2AFCM-MS515Computer Speaker

August International Ltd United Kingdom Telephone: +44 (0)845 250 0586 www.augustint.com M o d e l N o . : M S 5 1 5 Bluetooth Stereo Speakers Enceintes Stéréo Bluetooth Bluetooth Stereo Lautsprecher Altoparlanti Stereo Bluetooth Altavoces Bluetooth Estéreo EN FR DE IT ES Please fully charge both speakers before first use. To charge, use the USB charging cable to connect both speakers to a powered USB port.Whilst charging, the LED lights red and turns off once fully charged. 1.Use the connecting cable to connect the main and secondary speaker. 2. Switch both speakers on. Note: The main speaker will automatically enter pairing mode, indicated a alternative blue and red strobing LED, if the last used source device is not available. 3. Pair your source device to “MS515” Note: If you are unfamiliar with the Bluetooth feature of your source device, please refer to its user manual for detailed instructions. 4. Once successfully paired and connected, the blue LED starts to flash once per 2 seconds. User Manual -2- -1- English Français Español Quick Start Guide MS515 Thank you for purchasing this August product. This user manual is designed to familiarize you with all the features of this device. Please take the time to read this user manual carefully, even if you are already familiar with a similar product. Safety To ensure the safety of you and others, please read the Safety Instructions before using this device. Please do not disassemble this product, it can be unsafe and will invalidate the manufacturer's warranty. Disposal Please ensure the product and accessories are disposed of in compliance with the WEEE (Waste Electrical and Electronic Equipment) Directive and any other regulations applicable to your country. Always check with the environment agency and any other relevant authorities for current disposal regulations. Customer Service You can contact us by phone on: +44 (0)845 250 0586 or by email at: [email protected] should you require further technical support or customer service. 1. USB Charging Socket 2. 3.5mm Connecting Socket 3. 3.5mm Audio-In Socket 4. Multifunction Switch 5. Power Switch Main (Left) Secondary (Right) 2 1 3 4 5 152 2 2 Contents Storage and Use Do not expose this device to dust, oil or smoke. When transporting this device store securely to avoid impact damage. Do not scratch this device with sharp objects. Do not store or use this device in extreme temperatures. Do not store or use this device in wet or damp environments. Do not drop or strike this device. Maintenance Please unplug all leads before cleaning this device. Wipe the device and buttons with a soft cloth. Never wipe this device with an abrasive cloth or apply detergent, alcohol or chemical based cleaning products. Alcohol 1. Safety Instructions -4- -3- English Français Deutsch Español 1. Safety Instructions.......................................................4 2. Main Features..............................................................5 3. Accessories.................................................................5 4. Part Names and Functions.............................................5 5. Operation....................................................................6 6. Charging.....................................................................9 7. Specification...............................................................9 8. Troubleshooting.........................................................10 9. Warranty....................................................................11 10.. FCC statement. ...........................................................12 4. Part Names and Functions -6- -5- 3. Accessories 123 USB charging cable 2. Main Features English Wireless Audio from any Bluetooth Device Speakers for Stereo Sound on Your Home TV Audio-In Socket for Non Bluetooth Devices Long Life Built-in Rechargeable Batteries 5. Operations Main (Left)Secondary (Right) 5.1 Switch Speakers On/Off The power switch for both the main and secondary speaker is a slider switch located on the rear of each unit. Before switching the speakers on, please ensure that the main and secondary speaker are connected with the provided connecting cable. 5.2 Bluetooth Connection 5.2.1 Connection to the Main Speaker Switch the main speaker on, then press and hold the multifunction switch button until a two tone notification sounds to indicate pairing mode. In pairing mode, the LED will quickly flash blue and red alternatively. For mobile phones 1) Scan for available Bluetooth devices on your mobile phone (see your mobile phone user manual for instructions if needed). 2) Select “MS515” from the available devices. 3) Once successfully paired and connected, the blue LED starts to flash once per 2 seconds. For computers 1) Enable the Bluetooth function on your computer. 2) Select “Devices and Printers” from the Control Panel and click “Add a Device”. 3) Select “MS515” from the available devices, the system will install the driver automatically. 4) Once successfully paired and connected, the blue LED starts to flash once per 2 seconds. For a TV or Set-Top Box with Integrated Bluetooth Connection 1) Scan for available Bluetooth devices on your TV or Set-Top Box (see your TV or Set-Top Box user manual for instructions if needed). 2) Select “MS515” from available devices. 3) Once successfully paired and connected, the blue LED starts to flash once per 2 second. 3.5mm Connecting Cable [Red Band]/3.5 mm Audio Cable User manual M o d e l N o . : M S 5 1 5 B l u e t o o t h S p e a k e r S e t E n s e m b l e d ’ E n c e i n t e s B l u e t o o t h B l u e t o o t h L a u t s p r e c h e r S e t S e t d i A l t o p a r l a n t i B l u e t o o t h S e t d e A l t a v o c e s B l u e t o o t h EN FR DE IT ES 1. USB Charging Socket 2. 3.5mm Connecting Socket 3. 3.5mm Audio-In Socket 4. Multifunction Switch 5. Power Switch 1 3 4 5 2521 English -8- -7- For TV with No Bluetooth Connection To connect to a TV or Set-Top box without a B…

