2AFIW-MT3600BEBE3600 Dual-band Wi-Fi 7 Travel Router

GL Technologies（Hong Kong）Limited Doc nr. CERTIFICATIONS CONCERNING “COVERED” EQUIPMENT Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 2025.12.03 FCC ID: 2AFIW-MT3600BE To Whom It May Concern: As required by section 2.911(d)(5)(i), [GL Technologies（Hong Kong）Limited] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. GL Technologies（Hong Kong）Limited certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). As required by section 2.911(d)(5)(ii), [GL Technologies（Hong Kong）Limited] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Thank you for your attention to this matter. Sincerely yours, Signature Printed Name: Alfie Zhao Company: GL Technologies（Hong Kong）Limited Job Title: Manager Email: [email protected] Telephone: (+852) 60962240

Rev 1/26/2023 GL Technologies（Hong Kong）Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 12-03-2025 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2AFIW-MT3600BE Applicant FRN: 0024785636 GL Technologies (Hong Kong) Limited (“the applicant”) certifies that, as of the date of the filing of the application, GL Intelligence, Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. GL Technologies (Hong Kong) Limited accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. GL Intelligence, Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: GL Intelligence, Inc. U.S. Agent FRN: 0033649344 Address: 651 N. Broad Street, Suite 206, Middletown, DELAWARE, 19709,USA Contact Person: Alfie Zhao Tel.: 7608136789 Email: [email protected] Sincerely, GL Technologies (Hong Kong) Limited GL Intelligence, Inc. Alfie Zhao [Insert U.S. Agent printed name] Alfie Zhao [Insert Applicant signature] [U.S. Agent signature]

RF_160_05 Declaration of Authorisation Date of issue 02-01-2023 (GL Technologies（Hong Kong）Limited ) Declaration of Authorization We Name: GL Technologies（Hong Kong）Limited Address: Unit 601, Building 5W, Hong Kong Science Park, Shatin, N.T., City: Hong Kong Country: Declare that: Name Representative of agent: Ms. Rose Liu (1) Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country China is authorized to apply for Certification of the following product(s): Product description: BE3600 Dual-band Wi-Fi 7 Travel Router Type designation: GL-MT3600BE Trademark: Validity/ expiry date: 2026-12-03 on our behalf. Date: 2025-12-03 City: Hong Kong Name: Alfie Zhao Function: [email protected] Signature: . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 02-01-2022 RF_501, Issue 10 Company Name:GL Technologies（Hong Kong）Limited Address: Unit 601, Building 5W, Hong Kong Science Park, City: Shatin, N.T., Country: Hong Kong To: Kiwa Netherlands B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: 2AFIW-MT3600BE Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Date: 2025-12-03 Name and signature of applicant: Alfie Zhao Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should state in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Kiwa NL B.V. at least 7 days before date of actual marketing or before expiration of the STC period

GL Technologies（Hong Kong）Limited Wi-Fi Channel 12 and 13 Declaration Letter Date: 2025-12-03 We, the undersigned company Company Name: GL Technologies（Hong Kong）Limited Address: Unit 601, Building 5W, Hong Kong Science Park, Shatin, N.T., Hong Kong Declare that: Product description: BE3600 Dual-band Wi-Fi 7 Travel Router Type designation: GL-MT3600BE Brand: FCC ID: 2AFIW-MT3600BE Only channels 1~11 will be used in USA. Country code selection is disabled. If you have any questions regarding the authorization, please do not hesitate to contact us, thank you~ Sincerely, Signature: ________________________ Name: Alfie Zhao Tel: (+852) 60962240 Email: [email protected]

Project No.: 2510C192 Page 2 of 20 Project No.: 2510C192 Page 3 of 20 Project No.: 2510C192 Page 4 of 20 Project No.: 2510C192 Page 5 of 20 Project No.: 2510C192 Page 6 of 20 Project No.: 2510C192 Page 7 of 20 Project No.: 2510C192 Page 8 of 20 Project No.: 2510C192 Page 9 of 20

60mm 20mm 英文贴纸 WIFI:S:GL-MT3600BE-84a;T:WPA;P:SX78EXIH97;MAC:79:D1:87:EB:79:1D 201-250799 BE3600 Dual-band Wi-Fi 7 Travel Router Use Indoor only for W52W53 MAC: E4:95:6E:40:00:00 S/N: 20doflgir8t92odf Device ID: cl01000 Model: GL-MT3600BE FCC ID: 2AFIW-MT3600BE IC: 23019-MT3600BE IP: 192.168.8.1 SSID: GL-MT3600BE-001 Key: XXXXXXXXXX Input: 5V 3A/9V 3A/12V 2.5A

