2AFD2KATCHG2Bluetooth Speaker

IMPORTANT SAFETY INSTRUCTIONS AND NOTES ON RADIO INTERFERENCE CONSIGNES DE SÉCURITÉ IMPORTANTES ET REMARQUES SUR LES INTERFÉRENCES RADIO 重要的安全說明 射頻干擾注意事項 無線干渉の重要な安全に関する注意事項 무선 간섭에 대한 중요 안전 지침 및 고지 사항 DALI 2 IMPORTANT SAFETY INSTRUCTIONS RISK OF ELECTRIC SHOCK DO NOT OPEN RISQUE D’ ÉLECTROCUTION NE PAS OUVRIR CAUTIONATTENTION 1. Read instructions - all the safety and operating instructions should be read before the appliance is operated. 2. Retain instructions - the safety and operating instructions should be retained for future reference. 3. Heed warnings - all warnings on the appliance and in the operating instructions should be adhered to. 4. Follow instructions - all operating and use instructions should be followed. 5. Water and moisture - the appliance should not be used near water - for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool and the like. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus should not be exposed to dripping or splashing. Objects filled with liquids, such as vases should not be placed on the apparatus. 6. Carts and stands - the appliance should be used only with a cart or stand if recommended by the manufacturer. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 7. Ventilation - the appliance should be situated so that its location or position does not interfere with proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet, that may impede the flow of air through the ventilation openings. 8. Heat - the appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. 9. Power sources - the appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 10. Power cord protection - power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed on or against them, paying particular attention to cords at plugs, convenience receptacles and the point where they exit from appliance. 11. Cleaning - do not use any liquid cleaners. Use only a dry cloth to wipe off dust and grease. 3 12. Non-use periods - the power cord of the appliance should be unplugged from the outlet when left unused for a long period of time and during lightning storms. 13. Object and liquid entry - care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 14. Servicing - the user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel. To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. 15. Damage requiring service - the appliance should be serviced by qualified personnel when: a) The power-supply cord or the plug has been damaged; or b) Objects have fallen, or liquid has been spilled into the appliance; or c) The appliance has been exposed to rain; or d) The appliance does not appear to operate normally, or exhibits a marked change in performance; or e) The appliance has been dropped, or the enclosure damaged. 16. Battery heat - do not expose the battery or battery pack to excessive heat such as sunshine, fire or the like. 17. Battery replacement - danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 18. Battery storing - keep new and used batteries away from children. If the battery com partment does not close securely, stop using the product and keep it away from children. 19. Isolation - this equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. 20. Mains disconnection - Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely. This product contains electrical or electronic materials. The presence of these materials may, if not disposed of properly, have potential adverse effects on the environment and human health. Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected separately. As a consumer, you are responsible for ensuring that this product is disposed of properly. 4 FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTES ON RADIO INTERFERENCE Federal Communications Commission interference statement This equipment has been tested and found to comply with the limits for a Class B digital de- vice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate t…

Text truncated - open the document above for the full version.

