2AF8T-BW-SC4MyScale XL, MyScale INITIAL

BewellConnect - BW-SC4 - User Manual - 1120151 BW-SC1 MyScale Distribué par / Distributed by www.visiomed-lab.com Visiomed SAS France Service clients / Customers service 8, avenue Kléber 75116 Paris - France Tel : +33 8 92 350 366 (0,34€/mn) Fax : +33 1 44 17 93 10 [email protected] Made in P. R. C. BW-SC4 BewellConnect - BW-SC4 - User Manual - 112015BewellConnect - BW-SC4 - User Manual - 11201523 LEXIQUE DES SYMBOLES / SAFETY PRECAUTIONS Marquage CE / CE marking Attention / Caution Garder au sec / Keep dry Voir le manuel d’instructions. Avis sur l’équipement “Suivre les instructions d’utilisation”. / Refer to instruction manual. Note on the equipment “Follow instructions for use”. Le dispositif, ses accessoires et son emballage doivent être recyclés de la façon appropriée au terme de leur utilisation. Veuillez respecter les règlements et règles locaux. / The device, accessories and the packaging have to be disposed correctly at the end of the usage. Please follow local ordinances or regulations for disposal. EC REP Représentant agréé au sein de la Communauté Européenne / Authorized representative in the European community Fabricant / Manufacturer SN Numéro de série / Serial number Year Month DaySerial number SN SN : Serial number BewellConnect - BW-SC4 - User Manual - 1120155 BW-SC4 MyScale FR BewellConnect - BW-SC4 - User Manual - 112015BewellConnect - BW-SC4 - User Manual - 11201567 Ce produit est conforme à la norme Reach (RoHS) TABLE DES MATIÈRES Découvrez comment installer et utiliser l’application BewellConnect® en vous connectant sur notre site www.bewell-connect.com/install Le fabricant se réserve le droit de modifier sans aucun avis préalable les caractéristiques techniques du produit. Cher Client, Vous venez d’acquérir ce pèse-personne connecté BewellConnect® et nous vous en remercions. Nous vous en souhaitons un excellent usage et vous recommandons de lire attentivement cette notice d’utilisation. 1. AVERTISSEMENTS Toute modification n’ayant pas été approuvée expressément par la partie responsable de la conformité peut annuler l’autorisation d’utiliser l’équipement. L’équipement a été testé et jugé conforme aux restrictions prescrites pour les dispositifs numériques de classe B, conformément à la section 15 des directives de la FCC. Ces restrictions visent à garantir une protection suffisante contre les interférences nocives dans un environne- ment domestique. Cet équipement produit, utilise et peut émettre de l’énergie radioélectrique et, s’il n’est pas installé et utilisé conformément aux instructions, peut causer des interférences nuisibles aux communications radio. Si cet équipement cause des interférences nuisibles à la radio ou au téléviseur, ce qui peut être vérifié en le rallumant, l’utilisateur est invité à corriger l’interférence en appliquant ou une plus- ieurs des mesures suivantes : - Réorienter ou déplacer l’antenne de réception. - Eloigner l’équipement du récepteur. - Connecter l’équipement à une prise sur un circuit différent de celui sur lequel le récepteur reste branché. - Consulter le revendeur ou un technicien spécialisé radio/TV. - Aucune modification n’est autorisée sur ce produit. - Les informations relatives aux interférences électromagnétiques ou autres entre MyScale Analyzer et d’autres appareils ainsi que les recommandations ont pour but d’éviter ou de minimiser ce type d’interférences. - Cet appareil ne nécessite pas de calibrage. - L’utilisateur doit vérifier que l’équipement fonctionne en toute sécurité et qu’il est en bon état avant de s’en servir. - Conditions inacceptables nuisibles à l’équipement ME : - Abondance de peluches, de poussière ou de lumière. -Liste d’appareils connus ou d’autres sources pouvant potentiellement créer des interférences. - Dégâts causés par des animaux, des insectes ou des enfants. 1. AVERTISSEMENTS ...............................................................7 2. INFORMATIONS .................................................................8 2-1. À PROPOS DU BMI - BODY MASS INDEX (IMC - INDICE DE MASSE CORPORELLE) .8 2-2. À PROPOS DES BESOINS CALORIQUES JOURNALIERS ..........................8 3. UTILISATION ....................................................................8 3-1. PRÉCAUTIONS AVANT UTILISATION ...........................................8 3-2. UTILISATION DU PÈSE-PERSONNE .............................................9 3-3. CHANGEMENT DES PILES ....................................................10 4. NETTOYAGE ET ENTRETIEN ......................................................10 5. ÉVITER LES DYSFONCTIONNEMENTS ............................................11 6. SPÉCIFICATIONS TECHNIQUES ..................................................11 7. GUIDE DE DÉPANNAGE .........................................................12 BewellConnect - BW-SC4 - User Manual - 112015BewellConnect - BW-SC4 - User Manual - 11201589 - Utiliser cet appareil uniquement pour l’usage auquel il est destiné tel que décrit dans cette notice. - Cet appareil peut être utilisé pour un usage personnel à domicile. Tout autre usage pourrait annuler la garantie et causer des blessures - Utiliser cet appareil dans une plage de température ambiante comprise entre 0 et 40°C. - Ne pas exposer cet appareil à des conditions de températures extrêmes > 60°C ou < -20°C. - Ne pas utiliser cet appareil à une humidité relative supérieure à 85%. - Cet appareil doit toujours être placé dans un endroit propre et sec. - Ne pas exposer cet appareil au soleil, ni à l’eau. - Ne pas exposer cet appareil aux chocs électriques. - Ne pas utiliser cet appareil en extérieur. - Ne jamais laisser tomber l’appareil. - Suivre les instructions d’entretien stipulées dans cette notice. - Ne pas essayer d’ouvrir l’appareil. En cas de problème, contactez votre revendeur. - Ne pas laisser cet appareil à la portée des enfants. - Les résultats de mesure sont donnés à titre indicatif. En cas de doute concernant vos résultats, veuillez contacter votre médecin. - Cesse…

