2AEJA-ATLASMobile Phone

FCC Wa rnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This device was tested for typical body-worn operations with the back of the device kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a appropriate separation distance between the user's body and the back of the device. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Use only the supplied or an approved antenna. 1 Contents Safety ................................................................................................................ 3 Environment .................................................................................................... 4 1 Getting Started .............................................................................................. 5 1.1 Getting to know your touch phone................................................... 5 1.2 Installing the SIM card and storage card .......................................... 5 1.3 Charging the Battery ....................................................................... 6 1.4 Starting up the device ...................................................................... 6 1.5 Status Icons ..................................................................................... 9 2 Using phone features .................................................................................. 10 2.1 Turning the phone function on and off ........................................... 10 2.2 Making a call ................................................................................ 11 2.3 Answering and Ending a call ......................................................... 11 2.4 In-call options ............................................................................... 11 2.5 Using call history .......................................................................... 12 2.6 Call settings .................................................................................. 12 3 Setting on your device................................................................................. 12 4 ActiveSync ................................................................................................... 15 5 Contacts....................................................................................................... 17 6 Exchanging Messages ................................................................................. 19 7 Internet ........................................................................................................ 23 7.1 Ways of Connecting to the Internet ................................................ 23 7.2 Browser ......................................................................................... 24 8 Experiencing Multimedia ........................................................................... 25 8.1 Camera & Picture .......................................................................... 25 8.2 Music ............................................................................................ 27 8.3 FM Radio ...................................................................................... 30 9 Other applications ...................................................................................... 30 9.1 Calendar ........................................................................................ 30 2 9.2 Alarm Clock .................................................................................. 31 9.3 Calculator ...................................................................................... 32 3 Safety Never attempt to disassemble your phone. You alone are responsible for how you use your phone and any consequences of its use. As a general rule, always switch off your phone wherever the use of a phone is prohibited. Use of your phone is subject to safety measures designed to …

Text truncated - open the document above for the full version.

GSM GLOBE.COM INC 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: GSM GLOBE.COM INC Address: 10286 SW 22nd pl. Davie Florida United States 33324 Product Name: Mobile Phone FCC ID: 2AEJA-AT L A S Model(s): Rayo Atlas 2.911(d)(5)(i) Equipment Type We, [GSM GLOBE.COM INC ] (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Zubair Panjwani Date: 2023-0 6-01 Title and Company name: Manager NOTE 1 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

GSM GLOBE.COM INC 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: GSM GLOBE.COM INC Address: 10286 SW 22nd pl. Davie Florida United States 33324 Product Name: Mobile Phone FCC ID: 2AEJA-AT L A S Model(s): Rayo Atlas 2.911(d)(5)(ii) Applicant filing We, [GSM GLOBE.COM INC ] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Zubair Panjwani Date: 2023-06-01 Title and Company name: Manager NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

GSM GLOBE.COM INC 2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: GSM GLOBE.COM INC Address: 10286 SW 22nd pl. Davie Florida United States 33324 Product Name: Mobile Phone FCC ID: 2AEJA-AT L A S Model(s): Rayo Atlas 2.911(d)(7) USA Designated Agent for Service of Process We, [GSM GLOBE.COM INC ] (“the applicant”) designate [GSM GLOBE.COM INC ] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: GSM GLOBE.COM INC Address: 10286 SW 22nd pl. Davie Florida United States 33324 FRN: 0024494924 Contact Name: Zubair Panjwani Telephone No: (305) 283-9498 Email: [email protected] Applicant Company name: GSM GLOBE.COM INC Address: 10286 SW 22nd pl. Davie Florida United States 33324 FCC Grantee Code: 2AEJA Contact Name: Zubair Panjwani Telephone No: (305) 283-9498 Email: [email protected] Signature: Title: Manager Signature: Title: Manager Date: 2023-06-01 Date: 2023-06-01 GSM GLOBE.COM INC 2.911 (d)(7)USA Agent v1.2 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-t o-the-communications-supply-chain-through-the

GSM GLOBE.COM INC Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-06-01 Subject; Request for Long Term Confidentiality FCC ID: 2AEJA-ATLAS To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description Tune-up Procedurer software security requirement It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Zubair Panjwani Title: Manager