Text truncated - open the document above for the full version.

August International Ltd Swains Mill, Crane Mead, Ware, Herts, SG12 9PY, United Kingdom Tel: +86 0755-23495067 Fax: +86 0755-23495067 DATE 11-27-2015 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AFCM-MS515 Product Name: Computer Speaker Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 11-27-2015 By: Alan Lai Si gnature Printed Title: Manager On behalf of : August International Ltd Telephone: +86 0755-23495067

August International Ltd Swains Mill, Crane Mead, Ware, Herts, SG12 9PY, United Kingdom Tel: +86 0755-23495067 Fax: +86 0755-23495067 Series Models Description FCC ID: 2AFCM-MS515 Date: Nov. 27, 2015 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: To whom concern: The device (Product Name: Computer Speaker) Models Name: MS515, MS450, SE55, MS520, MS630, MS435, MB315, MB500 have same electrical, PCB and BOM, only the model’s name and colour are different for marketing requirements. Sincerely, Alan Lai /Manager SE55, MS520, MS630, MS435, MB315, MB500 are electrically identical ,only the model’s name and color are different for marketing requirements.

August International Ltd Swains Mill, Crane Mead, Ware, Herts, SG12 9PY, United Kingdom Tel: +86 0755-23495067 Fax: +86 0755-23495067 USB Port Statement FCC ID: 2AFCM-MS515 Date: Nov. 27, 2015 To whom it may concern: We, the undersigned, state that the device's (Model: MS515, MS450, SE55, MS520, MS630, MS435, MB315, MB500) USB port only used for charge, no any data transfer to PC. Sincerely, Alan Lai /Manager

BT antenna

RF Exposure evaluation According to 447498 D01 General RF Exposure Guidance v05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison eirp = pt x gt = (EXd) 2 /30 where: pt = transmitter output power in watts, gt = numeric gain of the transmitting antenna (unitless), E = electric field strength in V/m, --- 10 ((dBuV/m)/20) /10 6 d = measurement distance in meters (m)---3m So pt = (EXd) 2 /30 x gt Field strength = 96.59dBuV/m @3m Ant gain 0.5 dBi; so Ant numeric gain=1.122 So pt={[10 (96.59/20) /10 6 x3] 2 /(30x1 .122)}x1000mW = 1.22 mW So ( 1.22 mW/5mm)x √2.441 GHz = 0.4 <3 Then SAR evaluation is not required