DALI KATCH G2 MANUAL 2 CONTENTS 1. Introduction ..............................3 2. Getting to know your DALI KATCH G2 .....4 3. Switch ON/OFF...........................5 4. Volume Adjustment........................6 5. Battery Charging..........................7 6. Bluetooth.................................8 7. True Wireless Stereo....................11 8. Sound Modes............................12 9. Wired Connections ......................13 10. Strap Extension..........................14 11. Factory Reset & Firmware Upgrade ......15 12. Cleaning .................................16 13. Disposal .................................16 14. Technical specifications ..................17 3 tttyffflftfiffiffi DALI KATCH G2 QUICK START GUIDE SCAN THE CODE FOR MORE INFO 3 sec EQ-1 EQ-2 1. INTRODUCTION Welcome to the DALI KATCH G2, and thank you for trusting DALI with your portable music. The KATCH G2 takes the features and performance of the original DALI KATCH and brings evolution to bear, with new colours, more battery life, enhanced Bluetooth 5.0 aptX HD wireless performance, and a True Wireless Stereo mode that enables two KATCH G2 speakers to link and play stereo. Some things have no need of change however and the DALI KATCH G2 borrows its predecessor’s stylish Danish design, vivid multi-driver sound, and exceptional build quality. The newly evolved DALI KATCH G2 is the latest word in compact portable music. Your DALI KATCH G2 packaging contains: Universal Mains Charger (1.75 m cable length) Quick Start Guide Mains Charger Plugs Travel Bag 4 7 8 9 2. GETTING TO KNOW YOUR KATCH G2 Mains Charge Input USB Charge Output Socket Stereo Mini-Jack Input Bluetooth Release Power On/Off Indicator Lights Volume Down Volume UpSound Mode Toggle 1 2 3 4 56 5 3. SWITCH ON AND OFF 3.1 Switch ON To switch ON your DALI KATCH G2: 1. Press and hold the Power On/Off button (Button 2 ) until the switch-on sound plays. 2. The indicator lights (Lights 3 ) will illuminate, to show that the KATCH G2 is ready for use. When your DALI KATCH G2 is switched on, the indicator lights (Lights 3 ) show the battery charge state. 3.2 Switch OFF To switch OFF your DALI KATCH G2: 1. Press and hold Power On/Off button (Button 2 ) until the switch-off sound plays. 2. The indicator lights (Lights 3 ) will switch off unless the KATCH G2 is connected to mains power via its charger (See 5.0). If your DALI KATCH G2 remains unused for 20 minutes while running on battery power it will switch off automatically. 2 Power On/Off 3 25% 50% 75% 100% If your KATCH G2 does not switch on, connect it to mains power via its charger (See 4.0). 6 4. VOLUME CONTROL 4.1 Volume Down To reduce the volume of your DALI KATCH G2 press the Volume Down button (Button 4 ). To reduce the volume quickly, press and hold the Volume Down button (Button 4 ). 4.2 Volume Up To increase the volume of your DALI KATCH G2 press the Volume Up button (Button 5 ). To increase the volume quickly, press and hold the Volume Up button (Button 5 ). 4.3 Volume Indications The indicator lights (Lights 3 ) indicate the volume setting. 4 Volume Down 5 Volume Up NOTE When playing Bluetooth audio, as well as adjusting volume with the KATCH G2 buttons, you can also use the volume buttons on your Bluetooth device. 7 5. BATTERY CHARGING To charge the DALI KATCH G2 internal battery, connect the included mains charger to the KATCH G2 (Connector 9 ). Charging will begin as soon as mains power is switched on. The indicator lights (Lights 3 ) will pulse slowly while charging is underway while simultaneously indicating charge state. A full battery charge will take little more than 2 hours. Playing music or using the USB charge output (Connector 7 ) will increase charge time. NOTE Powering the DALI KATCH G2 through the mains charger enables it to play louder and with more energy. This is recommended for optimal performance when playing loud party music. The KATH G2 has class leading battery life but it will vary depending on use. Play your music louder and the battery will drain a little faster. With a fully charged battery your KATCH G2 can play music for up to 30 hours. 8 6. BLUETOOTH 6.1 Pairing To connect a Bluetooth audio device to your DALI KATCH G2: 1. Switch on the KATCH G2 (See 3.1). It will immediately become visible for pairing. 2. Initiate Bluetooth pairing from your audio device settings and select ‘DALI KATCH G2’. 3. When pairing is established, the KATCH G2 Bluetooth pairing sound will play and the indicator lights (Lights 3 ) will illuminate in blue. 3 Indicator Lights NOTE The DALI KATCH G2 employs Bluetooth 5.0 for enhanced range and connection stability, and implements the aptX HD wireless audio codec for optimum sound quality. If a Bluetooth audio device has been previously paired with your DALI KATCH G2 and is within range, the KATCH G2 will automatically reconnect to that device. It is possible for two devices to be paired with your DALI KATCH G2 simultaneously, only one device at a time however will be able to connect and play audio. 9 6. BLUETOOTH 6.2 NFC Pairing DALI KATCH G2 Bluetooth pairing can also be initiated using NFC: 1. Switch on the DALI KATCH G2 (See 3.1). 2. Ensure that NFC is enabled in your Bluetooth audio device. 3. Locate the NFC sensing area of your Bluetooth audio device. 4. Hold the NFC sensing area of the audio device close to the side of your KATCH G2, adjacent to the Power On/Off button (Button 2 ), as shown in the illustration. NOTE NFC is short for Near Field Connection. It employs the same short range mobile technology used for mobile phone payments. NFC Bluetooth pairing is currently available only with Android mobile devices. NFC Power On/Off 2 10 DALI KATCH G2 1DALI KATCH G2 2DALI KATCH G2 3DALI KATCH G2 6. BLUETOOTH 6.3 Bluetooth Release If you are unable to pair a Bluetooth device with your DALI KATCH G2 it is likely that two devices are already paired. In this case: 1. Press and hold the KATCH G2 Bluetooth release button (Button 1 ) unti…

