2AF77-H2041670Blink Camera

Blink Indoor/Outdoor QSG US/CA Quick Start Guide Getting started with Blink is easy! Existing users skip to step 3. 1. Download the Blink Home Monitor App. 2. Add your Sync Module 2. 3. Add your camera(s) to your system. Follow the in-app instructions to complete setup. For more detailed setup and mounting instructions go to blinkforhome.com/setup or scan the QR code.

WSL Blink Indoor/Outoor Final US - IMPORTANT PRODUCT INFORMATION [Triangle with !] SAFETY INFORMATION FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE. [TRIANGLE WITH !] BATTERY SAFETY The lithium battery in this device cannot be recharged or replaced. Do not open, disassemble, bend, deform, puncture or shred the battery. Do not modify, attempt to insert foreign objects into the battery or immerse or expose to water or other liquids. Do not expose the battery to fire, explosion or other hazard. Promptly dispose of used batteries in accordance with applicable laws and regulations. If dropped and you suspect damage, take steps to prevent any ingestion or direct contact of fluids and any other materials from the battery with skin or clothes. Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet and wait for the device and adapter to dry completely before plugging them in again. Do not attempt to dry your device or adapter with an external heat source, such as a microwave oven or a hair dryer. If the device or adapter appear damaged, discontinue use immediately. Use only accessories supplied with the device to power your device. To avoid risk of electric shock, do not touch your device or any wires connected to your device during a lightning storm. - PRODUCT SPECIFICATIONS - Blink Indoor, Blink Outdoor BCM00410U, BCM00400U: BCM00410U, BCM00400U Power Supply Rating: 2 1.5V AA Single Use Lithium Metal batteries and optional USB 5V 1A external power supply Operating Temperature Blink Outdoor: -20 to 45° C Operating Temperature Blink Indoor: 0 to 35° C - FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The party responsible for FCC compliance is Amazon.com Services LLC 410 Terry Ave North, Seattle, WA 98109 USA If you wish to contact Amazon visit www.amazon.com/devicesupport, select United States, click Help & Troubleshooting, then scroll to the bottom of the page and under the Talk to an Associate option, click on Contact Us. Device Name: Blink Indoor, Blink Outdoor Model: - RECYCLING YOUR DEVICE PROPERLY In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations. For information about recycling your device, go to www.amazon.com/devicesupport. - Additional Safety & Compliance Information For additional safety, compliance, recycling and other important information regarding your device, please refer to the Legal and Compliance section of the About Blink menu in the Settings in your app. Blink Terms & Policies - BEFORE USING THE BLINK DEVICE, PLEASE READ THE TERMS FOUND AT HTTPS://BLINKFORHOME.COM/PAGES/BLINK-TERMS-WARRANTIES-AND-NOTICES AND ALL RULES AND POLICIES FOR THE DEVICE AND SERVICES RELATED TO THE DEVICE (INCLUDING, BUT NOT LIMITED TO, THE APPLICABLE BLINK PRIVACY NOTICE AND ANY APPLICABLE RULES OR USAGE PROVISIONS ACCESSIBLE THROUGH THE HTTPS://BLINKFORHOME.COM/PAGES/BLINK-TERMS-WARRANTIES-AND-NOTICES WEBSITE OR THE BLINK APP (COLLECTIVELY, THE “AGREEMENTS”). BY USING THE BLINK DEVICE, YOU AGREE TO BE BOUND BY THE TERMS OF THE AGREEMENTS. Your Blink device is covered by a one year Limited Warranty. Details are available at https://blinkforhome.com/pages/blink-terms-warranties-and-notices. ©2020 Amazon.com, Inc. or its affiliates. Amazon, Alexa, Blink, and all related marks are trademarks of Amazon.com, Inc. or its affiliates. Designed in Massachusetts, assembled in China Canada EN- IMPORTANT PRODUCT INFORMATION [Triangle with !] SAFETY INFORMATION FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE. [TRIANGLE WITH !] BATTERY SAFETY The lithium battery in this device cannot be recharged or replaced. Do not open, disassemble, bend, deform, puncture or shred the battery. Do not modify, attempt to insert foreign objects into the battery or immerse or expose to water or other liquids. Do not expose the battery to fire, explosion or other hazard. Promptly dispose of used batteries in accordance with applicable laws and regulations. If dropped and you suspect damage, take steps to prevent any ingestion or direct contact of fluids and any other materials from the battery with skin or clothes. Do not expose your device or adaptor to liquids. If your device or adaptor gets wet, carefully unplug all cables without getting your hands wet and wait for the device and adaptor to dry completely before plugging them in again. Do not attempt to dry your device or adaptor with an external heat source, such as a microwave oven or a hair dryer. If the device or adaptor appear damaged, discontinue use immediately. Use only accessories supplied with the device to power your device. To avoid risk of electric shock, do not touch your device or any wires connected to your device during a lightning storm. PRODUCT SPECIFICATIONS - Blink Indoor, Blink Outdoor BCM00410U, BCM00400U: BCM00410U, BCM00400U Power Supply Rating: 2 1.5V AA Single Use Lithium Metal batteries and optional USB 5V 1A external power supply Operating Temperature Blink Outdoor: -20 to 45 °C Operating Temperature Blink Indoor: 0 to 35 °C FR-INFORMATIONS IMPORTANTES SUR LE PRODUIT [TRIANGLE WITH !] INFORMATIONS SUR LA SÉCURITÉLE MANQUEMENT À CES CONSIGNES DE SÉCURITÉ POURRAIT ÊTRE À L’ORIGINE D’UN INCENDIE, D’UNE ÉLECTROCUTION OU D’AUTRES BLESSURES OU DOMMAGES. La batterie au lithium de cet appareil ne peut être rechargée ni remplacée. Ne pas ouvrir, démonter, plier, déformer, percer ni découper la batterie. Ne pas modifier la batterie, ne pas essayer d'insérer des corps étrangers dans la batterie.…

