2AG2K-CG-018Cowgirl Grinding Vibrating & Tapping

RODEO RUMBLER Instruction Manual Cowgirl Saddle Machine Cowgirl Grinding Vibrating & Tapping Cowgirl Grinding Vibrating & Tapping English . . . . . . . . . . . . . . . . . . 3 Deutsch . . . . . . . . . . . . . . . . . . 10 Español . . . . . . . . . . . . . . . . . . 17 Français . . . . . . . . . . . . . . . . . . 21 Nederlands . . . . . . . . . . . . . . . . . 31 Italiano . . . . . . . . . . . . . . . . . .38 Pусский . . . . . . . . . . . . . . . . . .45 3 EN Congratulations on your purchase of THE COWGIRL TM RODEO RUMBLER. Get ready for the ride of your life! The Cowgirl products are made with silky smooth, body-safe silicone . Our products are free of phthalates and latex . Before use, wash your item with mild soap and lukewarm water or toy cleaner suitable for use with silicone items . 4 GETTING STARTED 1 . Before your first use, charge for approximately 2 hours using the included USB charging cable . The USB charger can be plugged into any USB port or USB/AC power adapter (not included) . 2 . Lubricate The Rodeo Rumbler with a water-based, silicone- compatible lubricant . 3 . Turn on The Rodeo Rumbler by pressing and holding the button . The LED indicator will light up, indicating the power is on and in standby mode . MANUAL CONTROL 1 . Turn on the item to standby mode . 2 . Press the button to activate clitoral tapping function . Press again to cycle between 5 modes . 3 . Press the button to activate vibration function . Press again to cycle between 5 modes . 4 . Power off by pressing and holding the button for 2 seconds . REMOTE CONTROL 1 . Turn on the remote control by pressing and holding the button for 2 seconds . 2 . Press the button to activate clitoral tapping function . Press again to change between 5 modes . 3 . Press the button to activate vibration function . Press again to change between 5 modes . 4 . Power off by pressing and holding the button for 2 seconds . 5 CLEANING 1 . Always clean The Rodeo Rumbler thoroughly before and after each use . 2 . It is recommended to use premium water-based lubricants for the longevity of the item . Silicone and oil-based lubricants can cause damage to the products . 3 . Properly clean the item with lukewarm water and antibacterial soap or toy cleaner . Rinse and pat dry using a lint-free towel . Do not use cleaners containing alcohol, petrol, or acetone . 4 . If the product appears to function abnormally, turn the product off and consult our customer care section on ridethecowgirl. com . Should you require further assistance, please contact [email protected] STORAGE 1 . Detach the attachment prior to storage . 2 . Store all components in a cool, dry place . 3 . Avoid storing in direct sunlight and never expose to extreme heat or cold . WARNING 1 . For adult use only . For external use only . 2 . Do not attempt to modify, disassemble or dismantle the product . 3 . Do not expose this product to fire . 4 . The internal battery is not exchangeable . Do not attempt to remove the internal battery . 6 5 . This product contains small parts not suitable for children . Do not allow children to play with any elements of this product to prevent the risk of injury or suffocation . 6 . Children shall not play with the appliance . 7 . Cleaning and user maintenance shall not be made by children without supervision . 8 . This item is not to be used by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction . Any person who is unable to operate this product by themselves should not use this product . Any person who is pregnant, has a pacemaker, suffers from diabetes, phlebitis and/or thrombosis, who has an increased risk of developing blood clots, has pins, screws or artificial joints or other implanted medical devices should consult a medical professional before use . Do not use on skin that is swollen, inflamed, blistered or broken . Do not use on head, face, chest, stomach or osseous body parts . 9 . This is not a medical device . THE COWGIRL TM is for novelty use only . No medical claims are warranted or implied by the use of this product . If you experience any discomfort during use, discontinue use immediately and consult your health care professional . WARRANTY Warranty covers all defects in workmanship or materials under normal 7 usage and care for a period of 1 year from the date of purchase . Original proof-of-purchase is required to obtain warranty services . Never attempt to repair The Rodeo Rumbler yourself . The warranty will be void if the product is subjected to abnormal use or conditions, accident, mishandling, neglect, unauthorized alteration, misuse, improper installation or repair, or storage . For any warranty inquiries or return information, email [email protected] . THE COWGIRL TM is not responsible for loss or damage of a returned product . RADIO EQUIPMENT DIRECTIVE (RED) DECLARATION OF CONFORMITY Hereby, THE COWGIRL TM declares that this Sex Machine product is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU . A copy of the Declaration of conformity can be found at www. ridethecowgirl.com . FCC STATEMENT This device complies with part 15 of the FCC Rules . Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation . Any changes or modifications not expressly approved by the party 8 responsible for compliance could void the user’s authority to operate the equipment . Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules . These limits are designed to provide reasonable protection against harmful interference in a residential installation . This equipment generates uses and can radiate …