Project No.: 2510C192 Page 1 of 20 ATTACHMENT PHOTOGRAPHS OF EUT Project No.: 2510C192 Page 10 of 20 2.4G&5G Ant.1 2.4G&5G Ant.2 5G Ant.3 Project No.: 2510C192 Page 11 of 20 Project No.: 2510C192 Page 12 of 20 Project No.: 2510C192 Page 13 of 20 Project No.: 2510C192 Page 14 of 20 Project No.: 2510C192 Page 15 of 20

Project No.: 2510C192 Page 16 of 20 Project No.: 2510C192 Page 17 of 20 Project No.: 2510C192 Page 18 of 20 Project No.: 2510C192 Page 19 of 20 Project No.: 2510C192 Page 20 of 20

Report No.: BTL-FCCP-4-2510C192 Report Version: R00 Page 1 of 4 FCC RF EXPOSURE REPORT FCC ID: 2AFIW-MT3600BE Project No. : 2510C192 Equipment : BE3600 Dual-band Wi-Fi 7 Travel Router Brand Name : Test Model : GL-MT3600BE Model Name : GL-MT3600BE Hardware Version : v1.0 Software Version : 4.8.4 Applicant : GL Technologies（Hong Kong）Limited Address : Unit 601, Building 5W, Hong Kong Science Park, Shatin, N.T., Hong Kong Manufacturer : GL Technologies（Hong Kong）Limited Address : Unit 601, Building 5W, Hong Kong Science Park, Shatin, N.T., Hong Kong Factory : Shenzhen Guanglianzhitong Tech Co.，Ltd. Address : Room 305-306, Skyworth Digital Bulding, Songbai Road, Shiyan Street, Baoan District, Shenzhen, China Date of Receipt : Oct. 22, 2025 Date of Test : Oct. 23, 2025 ~ Nov. 25, 2025 Issued Date : Dec. 03, 2025 Test Sample : Engineering Sample No.: DG920251022137 & DG920251022129 Standard(s) : FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 FCC Title 47 Part 2.1091 & KDB 447498 D01 v06 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. (Dongguan) Prepared by : Terry Deng Approved by : Chay Cai No.3, Jinshagang 1st Road, Dalang, Dongguan, Guangdong People’s Republic of China. Tel: +86-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-4-2510C192 Report Version: R00 Page 2 of 4 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-4-2510C192 R00 Original Report. Dec. 03, 2025 Valid Report No.: BTL-FCCP-4-2510C192 Report Version: R00 Page 3 of 4 1. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna 2. ANTENNA SPECIFICATION For 2.4GHz: Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A PCB IPEX 2.63 2 N/A PCB IPEX 2.70 Note: (1) This EUT supports MIMO (except IEEE 802.11b and IEEE 802.11g modes), and all antenna gains are not equal, Directional gain = G ANT +Array Gain. For power measurements, Array Gain=0dB (N ANT ≤4), so the Directional gain=2.70. For power spectral density measurements, N ANT =2, N SS = 1. So the Directional gain=G ANT +Array Gain=G ANT +10log(N ANT / N SS )dBi=2.70+10log(2/1)dBi=5.71. (2) The antenna gain is provided by the manufacturer. For 5GHz: Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A PCB IPEX 3.22 2 N/A PCB IPEX 3.24 3 N/A PCB IPEX 3.49 Note: (1) This EUT supports MIMO (except IEEE 802.11a mode), and all antenna gains are not equal, Directional gain = G ANT +Array Gain. For power measurements, Array Gain=0dB (N ANT ≤4), so the Directional gain=3.49. For power spectral density measurements, N ANT =3, N SS = 1. So the Directional gain=G ANT +Array Gain=G ANT +10log(N ANT / N SS )dBi=3.49+10log(3/1)dBi=8.26. (2) The antenna gain is provided by the manufacturer. Report No.: BTL-FCCP-4-2510C192 Report Version: R00 Page 4 of 4 3. CALCULATED RESULT For 2.4GHz: Directional Gain (dBi) Directional Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 2.70 1.8621 24.29 268.5344 0.0995 1 Complies For 5GHz: Directional Gain (dBi) Directional Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 3.49 2.2336 29.89 974.9896 0.4332 1 Complies For the max simultaneous transmission MPE: Ratio Total Limit of Ratio Test Result 2.4GHz 5GHz 0.0995 0.4332 0.5327 1 Complies Note: (1) The calculated distance is 20 cm. (2) Ratio=Power Density (S) (mW/cm 2 )/Limit of Power Density (S) (mW/cm 2 ) End of Test Report

