2AGNTMDX600958AEVO Max

1 EVO Max 4T user's manual 2022.12 V1.0 Manufacture: Autel Robotics Co., Ltd. Address: 601, 701, 801, 901, Block B1, Nanshan iPark, No. 1001 Xueyuan Avenue, Nanshan District, Shenzhen, Guangdong, 518055, China 2 Reading tips The legend symbol Pay special attention to the legend symbols present in this manual. Warning: Reminder of potentially dangerous situations. Important: Matters in flight operation. Note: Supplementary information. Tip: Tips about getting the best operating experience. Reference: Page numbers to help you find the section in this manual containing contains information. Trademark information EVO Max™, Autel Enterprise™, Starpoint™ and Autel Robotics® are the registered trademarks of Shenzhen Daotong Intelligent Aviation Technology Co., Ltd. (hereinafter referred to as "Daotong Intelligent") in China and other countries / regions. All other products and company names mentioned in this user manual are registered trademarks of their respective holders. Copyright warning This manual and ownership are owned by Daotong Intelligence. Without the express written consent of Daotong Intelligence, no person or entity shall copy or forward any part of this manual in any form or by any means (including, but not limitation, electronic, mechanical, copied, recorded or otherwise) without Daotong Intelligence. This manual is only used for the use and operation of this series of products, and shall not be used for other purposes. Patent information This product was obtained according to the patent procedure. The patent number is as follows: 3 D Daotong Intelligence provides the following documentation and teaching videos for the first time using EVO Max 4T. 1. Quick Guide: Basic knowledge of operating products 2. Product List: list of all items to be included in the box. If any items are missing, contact the Smart User Support or authorized dealer. 3. Battery Safety Operation Guidelines: Basic knowledge and safe operation of batteries. 4. Disclaimer and Safe Operation Guidelines: Instructions on how to operate the product safely. 5. The Product Maintenance Manual: 6. User Manual: Guide you to master the operation method of the product. Watch the teaching video Watch the EVO Max 4T teaching video, scan the QR code or access the website: https: / / www.autelrobotics.cn/article/128.html Recommended reading order 1. Is the User Manual divided into? Two chapters are: first flight notice, Daotong intelligent aircraft EVO Max 4T, intelligent remote control, battery, Autel Enterprise App. 2. Daotong Intelligent advises users to check the items contained in the packing box according to the Product List ". If any items are missing, please contact the Daotong Intelligent User Support or an authorized dealer. 3. Read this document in detail, use the Quick Guide and watch the teaching video to understand the use process. Please carefully read the User Manual, Disclaimer and Safe Use Guidelines and Battery Safe Operation Guidelines before flight to ensure the safe operation and use of all functions 4. Before using the aircraft, ensure that you are familiar with the local laws and regulations related to flight, the functions of the aircraft, the flight control, and the intelligent return process. If you have any questions about using this product, please contact the Daotong Smart User Support or an authorized dealer. 4 download Download EVO Max 4T For the software, visit: https://www.autelrobotics.cn/download/23.html warn Be sure to check the aircraft and other components listed in the list of products in the packing box. Do not use incompatible parts or attempt to modify this aircraft in any manner that does not comply with the official instructions. catalogue Reading tips ....................................................................................................................................... 2 The legend symbol .................................................................................................................... 2 Trademark information ............................................................................................................. 2 Copyright warning ..................................................................................................................... 2 Patent information .................................................................................................................... 2 D ................................................................................................................................................ 3 Watch the teaching video ......................................................................................................... 3 Recommended reading order ........................................................................................ 3 download .................................................................................................................................. 4 Chapter 1:First flight notice............................................................................................................... 6 1.1 First-time use ...................................................................................................................... 6 .1.11 Charging ................................................................................................................... 6 .1.21 Prepare the aircraft .................................................................................................. 7 .1.31 Expand the arm ........................................................................................................ 9 1.1.4 Installing / removing the propeller........................................................................... 9 .1.51 Prepare the remote control ................................................................................... 10 .21 Flight safety................................................................................................................. 10 1…

Text truncated - open the document above for the full version.