Text truncated - open the document above for the full version.

2021/3/2 Federal Communications Commission Authorization and Evaluation Division ATTESTATION FCC ID: 2AFD2KATCHG2 Product: Bluetooth Speaker Model: KATCH G2 We don’t provide any controls or software to allow operation outside the USA frequency band when we sell a product bearing the FCC ID: 2AFD2KATCHG2 anywhere in the world. Sincerely, ------------------------------------------------------------ Jakob Koed / Engineering and Technology Manager DALI A/S Tel: 4524401476 Fax: 4598551940 Email: [email protected]

FCC ID.: 2AFD2KATCHG2 Date: March 2, 2021 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: Type of Confidentiality Requested Exhibit ☒ Permanent Block Diagrams ☐ Short Term External Photos ☐ Short Term Internal Photos ☒ Permanent Operation Description/Theory of Operation ☐ Permanent Parts List & Placement/BOM ☐ Permanent Tune-Up Procedure ☒ Permanent Schematics ☐ Short Term Test Setup Photos ☐ Short Term User’s Manual The above materials contain trade secrets and proprietary information not customarily Released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Sincerely, ------------------------------------------------------ Name: Jakob Koed Title: Engineering and Technology Manager Company name: DALI A/S

Declaration of Authorization We Name: DALI A/S Address: Dali Alle 1,DK-9610 Norager, Denmark. City: Norager Country: Denmark Declare that: Name Representative of agent: Vincent Lin Agent Company name: DEKRA Testing and Certification Co., Ltd. Address: No.5-22, Ruishukeng, Linkou Dist., City: New Taipei City 24451, Country: Taiwan, R.O.C. is authorized to apply for Certification of the following product(s): Product Name: Bluetooth Speaker Model: KATCH G2 FCC ID: 2AFD2KATCHG2 IC ID: 20427-KATCHG2 Trademark: DALI on our behalf. This is valid until March 2, 2022, or until FCC and IC certification are completed, whichever comes sooner. Date: March 2, 2021 City: Norager Name: Jakob Koed Function: Engineering and Technology Manager Signature:

Report No.: 20A0428R-E3032110108 Page: 1 of 4 Attachment 2 : EUT Detailed Photographs (1) EUT Photo (2) EUT Photo Report No.: 20A0428R-E3032110108 Page: 2 of 4 (3) EUT Photo (4) EUT Photo Report No.: 20A0428R-E3032110108 Page: 3 of 4 (5) EUT Photo (6) EUT Photo Report No.: 20A0428R-E3032110108 Page: 4 of 4 (7) EUT Photo

DALI A/S FCC ID: 2AFD2KATCHG2 Dali Alle 1,DK-9610 Norager, Denmark Tel : 4524401476 FCC ID Label

DALI A/S Dali Alle 1,DK-9610 Norager, Denm ark Tel : 4524401476 FCC ID: 2AFD2KATCHG2 The FCC ID will be placed on the equipment as shown in the photograph below.

