2AFJZ-97408RAPiD FIREPROOF SAFE XL

24HMC0033REV 07/2024 P.O. Box 184 8 Grand Island, Nebraska 68802-184 8 Hornady.com/contact Product Registration and Service You must register your product to obtain Warranty Service. Complete the registration form at hornady.com/warranties. To Receive Warranty Service To report a warranty claim, call Hornady ® at 800-338-3220 to request a return authorization number. Returns will not be accepted without prior return authorization by Hornady. ® When a return authorization number has been obtained, be sure all contents have been removed from the RAPiD ® Safe before sending it for service. Hornady ® is not liable for any loss, thef t, or damage to personal property. Post-Warranty Service Information For issues concerning service af ter the Limited Warranty expires, contact Hornady ® at 800-338-3220. Product Serial Number and Key Number Reference You must register your RAPiD ® Safe in order to obtain warranty service. In the event you should need service for your product, please note the following information: Serial Number _______________________________________________________ (see the back or bottom of safe) Key Number _________________________________________________________ (see the face of the lock) Af ter recording the information, store user manual and spare keys in a secure location outside the safe. Scan to register your product to receive the full benefit of its warranty. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located for operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Hornady Manufacturing Company 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Hornady Manufacturing Company Address: 3625 Old Potash Hwy, Grand Island, Nebraska, United States Product Name: RAPiD® FIREPROOF SAFE XL FCC ID: 2AFJZ-97408 Model(s): 97408 2.911(d)(5)(i) Equipment Type We, [Hornady Manufacturing Company] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Matthew Mack Date: Jul. 29, 2024 Title and Company name: Compliance Director; Hornady Manufacturing Company NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Hornady Manufacturing Company 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Hornady Manufacturing Company Address: 3625 Old Potash Hwy, Grand Island, Nebraska, United States Product Name: RAPiD® FIREPROOF SAFE XL FCC ID: 2AFJZ-97408 Model(s): 97408 2.911(d)(5)(ii) Applicant filing We, [Hornady Manufacturing Company] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Matthew Mack Date: Jul. 29, 2024 Title and Company name: Compliance Director; Hornady Manufacturing Company NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Hornady Manufacturing Company Section 2.911(d)(7) USA Agent for Service of Process Company name: Hornady Manufacturing Company Address: 3625 Old Potash Hwy, Grand Island, Nebraska, United States Product Name: RAPiD® FIREPROOF SAFE XL FCC ID: 2AFJZ-97408 Model(s): 97408 2.911(d)(7) USA Designated Agent for Service of Process We, [Hornady Manufacturing Company] (“the applicant”) designate [Hornady Manufacturing Company] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company Name: Hornady Manufacturing Company USA Address: 3625 Old Potash Hwy, Grand Island, Nebraska, United States FRN Number: 0024797615 Contact Name: Matthew Mack Telephone No: 308.382.1390 Email: [email protected] Signature: Title: Compliance Director Date: 2024/7/12 Applicant Company Name: Hornady Manufacturing Company Address: 3625 Old Potash Hwy, Grand Island, Nebraska, United States Grantee FRN Number: 0024797615 FCC Grantee Code:2AFJZ Contact Name: Matthew Mack Telephone No: 308.382.1390 Email: [email protected] Signature: Title: Compliance Director Date: 2024/7/12 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-securi ty- threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.5

Hornady Manufacturing Company Agent Authorization Company: Hornady Manufacturing Company Address: 3625 Old Potash Hwy, Grand Island, Nebraska, United States Product Name: RAPiD® FIREPROOF SAFE XL Model Number(s): 97408 Product Description: RAPiD® FIREPROOF SAFE XL We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Jul. 29, 2024 Name: Matthew Mack Title: Compliance Director Company: Hornady Manufacturing Company

< Hornady Manufacturing Company > Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD21046 Date: Jul. 29, 2024 Subject; Request for Long Term Confidentiality FCC ID: 2AFJZ-97408 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Matthew Mack Title: Compliance Director

