2AG5OPB-701-BPebblebee Found

USB-C rechargeable lithium polymer battery, lasts up to 12 months per charge when in Low Power Mode. Includes cellular connectivity with purchased subscription. Learn more at pebblebee.com/found. Requires LTE-M cellular connectivity (Coverage available in USA, Canada, and other pebbblebee supported parts of the world with LTE-M bands 2, 4 and 12) or Bluetooth Low Energy 4.0 compatible device with iOS® 11 & up or Android® 5 & up i.e. iPhone 7® and Nexus 5®. One year manufacturer warranty. For user guide, product & warranty info go to www.pebblebee.com/support ©2020 PB Inc., all rights reserved. pebble bee® is a registered trademark of PB Inc. All other trademarks are property of their respective owners. Patent www.pebblebee.com/patents MODEL NO. PB-701-B IC Bluetooth SIG certified FCC ID: 2AG5OPB-701-B, IC: 23453-PB701B IC Bluetooth SIG certifi ed pebblebee.com @pebblebee LIMITED WARRANTY 3 Pebblebee offers a 1 year limited warranty against product defects, effective from the time of delivery. Product defects do not include those resulting from accident, water damage, product modification, or failure to follow instructions for use. If Pebblebee deems the product defective, Pebblebee will replace the device upon receipt.Please contact [email protected] if you believe your device to be defective. Our support team can identify and resolve most issues and will be happy to provide exchange directions for devices that fall within the warranty. SPECS 5 FCC RF Exposure Information (SAR)This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC/IC is 1.6W/kg. For body worn operation, this device has been tested and meets RF exposure guidelines when use with an accessary that contains no metal. Use of other accessories may not ensure compliance with RF exposure guidelines. The 5mm minimum separation distance between the body and this device should be maintained during the operation to ensure the compliance of RF exposure guidelines.Industry Canada Statement This device complies with IndustryCanada license-exempt RSS standard(s).Operation is subject to the following two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation of the device. REGULATORY & SAFETY INFORMATION 6 FCC Compliance StatementThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: CELLULAR GPS LOCATION TRACKER Don’t lose what matters most. Location TrackingUses GPS, and cellular dataCellular CoverageU.S. Nationwide coverage (LTE-M) and other approved parts of the world wth LTE-M bands 2, 4 and 12.BluetoothUses Bluetooth Low Energy (BLE)Sync range: up to 500 ftMobile CompatibilityDevices with Bluetooth 4.0 and up.iOS: iOS® 11 & up i.e. iPhone 7® Android: Android® 9.0 & up i.e. Nexus 5® Weigth / Dimensions 1.1 oz ( 31 grams) 2.12” x 1.38” x 0.63” / (54 mm x 35 mm x 16 mm) SAFE ELECTRONIC DISPOSAL 4 When your device reaches the end of their useful life, please dispose of at your local e-waste center to be recycled and properly discarded ensuring protection of our environment. Contact your local authorities to find a reputable and certified e-waste center near you. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. GPS CELLULAR TRACKING SYSTEM QUICK START GUIDE 0 1. Please make sure your Found is fully charged before using it.2. When the Found’s light is a solid green, this indicates that the battery is fully charged. 3. Meanwhile, download the free Pebblebee app for your Android or iOS phone and follow the in-app instructions. 4. Make sure that your phone's Bluetooth is enabled and that you've shared location permissions with the Pebblebee app. If you have any more questions, check out our iOS setup guide or our Android setup guide on pebblebee.com/support page. 5. Allow the app to always access your location. That is needed to allow the Pebblebee app to locate your valuables while running in the background. 6. Place the found device on your valuables. No more losing what matters most. We recommend fully charging your device before use. Your found battery will last up to 12 months when in low power mode and after full charge. You can check the battery status of the Finder in the device page on the Pebb…

Text truncated - open the document above for the full version.