Letter of Authorization Company: GSM GLOBE.COM INC Address: 10286 SW 22nd pl. Davie Florida United States 33324 Product Name: Mobile Phone Model Number: Rayo Atlas FCC Identifier: 2AEJA-ATLAS We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Zubair Panjwani Date: 2023-06-01 Title: Manager

Test Report Number: BTF230526R00401 External Test Report Number: BTF230526R00401 Test Report Number: BTF230526R00401

Label & Location Mobile Phone Model: Rayo Atlas FCC ID: 2AEJA-ATLAS

Test Report Number: BTF230526R00401 Internal Test Report Number: BTF230526R00401 Test Report Number: BTF230526R00401 Test Report Number: BTF230526R00401 Test Report Number: BTF230526R00401

TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 1 of 156 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China SARTestReport For ApplicantName:GSMGLOBE.COMINC Address:10286SW22ndpl.DavieFloridaUnitedStates33324 EUTName:MobilePhone ModelNumber:RayoAtlas BrandName:RayoMovil IssuedBy CompanyName:BTFTestingLab(Shenzhen)Co.,Ltd. Address: F101,201and301,Building1,Block2,TantouIndustrialPark, TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, China ReportNumber:BTF230526R00301 TestStandards: FCC47CFR§2.1093IEEE1528-2013IEEEC95.1-2019 KDB447498D01v06KDB447498D04v01 KDB865664D01v01r04KDB865664D02v01r02 KDB941225D01v03r01KDB941225D05v02r05 KDB248227D01v02r02KDB941225D06v02r01 KDB648474D04v01r03KDB690783D01v01r03 FCCID:2AEJA-ATLAS TestConclusion:Pass TestDate:2023-06-05to2023-06-07 DateofIssue:2023-06-08 PreparedBy: MonicaZhou/ProjectEngineer Date:2023-06-08 ApprovedBy: Ryan.CJ/EMCManager Date:2023-06-08 Note:Allthetestresultsinthisreportonlyrelatedtothetestingsamples.Whichcanbeduplicatedcompletelyforthelegalusewithapprovalof applicant;itshallnotbereproducedexceptinfullwithoutthewrittenapprovalofBTFTestingLab(Shenzhen)Co.,Ltd.,Alltheobjectionsshouldbe raisedwithinthirtydaysfromthedateofissue.Tovalidatethereport,youcancontactus. TestReportNumber:BTF230526R00301 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 2 of 156 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China RevisionHistory VersionIssueDateRevisionsContent R_V02023-06-08Original Note:Oncetherevisionhasbeenmade,thenpreviousversionsreportsareinvalid. TestReportNumber:BTF230526R00301 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 3 of 156 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China TableofContents 1.Introduction .........................................................................................................................................................................................................................4 1.1IdentificationofTestingLaboratory......................................................................................................................................................................4 1.2IdentificationoftheResponsibleTestingLocation............................................................................................................................................4 1.3LaboratoryCondition..............................................................................................................................................................................................4 1.4Announcement........................................................................................................................................................................................................4 2.ProductInformation ...........................................................................................................................................................................................................5 2.1ApplicationInformation...........................................................................................................................................................................................5 2.2ManufacturerInformation .......................................................................................................................................................................................5 2.3FactoryInformation.................................................................................................................................................................................................5 2.4GeneralDescriptionofEquipmentunderTest(EUT).......................................................................................................................................5 2.5EquipmentunderTestAncillaryEquipment .......................................................................................................................................................5 2.6TechnicalInformation .............................................................................................................................................................................................5 3.SummaryofTestResults .................................................................................................................................................................................................7 3.1TestStandards........................................................................................................................................................................................................7 3.2DeviceCategoryandSARLimit ...........................................................................................................................................................................7 3.3TestResultSummary .............................................................................................................................................................................................8 3.4TestUncertainty ......................................................................................................................................................................................................9 4.MeasurementSystem.....................................................................................................................................................................................................11 4.1SpecificAbsorptionRate(SAR)Definition...............................................................…

Text truncated - open the document above for the full version.

