2AEZAWT001Cloud Smart Thermometer

CLOUD SMART THERMOMETER USER MANUAL 【 【【 【Product Name】 】】 】 Cloud Smart Thermometer 【 【【 【Model】 】】 】 WT001 Series 【 【【 【Specifications】 】】 】 1. 1.1. 1. Measuring Measuring Measuring Measuring S SS Specifications pecificationspecifications pecifications (1) Range：25.0°C～40.0°C (2) Accuracy：±0.1°C at 36.0～40.0°C, ±0.2°C at other temperature range (3) Unit：°C or °F 2. 2.2. 2. Battery BatteryBattery Battery Button battery CR2025 3. 3.3. 3. Operation Operation Operation Operation Distance DistanceDistance Distance Fifteen meters in a barrier-free environment 4. 4.4. 4. M MM Mechanical echanicalechanical echanical S SS Specifications pecificationspecifications pecifications (1)Weight：6.0g (2)Dimension：49.5*35.0*6.5mm 5. 5.5. 5. IP Rating IP RatingIP Rating IP Rating IPx6: Support washing 6. 6.6. 6. Operation Specifications Operation SpecificationsOperation Specifications Operation Specifications 1、 Working current：0.65mA 2、 Working voltage：3V 7. 7.7. 7. Operation Condit Operation ConditOperation Condit Operation Conditions ionsions ions The temperature of the operation environment should be 0°C～+ 50°C, the humidity should be 15%～85%(non-condensing) and barometric pressure should be 860hPa～ 1060hPa,and avoiding long-term operation at high temperature, humid or direct sunlight environment. 【 【【 【Operation Principle】 】】 】 Firstly, the thermistor which is at top of the measuring part works as a temperature transmitter. Secondly, while the target temperature changes, the value of the thermistor will change with it. Meanwhile, Bluetooth chip will calibrate and deal with the value of the circuit thermistor, the Bluetooth chip will transmit the temperature data and changing curve to mobile device for display through Bluetooth connection. 【 【【 【Main Structure】 】】 】 The Smart Thermometer is mainly composed of a host, temperature probe, battery and medical stickers (while temperature probe is composed of a sensor ring and a sensor). Product composition is as follow: 【 【【 【Accessories】 】】 】 Bottom shell Sensor ring + Sensor NTC plate Battery cover Surface shell Button PCB Two battery shrapnel NTC Battery CR2025 1. Parts 【 【【 【Instructions of Accessories, Consumables Replacement Cycle and Method】 】】 】 (1)Medical stickers*10, Decals*1, after running out of the accessories, please purchase the accessories at our online store. Detailed installation guidance please refer to ‘Wearing description’. (2)For CR2025 button battery, when the device shows low battery capacity, please replace the battery according to the manual operation guidelines. Detailed installation guidelines please refer to ‘Upload Battery’. 【 【【 【Features FeaturesFeatures Features】 】】 】
Support 24 hours continuously monitoring of temperature change (data measured every 4 seconds), shown as temperature curve drawing.
With high accuracy, auto high temperature alert, prompt actions on health risks, easy for you to work and sleep without worries.
Perfect waterproof design.
Small and easy to use, with only 6.5mm of thickness
Low power consumption Bluetooth wireless transmission. With iOS or Android App for smart temperature measuring.
Specialized App design for parents, easy to use.
Data storage by cloud service, continue saving human temperature data(Remote monitor function after registration and log-in)
Smart power supply management with low power-consumption, auto turn off when lower than human temperature
History data saved long as 24days, while data exceeds this time be saved to cloud.
Support platforms of iOS 6.0 or above, Android 4.3 or above, support devices including smart phones, Pads, TVs
Auto alert through voice and message when real-time temperature exceeds the self-defined temperature.
Bluetooth anti-loss function
Support remote connection and multi-user sharing. 【 【【 【Intended Use Intended UseIntended Use Intended Use】 】】 】 For human body temperature measuring used by family and medical institutions. 【 【【 【Installation Guid Installation GuidInstallation Guid Installation Guidelines elineselines elines】 】】 】 1. Please scan QR code below to download the software according to relative OS: iOS Android 2. Upload Battery 3、 Build Connection 4、 Wearing Description 【 【【 【App Instructions】 】】 】 Example: Android devices 1. 1. 1. 1. BT connection BT connectionBT connection BT connection (1) Connection • For first connection, please directly click ‘Connect’→ ‘Device Connect’ • If not first time connection, please follow steps as below： (2) BT search page After click‘Device Connect’, there would be a device search page, search relative device and build the connection. Notice: The initial name of the thermometer is ‘Bosma Therm.’，please confirm the right device according to the mac address under the device name. (3)BT connection success page After successful connection, the page will show a Bluetooth connection logo at ‘connected’status, the battery level, connection time, and the ID, mac address. User can confirm whether connection is with right device according to mac address. User can also modify the device name by clicking the thumb on the right. Click the left corner to return to homepage. Check out the temperature value and the curves, or click the ‘Fullscreen’ to check out the temperature curves. 2.Remote Connections Guidelines： • To use the remote connection, please login first. Details of User Sign up/Log in please refer to Point5. • Remote connection requests two smart phones to use simultaneously, one smart phone with connected Bluetooth sends out the remote connection invitation, meanwhile the other smart phone builds the remote connection. Logged users with Bluetooth connected smart phones can send out invitations to other users, so other users can conduct data remote monitoring, details as below • Remote connection invitation: Click the share button showed below to user invitation page, after the invitation code generated, send the code to other users that request remote connection. • Remote connection: On …