Text truncated - open the document above for the full version.

Rev1/26/2023 (A&HDesignGroup,Ltd.) FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2026-1-14 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2AG2K-CG-018 (A&HDesignGroup,Ltd.)certifiesthattheequipmentforwhichauthorizationissoughtisnot“covered” equipmentprohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903oftheFCC rules. (A&HDesignGroup,Ltd.)certifiesthattheequipmentforwhichauthorizationissoughtdoesnot includecybersecurityoranti-virussoftwareproducedorprovidedbyKasperskyLab,Inc.oranyofits successorsandassignees,includingequipmentwithintegratedKasperskyLab,Inc.(oranyofits successorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886andKDB986446 D01CoveredEquipmentGuidancesectionB(2a). Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, (TerryLau) Rev1/26/2023 (A&HDesignGroup,Ltd.) FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2026-1-14 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2AG2K-CG-018 (A&HDesignGroup,Ltd.)certifiesthat,asofthedateofthefilingoftheapplication,theapplicantis notidentifiedontheCoveredList(asaspecificallynamedentityoranyofitssubsidiariesoraffiliates)as anentityproducing“covered”equipment. Sincerely, (TerryLau)

C5266091_X23_Ed.1 1/1 USAGENTLETTEROFATTESTATION USAgent: CompanyName:WOWTechUSALtd. ContactName:EyalBar-Or Address:103FoulkRoad,Suite202Wilmington,DE19803-3742UnitedStates TelephoneNo:(886)647-9194 Email:[email protected] FRN:0033538497 TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 ThisletteristoconfirmthatwehaveacceptedtheresponsibilitytoactasUSagent representativeonbehalfoftheA&HDesignGroup,Ltd. AsperUSagent,weareawareoftherequirementsinvolvedasoutlinedinFCCEquipment AuthorizationProgramintheirReportandOrderFCC22-84andtheclause§2.911Application requirements. Applicant Companyname:A&HDesignGroup,Ltd. FRN:0034346247 Granteecode:2AG2K ContactName:terry.lau Address:Suite608,TowerOne,HarbourCentre1HokCheungStreet,HungHom,Kowloon, HongKong TelephoneNo:00852-23349488 FaxNo:00852-23349488 TheApplicantacknowledgetheacceptanceofitsobligationtomaintainanagentfor serviceofprocessintheUnitedStatesfornolessthanoneyearaftereitherthe granteehaspermanentlyterminatedallmarketingandimportationoftheapplicable equipmentwithintheU.S.,ortheconclusionofanyCommission-related administrativeorjudicialproceedinginvolvingtheequipment,whicheverislater. Date:2026/1/12 Applicant’sName:terry.lauUSAgent’sName:EyalBar-Or Title:GeneralManagerTitle:HeadofGlobalQuality& Compliance Signature Signature FCCID:2AG2K-CG-018 Email:[email protected] C5266091_X23_Ed.1 1/1