Model: 97408 Model: 97408 Model: 97408 Model: 97408

FCC ID LABEL: Label Location: FCC ID: 2AFJZ-97408

Model: 97408 Model: 97408 Coil Antenna Model: 97408 Model: 97408 Model: 97408 Model: 97408 Model: 97408

MPE ESTIMATION FCC ID: 2AFJZ-97408 1. eCFR _47 CFR Part 1 Subpart I -- Procedures Implementing the National Environmental Policy Act of 1969 1.1307 Actions that may have a significant environmental effect, for which Environmental Assessments(EAs) must be prepared. 1.1307(b)(3) Determination of exemption. (i) For single RF sources (i.e., any single fixed RF source, mobile device, or portable device, as defined in paragraph (b)(2) of this section): A single RF source is exempt if: (A) The available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption may not be used in conjunction with other exemption criteria other than those in paragraph (b)(3)(ii)(A) of this section. Medical implant devices may only use this exemption and that in paragraph (b)(3)(ii)(A); 2. Estimation Result Mode Reading result(dBμV/m) PK Output Power (dBm) Output Power(mW) Measurement Result(mW) Limit (mW) 125kHz 84.23 -10.97 0.080 0.080 1 Note: PK Output Power (dBm)= Reading result(dBμV/m)-95.2 Conducted Power see the test report: UNIA24061909ER-61. The SAR evaluation is not required. ------The End------

Antenna Specification Device name: 6116 coil; Wire diameter :0.2MM; Inductance value: 345UH,+/-5%; Size: rectangular, outer diameter length and width 49*39MM, inner diameter length and width 45*35MM; Lead length: lead length 65MM; Working temperature: -20-80 degrees; Storage temperature: -25-105 degrees;