深圳市昱晟通讯设备有限公司 1 / 14 深圳市卓信特通信科技有限公司 天线承认书封面 APPROVAL SHEET 产品描述 天线供应商名称 Vendor: 深圳市昱晟通讯设备有限公司 卓信特机型名称 Description: Z6509 天线规格名称及编码： BOX 喇叭组件： 分集天线： 三合一天线： 附件： Attachments ■ 样品 Sample ■ 规格书 Spec  可靠性测试报告 Reliability Report ■ 工程图面 Drawing  重点尺寸报告 FAI Report  材质证明书 Material Verification Sheet ■ 包装方式 Packing Content  安规报告 Safety Report 供应商签核 Vendor 拟制： Design 袁淑君 审核： Check 陈柯鸿 批准： Approval: 曾祥好 技术确认栏 Technology Check 结 构 ： Mechanical 工业/包材设计： ID 硬件： Hardware 项目经理： Project Manager 研发质量签核 □ 承 认 □ 拒绝承认 PM approval Approved Reject □ 条件承认 需满足条件： _ Condition Approved □临时承认 限量采购 Pcs 研发质量： Temporary Approved Design Quality 分发部门： Distribute □ 供应商 □ 研发 □ 质量 □ 文控 □ 工程 □ 客户 □外协厂 □ 其 他 深圳市昱晟通讯设备有限公司 2 / 14 Z6509 项目天线物料需求规格书 客户名称： 深圳市卓信特通讯科技有限公司 客户品名： Z6509 产品名称： 天线 喇叭组 件；分集天线 ；三合一天线 变更内容履历： 序号 版本 状态 生效日期 责任人 页码 备注 1 R:A 初版 2023-05 -30 袁淑君 14 2 供方承认签字： 责任人/日期 IQC/日期 审核/日期 核准/日期 MD 冯继武 钟秋鸿 RF 需方承认签字（认签后请寄回）： 需方判定结果： □合格 □不合格 开发设计工程师/日期 SQE 工程师/日期 采购负责人/日期 开发部经理批准/日期 深圳市昱晟通讯设备有限公司 3 / 14 1. 概述 1.1 适用范围 本要求规定了 Z6509 产品的天线技术要求和物料需求规范。 本要求适用于 Z6509 天线选型、测试和验收。 1.2 项目基础信息 天线名称： Z6509 天线频率： GSM850/900/1800/1900 WCDMA B2/4/5 LTE B2/4/5/7/13/25/26/66/71 GWB： 1575.42MHz/2.450GHz DRX：824MHz-2700MHz 天线材质： 天线喇叭组件/FPC 天线 天线版本： V0.1 2. 技术指标要求 2.1 测试项目及设备介绍 清单 测试项目 设备 有源测试 TRP,TIS 综合测试仪、微波暗室 2.2 有源报告 2.2.1 测试说明 测试工具：Agilent8960综测仪、R&SCMW500、全电波远场ETS暗室，高精度定位系统及其控制器和带 自动测试程序的电脑 测试环境: 温度22°C±3°C，湿度50%±15% 测试方法：DUT以H面放于转台中心位置固定，与喇叭天线中心位置在同一个水平线上。 定位系统使DUT 在整个球面进行旋转，满足高精度的三维定位。各射频仪器、转台控制器与带自动测 试软件的PC 通过GPIB 接口进行通信。 深圳市昱晟通讯设备有限公司 2.2.2 天线有源参数 4/ 14 深圳市昱晟通讯设备有限公司 2.2.3 天线有源参数 5 / 14 深圳市昱晟通讯设备有限公司 2.2.4 GPS 测试 6 / 14 2.2.5 开关逻辑 深圳市昱晟通讯设备有限公司 5 / 14 2.2.6 BT/WiFi/5G WiFi 7 / 14 深圳市昱晟通讯设备有限公司 8 / 14 2.3 天线环境处理及改善 深圳市昱晟通讯设备有限公司 9 / 14 2.4 小板匹配 2.5 天线增益 深圳市昱晟通讯设备有限公司 10 / 14 3. 工程图纸 天线喇叭组件 深圳市昱晟通讯设备有限公司 11 / 14 三合一天线 深圳市昱晟通讯设备有限公司 12 / 14 分集天线 深圳市昱晟通讯设备有限公司 13 / 14 4. 物料清单 深圳市昱晟通讯设备有限公司 14 / 14 5. 包装图 包装方式图 产品名称 天线组件 项目型号 Z6509 装箱明细 纸 箱 尺 寸 1: 35*25*24.5cm 纸箱尺寸 2： 根据订单数量/体积而定 装箱方式 按订单数量包装 装箱总数 按订单数量包装 标签要求 标签尺寸 1： 通用 100*100mm 标签尺寸 2： 根据客户要求 注意事项 1.因订单数量限制，每款物料的装箱方式根据订单总数量或者实物体积选择箱子大小 2.保存温度：常温 3.保存条件：贮藏在阴凉干燥处

