSK-Low Pre-AGC_Input Pre-AGC_Output 3dB Above Pre-AGC_Input 3dB Above Pre-AGC_Output Compliance Certification Services (Kunshan) Inc. Page: 7 of 25 6.25KHz CQPSK-Middle Pre-AGC_Input Pre-AGC_Output 3dB Above Pre-AGC_Input 3dB Above Pre-AGC_Output Compliance Certification Services (Kunshan) Inc. Page: 8 of 25 6.25KHz CQPSK-High Pre-AGC_Input Pre-AGC_Output 3dB Above Pre-AGC_Input 3dB Above Pre-AGC_Output Compliance Certification Services (Kunshan) Inc. Page: 9 of 25 12.5KHz FM-Low Pre-AGC_Input Pre-AGC_Output 3dB Above Pre-AGC_Input 3dB Above Pre-AGC_Output Compliance Certification Services (Kunshan) Inc. Page: 10 of 25 12.5KHz FM-Middle Pre-AGC_Input Pre-AGC_Output 3dB Above Pre-AGC_Input 3dB Above Pre-AGC_Output Compliance Certification Services (Kunshan) Inc. Page: 11 of 25 12.5KHz FM-High Pre-AGC_Input Pre-AGC_Output 3dB Above Pre-AGC_Input 3dB Above Pre-AGC_Output Compliance Certification Services (Kunshan) Inc. Page: 12 of 25 25KHz TETRA-Low Pre-AGC_Input Pre-AGC_Output 3dB Above Pre-AGC_Input 3dB Above Pre-AGC_Output Compliance Certification Services (Kunshan) Inc. Page: 13 of 25 25KHz TETRA-Middle Pre-AGC_Input Pre-AGC_Output 3dB Above Pre-AGC_Input 3dB Above Pre-AGC_Output Compliance Certification Services (Kunshan) Inc. Page: 14 of 25 25KHz TETRA-High Pre-AGC_Input Pre-AGC_Output 3dB Above Pre-AGC_Input 3dB Above Pre-AGC_Output Compliance Certification Services (Kunshan) Inc. Page: 15 of 25 4. out of Band/out of block (including intermodulation) Channel Spacing (KHz) Signal Level Worst Test Level (dBm) Limit (dBm) Result 6.25KHz Pre-AGC -16.856 -13 Pass 3dB Above AGC -16.764 -13 Pass 12.5KHz Pre-AGC -16.995 -13 Pass 3dB Above AGC -16.853 -13 Pass 25KHz Pre-AGC -16.879 -13 Pass 3dB Above AGC -16.899 -13 Pass Channel Spacing: 6.25KHz Pre-AGC 3dB Above AGC Channel Spacing: 12.5KHz Pre-AGC 3dB Above AGC Compliance Certification Services (Kunshan) Inc. Page: 16 of 25 Channel Spacing: 25KHz Pre-AGC 3dB Above AGC Compliance Certification Services (Kunshan) Inc. Page: 17 of 25 5. Conducted Spurious Emissions Channel Frequency Range (MHz) Worst Test Level (dBm) Limit (dBm) Over Limit (dB) Result LCH 0.009~0.15 -21.37 -13.00 -8.37 Pass 0.15~10 -35.38 -13.00 -22.38 Pass 10~30 -41.12 -13.00 -28.12 Pass 30~1000 -30.03 -13.00 -17.03 Pass 1000~10000 -22.28 -13.00 -9.28 Pass MCH 0.009~0.15 -22.68 -13.00 -9.68 Pass 0.15~10 -36.19 -13.00 -23.19 Pass 10~30 -41.85 -13.00 -28.85 Pass 30~1000 -30.51 -13.00 -17.51 Pass 1000~10000 -22.83 -13.00 -9.83 Pass HCH 0.009~0.15 -22.53 -13.00 -9.53 Pass 0.15~10 -35.07 -13.00 -22.07 Pass 10 - 30 -41.20 -13.00 -28.20 Pass 30 - 1000 -29.93 -13.00 -16.93 Pass 1000 - 10000 -23.64 -13.00 -10.64 Pass Compliance Certification Services (Kunshan) Inc. Page: 18 of 25 LCH 9KHz-150KHz 15KHz-10MHz 10MHz-30MHz 30MHz-1000MHz 1000MHz-6000MHz Compliance Certification Services (Kunshan) Inc. Page: 19 of 25 MCH 9KHz-150KHz 15KHz-10MHz 10MHz-30MHz 30MHz-1000MHz 1000MHz-6000MHz Compliance Certification Services (Kunshan) Inc. Page: 20 of 25 HCH 9KHz-150KHz 150KHz-10MHz 10MHz-30MHz 30MHz-1000MHz 1000MHz-6000MHz Compliance Certification Services (Kunshan) Inc. Page: 21 of 25 6. Radiated Spurious Emissions 851MHz-862MHz-Low Channel Frequency Spurious Emission Limit Over Limit Verdict Polarization and Level MHz Polarization dBm dBm dB 99.42 Horizontal -56.52 -13 -43.52 Pass 318.25 Horizontal -51.37 -13 -38.37 Pass 871.71 Horizontal -53.73 -13 -40.73 Pass 2685.99 Horizontal -45.35 -13 -32.35 Pass 5110.93 Horiz…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. CCSEM-TRF-001 Rev. 02 Sep 01, 2023 Report No.: KSCR240500097001 Page: 1 of 30 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Member of the SGS Group (SGS SA) TEST REPORT Application No.: KSCR2405000970AT FCC ID: 2AEJ4R22208 Applicant: Sunwave Communications Co., Ltd. Address of Applicant: 581 Houju Avenue, Binjiang District, Hangzhou, China Manufacturer: Sunwave Communications Co., Ltd. Address of Manufacturer: 581 Houju Avenue, Binjiang District, Hang…

Text truncated - open the document above for the full version.