2AH4HATD500XLTE Asset Tracker with GSM WLAN RX and BLE

BAT-X (BASIC ASSET TRACKER, ATD500X) USER GUIDE V5.0.2 BAT-X 5500 TRABUCCO ROAD SUITE 150, IRVINE, CALIFORNIA 92620 P: +1 (949) 748-8895 E: [email protected] © MOBILOGIX, INC. 1 CONTENTS 2 Introduction ....................................................................................................................................................................................... 3 3 Firmware ............................................................................................................................................................................................ 3 3.1 Firmware Versions .................................................................................................................................................................... 3 4 Quick Start ......................................................................................................................................................................................... 3 4.1 How to turn BAT-X on ............................................................................................................................................................... 3 4.2 LED Status Indicators ................................................................................................................................................................ 3 5 Operating Modes ............................................................................................................................................................................... 4 5.1 Normal Mode ........................................................................................................................................................................... 4 5.2 Discovery Mode ........................................................................................................................................................................ 5 5.3 Factory Mode ........................................................................................................................................................................... 5 6 Hardware ........................................................................................................................................................................................... 6 6.1 Sensors ..................................................................................................................................................................................... 6 6.2 Electrical ................................................................................................................................................................................... 6 6.3 Miscellaneous ........................................................................................................................................................................... 6 6.4 Radios ....................................................................................................................................................................................... 7 7 Contacts ............................................................................................................................................................................................. 8 8 Disclaimers ......................................................................................................................................................................................... 8 9 Version History ................................................................................................................................................................................... 9 BAT-X 5500 TRABUCCO ROAD SUITE 150, IRVINE, CALIFORNIA 92620 P: +1 (949) 748-8895 E: [email protected] © MOBILOGIX, INC. 2 INTROD UCTION This document describes the Mobilogix BAT-X (Basic Asset Tracker, ATD500X). BAT-X is an asset tracker equipped with LTE CatM1/NB1, quad-band 2G, Bluetooth, GNSS, environmental, and IMU sensors. The BAT-X may be in one of three operating modes. Factory mode is set on BAT-X during production for initial delivery and long-term storage of BAT-X. In Factory mode no radios are on, BAT-X waits for 10 minutes of charging to switch to Normal Mode. While in Normal mode, BAT-X will collect the asset location and sensor data and report the data to a cloud platform via cellular air interface. During Normal mode BAT-X may also collect peripheral data via Bluetooth beacon scanning. After a report BAT-X will sleep until the next report (based on configured hold-off timers and thresholds). While not tracking any assets, or for short term storage, Discovery mode may be entered. Discovery mode shuts down all radios except Bluetooth until a wake-up command is received to push BAT-X into Normal mode. 3 FIRM WARE 3 . 1 F I R M W A R E V E R S I O N S • BAT (Dam App): V5.0.2-official • BG96 (Cellular): BG96MAR02A10M1G • BGM13P (Bluetooth): V502A3 4 QUICK START 4 . 1 H O W TO T U R N B A T-X ON From the factory BAT-X must be connected to charger for 10 minutes to enter Normal Mode. Once BAT enters Discovery Mode it will send BT advertisements a unique name based on the cellular IMEI. To Switch BAT-X from Discovery Mode to Normal Mode write 1 to the Cycling Power Vector. 4 . 2 L E D S T A TU S I N D I C A TO R S Data LED Slow, short blinks: Trying to register Slow, long blinks: Registered but idle Fast blinks: Data in transit Power LED Green: 100% - 40% Yellow: 39% - 20% Red: 19% - 0% GNSS LED Blinking: Acquiring location Solid: Location acquired BAT-X 5500 TRABUCCO ROAD SUITE 150, IRVINE, CALIFORNIA 92620 P: +1 (949) 748-8895 E: [email protected] © MOBILOGIX, INC. 5 OP ERATING M OD ES 5 . 1 N O R M A L M O D E Normal Mode will allow BAT-X to go between sleeping and active work states to report data to the cloud. Active work states are triggered by hold-off timers and threshold values according to the BAT-X configuration. Entry Trigger…

Text truncated - open the document above for the full version.

