2AG4N-WPARLOmni TED

Omni TED Trailing edge dimmer www.lumoscontrols.com PRODUCT OVERVIEW SPECIFICATIONS FEATURES Omni TED is a BLE5.2 controllable, trailing edge dimmer. It operates on 90-277VAC input voltage range and can work with single LED loads of up to 250W and has output to connect a switch. It also comes with an optional push button switch input to control the dimming and ON/OFF of the connected load. The device is a part of the Lumos Controls ecosystem, including controllers, sensors, switches, modules, drivers, gateways, and analytical dashboards. It can be easily commissioned, configured and controlled from any mobile device and can be connected to Lumos Controls cloud for data analytics and configuration management. The ecosystem is listed by the Design Lights Consortium (DLC), qualifying it for energy conservation incentive programs and rebates by utility companies. BLE5.2 based non-flooding intelligent communication 1 channel output, up to 250W Supports resistive and capacitive loads Optional push button switch input to control the dimming and ON/OFF of the connected load Compact form factor for easy installation Zero downtime Over-The-Air (OTA) firmware updates Electrical Specifications RemarksValue Input voltage 90-277VAC Rated input voltage Active power L-N, Bi wave 250W @277VAC; 125W @90VAC Min power requirement Supply frequency Inrush current protection Surge transient protection Dimming operation mode Max output power None 50-60Hz 75A 4kV Trailing edge 250W 02 Specifications RemarksValue Frequency range 2402-2480MHz Rx sensitivity Connection distance (device to device by mesh) -95dBm 45m(147.6ft) Bluetooth In an open office environment (Line of Sight) Specifications RemarksValue Dimension 45.1 x 35.1 x 20.2mm (1.7 x 1.4 x 0.8in) Weight120g(4.23oz) Mechanical L x W x H Case materialABS Plastic Flammability ratingUL 94 V-0 -40 to 80 ºC (-40 to 176°F) (-4 to 122°F) Specifications Value Operating temperature Storage temperature -20 to 50°C Relative humidity85% Environmental PRODUCT DIMENSIONS Omni TED top view: 45.1 x 35.1 x 20.2mm (1.7 x 1.4 x 0.8 in) (L x W x H) Case material: V0 flammability rated ABS plastic 0.8in (20.2mm) 1.4in(35.1mm) 1.7in(45.1mm) 9.8in(250mm) 9.8in(250mm) 0.39in(10mm) 0.39in(10mm) 1.4in (35.1mm) 1.7in(45.1mm) WIRE DESCRIPTION 1 4 PinRating Description GaugeName Color 90-277VAC 18AWG (0.75mm 2 ) BlackLine 600V For load18AWG (0.75mm 2 ) RedLoad600V Common neutral 18AWG (0.75mm 2 ) White Neutral600V To connect switch control 18AWG (0.75mm 2 ) BlueSwitch 600V 2 1 4 3 04 2 3 150mm wire antenna 150mm wire antenna ANTENNA INFORMATION Antenna Properties Frequency range 2.4GHz-2.5GHz 50Ω Nominal 1.92:1 Max Impedance VSWR -10dB Max Return loss 1.97dBi Gain(peak) 0.3dBi Max Cable loss Linear Polarization 2.125in (53.98mm) 3.77in (85.6mm) Size comparison with a standard credit card 05 Omni TED 90-277VAC 90-277VAC L Line Neutral Load Switch N Push Switch Omni TED 90-277VAC L Line Neutral Load Switch N NC NC 1. Controlling Omni Ted using Lumos Controls app 2. Configuring Omni TED with Push switch(Optional) The Push switch is optional 1) Short Press the switch for ON/OFF. 2) Long Press the switch for continuous dimming (High to low and vice-versa). LED - + LED - + LED - + TRIAC Driver TRIAC Driver TRIAC Driver Line LED + LED - Neutral Line LED + LED - Neutral Line LED + LED - Neutral LED - + LED - + LED - + TRIAC Driver TRIAC Driver TRIAC Driver Line LED + LED - Neutral Line LED + LED - Neutral Line LED + LED - Neutral WIRING Note Total number of Drivers that can be used will depend on the input rating of the Driver Note Total number of Drivers that can be used will depend on the input rating of the Driver Note 06 Gateway SMART ECOSYSTEM Internet Connectivity 45m(147.6ft) is the device to device communication distance ideally with clear LoS Control Device Omni TED Switch SensorMesh Network Article 3, RED 2014/53/EU Certifications Details CE RoHS 2.0 RoHS Directive (EU) 2015/863 amending Annex II to Directive 2011/65/EU REACH Regulation (EC) No 1907/2006 of REACH WEEE Under the WEEE Directive: 2012/19/EU Bluetooth Declaration ID: D059551 cETLus Standard: UL 60730-1 FCC ID: 2AG4N-WPARL EMC test standards Safety test standard Radio test standard Health test standard (in progress) 07 ORDERING INFORMATION Product NameCommunicationVoltage Rating Load Rating WPARLBLE5.2 90-277VACUp to 250W Omni TED Product DescriptionProduct Code Trailing edge dimmer ITEMS INCLUDED IN THE PACKAGE BOX Omni TEDUser manual The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by WiSilica Inc. is under license. Other trademarks and trade names are those of their respective owners. All Rights Reserved WiSilica Inc www.lumoscontrols.com 20321 Lake Forest Dr D6, Lake Forest, CA 92630 +1 949-397-9330 Ver 1.5 Feb 2023 Screw WallplugWirenut APPLICATION Omni TED LED Fixture Driver FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined b…