Text truncated - open the document above for the full version.

External Photo

Internal Photo

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Application No..: GZEM1505002262CR Page: 1 of 1 FCC ID: 2AEZAWT001 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspxand,for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. RF Exposure Compliance Requirement The product belongs to standalone portable device base the FCC rule part 2.1091&2.1093. The transmission frequencies of the device are between 100 MHz and 6 GHz. The worst case test separation distance is 5mm. The Max Radiated Output Power and SAR Test Exclusion Threshold (mW) are listed below: Transmit frequency (GHz) Max Radiated Output Power (dBm) Max Radiated Output Power (mW) SAR Test Exclusion Threshold (mW) 2.402 3.94 2.48 9.7 2.440 3.68 2.33 9.6 2.480 2.33 1.71 9.5 The SAR Test Exclusion Threshold for 100 MHz to 6 GHz is calculated from: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. According to SAR Exclusion Threshold in KDB 447498 (D01) General RF Exposure Guidance v05r02, the SAR report is not required.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technological Development District, Guangzhou, China 510663 Telephone: +86 (0) 20 82155555 Fax: +86 (0) 20 82075059 Email: [email protected] Report No.: GZEM150500226201 Page: 1 of 53 FCC ID: 2AEZAWT001 Authorized Signature: Jerry Chan Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspxand,for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 1 Cover Page TEST REPORT The following sample(s) was/were submitted and identified on behalf of the client as: Application No.: GZEM1505002262CR Applicant: GUANGZHOU BOSMA TECHNOLOGY CO.,LTD. Manufacturer: The same as applicant FCC ID: 2AEZAWT001 Product Description: Cloud Smart Thermometer Model No.: WT001-1, WT001-2, WT001-3, WT001-4, WT001-5, WT001-6, WT001-7, WT001-8, WT001-9, WT001-10, WT001-11, WT001-12 ♣ ♣ Please refer to section 3 of this report for further details. Trade Mark: BOSMA Standards: CFR 47 FCC PART 15 Subpart C: 2014 section 15.247 Date of Receipt: 2015-05-19 Date of Test: 2015-06-01 Date of Issue: 2015-07-10 Test Result : Pass* * In the configuration tested, the EUT detailed in this report complied with the standards specified above. Please refer to section 3 of this report for further detail. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM150500226201 Page: 2 of 53 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspxand,for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 2 Version Revision Record Version Chapter Date Modifier Remark 00 2015-07-10 Original Report Authorized for issue by: Tested By 2015-06-01 (Lily Kuang) /Project Engineer Date Prepared By 2015-06-05 (Icy Chen) / Clerk Date Checked By 2015-07-10 (Jerry Chan / Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM150500226201 Page: 3 of 53 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspxand,for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sam…

Text truncated - open the document above for the full version.

Test Setup Photo 1.1 RADI ATE D EM ISS IO N TEST SET UP Below 1GHz Above 1GHz