Text truncated - open the document above for the full version.

1 Photographs - EUT Constructional Details Test model No.: BW-SC4W

1 Photographs - EUT Constructional Details Test model No.: BW-SC4W

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM150900576303 Page: 1 of 6 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page SAR Evaluation Report Application No.: SZEM1509005763CR Applicant: BEWELL CONNECT CORP Manufacturer/ Factory: SHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD Product Name: MyScale XL, MyScale INITIAL Model No.(EUT): BW-SC4W Add Model No.: BG6525W, BW-SC4B, BG6525B, BW-SC3W, BG6519W, BW-SC3B, BG6519B S/N: Trade mark: BW-SC4W-PP-A1.1-020, BW-SC4W-PP-A1.1-021 Bewell connect FCC ID: 2AF8T-BW-SC4 Standards: 47 CFR Part 1.1307 (2014) 47 CFR Part 2.1093 (2014) KDB447498D01 General RF Exposure Guidance v05r02 Date of Receipt: 2015-09-15 Date of Test: 2015-09-18 to 2015-11-11 Date of Issue: 2015-11-19 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM150900576303 Page: 2 of 6 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Version Revision Record Version Chapter Date Modifier Remark 00 2015-11-19 Original Authorized for issue by: Tested By 2015-10-27 (Benson Wang) /Project Engineer Date Prepared By 2015-11-03 (Jade Chen) /Clerk Date Checked By 2015-11-03 (Eric Fu) /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM150900576303 Page: 3 of 6 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test r…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM150900576302 Page: 1 of 49 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page FCC REPORT Application No: SZEM1509005763CR Applicant: BEWELL CONNECT CORP Manufacturer/ Factory: SHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD Product Name: MyScale XL, MyScale INITIAL Model No.(EUT): BW-SC4W Add Model No.: BG6525W, BW-SC4B, BG6525B, BW-SC3W, BG6519W, BW-SC3B, BG6519B S/N: Trade mark: BW-SC4W-PP-A1.1-020, BW-SC4W-PP-A1.1-021 Bewell connect FCC ID: 2AF8T-BW-SC4 Standards: 47 CFR Part 15, Subpart C (2014) Date of Receipt: 2015-09-15 Date of Test: 2015-09-18 to 2015-11-11 Date of Issue: 2015-11-19 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM150900576302 Page: 2 of 49 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Version Revision Record Version Chapter Date Modifier Remark 00 2015-11-19 Original Authorized for issue by: Tested By 2015-10-27 (Benson Wang) /Project Engineer Date Prepared By 2015-11-03 (Jade Chen) /Clerk Date Checked By 2015-11-03 (Eric Fu) /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM150900576302 Page: 3 of 49 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained fo…

Text truncated - open the document above for the full version.

1 Photographs - EUT Test Setup Test model No.: BW-SC4W 1.1 Radiated Spurious Emission