2AH6G-BR200BR300Barcode Scanner

LED Indicator V3.1.21.0510 System setting Support USB and wireless data transmission Long distance transmission Large-capacity storage data With a large capacity battery long standby Vibration Setting () Selection function 2.4G Pair: Scan the "pairing settings" bar code to enter pairing mode (the green light will flash quickly) Plug the receiver into the USB port of the device, you will hear the sound and the blue light will always on after the device is successfully paired. Note: Scan the "Delete All Data" Delete All Data Upload statistics Note: Total Number of barcodes Upload data Note: Upload all barcodes scanned Inventory mode Inventory Mode In inventory mode, for long distance transmission, better use inventory mode. The data is stored directly in the scanner. If the memory is full, 3 continuous alarms will be sounds, and blue light will flash 3 times. *Immediate mode Immediate Mode In immediate mode, after the data transmission is successful, the scanner emits a short sound and the blue light flashes once. If scanner exceeds the transmission distance, data cannot be saved, there will be 3 continuous alarms and blue light will flashed 3 times accordingly. Pair setting Pair Method Factory default Communication *2.4G (Receiver) Upload Speed Setting Fast (Used in 2.4G wireless mode) Medium Low barcode, all the data in the storage willbe deleted and cannot be recovered,please make sure you have uploaded Wireless Barcode Scanner Setting Manual User Guide Steady red light: charging Red light off: fully charged or not connected to charge. Red light flashes: the battery is not installed or the battery is not installed properly. Blue light is always on: the wireless or wired connection is normal. Green light flashes quickly: the pairing status in 2.4G mode. Green and blue lights flash alternately: pairing status in HID mode.Green and blue lights flash slowly: Enter the upgrade state. time of the power management system Disable the data before deleting. Package:Barcode Scanner 1 unit, receiver 1 unit, USB cable 1piece,User Manual *Enable ( 2.4G mode: The pairing time is about 1 minute, if timeout but not paired, it willautomatically exit.) Display Power Matters needing attention: 1.Thunderbolt weather, please dismantle the 2.keep away from heat sources 3.Pay attention to waterproofing in Warning Sound Setting Disable sound Decoding sound Low Medinm *High *Wireless sound Enable Decoding sound *Disable Decoding sound Sleep Time Setting ON *1 minute 5 minute OFF Buzzer Description Sound type Description one long beep (low first high after ) Scanner on one long beep (high first low after) one short beep(low)one short beep (low first high after) one short beep (high first low after) 3 times short beep(low)5 times short beep(low) and stop scanning Two short beep(low) Two short beep(high) Scanner offScan code or pair receiver or wireless connected Save scanning data inScan setting code 2.4G send data fail or Power off 2.4G Disconnect Scan the Settings code which does not work successfully.storage. cache is full 1. Please read this user manual carefully before using barcode scanner. 2. The charging voltage of the scanner is 5V. Please use our original connection cable ensure normal operation of scanner. 3. Our company reserves all rights and reserves the right to make changes the product to improve its reliability, functionality, or the right of design. equipment power supply and all connect-ons to avoid thunderbolt damage. and keep ventilation. storage, transportation and operation environment. With “*” marked below are the default settings. Wireless Software ver Barcode scan setting FCC Warning StatementChanges or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures: ‐‐ Reorient or relocate the receiving antenna.‐‐ Increase the separation between the equipment and receiver.‐‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.‐‐ Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Co m Ad d Pr o Mo d Pr o We act We an d issu our Sig Na m Title Com mpany: AM dress: 820 oduct Name del Numbe oduct Desc authorize M on our beha declare tha d certificatio ues concern behalf shal nature: me: e: mpany: AM MBIR TECH Sivert Driv e e: Barcode er(s): BR300 ription: Ba MiCOM Lab alf on all ma at MiCOM L n of equipm ning the app ll have the s Michael C President AMBIR TE MBIR T Agen NOLOGY IN e, Wood Da Scanner 0, BR200 rcode Sca n bs Inc., 575 atters conce Labs Inc. is ment to the r proval applic same effect Crincoli t ECHNOLOG TECHN nt Auth NC. ale, Illinois, nner Boulder C o erning the c allowed to f regulatory a cation. Any t as acts of GY INC. NOLOG horizat 60191 Unite ourt, Pleasa certification forward all i agencies as and all acts our own. GY INC tion ed States anton, Califo of above na information s required a s carried ou Date: C. ornia 94566 amed equip related to t nd to discu ut by MiCOM Sept. 29, 20 6, USA, to pment. the approva ss any M Labs on 022 al