Page 1 of 18 Report No.: UNIA24061909ER-61 FCC RADIO TEST REPORT FCC ID: 2AFJZ-97408 Sample : RAPiD® FIREPROOF SAFE XL Trade Mark : N/A Main Model : 97408 Additional Model : N/A Report No. : UNIA24061909ER-61 Prepared for Hornady Manufacturing Company 3625 Old Potash Hwy, Grand Island, Nebraska, United States Prepared by Shenzhen United Testing Technology Co., Ltd. D101&D401, No. 107, Kaicheng High-Tech Park, Taoyuan Community, Dalang Sub-District, Longhua District, Shenzhen, Guangdong, China Page 2 of 18 Report No.: UNIA24061909ER-61 TEST RESULT CERTIFICATION Applicant ............................... : Hornady Manufacturing Company Address .................................. : 3625 Old Potash Hwy, Grand Island, Nebraska, United States Manufacturer ........................ : Hornady Manufacturing Company Address .................................. : 3625 Old Potash Hwy, Grand Island, Nebraska, United States Product description Product ...................................... : RAPiD® FIREPROOF SAFE XL Trade Name ........................... : N/A Model Name ........................... : 97408 Test Methods ........................ : FCC Rules and Regulations Part 15 Subpart C Section 15.209 ANSI C63.10: 2013 This device described above has been tested by Global United Technology Services Co. Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval, this document may be altered or revised by Global United Technology Services Co. Ltd., personnel only, and shall be noted in the revision of the document. Date of Test Date (s) of performance of tests ............. : Jun. 28, 2024 ~ Jul. 05, 2024 Date of Issue .......................................... : Jul. 05, 2024 Test Result ............................................. : Pass Edited by: Jason Ye Reviewed by: Kelly Cheng Approved by: Liuze Page 3 of 18 Report No.: UNIA24061909ER-61 Table of Contents Pages 1 TEST SUMMARY 4 1.1 TEST PROCEDURES AND RESULTS 4 1.2 TEST FACILITY 4 1.3 MEASUREMENT UNCERTAINTY 5 2 GENERAL INFORMATION 6 2.1 GENERAL DESCRIPTION OF EUT 6 2.2 CARRIER FREQUENCY OF CHANNELS 7 2.3 TEST MODE 7 2.4 TEST SETUP 7 2.5 DESCRIPTION TEST PERIPHERAL AND EUT PERIPHERAL 7 2.6 MEASUREMENT INSTRUMENTS LIST 8 3 CONDUCTED EMISSION 9 3.1 TEST LIMIT 9 3.2 TEST SETUP 9 3.3 TEST PROCEDURE 10 3.4 TEST RESULT 10 4 RADIATED EMISSION 11 4.1 TEST LIMIT 11 4.2 TEST SETUP 13 4.3 TEST PROCEDURE 14 4.4 TEST RESULT 14 5 ANTENNA REQUIREMENT 17 6 PHOTO OF TEST 18 6.1 RADIATED EMISSION 18 Page 4 of 18 Report No.: UNIA24061909ER-61 1 TEST SUMMARY 1.1 TEST PROCEDURES AND RESULTS Note: “N/A” denotes test is not applicable in this Test Report. Item FCC Rules Description Of Test Result 1 FCC Part 15.207 Conducted Emission N/A 2 FCC Part 15.209(a) Radiated Emission Pass 3 FCC Part 15.203 Antenna Requirement Pass 1.2 TEST FACILITY Test Firm : Shenzhen United Testing Technology Co., Ltd. Address : D101&D401, No. 107, Kaicheng High-Tech Park, Taoyuan Community, Dalang Sub-District, Longhua District, Shenzhen, Guangdong, China The testing quality ability of our laboratory meet with "Quality Law of People's Republic of China" Clause 19.The testing quality system of our laboratory meets with ISO/IEC-17025 requirements. This approval result is accepted by MRA of APLAC. Our test facility is recognized, certified, or accredited by the following organizations: A2LA Certificate Number: 4747.01 The EMC Laboratory has been accredited by A2LA, and in compliance with ISO/IEC 17025:2017 General Requirements for testing Laboratories. FCC Registration Number: 674885 The EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications commission. IC Registration Number: 31584 The EMC Laboratory has been registered and fully described in a report filed with the (IC) Industry Canada. Page 5 of 18 Report No.: UNIA24061909ER-61 1.3 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. A. Conducted Measurement: Test Site Method Measurement Frequency Range U, (dB) NOTE UNI ANSI 9KHz ~ 150KHz 2.96 150KHz ~ 30MHz 2.44 B. Radiated Measurement: Test Site Method Measurement Frequency Range U, (dB) NOTE UNI ANSI 9KHz ~ 30MHz 2.50 30MHz ~ 1000MHz 4.80 1000MHz ~ 6000MHz 4.13 Page 6 of 18 Report No.: UNIA24061909ER-61 2 GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Product: RAPiD® FIREPROOF SAFE XL Trade Name: N/A Main Model: 97408 Additional Model: N/A Model Difference: N/A FCC ID: 2AFJZ-97408 Operation Frequency: 125kHz Number of Channels: 1CH Modulation Type: ASK, PSK, FSK Antenna Type: Coil Antenna Antenna Gain: 0dBi Battery: DC 6V Adapter: N/A Power Source: DC 6V from battery Page 7 of 18 Report No.: UNIA24061909ER-61 2.2 CARRIER FREQUENCY OF CHANNELS Channel List Channel Frequency (kHz) 01 125 2.3 TEST MODE NO. TEST MODE DESCRIPTION 1 125kHz 2.4 TEST SETUP Operation of EUT during Radiation below 1GHz testing: 2.5 DESCRIPTION TEST PERIPHERAL AND EUT PERIPHERAL The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. Item Equipment Model No. Cable Length(cm) Remark 1 RAPiD® FIREPROOF SAFE XL 97408 -- EUT 2 access card -- -- AE Note: 1. The support equipment was authorized by Declaration of Confirmation. 2. All the above equipment/cables were placed in worse case positions to maximize emission signals during emission test. EUT Page 8 of 18 Report No.: UNIA24061909ER-61 2.6 MEASUREMENT INSTRUMENTS LIST Item Equipment Manufacturer Model No. Serial No. Calibrated until Radiated Emissions Measurement 1 Radia…

Text truncated - open the document above for the full version.

Model: 97408 Radiated Emission test