A&HDesignGroup,Ltd. Date ： 2026-1-14 ProductModelNumber:CG-018 FCCID：2AG2K-CG-018 Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C. CanadaV5J5K5toactonourbehalfonallmattersconcerningtheabove namedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatQAILaboratoriesLtd.isallowedtoforwardallinformation relatedtotheapprovalprojecttotheappliedcertificationbodyandtothe notificationentitiesandtodiscussanyissuesconcerningtheapproval application.AnyandallactscarriedoutbyQAILaboratoriesLtd.onour behalfshallhavethesameeffectasactsofourown. By: ContactListedonFCCWesbite Title:TerryLau Email:[email protected] Telephone:00852-23349488 Onbehalfof:A&HDesignGroup,Ltd.

A&HDesignGroup,Ltd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:January21,2026 Subject;RequestforConfidentiality FCCID:2AG2K-CG-018 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure SoftwareSecurityRequirementsforUNIIdevices Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:TerryLau Title:Manager

Andatotalstraighteninglengthof65mm Manufacturer: Fuyi(Shenzhen)IndustrialCo.,Ltd Room25B,Building3,XiangsheLijing,No.388,GuiyueRoad,DafuCommunity, GuanlanSub-district,LonghuaDistrict,ShenzhenCity

AnnexA ExternalPhotos TestModelNo.:CG-018Page1of4 TestModelNo.:CG-018Page2of4 TestModelNo.:CG-018Page3of4 TestModelNo.:CG-018Page4of4

LabelingandLocation Thelabelshownshallbepermanentlyaffixedataconspicuouslocationonthedeviceandbe readilyvisibletotheuseratthetimepurchase(Labelingrequirementsper2.925)

AnnexB Internalphotos TestModelNo.:CG-018Page1of3 TestModelNo.:CG-018Page2of3 PCBAntenna TestModelNo.:CG-018Page3of3

