2AFH7NLP2024003NLP Receiver

NLP2024003 FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IC Warning This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . Son fonctionnement est soumis aux deux conditions suivantes : ( 1 ) Ce dispositif ne peut causer d'interférences ; et ( 2 ) Ce dispositif doit accepter toute interférence , y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil. Ce matériel est complété par une exposition de rayonnements ISED pour un environnement naturel. Ce matériel doit être installé et se faire avec une distance minimale de 20cm entre les radiateurs et les autresYour body shop.

NLP2024004 IC Warning This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . Son fonctionnement est soumis aux deux conditions suivantes : ( 1 ) Ce dispositif ne peut causer d'interférences ; et ( 2 ) Ce dispositif doit accepter toute interférence , y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil. Ce matériel est complété par une exposition de rayonnements ISED pour un environnement naturel. Ce matériel doit être installé et se faire avec une distance minimale de 20cm entre les radiateurs et les autresYour body shop. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD Address: 12 East Zhenxing Road, Linping, Yuhang, Hangzhou, 311100, China Product Name: NLP Receiver FCC ID: 2AFH7NLP2024003 Model(s): NLP2024003, NLP2024004 2.911(d)(5)(i) Equipment Type We, [HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD] (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Ye Jigai Date:2024.03.14 Title and Company name: GM/ HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD Address: 12 East Zhenxing Road, Linping, Yuhang, Hangzhou, 311100, China Product Name: NLP Receiver FCC ID: 2AFH7NLP2024003 Model(s): NLP2024003, NLP2024004 2.911(d)(5)(ii) Applicant filing We, [HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Ye Jigai Date:2024.03.14 Title and Company name: GM/ HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD 2.911 (d)(5)(ii) Applicant Attestation v1.3

Hamaton Inc 2.911 (d)(7)USA Agent v1.5 Section 2.911(d)(7) USA Agent for Service of Process Company name: HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD Address: 12 East Zhenxing Road, Linping, Yuhang, Hangzhou, 311100, China Product Name: NLP Receiver FCC ID: 2AFH7NLP2024003 Model(s): NLP2024003, NLP2024004 2.911(d)(7) USA Designated Agent for Service of Process We, [HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD] (“the applicant”) designate [Hamaton Inc] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Hamaton Inc USA Address: 47815 West Road, Suite D109, Wixom, MI 48393, United States FRN Number: 0035150564 Contact Name: Enri Osmani Telephone No: (248) 914-0597 Email: [email protected] Applicant Company name: HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD Address: 12 East Zhenxing Road, Linping, Yuhang, Hangzhou, 311100, China Grantee FRN Number: 0024780280 FCC Grantee Code: 2AFH7 Contact Name: Ye Jigai Telephone No: 86-571-86159905 Email: [email protected] Signature: Title: Vice President Signature: Title:GM Date:2024.03.29 Date:2024.03.29 Hamaton Inc 2.911 (d)(7)USA Agent v1.5 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against- national-security-threats-to-the-communications-supply-chain-through-the

HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD Agent Authorization Company: HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD Address: 12 East Zhenxing Road, Linping, Yuhang, Hangzhou, 311100, China Product Name: NLP Receiver Model Number(s): NLP2024003, NLP2024004 Product Description: NLP Receiver We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2024-03-14 Name: Ye Jigai Title: GM Company: HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD

HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD Authorization Letter We, (the approval holder) Company name HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD Addresss 12 East Zhenxing Road, Linping, Yuhang, Hangzhou, 311100, China declare that the following representative (agent): Name (person) Bovey Yang Company name Shenzhen STS Test Services Co., Ltd. Addresss 101, Building B, Zhuoke Science Park, No.190 Chongging Road, ZhanChengShequ, Fuhai Sub- District, Baoan District, Shenzhen, Guangdong, China City Shenzhen Country China to act on our behalf on all matters concerning the application and documents submitted to Micom Labs for product certification below Product Description NLP Receiver Type or Model(s) NLP2024003, NLP2024004 Tradename or Brand(s) Hamaton Attestation: City: Date: Name: (this must be a person) Function: Signature: (or official company stamp) China 2024.03.14 Ye Jigai GM

HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024.03.14 Subject; Request for Confidentiality FCC ID: 2AFH7NLP2024003 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Date: 2024.03.14 Name: Ye Jigai Title: GM Company: HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD

Differences Description We HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD state: Product： NLP Receiver Model Name： NLP2024003, NLP2024004 Brand Name： Hamaton FCC ID： 2AFH7NLP2024003 Both of models have the same circuit schematic, construction, PCB Lavout and critical components. The difference of Install different car models. Sincerely, Company: HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD Title: GM E-mail: [email protected] Name: Ye Jigai Signature

HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD Responsibility Declaration Letter v1.0 Responsibility Declaration Letter Company name: HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD Address: 12 East Zhenxing Road, Linping, Yuhang, Hangzhou, 311100, China Product Name: NLP Sensor FCC ID: 2AFH7NLP2024003 Model(s): NLP2024003, NLP2024004 Model(s) Difference Description: Both of models have the same circuit schematic, construction, PCB Lavout and critical components. The difference of Install different car models. We, [HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD], hereby acknowledge that all the product information (including all original, drafted, or modified documents) provided to the TCB either by us or our agent or representative(s) for the purposes of FCC certification will meet FCC regulations and requirements; and that any modifications or changes made as a result of TCB review of the documents will be formally implemented into the manufacturing process and product documentation shipped with equipment. We also confirm that all information provided is legitimate and does not contain any false content such as forgery, fabrication, alteration, tampering and concealment. We assume all economic and legal responsibilities in matters that may arise as a result of disclosure on sample products and associated product documentation provided for product certification that may subsequently be found to be a mis-representation of the final product and accompanying documentation when produced, marketed, or sold in the United States, Canada, or anywhere in the world. Your sincerely, Name: Ye Jigai Date: 2024-03-14 Title and Company name: GM/ HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD Responsibility Declaration Letter v1.0 Signature of ISED holder (Include Title, Company name, date, and official company stamp):

FCC Software Configuration Control Declaration Rev1.1.docx HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD FCC Software Configuration Control Declaration Date: 2024-03-14 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD Product Name: NLP Sensor Model Number(s): NLP2024003, NLP2024004 FCC ID: 2AFH7NLP2024003 Regarding FCC Country Code Selection guidelines identified in KDB 594280. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Signature: Date: 2024.03.14 Name: Ye Jigai Title: GM Company: HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD

Page 1 of 3 Report No.: STS2401162 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model:NLP2024003&NLP2024004 Photo 1 Photo 2 Page 2 of 3 Report No.: STS2401162 Photo 3 Photo 4 Page 3 of 3 Report No.: STS2401162 Photo 5 Photo 6

Label FCC ID:2AFH7NLP2024003 IC:20466-NLP2024003 HVIN

Page 1 of 2 Report No.: STS2401162 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model: NLP2024003&NLP2024004 Photo 1 Photo 2 Page 2 of 2 Report No.: STS2401162 Photo 3 Photo 4 BLE ANTENNA