Report No.: 20A0428R-E3032110108 Page: 5 of 18 (8) EUT Photo (9) EUT Photo Report No.: 20A0428R-E3032110108 Page: 6 of 18 (10) EUT Photo (11) EUT Photo Report No.: 20A0428R-E3032110108 Page: 7 of 18 (12) EUT Photo (13) EUT Photo NFC Tag Report No.: 20A0428R-E3032110108 Page: 8 of 18 (14) EUT Photo (15) EUT Photo BT Antenna BT module BT Antenna Report No.: 20A0428R-E3032110108 Page: 9 of 18 (16) EUT Photo (17) EUT Photo Report No.: 20A0428R-E3032110108 Page: 10 of 18 (18) EUT Photo (19) EUT Photo Report No.: 20A0428R-E3032110108 Page: 11 of 18 (20) EUT Photo (21) EUT Photo Report No.: 20A0428R-E3032110108 Page: 12 of 18 (22) EUT Photo (23) EUT Photo Report No.: 20A0428R-E3032110108 Page: 13 of 18 (24) EUT Photo (25) EUT Photo Report No.: 20A0428R-E3032110108 Page: 14 of 18 (26) EUT Photo (27) EUT Photo Report No.: 20A0428R-E3032110108 Page: 15 of 18 (28) EUT Photo (29) EUT Photo Report No.: 20A0428R-E3032110108 Page: 16 of 18 (30) EUT Photo (31) EUT Photo Report No.: 20A0428R-E3032110108 Page: 17 of 18 (32) EUT Photo (33) EUT Photo Report No.: 20A0428R-E3032110108 Page: 18 of 18 (34) EUT Photo (35) EUT Photo

Report No.: 20A0428R-E3082100013 Page: 1 of 5 RF Exposure Evaluation Report Product Name : Bluetooth Speaker Model No. : KATCH G2 FCC ID : 2AFD2KATCHG2 Applicant : DALI A/S Address : Dali Alle 1,DK-9610 Norager, Denmark. Date of Receipt : Oct. 19, 2020 Date of Declaration : Feb. 24, 2021 Report No. : 20A0428R-E3082100013 Report Version : V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. Measurement uncertainties evaluated for each testing system and associated connections are given here to provide the system information for reference. Compliance determinations do not take into account measurement uncertainties for each testing system, but are based on the results of the compliance measurement. Report No.: 20A0428R-E3082100013 Page: 2 of 5 Issued Date: Feb. 24, 2021 Report No.: 20A0428R-E3082100013 Product Name Bluetooth Speaker Applicant DALI A/S Address Dali Alle 1,DK-9610 Norager, Denmark. Manufacturer DALI A/S Model No. KATCH G2 FCC ID. 2AFD2KATCHG2 Trade Name DALI Applicable Standard KDB 447498 D01 v06 Minimum test separation distance ≥ 20 cm For low power devices Test Result Complied Documented By : ( Senior Adm. Specialist / Jinn Chen ) Tested By : ( Senior Engineer / Wen Lee ) Approved By : ( Director / Vincent Lin ) Report No.: 20A0428R-E3082100013 Page: 3 of 5 Revision History Report No. Ve r s i o n Description Issued Date 20A0428R-E3082100013 V1.0 Initial issue of report. Feb. 24, 2021 Report No.: 20A0428R-E3082100013 Page: 4 of 5 1. GENERAL INFORMATION 1.1. EUT Description Product Name Bluetooth Speaker Trade Name DALI Model No. KATCH G2 FCC ID. 2AFD2KATCHG2 Frequency Range 2402 – 2480MHz Channel Number 79CH Type of Modulation FHSS: GFSK(1Mbps) /π/4DQPSK(2Mbps) / 8DPSK(3Mbps) Antenna Type Internal Antenna Antenna Gain Refer to the table “Antenna List” 1.2. Antenna List No. Manufacturer Part No. Antenna Type Peak Gain 1 Meiloon Industrial Co., Ltd. RF-TRSPIPAD Internal Antenna 2.03dBi for 2.4 GHz Report No.: 20A0428R-E3082100013 Page: 5 of 5 2. RF Exposure Evaluation 2.1. Standard Applicable According to 1.1307 (b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. 2.2. Measurement Result: According to KDB Publication 447498 D01, section 4.3.1, per the calculations of item 1 (Power(mW)/separation (mm)*sqrt(f(GHz)≤3.0), SAR is required as shown in the table below where calculated values are greater than 3.0: Operation frequency = 2450MHz and antenna separation distance = 5mm, Body SAR Test Exclusion Threshold = 10mW Frequency Band (MHz) Maximum Peak output power Peak Gain: 2.03 dBi SAR Test Exclusion Threshold Calculated Threshold Value (≦3.0 SAR is not required) Conducted (dBm) EIRP (dBm) EIRP (mW) (mW) 2402 1.53 3.56 2.27 10 0.704 Note1: The SAR/MPE measurement is not necessary. Note2: The conducted output power is refer to report No.: 20A0428R-E3032110108 from the DEKRA.