Report No.:BTL-FCCP-1-2510C192 Report Version: R01 Page 1 of 100 FCC Radio Test Report FCC ID: 2AFIW-MT3600BE This report concerns: Original Grant Project No. : 2510C192 Equipment : BE3600 Dual-band Wi-Fi 7 Travel Router Brand Name : Model Name : GL-MT3600BE Applicant : GL Technologies（Hong Kong）Limited Address : Unit 601, Building 5W, Hong Kong Science Park, Shatin, N.T., Hong Kong Manufacturer : GL Technologies（Hong Kong）Limited Address : Unit 601, Building 5W, Hong Kong Science Park, Shatin, N.T., Hong Kong Factory : Shenzhen Guanglianzhitong Tech Co.，Ltd. Address : Room 305-306, Skyworth Digital Bulding, Songbai Road, Shiyan Street, Baoan District, Shenzhen, China Date of Receipt : Oct. 22, 2025 Date of Test : Oct. 23, 2025 ~ Dec. 16, 2025 Issued Date : Dec. 18, 2025 Test Sample : Engineering Sample No.: DG920251022137 for power (IEEE 802.11b and IEEE 802.11g modes) and Bandwidth, DG920251022129 for other conducted, DG920251022130 for radiated 1-18GHz, DG920251022127 for others. Standard(s) : FCC CFR Title 47, Part 15, Subpart C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. (Dongguan) Prepared by : Terry Deng Approved by : Chay Cai No.3, Jinshagang 1st Road, Dalang, Dongguan, Guangdong People’s Republic of China. Te l : + 8 6-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.:BTL-FCCP-1-2510C192 Report Version: R01 Page 2 of 100 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. The report must not be used by the client to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025: 2017 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.:BTL-FCCP-1-2510C192 Report Version: R01 Page 3 of 100 Table of Contents Page REVISION HISTORY 6 1 . APPLICABLE STANDARDS 7 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 2.3 TEST ENVIRONMENT CONDITIONS 9 3 . GENERAL INFORMATION 10 3.1 GENERAL DESCRIPTION OF EUT 10 3.2 DESCRIPTION OF TEST MODES 12 3.3 PARAMETERS OF TEST SOFTWARE 13 3.4 DUTY CYCLE 14 3.5 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 16 3.6 SUPPORT UNITS 16 3.7 CUSTOMER INFORMATION DESCRIPTION 16 4 . AC POWER LINE CONDUCTED EMISSIONS 17 4.1 LIMIT 17 4.2 TEST PROCEDURE 17 4.3 DEVIATION FROM TEST STANDARD 17 4.4 TEST SETUP 18 4.5 EUT OPERATION CONDITIONS 18 4.6 TEST RESULTS 18 5 . RADIATED EMISSIONS 19 5.1 LIMIT 19 5.2 TEST PROCEDURE 20 5.3 DEVIATION FROM TEST STANDARD 21 5.4 TEST SETUP 21 5.5 EUT OPERATION CONDITIONS 23 5.6 TEST RESULTS - 9 KHZ TO 30 MHZ 23 5.7 TEST RESULTS - 30 MHZ TO 1000 MHZ 23 5.8 TEST RESULTS - ABOVE 1000 MHZ 23 6 . BANDWIDTH 24 6.1 LIMIT 24 Report No.:BTL-FCCP-1-2510C192 Report Version: R01 Page 4 of 100 Table of Contents Page 6.2 TEST PROCEDURE 24 6.3 DEVIATION FROM STANDARD 24 6.4 TEST SETUP 24 6.5 EUT OPERATION CONDITIONS 24 6.6 TEST RESULTS 24 7 . MAXIMUM OUTPUT POWER 25 7.1 LIMIT 25 7.2 TEST PROCEDURE 25 7.3 DEVIATION FROM STANDARD 25 7.4 TEST SETUP 25 7.5 EUT OPERATION CONDITIONS 25 7.6 TEST RESULTS 25 8 . CONDUCTED SPURIOUS EMISSIONS 26 8.1 LIMIT 26 8.2 TEST PROCEDURE 26 8.3 DEVIATION FROM STANDARD 27 8.4 TEST SETUP 27 8.5 EUT OPERATION CONDITIONS 27 8.6 TEST RESULTS 27 9 . POWER SPECTRAL DENSITY 28 9.1 LIMIT 28 9.2 TEST PROCEDURE 28 9.3 DEVIATION FROM STANDARD 28 9.4 TEST SETUP 28 9.5 EUT OPERATION CONDITIONS 28 9.6 TEST RESULTS 28 10 . MEASUREMENT INSTRUMENTS LIST 29 11 . EUT TEST PHOTO 31 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 37 APPENDIX B - RADIATED EMISSION - 9 KHZ TO 30 MHZ 40 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 45 APPENDIX D - RADIATED EMISSION- ABOVE 1000 MHZ 48 Report No.:BTL-FCCP-1-2510C192 Report Version: R01 Page 5 of 100 Table of Contents Page APPENDIX E - BANDWIDTH 79 APPENDIX F - MAXIMUM OUTPUT POWER 84 APPENDIX G - CONDUCTED SPURIOUS EMISSIONS 88 APPENDIX H - POWER SPECTRAL DENSITY 95 Report No.:BTL-FCCP-1-2510C192 Report Version: R01 Page 6 of 100 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-1-2510C192 R00 Original Report. Dec. 03, 2025 Invalid BTL-FCCP-1-2510C192 R01 This report changes are as follow: 1. Updated the ENVIRONMENT CONDITIONS in Section 2.3. 2. Updated the radiated below 1GHz in page46~47. 3. Updat…