Text truncated - open the document above for the full version.

Rev 1/26/2023 WiSilica, Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023/3/20 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AG4N-WPARL WiSilica, Inc. (“Dennis Kwan”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, ------------------------------- Dennis Kwan Rev 1/26/2023 WiSilica, Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023/3/20 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AG4N-WPARL WiSilica, Inc. (“Dennis Kwan”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, ------------------------------- Dennis Kwan

Rev1/26/2023 WiSilica,Inc. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:March-27-2023 Ref:AttestationStatementsPart2.911(d)(7)Filing FCCIDorGranteeCode:[2AG4N] WiSilica,Inc.certifiesthat,asofthedateofthefilingoftheapplication,wedesignateourselvesasthe U.S.agentforserviceofprocess. DesignatedU.S.AgentInformation: FRN:0025157413 Name:WiSilica,Inc. Address:20321LakeForestDriveD6,LakeForest,CA,UnitedStates ContactPerson:DennisKwan Tel.:+16196657268 Email:[email protected] Sincerely, DennisKwan

WiSilica, Inc. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2023/3/20 SUBJECT: FCC Application for (FCC ID: 2AG4N-WPARL) To Whom It May Concern: I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. I understand the following FCC requirements: 1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the "accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the User’s Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Regards, WiSilica, Inc. ------------------------------- Dennis Kwan

Rev 11/20/07 WiSilica, Inc. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AG4N-WPARL Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram “Block Diagram.pdf” Schematics “Schematic.pdf” Operational Description “Operation Description.pdf” The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ------------------------------- Dennis Kwan

\\192.168.0.6\rf无线2\3.2023年案件\3月\黄煜翔\02 递交机构\2.22 LCSA020123177E-B221029001-WiSilica- Omni TED-伍伟峰-FCCID-黄煜翔-报告章 \07机构递交\form-Word档\POA_Letter.docx WiSilica, Inc. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2023/3/20 SUBJECT: FCC Application for (FCC ID: 2AG4N-WPARL) To Whom It May Concern: We, the undersigned, hereby authorize Gavin Liang at Shenzhen LCS Compliance Testing Laboratory Ltd. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Shenzhen LCS Compliance Testing Laboratory Ltd.on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, ------------------------------- Dennis Kwan

Page1of3FCCID:2AG4N-WPARL ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity ExternalPhotosoftheEUT Fig.1 Fig.2 Page2of3FCCID:2AG4N-WPARL ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.3 Fig.4 Page3of3FCCID:2AG4N-WPARL ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.5 Fig.6

Page1of1FCCID:2AG4N-WPARL ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity LABELANDLOCATION (Size:L5.5cmx1.0cm) LabelLocation OmniTED Model:WPARL FCCID:2AG4N-WPARL

Page1of7FCCID:2AG4N-WPARL ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity InternalPhotosoftheEUT Fig.1 Fig.2 Antenna Page2of7FCCID:2AG4N-WPARL ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.3 Fig.4 Page3of7FCCID:2AG4N-WPARL ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.5 Fig.6 Page4of7FCCID:2AG4N-WPARL ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.7 Fig.8 Page5of7FCCID:2AG4N-WPARL ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.9 Fig.10 Page6of7FCCID:2AG4N-WPARL ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.11 Fig.12 Page7of7FCCID:2AG4N-WPARL ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.13