Report No.: 20A0428R-E3032110108 Page: 1 of 73 FCC Test Report Product Name Bluetooth Speaker Model No. KATCH G2 FCC ID. 2AFD2KATCHG2 Applicant DALI A/S Address Dali Alle 1,DK-9610 Norager, Denmark. Date of Receipt Oct. 19, 2020 Issued Date Jan. 18, 2021 Report No. 20A0428R-E3032110108 Report Version V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. Measurement uncertainties evaluated for each testing system and associated connections are given here to provide the system information for reference. Compliance determinations do not take into account measurement uncertainties for each testing system, but are based on the results of the compliance measurement. Report No.: 20A0428R-E3032110108 Page: 2 of 73 Test Report Issued Date: Jan. 18, 2021 Report No.: 20A0428R-E3032110108 Product Name Bluetooth Speaker Applicant DALI A/S Address Dali Alle 1,DK-9610 Norager, Denmark. Manufacturer DALI A/S Model No. KATCH G2 FCC ID. 2AFD2KATCHG2 EUT Rated Voltage AC 100-240V / 50-60Hz or DC 7.27V(Power by Battery) EUT Test Voltage AC 120V / 60Hz Trade Name DALI Applicable Standard FCC CFR Title 47 Part 15 Subpart C ANSI C63.4: 2014, ANSI C63.10: 2013 Test Result Complied Documented By : ( Senior Adm. Specialist / Jinn Chen ) Tested By : ( Senior Engineer / Yulin Chen ) Approved By : ( Director / Vincent Lin ) Report No.: 20A0428R-E3032110108 Page: 3 of 73 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION ............................................................................................................... 6 1.1. EUT Description ...................................................................................................................................... 6 1.2. Tested System Details .............................................................................................................................. 8 1.3. Configuration of Tested System .............................................................................................................. 8 1.4. EUT Exercise Software ........................................................................................................................... 8 1.5. Test Facility ............................................................................................................................................. 9 1.6. List of Test Equipment ........................................................................................................................... 10 1.7. Uncertainty ............................................................................................................................................ 11 2. CONDUCTED EMISSION ................................................................................................................ 12 2.1. Test Setup .............................................................................................................................................. 12 2.2. Limits ..................................................................................................................................................... 12 2.3. Test Procedure ....................................................................................................................................... 12 2.4. Test Result of Conducted Emission ....................................................................................................... 13 3. PEAK POWER OUTPUT .................................................................................................................. 15 3.1. Test Setup .............................................................................................................................................. 15 3.2. Limit ...................................................................................................................................................... 15 3.3. Test Procedure ....................................................................................................................................... 15 3.4. Test Result of Peak Power Output ......................................................................................................... 16 4. RADIATED EMISSION ..................................................................................................................... 18 4.1. Test Setup .............................................................................................................................................. 18 4.2. Limits ..................................................................................................................................................... 19 4.3. Test Procedure ....................................................................................................................................... 20 4.4. Test Result of Radiated Emission .......................................................................................................... 21 5. RF ANTENNA CONDUCTED TEST ................................................................................................ 35 5.1. Test Setup .............................................................................................................................................. 35 5.2. Limits ..................................................................................................................................................... 35 5.3. Test Procedure ....................................................................................................................................... 35 5.4. Test Result of RF Antenna C…

Text truncated - open the document above for the full version.

Report No.: 20A0428R-E3032110108 Page : 1 of 3 Attachment 1: EUT Test Setup Photographs Front View of Conducted Test Back View of Conducted Test Report No.: 20A0428R-E3032110108 Page : 2 of 3 Front View of Radiated Test Back View of Radiated Test Report No.: 20A0428R-E3032110108 Page : 3 of 3 Front View of Radiated Test (Horn) Back View of Radiated Test (Horn)