Text truncated - open the document above for the full version.

External Photographs Immedia Semiconductor, LLC. Blink Camera, FCC ID 2AF77-H2041670 IC 20741-H2041670 Front of Enclosure External Photographs Immedia Semiconductor, LLC. Blink Camera, FCC ID 2AF77-H2041670 IC 20741-H2041670 Left Side of Enclosure External Photographs Immedia Semiconductor, LLC. Blink Camera, FCC ID 2AF77-H2041670 IC 20741-H2041670 Rear of Enclosure External Photographs Immedia Semiconductor, LLC. Blink Camera, FCC ID 2AF77-H2041670 IC 20741-H2041670 Right Side of Enclosure External Photographs Immedia Semiconductor, LLC. Blink Camera, FCC ID 2AF77-H2041670 IC 20741-H2041670 Bottom of Enclosure External Photographs Immedia Semiconductor, LLC. Blink Camera, FCC ID 2AF77-H2041670 IC 20741-H2041670 Top of Enclosure

Immedia Semiconductor, LLC. Blink Camera, FCC ID 2AF77-H2041670 IC 20741-H2041670 ID Label Location Immedia Semiconductor, LLC. Blink Camera, FCC ID 2AF77-H2041670 IC 20741-H2041670 ID Label Artwork, Model BCM00400U ID Label Artwork, Model BCM00410U

Internal Photographs Immedia Semiconductor, LLC. Blink Camera, FCC ID 2AF77-H2041670 IC 20741-H2041670 Back cover removed, Battery compartment Internal Photographs Immedia Semiconductor, LLC. Blink Camera, FCC ID 2AF77-H2041670 IC 20741-H2041670 Inside back cover removed Internal Photographs Immedia Semiconductor, LLC. Blink Camera, FCC ID 2AF77-H2041670 IC 20741-H2041670 Mezz Board Side 1 Internal Photographs Immedia Semiconductor, LLC. Blink Camera, FCC ID 2AF77-H2041670 IC 20741-H2041670 Mezz Board Side 2 Internal Photographs Immedia Semiconductor, LLC. Blink Camera, FCC ID 2AF77-H2041670 IC 20741-H2041670 Main Board, Battery /LFR Antenna Board Attached, Side 1 Battery /LFR Antenna Board bottom Internal Photographs Immedia Semiconductor, LLC. Blink Camera, FCC ID 2AF77-H2041670 IC 20741-H2041670 Main Board, Battery /LFR Antenna Board Attached, Side 2 Battery /LFR Antenna Board bottom Internal Photographs Immedia Semiconductor, LLC. Blink Camera, FCC ID 2AF77-H2041670 IC 20741-H2041670 Main Board Camera shutter removed, Battery / LFR Antenna Board Attached, Side 2 Internal Photographs Immedia Semiconductor, LLC. Blink Camera, FCC ID 2AF77-H2041670 IC 20741-H2041670 Battery /LFR Antenna Board Top