Text truncated - open the document above for the full version.

Report No.:BTL-FCCP-1-2510C192 Report Version: R01 Page 91 of 100 Test Mode TX BE(EHT20) Mode_Ant. 1 Reference Level-CH01 Reference Level-CH06 Reference Level-CH11 Bandedge-CH01 Bandedge-CH11 Harmonic-CH01 Harmonic-CH06 Harmonic-CH11 Report No.:BTL-FCCP-1-2510C192 Report Version: R01 Page 92 of 100 Test Mode TX BE(EHT20) Mode_Ant. 2 Reference Level-CH01 Reference Level-CH06 Reference Level-CH11 Bandedge-CH01 Bandedge-CH11 Harmonic-CH01 Harmonic-CH06 Harmonic-CH11 Report No.:BTL-FCCP-1-2510C192 Report Version: R01 Page 93 of 100 Test Mode TX BE(EHT40) Mode_Ant. 1 Reference Level-CH03 Reference Level-CH06 Reference Level-CH09 Bandedge-CH03 Bandedge-CH09 Harmonic-CH03 Harmonic-CH06 Harmonic-CH09 Report No.:BTL-FCCP-1-2510C192 Report Version: R01 Page 94 of 100 Test Mode TX BE(EHT40) Mode_Ant. 2 Reference Level-CH03 Reference Level-CH06 Reference Level-CH09 Bandedge-CH03 Bandedge-CH09 Harmonic-CH03 Harmonic-CH06 Harmonic-CH09 Report No.:BTL-FCCP-1-2510C192 Report Version: R01 Page 95 of 100 APPENDIX H - POWER SPECTRAL DENSITY Report No.:BTL-FCCP-1-2510C192 Report Version: R01 Page 96 of 100 Test Mode TX B Mode_Ant. 1 Channel Frequency (MHz) Power Spectral Density (dBm/3kHz) Max. Limit (dBm/3kHz) Result 01 2412 0.39 8.00 Pass 06 2437 2.18 8.00 Pass 11 2462 0.82 8.00 Pass CH01 CH06 CH11 Test Mode TX G Mode_Ant. 1 Channel Frequency (MHz) Power Spectral Density (dBm/3kHz) Max. Limit (dBm/3kHz) Result 01 2412 -5.25 8.00 Pass 06 2437 0.88 8.00 Pass 11 2462 -0.04 8.00 Pass CH01 CH06 CH11 Report No.:BTL-FCCP-1-2510C192 Report Version: R01 Page 97 of 100 Test Mode TX BE(EHT20) Mode_Ant. 1 Channel Frequency (MHz) Power Spectral Density (dBm/3kHz) Max. Limit (dBm/3kHz) Result 01 2412 -8.41 8.00 Pass 06 2437 0.30 8.00 Pass 11 2462 -1.17 8.00 Pass CH01 CH06 CH11 Test Mode TX BE(EHT20) Mode_Ant. 2 Channel Frequency (MHz) Power Spectral Density (dBm/3kHz) Max. Limit (dBm/3kHz) Result 01 2412 -7.39 8.00 Pass 06 2437 -2.03 8.00 Pass 11 2462 -0.53 8.00 Pass CH01 CH06 CH11 Report No.:BTL-FCCP-1-2510C192 Report Version: R01 Page 98 of 100 Test Mode TX BE(EHT20) Mode_Total Channel Frequency (MHz) Power Spectral Density (dBm/3kHz) Max. Limit (dBm/3kHz) Result 01 2412 -4.86 8.00 Pass 06 2437 2.30 8.00 Pass 11 2462 2.17 8.00 Pass Report No.:BTL-FCCP-1-2510C192 Report Version: R01 Page 99 of 100 Test Mode TX BE(EHT40) Mode_Ant. 1 Channel Frequency (MHz) Power Spectral Density (dBm/3kHz) Max. Limit (dBm/3kHz) Result 03 2422 -11.81 8.00 Pass 06 2437 -7.82 8.00 Pass 09 2452 -3.18 8.00 Pass CH03 CH06 CH09 Test Mode TX BE(EHT40) Mode_Ant. 2 Channel Frequency (MHz) Power Spectral Density (dBm/3kHz) Max. Limit (dBm/3kHz) Result 03 2422 -11.41 8.00 Pass 06 2437 -8.38 8.00 Pass 09 2452 -4.04 8.00 Pass CH03 CH06 CH09 Report No.:BTL-FCCP-1-2510C192 Report Version: R01 Page 100 of 100 Test Mode TX BE(EHT40) Mode_Total Channel Frequency (MHz) Power Spectral Density (dBm/3kHz) Max. Limit (dBm/3kHz) Result 03 2422 -8.60 8.00 Pass 06 2437 -5.08 8.00 Pass 09 2452 -0.58 8.00 Pass End of Test Report