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 68 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Test Report For Applicant Name: GSM GLOBE.COM INC Address: 10286 SW 22nd pl. Davie Florida United States 33324 EUT Name: Mobile Phone Brand Name: Rayo Movil Model Number: Rayo Atlas Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF230526R00402 Test Standards: 47 CFR Part 15.247 Test Conclusion: Pass FCC ID: 2AEJA-ATLAS Test Date: 2023-05-26 to 2023-06-08 Date of Issue: 2023-06-09 Prepared By: elma.yang / Project Engineer Date: 2023-06-09 Approved By: Ryan.CJ / EMC Manager Date: 2023-06-09 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF230526R00402 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 68 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-06-09 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF230526R00402 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 68 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1 INTRODUCTION...................................................................................................................................... 5 1.1 Identification of Testing Laboratory ............................................................................................ 5 1.2 Identification of the Responsible Testing Location ................................................................... 5 1.3 Announcement ............................................................................................................................. 5 2 PRODUCT INFORMATION...................................................................................................................... 6 2.1 Application Information ............................................................................................................... 6 2.2 Manufacturer Information ............................................................................................................ 6 2.3 Factory Information ..................................................................................................................... 6 2.4 General Description of Equipment under Test (EUT) ................................................................ 6 2.5 Technical Information .................................................................................................................. 6 3 SUMMARY OF TEST RESULTS.............................................................................................................. 7 3.1 Test Standards ............................................................................................................................. 7 3.2 Uncertainty of Test ....................................................................................................................... 7 3.3 Summary of Test Result .............................................................................................................. 7 4 TEST CONFIGURATION ......................................................................................................................... 8 4.1 Test Equipment List ..................................................................................................................... 8 4.2 Test Auxiliary Equipment ........................................................................................................... 12 4.3 Test Modes ................................................................................................................................. 12 5 EVALUATION RESULTS (EVALUATION) ............................................................................................. 13 5.1 Antenna requirement ................................................................................................................. 13 6 RADIO SPECTRUM MATTER TEST RESULTS (RF) ............................................................................ 13 6.1 Conducted Emission at AC power line ..................................................................................... 13 6.1.1 E.U.T. Operation: .............................................................................................................. 13 6.1.2 Test Setup Diagram: ......................................................................................................... 13 6.1.3 Test Data: ......................................................................................................................... 15 6.2 Occupied Bandwidth.................................................................................................................. 17 6.2.1 E.U.T. Operation: .............................................................................................................. 17 6.2.2 Test Setup Diagram: ............................................................…

Text truncated - open the document above for the full version.

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 89 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Test Report For Applicant Name: GSM GLOBE.COM INC Address: 10286 SW 22nd pl. Davie Florida United States 33324 EUT Name: Mobile Phone Brand Name: Rayo Movil Model Number: Rayo Atlas Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF230526R00403 Test Standards: 47 CFR Part 15.247 Test Conclusion: Pass FCC ID: 2AEJA-ATLAS Test Date: 2023-05-26 to 2023-06-08 Date of Issue: 2023-06-09 Prepared By: elma.yang / Project Engineer Date: 2023-06-09 Approved By: Ryan.CJ / EMC Manager Date: 2023-06-09 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF230526R00403 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 89 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-06-09 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF230526R00403 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 89 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1 INTRODUCTION...................................................................................................................................... 5 1.1 Identification of Testing Laboratory ............................................................................................ 5 1.2 Identification of the Responsible Testing Location ..................................…

Text truncated - open the document above for the full version.