TM pebblebee.com 1 iOS USER MANUAL – JANUARY 2019 2019 – iOS User Manual Finder TM ©2019 PB Inc., all rights reserved. pebble bee® is a registered trademark of PB Inc. All other trademarks are property of their respective owners. Granted US patents US9,392,404, US9,564,774, US10,074,049, US9,774,410; 9,900,119; 10,063,331; 9,961,523; 9,892,626, USD790373, USD790372 and other PB Inc. pending patents that have not been pub- lished at the time this document was created. MODEL NO. PB-501-B, FCC ID 2AG5ONPB-501-B, IC 23453-PB501B, Bluetooth SIG certified TM TM pebblebee.com 2 iOS USER MANUAL – JANUARY 2019 TABLE OF CONTENTS: Download the App Quick Tips Setting up the App Claiming your Finder Using the Finder Finder Settings Voice Assistants Crowd GPS & Left Behind Features Re-enabling Permissions Battery Replacement Battery Caution Battery Safety FCC Caution Declaration of Conformity NCC Caution 3 4 7 8 9 10 11 12 13 14 16 17 18 19 20 TM pebblebee.com 3 iOS USER MANUAL – JANUARY 2019 The Pebblebee Finder app can be downloaded by searching for the Pebblebee Finder app in the App Store or by visiting pebblebee.com/download. Please make sure your mobile device has Bluetooth ON. Once downloaded, please allow all permissions for full operation. See Quick Tips on following steps for more information. 1 2 Download the App TM pebblebee.com 4 iOS USER MANUAL – JANUARY 2019 The Finder communicates with your phonevia your Bluetooth ® connection. Keep Bluetooth ® ON so that your Pebblebee and phone are always connected. Always keep track of your devices by enabling and keeping Location Services ON. Make sure to ‘Always Allow’, this will allow you to locate and see the device’s last known location on a map. 1 2 KEEP BLUETOOTH ® ON LOCATION SERVICES ON Quick Tips TM pebblebee.com 5 iOS USER MANUAL – JANUARY 2019 Enable Bluetooth ® Sharing so that your device is always communicating with your phone even while you’re not using the App. This will allow the Pebblebee ® App to register last known location of your device. Allow access to your Motion & Fitness Activity for ‘Left Behind Alerts’ functionality to work efficiently. 3 4 BLUETOOTH ® SHARING ON MOTION & FITNESS ON Quick Tips TM pebblebee.com 6 iOS USER MANUAL – JANUARY 2019 Allow notifications including alerts and sounds to be sent to your phone. This allows voice activated functionality and CrowdGPS ® lost notifications. The Pebblebee ® device can also help you find your phone by quickly and briefly pressing your device button once, even if your phone is on Silent. 5 6 NOTIFICATIONS ON REMEMBER ... Quick Tips TM pebblebee.com 7 iOS USER MANUAL – JANUARY 2019 Setting up the App The Pebblebee Finder app can be downloaded by searching for the Pebblebee Finder app in the App Store or by visiting pebblebee.com/download. Open the Pebblebee ® App Open your email and retrieve your activation code. Enter email and tap ‘submit’ button Enter your zip code in the app and tap Submit Code 1 3 2 4 TM pebblebee.com 8 iOS USER MANUAL – JANUARY 2019 Claim the Finder ® Now that you have an account, you can claim your brand new Finder ® ! Tap the bee icon on top to show a list of all claimed devices and the claiming button. Briefly press your Finder’s button (the center front of the device) Tap on Add Device to access the claiming screen. The app will prompt you to name your device, then will add it to your account. The name can be changed later. 1 3 2 4 Briefly press your devices button *If you see a message that the Finder has already been claimed, double check that it has not already been claimed to an account using a different email. TM pebblebee.com 9 iOS USER MANUAL – JANUARY 2019 Using the Finder ® From this screen, you can do just about anything Menu - Tap here to see overall account information. Settings - Tap here to view settings for the currently selected device. Device List - Tap here to see all claimed devices and navigate between devices. New devices can also be claimed here. Find - Tap on FIND to Beep and Flash your Finder when it’s within range of your phone. While beeping, the Finder’s alarm can be stopped by pressing the Finder’s button. Map - The map will show the last known location of the Find- er, which is the last time it was within range of the app. Tap on the map to expand it. 3 2 2 4 4 5 5 TM pebblebee.com 10 iOS USER MANUAL – JANUARY 2019 Finder ® Settiings Finder ® Details: Profile: • Change the name of your Finder ® • Check the battery status of the Finder ® • Change the tone that’s used for the Find Phone feature or turn it off entirely • Enable the Left Behind Alert • Set the keyword used to find the device with voice assistants (Google Assistant or Amazon Alexa) • Mark device as Lost • Delete your Finder ® from the account. Deleting it removes all settings. • See a list of previous notifications • Access the website for device Help TM pebblebee.com 11 iOS USER MANUAL – JANUARY 2019 Voice Assistants The Pebblebee app now offers Amazon Alexa and Google Assistant integrations. That way if you can’t find your phone and Finder, you can ask Alexa or Google to find them for you through voice commands. To set up, go to the Account settings page in the app. Then, follow the directions to get started. TM pebblebee.com 12 iOS USER MANUAL – JANUARY 2019 CrowdGPS ® & Left Behind Features If your device is out of range and can’t be found, mark it as Lost. When it comes within range of any Pebblebee app user, you’ll get a notification alerting you to its new location. Once found, be sure to turn off the Lost button, or you’ll continue to get “Found” notifications for updated locations. When the Left Behind alert is enabled, you’ll receive an alert when the phone notices that your Finder has been out of range for too long (~10 minutes). CrowdGPS ® LEFT BEHIND TM pebblebee.com 13 iOS USER MANUAL – JANUARY 2019 Re-Enabling Permissions If you’ve disabled some permissions, here’s how you can re-enable them: Go to your phone’s Settings. Scroll down the list an…