Page 1 of 3 FCCID:2AG4N-WPARL ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity FCCRFExposureEvaluation 1.ProductInformation FCCID2AG4N-WPARL ProductnameOmniTED ModelnumberWPARL Powersupply Input:AC90-277V,50/60Hz,1500mA,270W Output:AC90-277V,50/60Hz,1500mA,250W ModulationTypeGFSKforBluetoothV5.2(DTS) AntennaTypeExternalwireantenna AntennaGain1.97dBi(Max.) Hardwareversion/ Softwareversion/ FCCOperationfrequency2402MHz~2480MHz ExposurecategoryGeneralpopulation/uncontrolledenvironment EUTTypeProductionUnit DeviceTypeMobileDevices 2.EvaluationMethod SystemsoperatingundertheprovisionsofFCC47CFRsectionshallbeoperatedinamannerthatensures thatthepublicisnotexposedtoradiofrequencyenergylevelinexcessoftheCommission’sguidelines. Inaccordancewith47CFRFCCPart2SubpartJ,section2.1091thisdevicehasbeendefinedasmobile devicewherebyadistanceof0.2mnormallycanbemaintainedbetweentheuserandthedevice,andbelow RFPermissibleExposurelimitshallcomplywith. InaccordancewithKDB447498D01forSimultaneoustransmissionMPEtestexclusionapplieswhenthesum oftheMPEratiosforallsimultaneoustransmittingantennasincorporatedinahostdevice,basedonthe calculated/estimated,numericallymodelledormeasuredfieldstrengthsorpowerdensity,is≤1.0.TheMPE ratioofeachantennaisdeterminedattheminimumtestseparationdistancerequiredbytheoperating configurationsandexposureconditionsofthehostdevice,accordingtotheratiooffieldstrengthsorpower densitytoMPElimit,atthetestfrequency.Eitherthemaximumpeakorspatiallyaveragedresultsfrom measurementsornumericalsimulationsmaybeusedtodeterminetheMPEratios.Spatialaveragingdoesnot applywhenMPEisestimatedusingsimplecalculationsbasedonfar-fieldplane-waveequivalentconditions. Theantennainstallationandoperatingrequirementsforthehostdevicemustmeettheminimumtest separationdistancesrequiredbyallantennas,inbothstandaloneandsimultaneoustransmissionoperations, tosatisfycompliance. Page 2 of 3 FCCID:2AG4N-WPARL ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity 3.Limit 3.1ReferEvaluationMethod ANSIC95.1–1999:IEEEStandardforSafetyLevelswithRespecttoHumanExposuretoRadioFrequency ElectromagneticFields,3kHzto300GHz. FCCKDBpublication447498D01General1RFExposureGuidancev06:MobileandPortableDevicesRF ExposureProceduresandEquipmentAuthorizationPolicies. FCCCFR47part11.1310:Radiofrequencyradiationexposurelimits. FCCCFR47part22.1091:Radiofrequencyradiationexposureevaluation:mobiledevices 3.2Limit LimitsforMaximumPermissibleExposure(MPE)/ControlledExposure Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) PowerDensity (mW/cm²) AveragingTime (minute) LimitsforOccupational/ControlledExposure 0.3–3.0 3.0–30 30–300 300–1500 1500–100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100)* (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 LimitsforMaximumPermissibleExposure(MPE)/UncontrolledExposure Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) PowerDensity (mW/cm²) AveragingTime (minute) LimitsforOccupational/ControlledExposure 0.3–3.0 3.0–30 30–300 300–1500 1500–100,000 614 824/f 27.5 / / 1.63 2.19/f 0.073 / / (100)* (180/f 2 )* 0.2 f/1500 1.0 30 30 30 30 30 F=frequencyinMHz *=Plane-waveequivalentpowerdensity 4.MPECalculationMethod PredicationofMPElimitatagivendistance Equationfrompage18ofOETBulletin65,Edition97-01 S=PG/4πR² Where:S=powerdensity P=powerinputtoantenna G=powergainoftheantennainthedirectionofinterestrelativetoanisotropicradiator R=distancetothecenterofradiationoftheantenna 5.AntennaInformation Externalwireantennacanonlyuseantennascertificatedasfollowsprovidedbymanufacturer; Internal Identification Antennatypeand antennanumber Operatefrequency band Maximumantenna gain Note Antenna Externalwire antenna 2402MHz~2480MHz1.97dBiBTAntenna Page 3 of 3 FCCID:2AG4N-WPARL ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity 6.ConductedPower <BTLEMaxConductedPower> ModeChannelFrequency(MHz) MaxConductedPower (dBm) GFSK 02402 -3.84 192440 -2.63 392480 -3.18 7.ManufacturingTolerance <BTLE> GFSK(Peak) ChannelChannel0Channel19Channel39 Target(dBm)-3.0-2.0-3.0 Tolerance±(dB)1.01.01.0 8.MeasurementResults AsdeclaredbytheApplicant,theEUTisawirelessdeviceusedinafixapplication,atleast20cmfromany bodypartoftheuserornearbypersons;fromthemaximumEUTRFoutputpower,theminimumseparation distance,r=20cm,aswellasthegainoftheusedantennarefertoantennainformation,theRFpowerdensity canbeobtained. [Antenna] <BTLE> Band/Mode RFoutputpower AntennaGain (dBi) MPE (mW/cm2) MPE Limits (mW/cm2) dBmmW GFSK -1.00.7943 1.970.00031.0000 Remark: 1.Outputpowerincludingtune-uptolerance; 2.MPEevaluatedistanceis20cmfromusermanualprovidebymanufacturer; 9.Conclusion ThemeasurementresultscomplywiththeFCCLimitper47CFR2.1091fortheuncontrolledRFExposureof mobiledevice. .......................THEENDOFREPORT.........................