Autel Robotics Co., Ltd. Address: 601, 701, 801, 901, Block B1, Nanshan iPark, No. 1001 Xueyuan Avenue, Nanshan District, Shenzhen, Guangdong, 518055, China Tel: 86-18926791906; Fax: 86-755-86147758 Email: [email protected] Attestation Letter Date: 2023-10-30 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: We, Autel Robotics Co., Ltd., hereby declare that our product EVO Max, Model: MDX, ( FCC ID: 2AGNTMDX600958A) , for marketing purpose, this product only supports 900M SRD&2.4G SRD (SRD 1.4MHz: 904-926 MHz, 2403.5-2475.5 MHz; SRD 10MHz: 909-921 MHz, 2407.5-2471.5 MHz; SRD 20MHz: 914-916 MHz, 2412.5-2462.5 MHz; QPSK ,16QAM Modulation), 2.4G Wi-Fi(2412-2462MHz, 802.11 b/g/n ht20/ax hew20(full RU) modes), Radar(60-64 GHz), 5GHz SRD (5150-5250 MHz band: SRD 1.4MHz:5154-5246 MHz; SRD 10MHz: 5157-5243MHz;SRD 20MHz: 5167-5233MHz.5725-5850 MHz band: SRD 1.4MHz: 5728-5847 MHz ,SRD 10MHz: 5733-5842 MHz, SRD 20MHz: 5738-5839 MHz, QPSK, 16QAM Modulation). 5G Wi-Fi(5150-5250 MHz, 5725-5850 MHz, 802.11 a/n ht20/n ht40/ac vht20/ac vht40/ac vht80/ ax he20/ax he40/ax he80(full RU) modes).The other functions, bands and modes was disabled to use by manufacturer in the software, the end user has no capability to activate it. Sincerely, Signature Xiangxi Pan President

Autel Robotics Co., Ltd. Address: 601, 701, 801, 901, Block B1, Nanshan iPark, No. 1001 Xueyuan Avenue, Nanshan District, Shenzhen, Guangdong, 518055, China Tel: 86-18926791906; Fax: 86-755-86147758 Email: [email protected] CFR 47 §2.911(d)(5)(i) Attestation Letter Attestation Letter Date: 2023-10-30 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FCC ID: 2AGNTMDX600958A Autel Robotics Co., Ltd. certifies that the equipment for which authorization is sought,is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature Contact Person: Xiangxi Pan Title:President

Autel Robotics Co., Ltd. Address: 601, 701, 801, 901, Block B1, Nanshan iPark, No. 1001 Xueyuan Avenue, Nanshan District, Shenzhen, Guangdong, 518055, China Tel: 86-18926791906; Fax: 86-755-86147758 Email: [email protected] CFR 47 §2.911 (d)(5)(ii) Attestation Letter Attestation Letter Date: 2023-10-30 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(ii) Filing FCC ID: 2AGNTMDX600958A Autel Robotics Co., Ltd. certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Contact Person: Xiangxi Pan Title:President

U.S. AGENT LETTER OF ATTESTATION Date: 2023-10-30 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: 2AGNTMDX600958A Autel Robotics Co., Ltd. certifies that, as of the date of the filing of the application, Autel Robotics USA LCC is our designated U.S. agent for service of process for the above referenced FCC ID. Autel Robotics Co., Ltd. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Autel Robotics USA LCC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Autel Robotics USA LCC Address: 22522 29th Dr. SE, Ste#101, Bothell, WA 98021 FRN: 0033458068 Tel.: 847 778 5676 Email: [email protected] Signed by (printed name): Jimmy Guo Signature: Applicant: Autel Robotics Co., Ltd. Address: 601, 701, 801, 901, Block B1, Nanshan iPark, No. 1001 Xueyuan Avenue, Nanshan District, Shenzhen, Guangdong, 518055, China FRN: 0025070863 Tel: 86-18926791906 Email: [email protected] Signed by (printed name): Xiangxi Pan Signature:

Autel Robotics Co., Ltd. Address: 601, 701, 801, 901, Block B1, Nanshan iPark, No. 1001 Xueyuan Avenue, Nanshan District, Shenzhen, Guangdong, 518055, China Tel: 86-18926791906; Fax: 86-755-86147758 Email: [email protected] Date: 2023-10-30 FCC Authorization FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We Autel Robotics Co., Ltd., the undersigned, hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Xiangxi Pan President QA-FR-170-B 7/29/2014

Autel Robotics Co., Ltd. Address: 601, 701, 801, 901, Block B1, Nanshan iPark, No. 1001 Xueyuan Avenue, Nanshan District, Shenzhen, Guangdong, 518055, China Tel: 86-18926791906; Fax: 86-755-86147758 Email: [email protected] FCC Confidential Authorization Date: 2023-10-30 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AGNTMDX600958A In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Autel Robotics Co., Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description  Software Security Description As well as short-term confidential treatment of information accompanying this application for a period of 180 days after grant is issued as outlined below:  Internal Photos  User’s Manual  External Photos  Test Set-up Photos The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature Xiangxi Pan President

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-EXP Page 1 of 8 EUT EXTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-EXP Page 2 of 8 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-EXP Page 3 of 8 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-EXP Page 4 of 8 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-EXP Page 5 of 8 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-EXP Page 6 of 8 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-EXP Page 7 of 8 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-EXP Page 8 of 8

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 1 of 45 EUT INTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 2 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 3 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 4 of 45 Bottom Radar China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 5 of 45 Radar Chip and Antenna China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 6 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 7 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 8 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 9 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 10 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 11 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 12 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 13 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 14 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 15 of 45 SRD Antenna 2(Front Left) China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 16 of 45 SRD Antenna 1(Back Left)

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 17 of 45 SRD Antenna 0(Front Right) China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 18 of 45 SRD Antenna 3(Back Right) China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 19 of 45 WIFI Antenna 1 ADS-B Antenna 1 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 20 of 45 ADS-B Antenna 0 WIFI Antenna 0 Front Radar Top Radar Rear Radar China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 21 of 45 GPS Antenna China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 22 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 23 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 24 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 25 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 26 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 27 of 45 Front Radar China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 28 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 29 of 45 Top radar China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 30 of 45 Rear radar China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 31 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 32 of 45

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 33 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 34 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 35 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 36 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 37 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 38 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 39 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 40 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 41 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 42 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 43 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 44 of 45 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-INP Page 45 of 45

MAXIMUM PERMISSIBLE EXPOSURE EVALUATION REPORT Applicant: Autel Robotics Co., Ltd. Address: 601,701,801,901, Block B1, Nanshan iPark, No. 1001 Xueyuan Avenue, Nanshan District, Shenzhen, Guangdong, 518055, China FCC ID: 2AGNTMDX600958A Product Name: EVO Max Standard(s): 47 CFR §1.1310, 47 CFR §2.1091, 47 CFR §15.247(i),47 CFR §15.407(f) 47 CFR §15.225(g) The above device has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230955603-00A Date Of Issue: 2023/11/14 Reviewed By: Julie Tan Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-00A Page 2 of 7 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-00A Page 3 of 7 CONTENTS DOCUMENT REVISION HISTORY .......................................................................................... 4 1. GENERAL INFORMATION .................................................................................................... 5 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 5 1.1.1 General: .......................................................................................................................................................... 5 2 RF EXPOSURE EVALUATION (MPE) ................................................................................... 6 2.1 RF EXPOSURE EVALUATION ............................................................................................................... 6 2.1.1 Applicable Standard ....................................................................................................................................... 6 2.1.2 Calculation formula: ...................................................................................................................................... 6 2.1.3 Calculated Data: ............................................................................................................................................. 7 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-00A Page 4 of 7 DOCUMENT REVISION HISTORY Revision Number Report Number Description of Revision Date of Revision 1.0 CR230955603-00A Original Report 2023/11/14 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-00A Page 5 of 7 1. GENERAL INFORMATION 1.1 Product Description for Equipment under Test (EUT) 1.1.1 General: EUT Name: EVO Max EUT Model: MDX Rated Input Voltage: DC 14.88V from battery EUT Received Date: 2023/9/22 EUT Received Status: Good China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-00A Page 6 of 7 2 RF EXPOSURE EVALUATION (MPE) 2.1 RF Exposure Evaluation 2.1.1 Applicable Standard According to subpart 15.247(i)& 15.407(f)& 15.225(g)and subpart §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1500 / / f/1500 30 1500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According to §1.1310 and §2.1091 RF exposure is calculated. 2.1.2 Calculation formula: Prediction of power density at the distance of the applicable MPE limit S = PG/4R² = power density (in appropriate units, e.g. mW/cm 2 ); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); For simultaneously transmit system, the calculated power density should comply with: China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-00A Page 7 of 7 2.1.3 Calculated Data: Operation Modes Frequency (MHz) Antenna Gain Conducted output power including Tune-up Tolerance Evaluation Distance (cm) Power Density (mW/cm 2 ) MPE Limit (mW/cm 2 ) (dBi) (numeric)(dBm)(mW) SRD 904-926 0.3 1.07 29794.33 20.00 0.169 0.6 2403.5- 2475.5 1.9 1.55 27 501.19 20.00 0…