FCC Part 15, Subpart C, Section 15.247 Test Report On Blink Indoor/Outdoor Camera FCC ID: 2AF77-H2041670 Customer Name: Immedia Semiconductor, LLC Customer P.O: 2D-03495230 Date of Report: July 15, 2020 Test Report No: R-6521H-1 Test Start Date: June 23, 2020 Test Finish Date: June 30, 2020 Test Engineer: T. Hannemann Test Technician: M. Seamans Approved By: S. Wentworth Report Prepared By: D. Hull Our letters, procedures and reports are for the exclusive use of the customer to whom they are addressed and their communication or the use of the name of Retlif Testing Laboratories must receive our prior written approval. Our letters, procedures and reports apply only to the sample tested and are not necessarily indicative of the qualities of apparently identical or similar products. The letters, procedures and reports and the name of Retlif Testing Laboratories or insignia are not to be used under any circumstances in advertising to the general public. This test report shall not be reproduced, except in full, without the written approval of Retlif Testing Laboratories. Report No. R-6521H-1 Page 2 of 62 Retlif Testing Laboratories R Technical Information Report Number: R-6521H-1 Customer: Immedia Semiconductor, LLC Address: 100 Riverpark Drive North Reading, MA 01864 Manufacturer: Immedia Semiconductor, LLC Manufacturer Address: 100 Riverpark Drive North Reading, MA 01864 Test Sample: Blink Indoor/Outdoor Camera Model Number: BCM00400U* Serial Number: G8T1-GH00-0205-00KW (Conducted Testing) G8T1-GH00-0205-0089 (Radiated Testing) FCC ID: 2AF77- H2041670 Type: Frequency Hopping Spread Spectrum Transmitter Power Requirements: 5 VDC via External 120 VAC power adapter or 3 VDC via internal batteries Frequency of Operation: 902.4 MHz to 927.6 MHz Equipment Class: DSS Antenna Type: Internal PCB Antenna – 1.5 dBi Gain Equipment Use: Used in a Home Monitoring System Test Specification: FCC Rules and Regulations Part 15, Subpart C, Section 15.247 *Note: The testing included in this test report is representative of Model Number: BCM00400U and Model Number: BCM00410U. The two models are electrically identical. The differences between these two models is the plastic external enclosure. Test Procedure: ANSI C63.4:2014 ANSI C63.10:2013 FCC 558074 D01 15.247 Meas Guidance v05r02, April 2, 2019 Test Facility: Retlif Testing Laboratories 101 New Boston Road Goffstown, NH 03045 FCC Designation Number: US5327 Report No. R-6521H-1 Page 3 of 62 Retlif Testing Laboratories R Tests Performed FCC Part 15, Subpart C Test Method 15.247(a)(1) Channel Separation 15.247(a)(1) 20 dB Bandwidth 15.247(a)(1)(i) Number of Channels and Occupancy Time 15.247(b)(2) and (4) Peak Conducted Output Power 15.247(d) Spurious Emissions, 30 MHz to 10 GHz 15.247(d) Field Strength of Spurious Emissions Section 15.207 (a) Conducted Emissions EUT Operation: The EUT is an outdoor Wi-Fi connected home security camera. The camera has a passive infrared motion sensor that can be used to trigger recording of video clips that are sent by Wi-Fi to internet based servers that relay the clips to the users’ mobile device. The EUT can also receive commands from the user to start transmission of video or update status via 915 MHz FHSS radio. Table 1 – Support Equipment Description Manufacturer Model Number Serial Number Radiated Testing Blink Sync Module Immedia Semiconductor BSM00201U 244-148-306 iPad Tablet Apple, Inc. A1B22 FNVX7010HLF9 Conducted Testing Laptop PC HP Probook 450G5 5CD88466QTY Sync Module Immedia Semiconductor BSM00203U 280-885-766 Report No. R-6521H-1 Page 4 of 62 Retlif Testing Laboratories R Certification and Signatures We certify that this report is a true representation of the results obtained from the tests of the equipment stated. We further certify that the measurements shown in this report were made in accordance with the procedures indicated and vouch for the qualifications of all Retlif Testing Laboratories personnel taking them. Scott Wentworth Branch Manager Todd Hannemann EMC Test Engineer iNARTE Certified Technician ATL-0255-T Non-Warranty Provision The testing services have been performed, findings obtained and reports prepared in accordance with generally accepted laboratory principles and practices. This warranty is in lieu of all others, either expressed or implied. Non-Endorsement This test report contains only findings and results arrived at after employing the specific test procedures and standards listed herein. It is not intended to constitute a recommendation, endorsement or certification of the product or material tested. This report must not be used by the client to claim product endorsement by ANSI National Accreditation Board (ANAB). Report No. R-6521H-1 Page 5 of 62 Retlif Testing Laboratories R Revision History Revisions to this document are listed below; the latest revised document supersedes all previous issues of this document: Revision Date Pages Affected - July 15, 2020 Original Release Report No. R-6521H-1 Page 6 of 62 Retlif Testing Laboratories R Requirements and Test Results Requirement: FCC Section 15.247 (a)(1) Channel Separation and 20 dB Bandwidth Frequency hopping systems shall have hopping channel carrier frequencies separated by a minimum of 25 kHz or the 20 dB bandwidth of the hopping channel, whichever is greater. Alternatively, frequency hopping systems operating in the 2400-2483.5 MHz band may have hopping channel carrier frequencies that are separated by 25 kHz or two-thirds of the 20 dB bandwidth of the hopping channel, whichever is greater, provided the systems operate with an output power no greater than 125 mW. The system shall hop to channel frequencies that are selected at the system hopping rate from a pseudo randomly ordered list of hopping frequencies. Each frequency must be used equally on the average by each transmitter. The system receivers shall have input bandwidths that match the hopping channel bandwidths of their corresponding transmitters and shall shift frequencie…