Text truncated - open the document above for the full version.

PB Inc. DATE : 2020/08/31 FCC ID: 2AG5OPB-701-B Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Company name: BTL Inc. Address: 4F,No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist.114, Taipei, Taiwan Name: Melody Wu For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko North America, Inc, still resides with us. Signature FCC grantee contact person information. Name/Title: Daniel Daoura/CEO Company Name: PB Inc. Address: PO Box 2962 Renton Washington United States 98056 TEL: 2067909087 FAX: 4256867264 Email: [email protected]

    

PB Inc. Company name DATE : 2020/08/31 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AG5OPB-701-B Request for Short-Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission rules, and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we hereby request short-term confidentiality for the following items prior to marketing the device.: l Test Setup Photos l External Photos l Internal Photos l User Manual These documents contain detailed system and equipment description and related information about the product which
PB Inc. considers to be proprietary, confidential, and a custom design and, otherwise would not release to the general public. Since this design is a basis from which future technological products will evolve,
PB Inc.considers this information to be of benefit to its competitors, and that the disclosure of information in these documents would give competitors an unfair advantage in the market. This request is being made retroactively due to an over site on our part. We understand that the information has been publicly available 180 days after date of grant. Signature FCC grantee contact person information. Name/Title: Daniel Daoura/CEO Company Name: PB Inc. Address: PO Box 2962 Renton Washington United States 98056 TEL: 2067909087 FAX: 4256867264 Email: [email protected]

Appendix No.: EP-2007T023-1 APPENDIX-EUT PHOTOS Project No.: 2007T023 Page 1 of 18 Appendix No.: EP-2007T023-1 APPENDIX-EUT PHOTOS Project No.: 2007T023 Page 2 of 18 Appendix No.: EP-2007T023-1 APPENDIX-EUT PHOTOS Project No.: 2007T023 Page 3 of 18 Appendix No.: EP-2007T023-1 APPENDIX-EUT PHOTOS Project No.: 2007T023 Page 4 of 18 Appendix No.: EP-2007T023-1 APPENDIX-EUT PHOTOS Project No.: 2007T023 Page 5 of 18 Appendix No.: EP-2007T023-1 APPENDIX-EUT PHOTOS Project No.: 2007T023 Page 6 of 18