Page 1 of3 MAXLABTestingCo.,Ltd.ReportNo.:MAX25080210P01-R03RF RFTESTREPORT ReportReferenceNo. ....................... :MAX25080210P01-R03RF FCCID.................................................:2AG2K-CG-018 Compiledby (position+printedname+signature) .. : Engineer/CindyZheng Supervisedby (position+printedname+signature)..: Manager/HaleyWen Approvedby (position+printedname+signature) .. : RFManager/VivianJiang Dateofissue.........................................:September1,2025 TestingLaboratoryName...............: MAXLABTestingCo.,Ltd. Address.................................................: 1/F,BuildingB,XinshidaiGRPark,ShiyanStreet,Bao'anDistrict, Shenzhen,Guangdong,518052,People’sRepublicofChina Applicant’sname...............................: A&HDesignGroup,Ltd. Address.................................................: Suite608,TowerOne,HarbourCentre1HokCheungStreet,Hung HomKowloon,HongKong Testspecification..............................: Standard ................................................ : FCCPart15.231 KDB447498D01V06 ANSIC95.1-2019 FCC§1.1310 MAXLABTestingCo.,Ltd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe MAXLABTestingCo.,Ltd.isacknowledgedascopyrightownerandsourceofthematerial.MAXLABTesting Co.,Ltd.takesnoresponsibilityforandwillnotassumeliabilityfordamagesresultingfromthereader's interpretationofthereproducedmaterialduetoitsplacementandcontext. Testitemdescription........................:CowgirlSaddleMachine TradeMark............................................:THECOWGIRL Manufacturer.........................................:A&HDesignGroup,Ltd. Model/Typereference ......................... :CG-018 ListedModels ...................................... :N/A Ratings...................................................:ASK Modulation...........................................:433.92MHz Frequency..............................................DC3.7VFromBattery Result.....................................................:PASS Page 2 of3 MAXLABTestingCo.,Ltd.ReportNo.:MAX25080210P01-R03RF RFExposureEvaluation 1.ThecorrespondingSARExclusionThresholdcondition,listedbelow: 1)The1-gand10-gSARtestexclusionthresholdsfor100MHzto6GHzattestseparationdistances≤50 mmaredeterminedby: [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance, mm)].[Vf(GHz)]≤3.0for1-gSARand≤7.5for10-gextremitySAR,16where ➢f(GHz)istheRFchanneltransmitfrequencyinGHz ➢PoweranddistanceareroundedtothenearestmWandmmbeforecalculation ➢Theresultisroundedtoonedecimalplaceforcomparison Thetestexclusionsareapplicableonlywhentheminimumtestseparationdistanceis≤50mmandfor transmissionfrequenciesbetween100MHzand6GHz.Whentheminimumtestseparationdistanceis<5 mm,adistanceof5mmisappliedtodetermineSARtestexclusion. 2)At100MHzto6GHzandfortestseparationdistances>50mm,theSARtestexclusionthresholdis determinedaccordingtothefollowing: a)[Thresholdat50mminstep1)+(testseparationdistance-50mm):(f(MHz)/150)]mW,at100MHz to1500MHz b)[Thresholdat50mminstep1)+(testseparationdistance-50mm)-10]mWat>1500MHzand≤ 6GHz 3)Atfrequenciesbelow100MHz,thefollowingmaybeconsideredforSARtestexclusion. a)Thethresholdatthecorrespondingtestseparationdistanceat100MHzinstep2)ismultipliedby [1+log(100/f(MHz))]fortestseparationdistances>50mmand<200mm. b)Thethresholddeterminedbytheequationina)for50mmand100MHzismultipliedby/2fortest separationdistances≤50mm. c)SARmeasurementproceduresarenotestablishedbelow100MHz.WhenSARtestexclusioncannot beapplied,aKDBinquiryisrequiredtodetermineSARevaluationrequirementsforanytestresultstobe acceptable. 2.CLASSIFICATION Theantennaofthisproduct,undernormalusecondition,isatlessthan20cmawayfromthebodyofthe user.So,thisdeviceisclassifiedasPortableDevice. EUTSpecification Antennatype:PCBantenna Antennagain(Max)0dBi EvaluationappliedMPEEvaluation SAREvaluation Page 3 of3 MAXLABTestingCo.,Ltd.ReportNo.:MAX25080210P01-R03RF 3.SARTESTEXCLUSIONTHRESHOLDS ThemeasuredconductedPKPower Mode Frequency(MHz)Fieldstrength(dBuV/m@3) EIRP(dBm) TX433.9273.27-26.69 Note: EIRP=E Meas +20log(d Meas )-109.5 EIRPistheequivalentisotropicallyradiatedpower,indBm E Meas isthefieldstrengthoftheemissionatthemeasurementdistance,indBuV/m d Meas isthemeasurementdistance,inm EIRP=E+20log(d)-109.5 ThetunedconductedPKPower(declaredbyclient) Mode Frequency(MHz)TargetPower (dBm) Tolerance ±(dBm) TX433.92-261 Frequency (MHz) Minimum Separation distance(mm) RFOutputpowerResultLimit for1-g SAR Verdict (dBm)(mW) 433.925-250.003160.0004173.0 Exempt from SAR Remark: 1.Outputpowerincludingtuneuptolerance; 2.Whentheminimumtestseparationdistanceis<5mm,adistanceof5mmaccordingtof)insection4.1 isappliedtodetermineSARtestexclusion. The1-gand10-gSARtestexclusionthresholdsfor100MHzto6GHzattestseparationdistances≤50 mmaredeterminedby: [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance,mm)]·[√f(GHz)] ThetestResultislessthan3.0for1-gSARand≤7.5for10-gextremitySAR. Conclusion ThereforethisdevicecomplieswithFCC'sRFradiationexposurelimitsforgeneralpopulationwithout SARevaluation.

