2AF8T-BW-SC2MyScale ANALYZER

BewellConnect - BW-SC2 - User Manual - 1120151 BW-SC1 Distribué par / Distributed by www.visiomed-lab.com Visiomed SAS France Service clients / Customers service 8, avenue Kléber 75116 Paris - France Tel : +33 8 92 350 366 (0,34€/mn) Fax : +33 1 44 17 93 10 [email protected] Made in P. R. C. MyScale BW-SC2 is manufactured by: Shenzhen Healthcare Electronic Technology Co. LTD. Block 48, Changxing Industrial Zone, ChangZhen, Gongming Town, Guangming District Shenzhen, Guangdong China 518132 MyScale BW-SC2 BewellConnect - BW-SC2 - User Manual - 1120153 LEXIQUE DES SYMBOLES / SAFETY PRECAUTIONS Marquage CE / CE marking Pièce appliquée de type BF / Type BF applied part Protégé contre les chutes verticales de gouttes d’eau / Protected against vertically falling water drops Attention / Caution Garder au sec / Keep dry Voir le manuel d’instructions. Avis sur l’équipement “Suivre les instructions d’utilisation”. / Refer to instruction manual. Note on the equipment “Follow instructions for use”. Le dispositif, ses accessoires et son emballage doivent être recyclés de la façon appropriée au terme de leur utilisation. Veuillez respecter les règlements et règles locaux. / The device, accessories and the packaging have to be disposed correctly at the end of the usage. Please follow local ordinances or regulations for disposal. EC REP Représentant agréé au sein de la Communauté Européenne / Authorized representative in the European community Fabricant / Manufacturer SN Numéro de série / Serial number Year Month DaySerial number SN SN : Serial number BewellConnect - BW-SC2 - User Manual - 1120155 FR BW-SC2 MyScale BewellConnect - BW-SC2 - User Manual - 112015BewellConnect - BW-SC2 - User Manual - 11201567 Ce produit est conforme à la norme Reach (RoHS). TABLE DES MATIÈRES Découvrez comment installer et utiliser l’application BewellConnect® en vous connectant sur notre site www.bewell-connect.com/bewellconnect-application Le fabricant se réserve le droit de modifier sans aucun avis préalable les caractéristiques techniques du produit. Cher Client, Vous venez d’acquérir ce pèse-personne impédancemètre connecté et intelligent Bewell- Connect® et nous vous en remercions. Nous vous en souhaitons un excellent usage et vous recommandons de lire attentivement cette notice d’utilisation. 1. AVERTISSEMENTS Toute modification n’ayant pas été approuvée expressément par la partie responsable de la con- formité peut annuler l’autorisation d’utiliser l’équipement. L’équipement a été testé et jugé conforme aux restrictions prescrites pour les dispositifs numé- riques de classe B, conformément à la section 15 des directives de la FCC. Ces restrictions visent à garantir une protection suffisante contre les interférences nocives dans un environnement domestique. Cet équipement produit, utilise et peut émettre de l’énergie radioélectrique et, s’il n’est pas installé et utilisé conformément aux instructions, peut causer des interférences nuisi- bles aux communications radio. Si cet équipement cause des interférences nuisibles à la radio ou au téléviseur, ce qui peut être vé- rifié en le rallumant, l’utilisateur est invité à corriger l’interférence en appliquant ou une plusieurs des mesures suivantes : - Réorienter ou déplacer l’antenne de réception. - Eloigner l’équipement du récepteur. - Connecter l’équipement à une prise sur un circuit différent de celui sur lequel le récepteur reste branché. - Consulter le revendeur ou un technicien spécialisé radio/TV. - Aucune modification n’est autorisée sur ce produit. - Les informations relatives aux interférences électromagnétiques ou autres entre MyScale Ana- lyzer et d’autres appareils ainsi que les recommandations ont pour but d’éviter ou de minimiser ce type d’interférences. - Cet appareil ne nécessite pas de calibrage. - L’utilisateur doit vérifier que l’équipement fonctionne en toute sécurité et qu’il est en bon état avant de s’en servir. - Conditions inacceptables nuisibles à l’équipement ME : - Abondance de peluches, de poussière ou de lumière. -Liste d’appareils connus ou d’autres sources pouvant potentiellement créer des interférences. - Dégâts causés par des animaux, des insectes ou des enfants. 1. AVERTISSEMENTS ...............................................................7 2. INFORMATIONS .................................................................8 2.1. DESCRIPTION DU PRODUIT .....................................................9 2-2. À PROPOS DE LA MASSE GRAISSEUSE ...........................................9 2-3. À PROPOS DE LA MASSE HYDRIQUE ............................................9 2-4. À PROPOS DE LA MASSE MUSCULAIRE .........................................10 2-5. À PROPOS DE LA MASSE OSSEUSE ............................................10 2-6. À PROPOS DU BMI - BODY MASS INDEX (IMC - INDICE DE MASSE CORPORELLE) ...11 2-7. À PROPOS DES BESOINS CALORIQUES JOURNALIERS ...........................11 3. UTILISATION ...................................................................11 3-1. PRÉCAUTIONS AVANT UTILISATION ...........................................11 3-2. UTILISATION DU PÈSE-PERSONNE .............................................12 3-3. CHANGEMENT DES PILES ......................................................13 4. NETTOYAGE ET ENTRETIEN ......................................................14 5. ÉVITER LES DYSFONCTIONNEMENTS ............................................14 6. SPÉCIFICATIONS TECHNIQUES ..................................................14 7. GUIDE DE DÉPANNAGE .........................................................16 BewellConnect - BW-SC2 - User Manual - 112015BewellConnect - BW-SC2 - User Manual - 11201589 - Utiliser cet appareil uniquement pour l’usage auquel il est destiné tel que décrit dans cette notice. - Cet appareil peut être utilisé pour un usage personnel à domicile. Tout autre usage pourrait annuler la garantie et causer des blessures - Utiliser cet appareil dans une plage de température ambiante comprise entre…

Text truncated - open the document above for the full version.