Label & Label Location Model: PB-701-B WLAN label stick on bottom cover outside FCC ID: 2AG5OPB-701-B IC: 23453-PB701B 2 注:自印拉纸长度为21.8mm 自印切割示意图： 虚线为分切线 IA-BI≤0.5 A(3) 3-R1.4 1-C1.94 1.2 1.35 B(3) B 外观判定1级 章冬琴 DATE:2020/08/19 此产品符合公司环境管理 物质管理标准(EWI-32) 条码 FILE\GCXX\客户档案\W230 未注公差: W230 3C029DF00-JJ8-G试做 2020.08.27B 材质变更:1.由原合成纸+合可打字光膜，变更为 合成纸不合可打字光膜 2.增加材质二效果，AW3209+合可打字光膜 刀模具编号:ZY12494 1:1 说明: 1. 材质:A009 AW3209/90mm +A708 25#PET可打字光 膜/85 2.颜色:黑色 3.工艺流程:(1)自印印所有颜色，并合膜切割，切半断，去余料,成卷 (2)自印分切为39.8 mm/卷 4.包装方式:卷装,外卷,文字头朝内，5000pcs/卷 5.产品需符合ROHS 要求

Appendix No.: EP-2007T023-1 APPENDIX-EUT PHOTOS Project No.: 2007T023 Page 7 of 18 Model Name: IN Appendix No.: EP-2007T023-1 APPENDIX-EUT PHOTOS Project No.: 2007T023 Page 8 of 18 Appendix No.: EP-2007T023-1 APPENDIX-EUT PHOTOS Project No.: 2007T023 Page 9 of 18 Appendix No.: EP-2007T023-1 APPENDIX-EUT PHOTOS Project No.: 2007T023 Page 10 of 18 Appendix No.: EP-2007T023-1 APPENDIX-EUT PHOTOS Project No.: 2007T023 Page 11 of 18 Appendix No.: EP-2007T023-1 APPENDIX-EUT PHOTOS Project No.: 2007T023 Page 12 of 18 Appendix No.: EP-2007T023-1 APPENDIX-EUT PHOTOS Project No.: 2007T023 Page 13 of 18 Appendix No.: EP-2007T023-1 APPENDIX-EUT PHOTOS Project No.: 2007T023 Page 14 of 18 Appendix No.: EP-2007T023-1 APPENDIX-EUT PHOTOS Project No.: 2007T023 Page 15 of 18 Appendix No.: EP-2007T023-1 APPENDIX-EUT PHOTOS Project No.: 2007T023 Page 16 of 18 Appendix No.: EP-2007T023-1 APPENDIX-EUT PHOTOS Project No.: 2007T023 Page 17 of 18 Appendix No.: EP-2007T023-1 APPENDIX-EUT PHOTOS Project No.: 2007T023 Page 18 of 18