Date: 04/17/2018 VCB_F-01: Operating Procedures Form – FCC Authorization v02 Page 1 of 1 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2020-06-08 SUBJECT: FCC Application for (FCC ID: 2AH4HATD500X) To Whom It May Concern: We, the undersigned, hereby authorize _David Zhang___ (Individual’s name) in __Vista Laboratories, Inc. __ (Company) at _1261 Puerta Del Sol, San Clemente, CA 92673_____ (Address) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by __ Vista Laboratories, Inc. ____ (Company) on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Client’s signature: Recoverable Signature X Signed by: 6258714b-ccea-48eb-a8c9-108c0fd3e39d Client’s name & title: Amir Tavakoli | Director of Compliance Contact information / address: 7700 Irvine Center Drive #800, Irvine CA 92618

www.mobilogix.com 5500 Trabuco Road, Suite 150, Irvine, CA 92620 Tel: (949) 748-8895 Mobilogix, the logo and the M design are trademarks of Mobilogix, Inc. Other registered trademarks that appear on this brochure are the property of the respective owners LETTER OF AUTHORIZATION This letter certifies that Mobilogix Inc. has engaged the services of GMA LABS LLC to assist Mobilogix Inc. in filing applications for regulatory approvals on our behalf for the following product: Trademark / Brand: Mobilogix Product Names: ATD500X Model(s): BAT-X Please direct any correspondence with Mobilogix Inc. in all matters relating to the applications for regulatory approvals to GMA Labs LLC. Thank you for your assistance in obtaining the corresponding certifications. Name (print): Ramy Mourad Title: Director of R&D Date: June 3, 2020 Signature:

Date: 04/17/2018 VCB_F-01: Operating Procedures Form – FCC Confidentiality v03 Page 1 of 1 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AH4HATD500X Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Type of Confidentiality Requested Exhibit Type ☐Short Term ☒Permanent Block Diagrams ☒Short Term External Photos ☒Short Term ☐Permanent* Internal Photos ☐Short Term ☒Permanent Operation Description ☐Short Term ☒Permanent Parts List/BOM ☐Short Term ☒Permanent Schematics ☒Short Term Test Setup Photos ☒Short Term ☐Permanent* User manual *Requires further justification before permanent confidentiality will be allowed. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below for an initial period of 180 (ie- “ 45”, “90” or “180”) days. Sincerely, Client’s signature: Client’s name & title: Amir Tavakoli | Director of Compliance Contact information / address: 7700 Irvine Center Drive#800, Irvine, CA 92618, USA

EUT Top View EUT Bottom View EUT Front View EUT Rear View EUT Left View EUT Right View

EUT label and label location (Example only) Model: BAT-X FCC ID: 2AH4HATD500X IC: 21385-ATD500X

EUT Cover Off View-1 EUT Cover Off View-2 EUT Main PCBA – Top View EUT Main PCBA – Bottom View EUT Battery

TÜV SÜD AMERICA INC 10040 Mesa Rim Road San Diego, CA 92121-2912 Phone: 858 678 1400 FAX: 858 546 0364 September 29, 2018 TÜV SÜD BABT Octagon House, Concorde Way Segensworth Rd N, Fareham PO15 5RL Attention: Director of Certification RE: Analysis of RF Exposure for Portable and Mobile use per KDB 447498 D01 Mobile Portable RF Exposure v06 and RSS-102 Issue 5 March 2015. FCC ID: 2AH4HATD500S IC: 21385-ATD500S 1. Limits: Limits for General Population/Uncontrolled Exposure (Title 47 Subpart J §2.1091 and KDB 447498 D01 referring to limits under §1.1310) Frequency Range (MHz) Electric Field Strength (E) (V/m) Electric Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Time (minutes) 0.3 - 1.34 614 1.63 *(100) 30 1.34 - 30 824/f 2.19/f *(180/f 2 ) 30 30 - 300 27.5 0.073 0.2 30 300 - 1500 - - f/1500 30 1500 - 100,000 - - 1.0 30 f = frequency in MHz *Plane-wave equivalent power density Limits for Devices Used by the General Public (Uncontrolled Environment (RSS-102 Issue 5 March 2015) Frequency Range (MHz) Electric Field Strength (V/m rms) Magnetic Field (A/m rms) Power Density (W/m 2 ) Reference Period (minutes) 0.003 - 10 21 83 90 - Instantaneous 0.1 - 10 - 0.73/f - 6** 1.1 - 10 87/f 0.5 - - 6** 10 - 20 27.46 0.0728 2 6 20 - 48 -58.07/f 0.25 0.1540/f 0.25 8.944/f 0.5 6 48 - 300 22.06 0.05852 1.291 6 TÜV SÜD AMERICA INC 10040 Mesa Rim Road San Diego, CA 92121-2912 Phone: 858 678 1400 FAX: 858 546 0364 300 - 6000 3.142 f 0.3417 0.008335 f .0.3417 0.02619 f 0.6834 6 6000 - 15000 61.4 0.163 10 6 15000 - 150000 61.4 0.163 10 616000/f 1.2 150000 - 300000 0.158f 0.5 4.21 x 10 .-4 f 0.5 6.67 x 10 .-5 f 616000/f 1.2 f is frequency in MHz *Based on nerve stimulation (NS) ** Based on specific absorption rate (SAR) 2. Mobile MPE Calculation Summary using a 20cm separation distance: Mode Output Power Power Density (mW/cm 2 ) BT 5.0 163 mW EIRP 0.0326 LTE B12 (worst case MPE ratio) 447.92 mW 0.089 Note: The output power and power density presented here are from the MPE reports of the module used (original filing): Module FCC ID IC Number BT 5.0 (Model: BGM13P22A) QOQBGM13P 5123A-BGM13P Quectel BG96 LTE CAT M1 cellular radio XMR201707BG96 10224A-201709BG96 Note: WiFi module (ESP8285 232016 POS717) is not included since it is configured for receive mode only 3. Co-Located Transmitters transmission table: Transmitter type Transmitter type that can transmit at the same time BT 5.0 Cellular Cellular BT 5.0 4. Simultaneous Transmission MPE: Transmitter type MPE (mw/cm 2 ) FCC Limit (mW/cm 2 ) IC Limit (mW/cm 2 ) FCC MPE ratio (MPE/Limit) ISED MPE ratio (MPE/Limit) BT 5.0 0.0326 1.00 0.54689 0.0326 0.0596 Cellular 0.0890 0.46 0.23017 0.1934 0.3866 Sum of the ratios (should be <1.0) 0.2260 0.4462 TÜV SÜD AMERICA INC 10040 Mesa Rim Road San Diego, CA 92121-2912 Phone: 858 678 1400 FAX: 858 546 0364 Sincerely, Ferdie S. Custodio Name Authorized Signatory Title: Senior EMC Test Engineer /Wireless Team Lead