东莞市仁丰电子科技有限公司--研发部 11 版本 日期 变更内容 V1.0 2025-9-28 第一版报告 1、项目信息 报告履历 3 客户名称: 广联 项目名称: MT3600 天线结构： PCB 天线规格: WIFI2.4/5G 测试人员: 吴乐清 报告日期: 2025/09 /28 1、项目信息 基本信息（Project information） 4 2、天线位置图  8 天线位置图 ANT2 ANT1 ANT3 2、无源报告  反射参数S11 8 ANT-1 2.4/5G 频率 / MHz 效率/ % 增益/ dBi 2400 73.65 2.53 2410 74.21 2.63 2420 76.55 2.62 2430 77.05 2.52 2440 78.14 2.52 2450 81.63 2.51 2460 82.19 2.54 2470 82.49 2.53 2480 83.27 2.53 2490 83.26 2.57 2500 81.37 2.57 2、无源报告  辐射参数表 0 1 ANT-1 频率 / MHz 效率/ % 增益/ dBi 5150 77.53 3.13 5200 83.38 3.11 5250 82.41 3.14 5300 81.16 3.12 5350 82.21 3.10 5400 85.41 3.12 5450 86.15 3.15 5500 83.61 3.18 5550 80.16 3.21 5600 82.28 3.27 5650 78.45 3.32 5700 80.24 3.31 5750 76.38 3.23 5800 78.28 3.27 5850 81.72 3.25 2、无源报告  辐射方向图 3D方向图 ANT-1 H面-THET=90 E2面-PHI=90 E1面-PHI=0 1 1 2.4GHz 2、无源报告  辐射方向图 3D方向图 ANT-1 H面-THET=90 E2面-PHI=90 E1面-PHI=0 1 1 5GHz 2、无源报告  反射参数S11 8 ANT-2 2.4/5G 频率 / MHz 效率/ % 增益/ dBi 2400 76.52 2.61 2410 74.05 2.62 2420 77.33 2.54 2430 77.72 2.57 2440 81.57 2.56 2450 82.57 2.41 2460 83.66 2.45 2470 81.21 2.52 2480 83.46 2.57 2490 81.11 2.52 2500 81.42 2.70 2、无源报告  辐射参数表 0 1 ANT-2 频率 / MHz 效率/ % 增益/ dBi 5150 78.79 3.08 5200 81.21 3.12 5250 82.08 3.15 5300 82.18 3.17 5350 84.21 3.10 5400 84.77 3.17 5450 85.37 3.13 5500 83.03 3.24 5550 82.77 3.07 5600 81.52 3.11 5650 78.57 3.15 5700 82.04 3.18 5750 78.71 3.17 5800 79.18 3.14 5850 81.14 3.18 2、无源报告  辐射方向图 3D方向图 ANT-2 H面-THET=90 E2面-PHI=90 E1面-PHI=0 1 1 2.4Hz 2、无源报告  辐射方向图 3D方向图 ANT-2 H面-THET=90 E2面-PHI=90 E1面-PHI=0 1 1 5GHz 2、无源报告  反射参数S11 8 ANT-3 5G 频率 / MHz 效率/ % 增益/ dBi 5150 72.44 3.11 5200 70.61 3.28 5250 72.45 3.01 5300 70.47 2.85 5350 74.62 3.17 5400 68.8 2.72 5450 68.74 2.84 5500 70.96 3.09 5550 69.82 2.65 5600 68.71 2.38 5650 70.18 2.46 5700 68.77 