Report No.: BTL-FCC SAR-1-2007T023 Page 1 of 38 Report Version: R03 FCC SAR Test Report FCC ID: 2AG5OPB-701-B Project No. : 2007T023 Equipment : Pebblebee Found Model Name : PB-701-B Applicant : PB Inc. Address : PO Box 2962 Renton Washington United States 98056 Date of Receipt : Jul, 10 . 2020 Date of Test : Jul, 10. 2020 Issued Date : Sep, 20. 2020 Tested by : BTL Inc. PREPARED BY : (Peter Chen) APPROVED BY : (Scott Hsu) B T L I N C . No. 68-1, Ln. 169, Sec.2, Datong Rd., Xizhi Dist., New Taipei City 221, Taiwan TEL:+886-2-2657-3299 FAX: +886-2-2657-3331 Report No.: BTL-FCC SAR-1-2007T023 Page 2 of 38 Report Version: R03 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, A2L,TAF or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Report No.: BTL-FCC SAR-1-2007T023 Page 3 of 38 Report Version: R03 Table of Contents Page 1. GENERAL SUMMARY 6 2. RF EMISSIONS MEASUREMENT 7 2.1. TEST FACILITY 7 2.2. MEASUREMENT UNCERTAINTY 7 3. GENERAL INFORMATION 8 3.1. STATEMENT OF COMPLIANCE 8 3.2. GENERAL DESCRIPTION OF EUT 9 3.3. LABORATORY ENVIRONMENT 10 3.4. MAIN TEST INSTRUMENTS 11 4. SAR MEASUREMENTS SYSTEM CONFIGURATION 12 4.1. SAR MEASUREMENT SET-UP 12 4.1.1. TEST SETUP LAYOUT 12 4.2. DASY5 E-FIELD PROBE SYSTEM 13 4.2.1. EX3DV4 PROBE SPECIFICATION 13 4.2.2. E-FIELD PROBE CALIBRATION 14 4.2.3. OTHER TEST EQUIPMENT 15 4.2.4. SCANNING PROCEDURE 16 4.2.5. SPATIAL PEAK SAR EVALUATION 17 4.2.6. DATA STORAGE AND EVALUATION 18 4.2.7. DATA EVALUATION BY SEMCAD 19 5. SYSTEM VERIFICATION PROCEDURE 21 5.1. TISSUE VERIFICATION 21 5.2. SYSTEM CHECK 22 5.3. SYSTEM CHECK PROCEDURE 22 6. SAR MEASUREMENT VARIABILITY AND UNCERTAINTY 23 6.1. SAR MEASUREMENT VARIABILITY 23 7. OPERATIONAL CONDITIONS DURING TEST 24 7.1. TEST CONFIGURATION 24 7.2 TEST POSITION 25 7.2.1 BODY 25 8. TEST RESULT 28 8.1. CONDUCTED POWER RESULTS 28 8.1.1. CONDUCTED POWER MEASUREMENTS OF UHF 28 8.2. SAR TEST RESULTS 31 8.2.1. SAR MEASUREMENT RESULT 32 9. SIMULTANEOUS TRANSMISSION CONDITIONS 34 Report No.: BTL-FCC SAR-1-2007T023 Page 4 of 38 Report Version: R03 Table of Contents Page 9.1. STAND-ALONE SAR TEST EXCLUSION 34 10.3 ESTIMATED SAR FOR SIMULTANEOUS TRANSMISSION SAR ANALYSIS 35 10.3.1 ESTIMATED SAR FOR BLUETOOTH 35 10.2 SIMULTANEOUS TRANSMISSION conditions 36 APPENDIX 37 10. TEST LAYOUT 37 Appendix A. SAR Plots of System Verification Appendix B. SAR Plots of SAR Measurement Appendix C. Calibration Certificate Appendix D. Photographs of the Test Set-Up Report No.: BTL-FCC SAR-1-2007T023 Page 5 of 38 Report Version: R03 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue Jul, 16. 2020 R01 Revised bluetooth power, Revised bluetooth test result, Add simultaneous transmission Sep, 11. 2020 R02 Revised antenna gain,Revised simultaneous transmission Sep, 17. 2020 R03 Revised system check Sep, 22. 2020 Report No.: BTL-FCC SAR-1-2007T023 Page 6 of 38 Report Version: R03 1 GENERAL SUMMARY Equipment Pebblebee Found Model Name PB-701-B Brand Name Found Manufacturer Goldtek Technology Co., Ltd. Address 16F., No.166, Jian 1st Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.) Standard(s) ANSI Std C95.1-1992 Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz - 300 GHz.(IEEE Std C95.1-1991) IEEE Std 1528-2013 Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques KDB447498 D01 General RF Exposure Guidance v06 KDB248227 D01 802. 11 Wi-Fi SAR v02r02 KDB865664 D01 SAR measurement 100 MHz to 6 GHz v01r04 KDB865664 D02 SAR Reporting v01r02 KDB941225 D07 UMPC Mini Tablet KDB690783 D01 SAR Listings on Grants v01r03 KDB941225 D05 SAR for LTE Devices v02r05 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. BTL-FCC SAR-1-2007T023) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO/IEC 17025 quality assessment standard and technical standard(s). Report No.: BTL-FCC SAR-1-2007T023 Page 7 of 38 Report Version: R03 2 RF EMISSIONS MEASUREMENT 2.1 TEST FACILITY The test…

Text truncated - open the document above for the full version.