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. Radio Test Report Report No.: STS2401162H01 Issued for HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD 12 East Zhenxing Road, Linping, Yuhang, Hangzhou, 311100, China Product Name: NLP Receiver Brand Name: Hamaton Model Name: NLP2024003 Series Model(s): NLP2024004 FCC ID: 2AFH7NLP2024003 Test Standard: FCC 47CFR §2.1091 Page 2 of 10 Report No.: STS2401162H01 TEST REPORT Applicant’s Name ................. : HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD Address ................................. : 12 East Zhenxing Road, Linping, Yuhang, Hangzhou, 311100, China Manufacturer's Name ........... : HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD Address ................................. : 12 East Zhenxing Road, Linping, Yuhang, Hangzhou, 311100, China Product Description Product Name ........................ : NLP Receiver Brand Name .......................... : Hamaton Model Name .......................... : NLP2024003 Series Model(s) ...................... : NLP2024004 Test Standards ..................... : FCC 47CFR §2.1091 447498 D04 Interim General RF Exposure Guidance v01 The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ...................... : 26 Jan. 2024 Date (s) of performance of tests ............. : 26 Jan. 2024 ~ 02 Feb. 2024 Date of Issue .......................................... : 02 Feb. 2024 Test Result .............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Chris Chen) Authorized Signatory : (Bovey Yang) Page 3 of 10 Report No.: STS2401162H01 TABLE OF CONTENTS 1. GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST FACTORY 6 2. FCC 47CFR §2.1091 REQUIREMENT 7 2.1 TEST STANDARDS 7 2.2 LIMIT 7 2.3 TEST RESULT 10 Page 4 of 10 Report No.: STS2401162H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 02 Feb. 2024 STS2401162H01 ALL Initial Issue Page 5 of 10 Report No.: STS2401162H01 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name NLP Receiver Brand Name Hamaton Model Name NLP2024003 Series Model(s) NLP2024004 Model Difference Both of models have the same circuit schematic, construction, PCB Lavout and critical components. The difference of Install different car models. Product Description The EUT is NLP Receiver Operation Frequency: 2402~2480 MHz Modulation Type: GFSK Antenna gain: BLE:4.6dBi Antenna Designation: Metal antenna Rating Input: DC 24V Hardware Version V1.0 Software Version 5E Page 6 of 10 Report No.: STS2401162H01 1.2 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 Page 7 of 10 Report No.: STS2401162H01 2. FCC 47CFR §2.1091 REQUIREMENT 2.1 TEST STANDARDS Follow the maximum permissible exposure (MPE) limits specified in 447498 D04 Interim General Radio Frequency Exposure Guidelines v01. The gain of the antenna used in the product was extracted from the supplied antenna data sheet and the maximum total power input to the antenna was also measured. Calculate the distance from the product to the MPE limit by the formula. 2.2 LIMIT For single RF sources (i.e., any single fixed RF source, mobile device, or portable device, as defined in paragraph (b)(2) of this section): A single RF source is exempt if: (A) The available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption may not be used in conjunction with other exemption criteria other than those in paragraph (b)(3)(ii)(A) of Part 1.1307. Medical implant devices may only use this exemption and that in paragraph (b)(3)(ii)(A); (B) Or the available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold Pth (mW) described in the following formula. This method shall only be used at separation distances (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by: Page 8 of 10 Report No.: STS2401162H01 (C) Or using below table and the minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. For the exemption in Table 1 to apply, R must be at least λ/2π, where λ is the free-space operating wavelength in meters. If the ERP of a single RF source is not easily obtained, then the available maximum time-averaged power may be used in lieu of ERP if the physical dimensions of the radiating structure(s) do not exceed the electrical length of λ/4 or if the antenna gain is less than that of a half-wave dipole (1.64 linear value). RF Source frequency (MHz) Threshold ERP(watts) 0.3-1.34 1,920 R 2 . 1.34-30 3,450 R 2 /f 2 . 30-300 3.83 R 2 . 300-1,500 0.0128 R 2 f. 1,500-100,000 19.2R 2 . Page 9 of 10 Report No.: STS2401162H01 For multiple RF sources: Multiple RF sources are exempt if: (A) The available maximum time-averaged power of each source is no more than 1 mW and there is a separation distance of two centimeters between any portion of a radiating structure operating and the nearest portion of any other radiating structure in the same device, except if the sum of multiple sources is less than 1 mW during the time-averaging period, in which case they may be treated as a single source (separation is not required). This exemption may not be …

Text truncated - open the document above for the full version.