1 Photographs - EUT Constructional Details Test model No.: BW-SC2W

1 Photographs - EUT Constructional Details Test model No.: BW-SC2W

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 W orkshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM150900576203 Page: 1 of 6 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page SAR Evaluation Report Application No.: SZEM1509005762CR Applicant: BEWELL CONNECT CORP Manufacturer: SHENZHEN HEAL THCARE ELECTRONIC TECHNOLOGY CO., LTD. Factory: SHENZHEN HEAL THCARE ELECTRONIC TECHNOLOGY CO., LTD. Product Name: MyScale ANALYZER Model No.(EUT): BW-SC2W Add Model No.: FG9556W, BW-SC2B, FG9556B Trade Mark: Bewell connect S/N: BW-SC2W-PP-A1.1-020, BW-SC2W-PP-A1.1-021 FCC ID: 2AF8T-BW-SC2 Standards: 47 CFR Part 1.1307 (2014) 47 CFR Part 2.1093 (2014) KDB447498D01 General RF Exposure Guidance v05r02 Date of Receipt: 2015-09-15 Date of Test: 2015-09-18 to 2015-09-30 Date of Issue: 2015-10-21 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM150900576203 Page: 2 of 6 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Version Revision Record Version Chapter Date Modifier Remark 00 2015-10-21 Original Authorized for issue by: Tested By 2015-09-30 (Benson Wang) /Project Engineer Date Prepared By 2015-10-21 (Venus Wu) /Clerk Date Checked By 2015-10-21 (Eric Fu) /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM150900576203 Page: 3 of 6 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in th…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 W orkshop, M-10, Middle Section, Science & Technology Park, Nanshan District Shenzhen, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM150900576201 Page: 1 of 10 Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only TEST REPORT Application No.: SZEM1509005762CR Applicant: BEWELL CONNECT CORP Address of Applicant: SUITE 410 - 185 ALEWIFE BROOK PARKWAY COMBRIDGE, MA 02138 - USA Manufacturer/ Factory: SHENZHEN HEAL THCARE ELECTRONIC TECHNOLOGY CO., LTD. Address of Manufacturer/ Factory: Block 48, Changxing Industrial Zone, ChangZhen, Gongming Town, Guangming District, Shenzhen, Guangdong, China 518132 Equipment Under Test (EUT): EUT Name: MyScale ANALYZER Model No.: BW-SC2W, FG9556W, BW-SC2B, FG9556B ♣ ♣ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. S/N: BW-SC2W-PP-A1.1-019 Trade Mark: Bewell connect Standards: 47 CFR PART 15,Subpart B:2014 Date of Receipt: 2015-09-15 Date of Test: 2015-09-18 Date of Issue: 2015-10-21 Test Result : Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM150900576201 Page: 2 of 10 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only 2 Test Summary Item Standard Method Class Result Radiated Disturbance (30MHz-1GHz) 47 CFR PART 15,Subpart B:2014 ANSI C63.4 Class B Pass The highest frequency of the internal sources of the EUT Upper frequency of measurement Range Below 1.705MHz 30MHz 1.705MHz to 108MHz 1GHz 108MHz to 500MHz 2GHz 500MHz to 1GHz 5GHz Above 1GHz 5th harmonic of the highest frequency or 40GHz, whichever is lower Remark: Model No.: BW-SC2W, FG9556W, BW-SC2B, FG9556B Only the model BW-SC2W was tested, since the electrical circuit design, layout, components used and internal wiring were identical for all above models. Only different on model name, color and client. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM150900576201 Page: 3 of 10 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if an…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 W orkshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM150900576202 Page: 1 of 47 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page FCC REPORT Application No: SZEM1509005762CR Applicant: BEWELL CONNECT CORP Manufacturer: SHENZHEN HEAL THCARE ELECTRONIC TECHNOLOGY CO., LTD. Factory: SHENZHEN HEAL THCARE ELECTRONIC TECHNOLOGY CO., LTD. Product Name: MyScale ANALYZER Model No.(EUT): BW-SC2W Add Model No.: FG9556W, BW-SC2B, FG9556B Trade Mark: Bewell connect S/N: BW-SC2W-PP-A1.1-020, BW-SC2W-PP-A1.1-021 FCC ID: 2AF8T-BW-SC2 Standards: 47 CFR Part 15, Subpart C (2014) Date of Receipt: 2015-09-15 Date of Test: 2015-09-18 to 2015-09-30 Date of Issue: 2015-10-21 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM150900576202 Page: 2 of 47 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Version Revision Record Version Chapter Date Modifier Remark 00 2015-10-21 Original Authorized for issue by: Tested By 2015-09-30 (Benson Wang) /Project Engineer Date Prepared By 2015-10-21 (Venus Wu) /Clerk Date Checked By 2015-10-21 (Eric Fu) /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM150900576202 Page: 3 of 47 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retai…

Text truncated - open the document above for the full version.

1 Photographs - EUT Test Setup Test model No.: BW-SC2W 1.1 Radiated Emission 1.2 Radiated Spurious Emission