Test Laboratory: BTL Date: 2020/7/10 System Check_H750_200710 Frequency: 750 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 23.2C; Liquid Temperature: 22.5C Medium parameters used: f = 750 MHz; σ = 0.906 S/m; ε r = 42.576; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1486; Calibrated: 2020/6/4 - Probe: EX3DV4 - SN7369; ConvF(10.24, 10.24, 10.24) @ 750 MHz; Calibrated: 2020/5/29 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: ELI V5.0 (20deg probe tilt); Type: QD OVA 002 AA; Serial: 1240 Configuration/Pin=250mW/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.56 W/kg Configuration/Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 54.51 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 3.06 W/kg SAR(1 g) = 2.14 W/kg; SAR(10 g) = 1.45 W/kg Smallest distance from peaks to all points 3 dB below = 17.2 mm Ratio of SAR at M2 to SAR at M1 = 69.7% Maximum value of SAR (measured) = 2.66 W/kg 0 dB = 2.56 W/kg = 4.09 dBW/kg Test Laboratory: BTL Date: 2020/7/10 System Check_H1750_200710 Frequency: 1750 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C Medium parameters used: f = 1750 MHz; σ = 1.322 S/m; ε r = 41.293; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1486; Calibrated: 2020/6/4 - Probe: EX3DV4 - SN7369; ConvF(8.63, 8.63, 8.63) @ 1750 MHz; Calibrated: 2020/5/29 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: ELI V5.0 (20deg probe tilt); Type: QD OVA 002 AA; Serial: 1240 Configuration/Pin=250mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 12.9 W/kg Configuration/Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 100.7 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 16.9 W/kg SAR(1 g) = 9.48 W/kg; SAR(10 g) = 5 W/kg Smallest distance from peaks to all points 3 dB below = 10.1 mm Ratio of SAR at M2 to SAR at M1 = 56.1% Maximum value of SAR (measured) = 13.4 W/kg 0 dB = 12.9 W/kg = 11.12 dBW/kg Test Laboratory: BTL Date: 2020/7/10 System Check_H1900_200710 Frequency: 1900 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C Medium parameters used: f = 1900 MHz; σ = 1.417 S/m; ε r = 40.571; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1486; Calibrated: 2020/6/4 - Probe: EX3DV4 - SN7369; ConvF(8.32, 8.32, 8.32) @ 1900 MHz; Calibrated: 2020/5/29 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: ELI V5.0 (20deg probe tilt); Type: QD OVA 002 AA; Serial: 1240 Configuration/Pin=250mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 14.8 W/kg Configuration/Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 104.4 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 18.8 W/kg SAR(1 g) = 10.3 W/kg; SAR(10 g) = 5.31 W/kg Smallest distance from peaks to all points 3 dB below = 10.7 mm Ratio of SAR at M2 to SAR at M1 = 54.3% Maximum value of SAR (measured) = 14.8 W/kg 0 dB = 14.8 W/kg = 11.69 dBW/kg Test Laboratory: BTL Date: 2020/7/10 System Check_H2450_200710 Frequency: 2450 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C Medium parameters used (interpolated): f = 2450 MHz; σ = 1.803 S/m; ε r = 37.898; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1486; Calibrated: 2020/6/4 - Probe: EX3DV4 - SN7369; ConvF(7.6, 7.6, 7.6) @ 2450 MHz; Calibrated: 2020/5/29 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: ELI V5.0 (20deg probe tilt); Type: QD OVA 002 AA; Serial: 1240 System Performance Check at Frequencies above 1 GHz/Pin=250mW/Area Scan (9x9x1): Measurement grid: dx=12mm, dy=12mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 18.9 W/kg System Performance Check at Frequencies above 1 GHz/Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 104.4 V/m; Power Drift = 0.10 dB Peak SAR (extrapolated) = 26.5 W/kg SAR(1 g) = 13.1 W/kg; SAR(10 g) = 6.16 W/kg Smallest distance from peaks to all points 3 dB below = 9.5 mm Ratio of SAR at M2 to SAR at M1 = 50% Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 19.9 W/kg 0 dB = 18.9 W/kg = 12.78 dBW/kg