Shenzhen CTL Testing Technology Co., Ltd. Tel: +86-755-89486194 Fax: +86-755-26636041 TEST REPORT FOR FCC PART 15 SUBPART C 15.249 Report Reference No. ................. : CTL1511193366-WF Compiled by: ( position+printed name+signature) Jacky Chen (File administrators) Tested by: ( position+printed name+signature) Allen Wang (Test Engineer) Approved by: ( position+printed name+signature) Tracy Qi (Manager) Product Name .............................. : Computer Speaker Model/Type reference ................. : MS515 List Model(s) ................................ : MS450, SE55, MS520, MS630, MS435, MB315, MB500 Trade Mark ................................... : August FCC ID .......................................... : 2AFCM-MS515 Applicant’s name ........................ : August International Ltd Address of applicant .................. : Swains Mill, Crane Mead, Ware, Herts, SG12 9PY, United Kingdom Test Firm ...................................... : Shenzhen CTL Testing Technology Co., Ltd. Address of Test Firm .................. : Floor 1- A, Baisha Technology Park, No.3011, Shahexi Road, Nanshan District, Shenzhen, China 518055 Test specification ........................ : Standard ........................................ : FCC Part 15.249:Operation within the bands 920-928 MHz, 2400-2483.5 MHz, 5725-5850 MHz and 24.0 - 24.25 GHz. TRF Originator .............................. : Shenzhen CTL Testing Technology Co., Ltd. Master TRF ................................... : Dated 2011-01 Date of Receipt ............................ : Nov. 19, 2015 Date of Test Date ......................... : Nov. 19, 2015 - Nov. 24, 2015 Data of Issue ................................ : Nov. 25, 2015 Result ........................................... : Positive Shenzhen CTL Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTL Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTL Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. V1.0 Page 2 of 33 Report No.: CTL1511193366-WF TEST REPORT Test Report No. : CTL1511193366-WF Nov. 25, 2015 Date of issue Equipment under Test : Computer Speaker Model /Type : MS515 Listed Models : MS450, SE55, MS520, MS630, MS435, MB315, MB500 Applicant : August International Ltd Address : Swains Mill, Crane Mead, Ware, Herts, SG12 9PY, United Kingdom Manufacturer : August International Ltd Address : Guohong Mansion, Qinghu Road, Longhua District, Shenzhen, China Test result Pass * In the configuration tested, the EUT complied with the standards specified page 5. The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. V1.0 Page 3 of 33 Report No.: CTL1511193366-WF ** Modified History ** Version DescriptionIssued Data Report No. Remark Version 1.0 Initial Test Report Release2015-11-25 CTL1511193366-WF Tracy Qi V1.0 Page 4 of 33 Report No.: CTL1511193366-WF Table of Contents Page 1.SUMMARY............................................................................................................................................................5 1.1. TESTSTANDARDS.....................................................................................................................................................5 1.2. TESTDESCRIPTION........................................................................................................................................................5 1.3. TESTFACILITY..............................................................................................................................................................6 1.4. STATEMENTOFTHEMEASUREMENTUNCERTAINTY...............................................................................................................6 2. GENERALINFORMATION.......................................................................................................................................7 2.1. ENVIRONMENTALCONDITIONS........................................................................................................................................7 2.2. GENERALDESCRIPTIONOFEUT......................................................................................................................................7 2.3. DESCRIPTIONOFTESTMODESANDTESTFREQUENCY..........................................................................................................8 2.4. EQUIPMENTSUSEDDURINGTHETEST..............................................................................................................................9 2.5. RELATEDSUBMITTAL(S)/GRANT(S).................................................................................................................................9 2.6. MODIFICATIONS...........................................................................................................................................................9 3. TESTCONDITIONSANDRESULTS.........................................................................................................................10 3.1. CONDUCTEDEMISSIONSTEST.......................................................................................................................................10 3.2. RADIATEDEMISSIONSANDBANDEDGE..........................................................................................................................13 3.3. OCCUPIEDBANDWIDTHMEASUREMENT.........................................................................................................................22 3.4. ANTENNAREQUIREMENT............................…

Text truncated - open the document above for the full version.