"ShanghaiATBLTechnologyCo.,Ltd."herebycertifiesthatthetestresultsdescribedinthecompany'sstandardtestsitetestreportandthestructureofthetestequipmentarerecorded indetailbasedontheactualtestsituation.Thetestresultsofthisreportareonlyapplicabletotheabove-mentionedtestedprototypesandtheequipmentdescribedinthereport.This reportisnotallowedtobecopiedwithoutthewrittenconsentofShanghaiATBLTechnologyCo., Ltd.;ShanghaiATBLTechnologyCo.,Ltd. Building8,No.160Bashengroad,WaigaoqiaoFreeTradeZone,PudongNewArea,Shanghai Tel:+86(0)21-51298625Web:www.atbl-lab.com OTATESTREPORT ClientInformation: Applicant ................................... : Address add .............................: , ProductName..........................: ModelName ............................. : DateofTest.................................. .............:14Sep.2023 DateofIssue ............................... .............. : 14Sep.2023 ReportPreparedby: (qiyaozhao) ReportApprovedby: (leoLi) AuthorizedSignatory: (kaiser_tong) HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD 12 East Zhenxing Road, Linping, Yuhang, Hangzhou, 311100, China NLP Receiver Antenna A1 ShanghaiATBLTechnologyCo.,Ltd. Page2of17ReportNo.:SHATBL2209009 TableofContents RevisionHistory----------------------------------------------------------------------------------------------------------3 1.Samplephoto----------------------------------------------------------------------------------------------------------4 2.Testlayout-----------------------------------------------------------------------------------------------------------------5 3.ResultsSummary------------------------------------------------------------------------------------------------------6 4.RadiationPattern/Efficiency----------------------------------------------------------------------------------------7 ShanghaiATBLTechnologyCo.,Ltd. Page3of17ReportNo.:SHATBL2209009 RevisionHistory Rev.IssueDateReportNo.EffectPageContents 00 15Sep.2022 SHATBL2209009ALLInitialIssue ShanghaiATBLTechnologyCo.,Ltd. Page4of17ReportNo.:SHATBL2209009 1.Samplephoto ShanghaiATBLTechnologyCo.,Ltd. Page5of17ReportNo.:SHATBL2209009 2.Testlayout ShanghaiATBLTechnologyCo.,Ltd. Page6of17ReportNo.:SHATBL2209009 3.ResultsSummary Overview 4.6 4.3 4.3 4.6 3.9 3.9 4.0 4.0 4.1 4.0 4.1 4.2 ShanghaiATBLTechnologyCo.,Ltd. Page6of17ReportNo.:SHATBL2209009 4.RadiationPattern/Efficiency 2.40GHz ShanghaiATBLTechnologyCo.,Ltd. Page8of17ReportNo.:SHATBL2209009 2.41GHz ShanghaiATBLTechnologyCo.,Ltd. Page9of17ReportNo.:SHATBL2209009 2.42GHz ShanghaiATBLTechnologyCo.,Ltd. Page10of17ReportNo.:SHATBL2209009 2.43GHz ShanghaiATBLTechnologyCo.,Ltd. Page11of17ReportNo.:SHATBL2209009 2.44GHz ShanghaiATBLTechnologyCo.,Ltd. Page12of17ReportNo.:SHATBL2209009 2.45GHz ShanghaiATBLTechnologyCo.,Ltd. Page13of17ReportNo.:SHATBL2209009 2.46GHz ShanghaiATBLTechnologyCo.,Ltd. Page14of17ReportNo.:SHATBL2209009 2.47GHz ShanghaiATBLTechnologyCo.,Ltd. Page15of17ReportNo.:SHATBL2209009 2.48GHz ShanghaiATBLTechnologyCo.,Ltd. Page16of17ReportNo.:SHATBL2209009 2.49GHz ShanghaiATBLTechnologyCo.,Ltd. Page17of17ReportNo.:SHATBL2209009 2.50GHz

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.:STS2401162W01 Issued for HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD 12 East Zhenxing Road, Linping, Yuhang, Hangzhou, 311100, China Product Name: NLP Receiver Brand Name: Hamaton Model Name: NLP2024003 Series Model(s): NLP2024004 FCC ID: 2AFH7NLP2024003 Test Standards: FCC Part15.247 Page 2 of 55 Report No.: STS2401162W01 TEST REPORT Applicant’s Name ..................: HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD Address ..................................: 12 East Zhenxing Road, Linping, Yuhang, Hangzhou, 311100, China Manufacturer's Name ...........: HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD Address ..................................: 12 East Zhenxing Road, Linping, Yuhang, Hangzhou, 311100, China Product Description Product Name .........................: NLP Receiver Brand Name ...........................: Hamaton Model Name ...........................: NLP2024003 Series Model(s) .....................: NLP2024004 Test Standards ......................: FCC Part15.247 Test Procedure .......................: ANSI C63.10-2013 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ............................................ : Date of receipt of test item ...................... : 26 Jan. 2024 Date (s) of performance of tests ............. : 26 Jan. 2024 ~ 02 Feb. 2024 Date of Issue ........................................... : 02 Feb. 2024 Test Result ............................................... : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Chris Chen) Authorized Signatory: (Bovey Yang) Page 3 of 55 Report No.: STS2401162W01 Table of Contents 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 9 2.3 TEST SOFTWARE AND POWER LEVEL 9 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 2.5 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 11 2.6 EQUIPMENTS LIST …

Text truncated - open the document above for the full version.