Text truncated - open the document above for the full version.

Report No. R-6521H-1 Page 49 of 62 Retlif Testing Laboratories R Test Photographs Field Strength of Spurious Emissions Horizontal Antenna Polarization, 30 to 200 MHz Vertical Antenna Polarization, 30 to 200 MHz Report No. R-6521H-1 Page 50 of 62 Retlif Testing Laboratories R Test Photographs Field Strength of Spurious Emissions Horizontal Antenna Polarization, 200 MHz to 1 GHz Vertical Antenna Polarization, 200 MHz to 1 GHz Report No. R-6521H-1 Page 51 of 62 Retlif Testing Laboratories R Test Photographs Field Strength of Spurious Emissions Horizontal Antenna Polarization, 1 GHz to 10 GHz Vertical Antenna Polarization, 1 GHz to 10 GHz

Report No. R-6521H-3 Page 74 of 93 Retlif Testing Laboratories R Test Photographs Spurious Radiated Emissions, 30 MHz to 25 GHz Horizontal Polarization, 30 to 200 MHz Vertical Polarization, 30 to 200 MHz Report No. R-6521H-3 Page 75 of 93 Retlif Testing Laboratories R Test Photographs Spurious Radiated Emissions, 30 MHz to 25 GHz Horizontal Polarization, 200 MHz to 1 GHz Vertical Polarization, 200 MHz to 1 GHz Report No. R-6521H-3 Page 76 of 93 Retlif Testing Laboratories R Test Photographs Spurious Radiated Emissions, 30 MHz to 25 GHz Horizontal Polarization, 1 to 18 GHz Vertical Polarization, 1 to 18 GHz