Asset No.： E-429 Model No.： D750V3 Serial No.： 1145 Environmental 23.3°C, 51 % Original Cal. Date： June 12, 2019 Next Cal. Date： June 12, 2022 1IEEE Std 1528-2013 2IEC 62209-2 3KDB865664 Equipment：Manufacturer：Model No.：Serial No.：Cal.Organization：Cal. Date： Power AmplifierMini-CircuitsZHL-42W+QA1333003NAFebruary 25, 2019 DC SourcelteckOT6154M00157NAAugust 3, 2019 P-series power meterAgilentN1911AMY45100473NASeptember 23, 2019 wideband power AgilentN1921AMY51100041NASeptember 23, 2019 Smart Power SensorR&SNRP-Z21102209NAMarch 1, 2019 Dual directional WokenTS-PCC0M-05107090019NAMarch 10, 2019 Signal GeneratorAgilentE4438CMY4907131NAMar. 10, 2019 ENA Network AnalyzerAgilentE5071CMY46102965 NA March 10, 2019 Model No ItemOriginak Cal. ResultVerified on 2019/12/2DeviationResult Impedance, transformed to feed 50.2Ω-4.19jΩ51.702Ω-1.32jΩ<5ΩPass Return Loss(dB)-27.6-30.3399.9%Pass SAR Value for 1g(mW/g) 2.062.143.9%Pass SAR Value for 10g(mW/g) 1.381.422.9%Pass ItemOriginak Cal. ResultVerified on 2019/12/2DeviationResult Impedance, transformed to feed 48.9Ω-5.53jΩ46.248Ω-2.18jΩ<5ΩPass Return Loss(dB)-24.9-28.95216.3%Pass SAR Value for 1g(mW/g) 2.082.174.3%Pass SAR Value for 10g(mW/g) 1.391.422.2%Pass SAR Measurement Requirements for 100 MHz to 6 GHz Equipment Information For Head Tissue D750V3For Body Tissue Dipole Internal Calibration Record Standard List IEEE Recommended Practice for Determining the Peak Spatial-Averaged Specific Absorpiton Rate(SAR) in the Human Head from Wireless Communication Devices: Measurement Texhniques, June 2013 Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body(frequency range of 30 MHz to 6 GHz), March 2010 Impedance Test-HeadReturn Loss-Head Impedance Test-BodyReturn Loss-Body Calibrator:Approver: Validation Report for Head TSLValidation Report for Body TSL

Asset No.： E-438 Model No.： D1750V2 Serial No.： 1101 Environmental 23.2°C, 51 % Original Cal. Date： June 7, 2018 Next Cal. Date： June 7, 2021 1IEEE Std 1528-2013 2IEC 62209-2 3KDB865664 Equipment：Manufacturer：Model No.：Serial No.：Cal.Organization：Cal. Date： Power AmplifierMini-CircuitsZHL-42W+QA1333003NAFebruary 25, 2019 DC SourcelteckOT6154M00157NAAugust 3, 2019 P-series power meterAgilentN1911AMY45100473NASeptember 23, 2019 wideband power sensorAgilentN1921AMY51100041NASeptember 23, 2019 Smart Power SensorR&SNRP-Z21102209NAMarch 1, 2019 Dual directional couplerWokenTS-PCC0M-05107090019NAMarch 10, 2019 Signal GeneratorAgilentE4438CMY4907131NAMar. 10, 2019 ENA Network AnalyzerAgilentE5071CMY46102965NAMarch 10, 2019 Model No ItemOriginak Cal. Result Verified on 2019/12/2DeviationResult Impedance, transformed to feed point 49.8Ω-2.69jΩ49.664Ω-2.42jΩ<5ΩPass Return Loss(dB)-31.4-31.6760.9%Pass SAR Value fo r 1g(mW/g) 9.049.141.1%Pass SAR Value fo r 10g(mW/g) 4.94.8-2.0%Pass ItemOriginak Cal. Re…

Text truncated - open the document above for the full version.