Reference number: 290042-2-3 Page 2 of 89 Table of Contents PRODUCT DESCRIPTION .................................................................................................................................. 3 Equipment Under Test (EUT) .......................................................................................................................... 3 Description of the EUT .................................................................................................................................... 3 Ratings and declarations ................................................................................................................................. 3 Power Supply .................................................................................................................................................. 3 Mechanical Size of the EUT ............................................................................................................................ 3 Samples ........................................................................................................................................................... 4 GENERAL REMARKS .......................................................................................................................................... 5 Disclaimer ........................................................................................................................................................ 5 SUMMARY OF TESTING ..................................................................................................................................... 6 EUT Test Conditions during Testing ............................................................................................................... 6 TEST RESULTS ................................................................................................................................................... 8 Conducted Emissions In The Frequency Range 150 kHz - 30 MHz ............................................................... 8 Maximum Peak Conducted Output Power ...................................................................................................... 11 Transmitter Radiated Spurious Emissions 30 - 26500 MHz ........................................................................... 24 Transmitter Band Edge Measurement and Conducted Spurious Emissions .................................................. 45 6 dB Bandwidth of the Channel ....................................................................................................................... 61 Power Spectral Density ................................................................................................................................... 69 99% Occupied Bandwidth ............................................................................................................................... 77 TEST EQUIPMENT .............................................................................................................................................. 89 Reference number: 290042-2-3 Page 3 of 89 Product Description PRODUCT DESCRIPTION Equipment Under Test (EUT) Trade mark: Silicon Labs Model: BGM13P32A, BGM13P32E, BGM13P22A, BGM13P22E Type: Bluetooth Low Energy Module Serial no: - FCC ID: QOQBGM13P IC: 5123A-BGM13P Description of the EUT BGM13P is a Bluetooth low energy module with two antenna variants. Variant A is equipped with chip antenna while the E variant has RF pin for the use of external antenna. Classification of the device Fixed device Mobile Device (Human body distance > 20cm) Portable Device (Human body distance < 20cm) Modifications Incorporated in the EUT One sample was modified to allow conducted measurements to be made. Ratings and declarations Operating Frequency Range (OFR): 2402 - 2480 MHz Channels: 40 Channel separation: 2 MHz Effective conducted power: 19.60 dBm (Peak) Modulation: GFSK Integral Antenna gain: A-variant: 1 dBi External Antenna gain: E-variant: 2.14 dBi Power Supply Operating voltage range: 2.0 - 3.8 VDC (tested with 3.3V regulated by the development board) Separate AC/DC adaptor, Huawei model: HW-050100E01 (115 V, 60 Hz input / 5 V output) was used during the tests to power up the development board which feeds the module (EUT) during AC emissions test. Supply is not provided by the manufacturer. In other tests the development board was supplied with laboratory power supply. Mechanical Size of the EUT Height: 2 mm Width: 20 mm Length: 15 mm Reference number: 290042-2-3 Page 4 of 89 Product Description Samples EUT Description 1. BGM13P32A Original A variant, equipped with chip antenna 2. BGM13P32A Modified A variant, Short RF cable added for conducted tests 3. BGM13P32E Original E variant with RF pin for external antenna 4. BGM13P22A Modified A variant, Short RF cable added for conducted tests 5. BGM13P22E Original E variant with RF pin for external antenna Reference number: 290042-2-3 Page 5 of 89 General remarks GENERAL REMARKS Disclaimer This document is issued by the Company under its General Conditions of service accessible at http://www.sgs.com/terms_and_conditions.htm. attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are ret…

Text truncated - open the document above for the full version.

