2AG62RMT-02Remote Control

When the motorized TV lift is powered on, press and release the button inside the control box as shown. It will beep once. After that, the remote control and the control box begin to match. (This process will take at most 10 seconds) Press and release button on the remote control, then you will hear beeps. Wait for 10 seconds until hearing the final beep, the matching will complete and exit the program. Now, you can control your TV lift directly from the remote control. STEP1: STEP2: Note:Before matching a different remote control, the previous data need to be cleared. Press the button inside the box again as shown for 10 seconds until hearing a beep. Remote Control Operation Instructions A. Match the Remote Control with the Control Box B. Introduce Button Function Upward movement Press until getting the desired position. Downward movement Press until getting the desired position. To set a memory Press for 3 seconds until hearing a beep. To quick get to the memory position Press and release. (mem1 is corresponding to 1, mem2 is corresponding to 2) To get back to initial position: Press for 3 seconds until hearing a beep. Beeping twice indicates the process is finished. To quick conceal TV in the cabinet: Press and release. If need to stop, press again during the process. Temperature Operating Range-10°C~50°C The symbol indicates Direct Current(DC) Indicates that the product must not be processed with household waste. It must be brought to an electric and electric waste collection point for recycling and disposal. By ensuring the appropriate disposal of this product you also help in preventing potentially negative consequences for the environment and human health. The recycling of materials helps preserve our natural resources. For further information regarding the recycling of this product, please contact your municipality, local waste disposal centre or the store where the products was purchased. 127x135mm Operating Frequency2.437GHz Supply by 3V Supply by 3V /AAA battery FCC Statement： Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Company: Lumi Legend Corporation Add: 22/F., Building 1, Lisi Plaza, Huifeng East Road, Ningbo, 315100 China Tel: 0574-27956521 Fax: 0574-27956577 FCC Authorization Date: 2019-12-31 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Lumi Legend Corporation, the undersigned, Hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Printed Name: Puli Quan Title: Certification Engineer QA-FR-170-B

Company: Lumi Legend Corporation Add: 22/F., Building 1, Lisi Plaza, Huifeng East Road, Ningbo, 315100 China Tel: 0574-27956521 Fax: 0574-27956577 E-mail: cnd @lumi.cn FCC Confidential Authorization Date: 2019-12-31 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AG62RMT-02 To: whom it may concern, In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Lumi Legend Corporation hereby requests long-term confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operation Description The above ma terials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Printed Name: Puli Quan Title: Certification Engineer

EXHIBIT A - EUT EXTERNAL PHOTOGRAPHS

EXHIBIT B - EUT INTERNAL PHOTOGRAPHS Antenna

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. FCC PART 15.249 TEST REPORT For Lumi Legend Corporation 22/F., Building 1, Lisi Plaza, Huifeng East Road, Ningbo, 315100 China Report Type: Original Report Product Type: Remote Control Test Engineer: Lee Li Report Number: RSHF191231001-00A Report Date: 2020-04-24 Reviewed By: Oscar Ye EMC Manager Test Labor atory: Bay Area Compliance Laboratories Corp. (Kunshan) No.248 Chenghu Road,Kunshan,Jiangsu province,China Tel: +86-0512-86175000 Fax: +86-0512-88934268 www.baclcorp.com.cn FCC ID: 2AG62RMT-02 Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RSHF191231001-00A FCC Part 15.249 Page 2 of 18 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 3 OBJECTIVE ................................................................................................................................................................... 3 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 3 TEST METHODOLOGY .................................................................................................................................................. 3 MEASUREMENT UNCERTAINTY .................................................................................................................................... 4 TEST FACILITY ............................................................................................................................................................. 4 SYSTEM TEST CONFIGURATION .......................................................................................................................... 5 JUSTIFICATION ............................................................................................................................................................. 5 EUT EXERCISE SOFTWARE .......................................................................................................................................... 5 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 5 EXTERNAL I/O CABLE .................................................................................................................................................. 5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 6 SUMMARY OF TEST RESULTS ............................................................................................................................... 7 TEST EQUIPMENT LIST ........................................................................................................................................... 8 FCC§15.203 - ANTENNA REQUIREMENT .............................................................................................................. 9 APPLICABLE STANDARD .............................................................................................................................................. 9 ANTENNA CONNECTOR CONSTRUCTION ...................................................................................................................... 9 FCC§15.205, §15.209&§15.249- RADIATED EMISSIONS& OUT OF BAND EMISSION ............................... 10 APPLICABLE STANDARD ............................................................................................................................................ 10 EUT SETUP ................................................................................................................................................................ 10 TEST EQUIPMENT SETUP ............................................................................................................................................ 11 TEST PROCEDURE ...................................................................................................................................................... 11 CORRECTED AMPLITUDE & MARGIN CALCULATION ................................................................................................. 12 TEST RESULTS SUMMARY .......................................................................................................................................... 12 TEST DATA ................................................................................................................................................................ 12 FCC §15.215(C) – 20 DB BANDWIDTH TESTING ................................................................................................ 17 APPLICABLE STANDARD ............................................................................................................................................ 17 TEST PROCEDURE ...................................................................................................................................................... 17 TEST DATA ................................................................................................................................................................ 17 Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RSHF191231001-00A FCC Part 15.249 Page 3 of 18 GENERAL INFORMATION Product Description for Equipment under Test (EUT) Ap plicant: Lumi Legend Corporation Tested Model:…

Text truncated - open the document above for the full version.

EXHIBIT C - TEST SETUP PHOTOGRAPHS Radiated Emissions (Below 1GHz) Radiated Emissions (Above 1GHz)