HJ-22-008 REV1.0 ManufacturerShenzhen Sunricher Technology Co. Ltd Address3/F, 5/F, Bldg. E, Qihang Industrial Park, 1008 Songbai Road, Nanshan Dis., Shenzhen, 518108, China. Model: 2.4GANT 1. 97 HJ-22-008 REV1.0 RFAntennaCableAssembly Specification 1. Electrical Properties 1.1 Frequency Range........................2.4GHz-2.5GHz 1.2 Impedance.................................50 Ω Nominal 1.3 VSWR..........................................1.92:1MAX 1.4 Return Loss.................................-10dB Max 1.5 Gain(peak).................................1.97dBi 1.6 Cable loss....................................0.3dBi Max 1.7 Polarization.................................Linear 1.8 Admitted Power..............................2W 1.9 Cable..........................................O.D 0.81mm 1.10 Conn.......................................... IPEX 2. Physical Properties: 2.1 Antenna Material.................................CU 2.4 Operating Temp..............................-40°C- +80°C 2.5 Storage Temp.................................-45°C- +85°C HJ-22-008 REV1.0 RF Antanna Assembly SPEC:2.4~2.5GHz HJ-22-008 REV1.0 HJ-22-008 REV1.0

Page 1 of 23 FCC ID: 2AG4N-WPARL Report No.: LCSA020123177EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Appendix A RF Test Data for BT LE (Conducted Measurement) Product Name: Omni TED Test Model: WPARL Environmental Conditions Temperature: 23.5°C Relative Humidity: 52.2% ATM Pressure: 100.0 kPa Test Engineer: Ling Zhu Supervised by: Li Huan Page 2 of 23 FCC ID: 2AG4N-WPARL Report No.: LCSA020123177EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.1 -6dB Bandwidth Condition Mode Frequency (MHz) Antenna -6 dB Bandwidth (MHz) Limit -6 dB Bandwidth (MHz) Verdict NVNT BLE 1M 2402 Ant1 0.656 >=0.5 Pass NVNT BLE 1M 2440 Ant1 0.655 >=0.5 Pass NVNT BLE 1M 2480 Ant1 0.655 >=0.5 Pass Page 3 of 23 FCC ID: 2AG4N-WPARL Report No.: LCSA020123177EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs -6dB Bandwidth NVNT BLE 1M 2402MHz Ant1 -6dB Bandwidth NVNT BLE 1M 2440MHz Ant1 Page 4 of 23 FCC ID: 2AG4N-WPARL Report No.: LCSA020123177EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity -6dB Bandwidth NVNT BLE 1M 2480MHz Ant1 Page 5 of 23 FCC ID: 2AG4N-WPARL Report No.: LCSA020123177EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.2 Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Total Power (dBm) Limit (dBm) Verdict NVNT BLE 1M 2402 Ant1 -3.84 30 Pass NVNT BLE 1M 2440 Ant1 -2.63 30 Pass NVNT BLE 1M 2480 Ant1 -3.18 30 Pass Page 6 of 23 FCC ID: 2AG4N-WPARL Report No.: LCSA020123177EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs Power NVNT BLE 1M 2402MHz Ant1 Power NVNT BLE 1M 2440MHz Ant1 Page 7 of 23 FCC ID: 2AG4N-WPARL Report No.: LCSA020123177EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Power NVNT BLE 1M 2480MHz Ant1 Page 8 of 23 FCC ID: 2AG4N-WPARL Report No.: LCSA020123177EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.3 Maximum Power Spectral Density Level Condition Mode Frequency (MHz) Antenna Total PSD (dBm/3kHz) Limit (dBm/3kHz) Verdict NVNT BLE 1M 2402 Ant1 -20.37 8 Pass NVNT BLE 1M 2440 Ant1 -19.8 8 Pass NVNT BLE 1M 2480 Ant1 -19.86 8 Pass Page 9 of 23 FCC ID: 2AG4N-WPARL Report No.: LCSA020123177EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs PSD NVNT BLE 1M 2402MHz Ant1 PSD NVNT BLE 1M 2440MHz Ant1 Page 10 of 23 FCC ID: 2AG4N-WPARL Report No.: LCSA020123177EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity PSD NVNT BLE 1M 2480MHz Ant1 Page 11 of 23 FCC ID: 2AG4N-WPARL Report No.: LCSA020123177EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.4 Band Edge Condition Mode Frequency (MHz) Antenna Max Value (dBc) Limit (dBc) Verdict NVNT BLE 1M 2402 Ant1 -52.95 -20 Pass NVNT BLE 1M 2480 Ant1 -53.42 -20 Pass Page 12 of 23 FCC ID: 2AG4N-WPARL Report No.: LCSA020123177EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs Band Edge NVNT BLE 1M 2402MHz Ant1 Ref Band Edge NVNT BLE 1M 2402MHz Ant1 Emission Page 13 of 23 FCC ID: 2AG4N-WPARL Report No.: LCSA020123177EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 …

Text truncated - open the document above for the full version.

Page 1 of 34 FCCID:2AG4N-WPARLReportNo.:LCSA020123177EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity FCCTESTREPORT For WiSilica,Inc. OmniTED TestModel:WPARL Preparedfor:WiSilica,Inc. Address:20321LakeForestDriveD6,LakeForest,CA,UnitedStates Preparedby:ShenzhenLCSComplianceTestingLaboratoryLtd. Address:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei, ShajingStreet,BaoanDistrict,Shenzhen,518000,China Tel:(+86)755-82591330 Fax:(+86)755-82591332 Web:www.LCS-cert.com Mail:[email protected] Dateofreceiptoftestsample:February23,2023 Numberoftestedsamples:2 SampleNo.:A020123177-1,A020123177-2 Serialnumber:Prototype DateofTest:February23,2023~February28,2023 DateofReport:February28,2023 Page 2 of 34 FCCID:2AG4N-WPARLReportNo.:LCSA020123177EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity FCCTESTREPORT FCCCFR47PART15C(15.247) ReportReferenceNo......................:LCSA020123177EA DateofIssue.......................................:February28,2023 TestingLaboratoryName..............:ShenzhenLCSComplianceTestingLaboratoryLtd. Address................................................:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei, ShajingStreet,BaoanDistrict,Shenzhen,518000,China TestingLocation/Procedure............:FullapplicationofHarmonisedstandards■ PartialapplicationofHarmonisedstandards□ Otherstandardtestingmethod□ Applicant’sName.............................:WiSilica,Inc. Address................................................:20321LakeForestDriveD6,LakeForest,CA,UnitedStates TestSpecification Standard..............................................:FCCCFR47PART15C(15.247) TestReportFormNo......................:LCSEMC-1.0 TRFOriginator....................................:ShenzhenLCSComplianceTestingLaboratoryLtd. MasterTRF.........................................:Dated2011-03 ShenzhenLCSComplianceTestingLaboratoryLtd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe ShenzhenLCSComplianceTestingLaboratoryLtd.isacknowledgedascopyrightownerandsourceofthe material.ShenzhenLCSComplianceTestingLaboratoryLtd.takesnoresponsibilityforandwillnot assumeliabilityfordamagesresultingfromthereader'sinterpretationofthereproducedmaterialduetoits placementandcontext. EUTDescription...............................:OmniTED TradeMark..........................................: TestMod…

Text truncated - open the document above for the full version.