2AGE384103Digital Body Tape Measure

Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and ( 2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC& IC Radiation Exposure Statement: This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Déclaration d’IC sur l’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux radiations définies par le Canada pour des environnements non contrôlés. Cet émetteur ne doit pas être installé au même endroit ni utilisé avec une autre antenne ou un autre émetteur.

External Photo

Internal Photo BT Antenna

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM201101681002 Page: 1 of 10 FCC ID: 2AGE384103 Kobe Jian EMC Laboratory Manager RF Exposure Evaluation Report Application No.: GZEM2011016810CR Applicant: Guilin Gemred Sensor Technology Co., Ltd Address of Applicant: No. D-08, Information Industrial Park, Chaoyang Road Qixing District, Guilin City, Guangxi Zhuang Autonomous Region Manufacturer: The same as applicant Address of Manufacturer: The same as applicant Factory: The same as applicant Address of Factory: The same as applicant Equipment Under Test (EUT): FCC ID: 2AGE384103 EUT Name: Digital Body Tape Measure Model No.: 84103 Trade Mark: Gemred Standard(s): 47 CFR Part 1.1307, Part 2.1093, KDB 447498 Date of Receipt: 2020-11-26 Date of Evaluation: 2020-12-14 to 2020-12-15 Date of Issue: 2021-01-27 Evaluation Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM201101681002 Page: 2 of 10 Revision Record Version Chapter Date Modifier Remark 01 2021-01-27 Original Authorized for issue by: Evaluated By 2020-12-14 to 2020-12-15 Lily_Kuang /Project Engineer Date Checked By 2021-01-27 Ricky_Liu /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM201101681002 Page: 3 of 10 2 Evaluation Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result RF Exposure 47 CFR Part 1.1307, Part 2.1093, KDB 447498 CFR 47 Part 2.1093 CFR 47 Part 2.1093 Pass SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM201101681002 Page: 4 of 10 3 Contents Page 1 Cover Page .............................................................................................................................................. 1 2 Evaluation Summary .............................................................................................................................. 3 3 Contents ................................................................................................................................................. 4 4 General Information ............................................................................................................................... 5 4.1 Details of E.U.T................................................................................................................................ 5 4.2 Description of Support Units............................................................................................................. 5 4.3 Test Location ................................................................................................................................... 5 4.4 Test Facility ..................................................................................................................................... 6 4.5 Deviation from Standards ................................................................................................................. 7 4.6 Abnormalities from Standard Conditions .......................................................................................... 7 5 Radio Spectrum Technical Requirement .............................................................................................. 8 5.1 RF Exposure.................................................................................................................................... 8 5.1.1 Test Requirement: ....................................................................................................................... 8 5.1.2 Conclusion .................................................................................................................................. 8 6 Photographs ......................................................................................................................................... 10 6.1 EUT Constructional Details ............................................................................................................ 10 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM201101681002 Page: 5 of 10 4 General Information 4.1 Details of E.U.T. Power Supply: DC 3V Test Voltage: DC 3V Antenna Gain: 0dBi declared by applicant Antenna Type: Integrated antenna Channel Spacing: 2MHz Modulation Type: GFSK Number of Channels: 40 Operation Frequency: 2402MHz to 2480MHz Hardware Version: GR4103 GNB Firmware Version: V1.2 S/N: RP-20200601 Test Software Version: BT_Tool V1.1 Function: Digital Body Tape Measure with BLE function Power setting level -2 dBm for BLE can not be changed by user BT Version: BT5.0_1M only 4.2 Description of Support Units The EUT has been tested as an independent unit. 4.3 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou Branch EMC Laboratory, 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Tel: +86 20 82155555 Fax: +86 20 82075059 No tests were sub-contracted. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM201101681002 Page: 6 of 10 4.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations:  NVLAP (Lab Code: 200611-0) SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou EMC Laboratory is accredited by the National Voluntary Laboratory Accreditation Program (NVLAP/NIST). NVLAP Code: 200611-0. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.  ACMA SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory can also perform testing for the Australian C-Tick mark as a result of our NVLAP accreditation.  SGS UK(Certificate No.: 32), SGS-TUV SAARLAND and SGS-FIMKO Have approved SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory as a …

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM201101681001 Page: 1 of 50 FCC ID: 2AGE384103 Kobe Jian EMC Laboratory Manager TEST REPORT Application No.: GZEM2011016810CR Applicant: Guilin Gemred Sensor Technology Co., Ltd Address of Applicant: No. D-08, Information Industrial Park, Chaoyang Road Qixing District, Guilin City, Guangxi Zhuang Autonomous Region Manufacturer: The same as applicant Address of Manufacturer: The same as applicant Factory: The same as applicant Address of Factory: The same as applicant Equipment Under Test (EUT): FCC ID: 2AGE384103 EUT Name: Digital Body Tape Measure Model No.: 84103 Trade Mark: Gemred Standard(s): 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2020-11-26 Date of Test: 2020-12-14 to 2020-12-15 Date of Issue: 2021-01-27 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM201101681001 Page: 2 of 50 Revision Record Version Chapter Date Modifier Remark 01 2021-01-27 Original Authorized for issue by: Tested By 2020-12-14 to 2020-12-15 Lily_Kuang /Project Engineer Date Checked By 2021-01-27 Ricky_Liu/Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM201101681001 Page: 3 of 50 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(c) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Minimum 6dB Bandwidth 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Power Spectrum Density 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM201101681001 Page: 4 of 50 3 Contents Page 1 Cover Page .............................................................................................................................................. 1 2 Test Summary ........................................................................................................................................ 3 3 Contents ................................................................................................................................................. 4 4 General Information ............................................................................................................................... 6 4.1 Details of E.U.T................................................................................................................................ 6 4.2 Description of Support Units............................................................................................................. 6 4.3 Measurement Uncertainty ................................................................................................................ 6 4.4 Test Location ................................................................................................................................... 7 4.5 Test Facility ..................................................................................................................................... 8 4.6 Deviation from Standards ................................................................................................................. 9 4.7 Abnormalities from Standard Conditions .......................................................................................... 9 4.8 Duty cycle of the EUT ...................................................................................................................... 9 5 Equipment List ..................................................................................................................................... 10 6 Radio Spectrum Technical Requirement ............................................................................................ 13 6.1 Antenna Requirement .................................................................................................................... 13 6.1.1 Test Requirement: ..................................................................................................................... 13 6.1.2 Conclusion ................................................................................................................................ 13 7 Radio Spectrum Matter Test Results................................................................................................... 14 7.1 Minimum 6dB Bandwidth ............................................................................................................... 14 7.1.1 E.U.T. Operation........................................................................................................................ 14 7.1.2 Test Setup Diagram ................................................................................................................... 14 7.1.3 Measurement Procedure and Data ........................................................................................... 14 7.2 Conducted Peak Output Power ............…

Text truncated - open the document above for the full version.

Test Setup Photo 1.1 RF test Setup 1.2 Radiated Emissions which fall in the restricted bands & Radiated Spurious Emissions Test Setup