MAXLABTestingCo.,Ltd.ReportNo.:MAX25080210P01-R03 Page 1 of31 FCCPART15SUBPARTCTESTREPORT FCCPART15.231 ReportReferenceNo........................:MAX25080210P01-R03 FCCID.................................................:2AG2K-CG-018 Compiledby (position+printedname+signature)..: Engineer/CindyZheng Supervisedby (position+printedname+signature) .. : Manager/HaleyWen Approvedby (position+printedname+signature)..: RFManager/VivianJiang Dateofissue ......................................... :September1,2025 TestingLaboratoryName .............. : MAXLABTestingCo.,Ltd. Address.................................................: 1/F,BuildingB,XinshidaiGRPark,ShiyanStreet,Bao'anDistrict, Shenzhen,Guangdong,518052,People’sRepublicofChina Applicant’sname ............................... : A&HDesignGroup,Ltd. Address.................................................: Suite608,TowerOne,HarbourCentre1HokCheungStreet,Hung HomKowloon,HongKong Testspecification .............................. : Standard ................................................ :FCCPart15.231 MAXLABTestingCo.,Ltd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe MAXLABTestingCo.,Ltd.isacknowledgedascopyrightownerandsourceofthematerial.MAXLAB TestingCo.,Ltd.takesnoresponsibilityforandwillnotassumeliabilityfordamagesresultingfromthe reader'sinterpretationofthereproducedmaterialduetoitsplacementandcontext. Testitemdescription........................:CowgirlGrindingVibrating&Tapping TradeMark............................................:THECOWGIRL Manufacturer ......................................... :A&HDesignGroup,Ltd. Model/Typereference ......................... :CG-018 ListedModels ...................................... :N/A Ratings...................................................:ASK Modulation...........................................:433.92MHz Frequency..............................................DC3.7VFromBattery Result ..................................................... :PASS MAXLABTestingCo.,Ltd.ReportNo.:MAX25080210P01-R03 Page 2 of31 TESTREPORT Equipmentunder Test : CowgirlGrindingVibrating&Tapping Model/Type: CG-018 ListedModels:N/A ModelDeclaration:N/A Applicant: A&HDesignGroup,Ltd. Address: Suite608,TowerOne,HarbourCentre1HokCheungStreet,HungHom Kowloon,HongKong Manufacturer: A&HDesignGroup,Ltd. Address: Suite608,TowerOne,HarbourCentre1HokCheungStreet,HungHom Kowloon,HongKong TestResult : PASS Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetest laboratory. MAXLABTestingCo.,Ltd.ReportNo.:MAX25080210P01-R03 Page 3 of31 Contents 1TESTSTANDARDS..............................................................................................................................4 2SUMMARY.................................................................................................................................................5 2.1GeneralRemarks..........................................................................................................................................5 2.2ProductDescription.....................................................................................................................................5 2.3EquipmentUnderTest.................................................................................................................................5 2.4ShortdescriptionoftheEquipmentunderTest(EUT).............................................................................5 2.5BlockDiagramofTestSetup.......................................................................................................................5 2.6SpecialAccessories.....................................................................................................................................6 2.7RelatedSubmittal(s)/Grant(s)...................................................................................................................6 2.8Modifications.................................................................................................................................................6 3TESTENVIRONMENT........................................................................................................................7 3.1Addressofthetestlaboratory....................................................................................................................7 3.2TestFacility...................................................................................................................................................7 3.3Environmentalconditions............................................................................................................................7 3.4Summaryofmeasurementresults..............................................................................................................8 3.5Statementofthemeasurementuncertainty..............................................................................................8 3.6EquipmentsUsedduringtheTest..............................................................................................................9 4TESTCONDITIONSANDRESULTS.......................................................................................11 4.1ACPowerConductedEmission................................................................................................................11 4.2RadiatedEmission......................................................................................................................................14 4.320dBBandwidth..........................................................................................................................................21 4.4DeactivationTime.......................................................................................................................................22 4.5AntennaRequirement...........................................................…

Text truncated - open the document above for the full version.

FCCID：2AG2K-CG-018 IC:21253-AHCGR02 FCCID：2AG2K-CG-018 IC:21253-AHCGR02