Phone: +1 (949) 393-1123 Web: www.vista-compliance.com Email: [email protected] FCC ISED RF Test Report Test Report Number GLS-20042831-LC-FCC-IC-RF-R1 FCC ID 2AH4HATD500X ISED ID Applicant 21385-ATD500X Mobilogix Applicant Address 5500 Trabuco Road, Suite 150, Irvine, CA 92620 Product Name ATD500X Model (s) BAT-X Date of Receipt 04/28/2020 Date of Test 04/28/2020-06/03/2020 Report Issue Date 06/04/2020 Test Standards 47 CFR Part 15.247 RSS-247 Issue 2, Feb 2017 47CFR Part 22 47CFR Part 24 47CFR Part 27 47CFR Part 90 RSS-130 Issue 2: Feb 2019 RSS-132 Issue 3: Jan 2013 RSS-133 Issue 6: Jan 2018 RSS-139 Issue 3: Jul 2015 Test Result PASS Issued by: Vista Compliance Laboratories 1261 Puerta Del Sol, San Clemente, CA 92673 USA www.vista-compliance.com Daniel Bruno (Test Technician) David Zhang (Technical Manager) This report is for the exclusive use of the applicant. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. Note that the results contained in this report pertain only to the test samples identified herein, and the results relate only to the items tested and the results that were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested and the results thereof based upon the information provided to us. The applicant has 60 days from date of issuance of this report to notify us of any material error or omission. Failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is not to be reproduced by any means except in full and in any case not without the written approval of Vista Laboratories. Report# GLS-20042831-LC-FCC-IC-RF Page 2 of 42 REVISION HISTORY Report Number Version Description Issued Date GLS-20042831-LC-FCC-IC-RF 01 Initial report 06/04/2020 GLS-20042831-LC-FCC-IC-RF-R1 R1 Update FCC and ISED ID 07/01/2020 Report# GLS-20042831-LC-FCC-IC-RF Page 3 of 42 TABLE OF CONTENTS 1 TEST SUMMARY ...................................................................................................................................................... 4 2 GENERAL INFORMATION ..................................................................................................................................... 5 2.1 Applicant .......................................................................................................................................................... 5 2.2 Product information ...................................................................................................................................... 5 2.3 Test standard and method .......................................................................................................................... 6 3 TEST SITE INFORMATION ..................................................................................................................................... 7 4 MODIFICATION OF EUT / DEVIATIONS FROM STANDARDS ....................................................................... 7 5 TEST CONFIGURATION AND OPERATION ....................................................................................................... 7 5.1 EUT Test Configuration ................................................................................................................................. 7 5.2 Supporting Equipment ................................................................................................................................. 8 6 UNCERTAINTY OF MEASUREMENT ................................................................................................................... 8 7 TEST RESULTS .......................................................................................................................................................... 9 7.1 Radiated Spurious Emissions into Restricted Frequency Bands ......................................................... 9 7.2 Strength of Spurious Radiation ........................................................................................................................ 17 8 EUT AND TEST SETUP PHOTOS ......................................................................................................................... 41 9 TEST INSTRUMENT LIST...................................................................................................................................... 42 Report# GLS-20042831-LC-FCC-IC-RF Page 4 of 42 1 Test Summary Test Item Test Requirement Test Method Result Radiated Spurious Emissions into Restricted Frequency Bands (intentional) 47 CFR Part 15.247 RSS-247 Issue 2, Feb 2017 ANSI C63.10: 2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Pass Field Strength of Spurious Radiation (licensed band) 2.1046 22.917 (a), 24.238 (a), 90.691, 27.53 (f), (g), (h), (c)(2) and (5) RSS-130(4.7.1) and (4.7.2) RSS-132 (5.5) RSS-133 (6.5) RSS-139 (6.6) SRSP-510(5.1.2) ANSI C63.26: 2015 KDB 971168 D01 Power Meas License Digital Systems v03r01 KDB 412172 D01 Determining ERP and EIRP v01r01 Pass Report# GLS-20042831-LC-FCC-IC-RF Page 5 of 42 2 General Information 2.1 Applicant Applicant Mobil…

Text truncated - open the document above for the full version.

Radiated Emissions Below 1GHz setup – Front Radiated Emissions Above 1GHz setup – Front