2AG2K-OUT265Remote control layon vibe

FCC ID LABEL: Ca: 5mm x 10mm Label Location FCC ID: 2AG2K-OUT265

FCC RF Exposure EUT Description: Remote control layon vibe Model No.: OUT265 FCC ID: 2AG2K-OUT265 1. Limits According to KDB 447498 D01 General RF Exposure Guidance v06 The 1‐g and 10‐g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤50 mm are determined by: [(max power of channel, including tune‐up tolerance, mW)/(min. test separation distance, mm)]ꞏ[√f(GHz)]≤3.0 for 1‐g SAR and ≤ 7.5 for 10‐g extremity SAR, Where: Result=P/D*√F F= the RF channel transmit frequency in GHz P=Maximum turn‐up power in mw D=Min. test separation distance in mm 2. Test Result of RF Exposure Evaluation 433.915MHz: EIRP(dBm)=80.35(dBuV/m)-95.2=-14.85(dBm) Frequency (MHz) Output power (dBm) Tune Up Power (dBm) Max Tune Up power dBm/mW Min test separati on distance mm Result Limit SAR Test Exclusion 433.915 -14.85 -14±1(-13) 0.050 5 0.007 3.0 Pass Note: PK Output power= conducted power. Conducted power see the test report HK2406203250-E, antenna gain=0dBi Per KDB 447498 D01, when the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. The test exclusion threshold is 0.007 which is<= 3, SAR testing is not required. Note: Exclusion Thresholds Results=[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ꞏ[√f (GHz)] f(GHz) is the RF channel transmit frequency in GHz Distance=5mm

1 ITEM Model Name Center Frequency MAX.GAIN Polarization Azimuth Beam Pattern Impedance Antenna Length Omni-directional 274.227mm Tested Products. Antenna 1:PCB antenna. Frequency=432MHz. Frequency=433MHz. Frequency=434MHz. Manufacturer:Dongguanqinruitechnologyco.Ltd. Product:PCB antenna SPEC. PCB antenna 432 MHz 433 MHz 434 MHz 0dbi Linear, Vertical H021天线规格

Page 1 of 28 Report No.: HK2406203250-E Prepared for : A&H Design Group, Ltd. Suite 608, Tower One, Harbour Centre1 Hok Cheung Street, Hung Hom, Kowloon Hong Kong, China Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Jun. 20, 2024 ~ Jun. 28, 2024 Date of Report: Jun. 28, 2024 Report Number: HK2406203250-E FCC Test Report Test report On Behalf of A&H Design Group, Ltd. For Remote control layon vibe Model No.: OUT265 FCC ID: 2AG2K-OUT265 Applica Address Manufa Address Produc Trade M Product Model a Standa This pu b Shenzh the ma t assume due to it Date of Date (s ) Date of Test Re s ant’s name s ................ acturer's Na s ................ ct descriptio Mark: t name ........ and/or type rds ............ blication ma en HUAK T terial. Shenz e liability for ts placemen Test .......... ) of performa Issue ......... sult ............ T T A ................. ................. ame .......... ................. on .................... reference ................. ay be repro Testing Tech zhen HUAK r damages nt and conte .................. ance of test .................. .................. Testing Eng Technical M Authorized S Test R . : A&H Des . : Suite 60 Hom, K o . : A&H Des . : Suite 60 Hom, K o N/A : Remote . : OUT26 5 . : FCC Pa r ANSI C6 duced in wh hnology Co K Testing Te resulting fr ext. ................ : ts ............. : ................ : ................ : gineer Manager Signatory Page 2 of 2 Result Ce sign Group 8, Tower O n owloon Hon sign Group 8, Tower O n owloon Hon control lay o 5 rt15 Subpar 63.10: 2013 hole or in p o., Ltd. is ac echnology C rom the rea Jun. 20, 2 Jun. 28, 2 Pass : : : 8 ertificatio , Ltd. ne, Harbou g Kong, C h , Ltd. ne, Harbou g Kong, C h on vibe rt C 2017, S art for non- cknowledge Co., Ltd. ta ader's interp 2024 ~ Jun. 2024 (Len L (Sliver (Jason Z Rep on r Centre1 H hina r Centre1 H hina Section 15.2 commercia ed as copyr kes no resp pretation of 28, 2024 Liao) Wan) Zhou) port No.: HK Hok Cheung Hok Cheung 31 l purposes right owner ponsibility fo f the reprod K2406203250 g Street, Hu g Street, Hu as long as and sourc e or and will duced mate 0-E ung ung the e of not erial Page 3 of 28 Report No.: HK2406203250-E Contents 1 . Test Summary ..................................................................................................................................................... 5 1.1 Test Facility ................................................................................................................................................ 5 1.2 Information of the Test Laboratory .......................................................................................................... 5 1.3 Measurement Uncertainty........................................................................................................................ 5 2. General Information ............................................................................................................................................ 6 2.1. Description of Device (EUT) ................................................................................................................... 6 2.2. List of Channels ....................................................................................................................................... 6 2.3. Description of Test Setup ........................................................................................................................ 7 2.4. Description of Support Units .................................................................................................................. 8 2.5. Test Equipment List ................................................................................................................................. 9 3. Conducted Emission Test ................................................................................................................................ 10 3.1 Conducted Power Line Emission Limit ................................................................................................ 10 3.2 Test Setup ................................................................................................................................................ 10 3.3 Test Procedure ........................................................................................................................................ 10 3.4 Test Data .................................................................................................................................................. 11 4. Radiated Emissions .......................................................................................................................................... 12 4.1. Standard Applicable ............................................................................................................................... 12 4.2. Test Procedure ....................................................................................................................................... 12 4.3. Corrected Amplitude & Margin Calculation ........................................................................................ 14 4.4. Environmental Conditions ..................................................................................................................... 14 4.5. Test Data ................................................................................................................................................. 14 5. 20db Occupy Bandwidth Test .......................................................................................................................... 18 5.1. Standard Applicable ............................................................................................................................... 18 5.2. Test Procedure ..............................…

Text truncated - open the document above for the full version.