Text truncated - open the document above for the full version.

1. Anten The an 2. Retur Return 3. Trans The tr nna type ntenna uses rn loss n loss is sho mitting ant ansmitting a 60Gh a patch ant own in the fi tenna gain antenna gai hz millime tenna , as sh figure below in is shown eter wave hown in the w : in the figu r radar an figure belo re below : ntenna ow : 4. direct The di 5. Anten Transm 3dB be Antenn Antenn Antenn Manu f Addre Shenzh tion map irection diag nna key tech mitting ante eamwidth : na channel na frequenc na model: M factured by ess: 601,701 hen, Guang gram is as f hnical indi enna gain: 7 ± 40° : 4T4R cy: 60-64GH MDX_60G : Autel Ro b ,801,901, B gdong, 5180 follows : cators 7.2dBi Hz botics Co., L Block B1, N 055, China Ltd. Nanshan iPaark, No. 10001 Xueyuan Avenue, N anshan Disttrict,

TEST REPORT Applicant: Autel Robotics Co., Ltd. Address: 601,701,801,901, Block B1, Nanshan iPark, No. 1001 Xueyuan Avenue, Nanshan District, Shenzhen, Guangdong, 518055, China FCC ID: 2AGNTMDX600958A Product Name: EVO Max Standard(s): 47 CFR Part 15, Subpart C(15.255) ANSI C63.10-2013 The above device has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230955603-00EM1 Date Of Issue: 2023/11/30 Reviewed By: Julie Tan Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-00EM1 Page 2 of 50 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955603-00EM1 Page 3 of 50 CONTENTS DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 7 1.2.1 EUT Operation Condition: ............................................................................................................................. 7 1.2.2 Support Equipment List and Details .............................................................................................................. 7 1.2.3 Support Cable List and Details ...................................................................................................................... 7 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 7 1.3 FAR FIELD BOUNDARY CALCULATIONS ........................................................................................... 8 1.4 MEASUREMENT UNCERTAINTY .......................................................................................................... 9 2. SUMMARY OF TEST RESULTS .......................................................................................... 10 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 11 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 11 3.1.1 Applicable Standard ..................................................................................................................................... 11 3.1.2 EUT Setup.................................................................................................................................................... 12 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 12 3.1.4 Test Procedure ............................................................................................................................................. 13 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 13 3.2 RADIATED EMISSIONS ....................................................................................................................... 14 3.2.1 Applicable Standard ..................................................................................................................................... 14 3.2.2 EUT Setup.................................................................................................................................................... 14 3.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 16 3.2.4 Test Procedure ............................................................................................................................................. 16 3.2.5 Corrected Amplitude & Margin Calculation .........................................................…

Text truncated - open the document above for the full version.