2.33 5750 72.53 2.51 5800 73.97 3.19 5850 75.31 3.49 2、无源报告  辐射参数表 0 1 ANT-3 2、无源报告  辐射方向图 3D方向图 ANT-3 H面-THET=90 E2面-PHI=90 E1面-PHI=0 1 1 5GHz 3、OTA有源报告  OTA有源数据表 0 1 Item Measurement Azimuths Elevations Standard Band Channel Frequency Total 1 TRP Every30 Every30 WIFI (Station) WIFI_A (6M) 36 5180 24.7 2 TRP Every30 Every30 WIFI (Station) WIFI_A (6M) 64 5320 25.6 3 TRP Every30 Every30 WIFI (Station) WIFI_A (6M) 165 5825 25.43 4 TIS(EIRP) Every30 Every30 WIFI (Station) WIFI_A (54M) 36 5180 -75.77 5 TIS(EIRP) Every30 Every30 WIFI (Station) WIFI_A (54M) 64 5320 -76.24 6 TIS(EIRP) Every30 Every30 WIFI (Station) WIFI_A (54M) 165 5825 -77 7 TRP Every30 Every30 WIFI (Station) WIFI_G (6M) 1 2412 25.17 8 TRP Every30 Every30 WIFI (Station) WIFI_G (6M) 6 2437 24.65 9 TRP Every30 Every30 WIFI (Station) WIFI_G (6M) 11 2462 25.01 10 TIS(EIRP) Every30 Every30 WIFI (Station) WIFI_G (54M) 1 2412 -78.7 11 TIS(EIRP) Every30 Every30 WIFI (Station) WIFI_G (54M) 6 2437 -79.22 12 TIS(EIRP) Every30 Every30 WIFI (Station) WIFI_G (54M) 11 2462 -78.13

Report No.: BTL-FCCP-2-2510C192 Report Version: R00 Page 41 of 334 11. EUT TEST PHOTOS AC Power Line Conducted Emissions Test Photos Report No.: BTL-FCCP-2-2510C192 Report Version: R00 Page 42 of 334 Radiated Emissions Test Photos 9 kHz to 30 MHz Report No.: BTL-FCCP-2-2510C192 Report Version: R00 Page 43 of 334 Radiated Emissions Test Photos 30 MHz to 1 GHz Report No.: BTL-FCCP-2-2510C192 Report Version: R00 Page 44 of 334 Radiated Emissions Test Photos Band edge & Harmonic(1 GHz to 18 GHz) Report No.: BTL-FCCP-2-2510C192 Report Version: R00 Page 45 of 334 Radiated Emissions Test Photos Harmonic(18 GHz to 40 GHz) Report No.: BTL-FCCP-2-2510C192 Report Version: R00 Page 46 of 334 Conducted Test Photos