Office o Federa 7435 O Columb USA Subjec t FCC ID To Wh o Pursua are req u docume These d propriet might b In addi t in Title busine s authoriz For 4 O For 1 It is ou r corresp docume authoriz Sincer e Signatu Name: Title: P r of Engineeri l Communic Oakland Mills bia, MD 210 t; Request f D: 2AH6G-B om It May C nt to the pro uesting the ents from pu documents tary informa be harmful to Schemat Block Di Parts Lis Operatio Tune-up tional to abo 47 CFR §2 ss sensitive zed devices External Test Set Internal P User Ma 45 days, pu OR 180 days pu r understand pondence du ents and thi zation is iss ely, ure: Michael Cr i resident A ing Techno cations Com s Road 046 for Confiden BR200BR30 Concern, ovisions of t Commissio ublic disclos contain det ation in ope o our comp tic Diagram agram st onal Descrip Procedure ove mention .803 and th informatio n s, we reque Photos tup Photos Photos anual rsuant to P u ursuantto KD ding that all uring the ce s informatio sued. incoli MBIR T logy mmission ntiality 00 the Commis on to withho sure indefin tailed syste ration of th e any and wo m ption ned docume e importatio n remains c st Short Te ublic Notice DB 726920 l measurem ertification re on will be av TECHNO ssion’s rule old the follow nitely. m and equi e equipmen ould give co ents, in orde on rules in T confidential rm Confide e DA 04-170 0 D01. ment test rep eview proce vailable for OLOGY s Title 47 S wing attach pment desc nt. The publ ompetitors a er to comply Title 47 CFR until the act ntiality of th 05. ports, FCC ess cannot public revi e INC. Sections §0. hment(s) as criptions an ic disclosu r an unfair ad y with the m R §2.1204, tual market he following ID label for be granted ew once the Date: Sept 457 and §0 confidentia d are consi re of these d vantage in marketing re while ensu ting of newly attachmen mat and as confide n e grant of eq t. 29, 2022 0.459, we al dered as documents the market . egulations ring that y t(s); ntial quipment .

Model Difference Declaration To Whom It May Concern, We, AMBIR TECHNOLOGY INC. (Barcode Scanner), Model Number: BR300, BR200;All model’s the function, software and electric circuit are the same, only with a product color and model named different. Test sample model: BR200 Please contact me if you have any question. Name: Michael Crincoli Date: Sept. 29, 2022 Title: President Signature of applicant:

Annex A External Photos Report No.: HK2209164151‐E Page 1 of 4 Report No.: HK2209164151‐E Page 2 of 4 Report No.: HK2209164151‐E Page 3 of 4 Report No.: HK2209164151‐E Page 4 of 4

FCC ID LABEL: Ca. 10mm x 40mm label location 2AH6G-BR200BR300

Annex B Internal Photos Report No.: HK2209164151‐E Page 1 of 4 Report No.: HK2209164151‐E Page 2 of 4 Report No.: HK2209164151‐E Page 3 of 4 Antenna Report No.: HK2209164151‐E Page 4 of 5 Report No.: HK2209164151‐E Page 5 of 5

Report No.: BL-SZ1950141-744 1 / 14 Revision History Version Issue Date Revisions Rev. 01 May. 05, 2019 Initial Issue Report No.: BL-SZ1950141-744 2 / 14 TABLE OF CONTENTS 1 Administrative Data (GENERAL INFORMATION) ........................................................................................... 3 1.1 Identification of the Testing Laboratory .............................................................................................. 3 1.2 Identification of the Responsible Testing Location .............................................................................. 3 1.3 Laboratory Condition ......................................................................................................................... 3 1.4 Announce .......................................................................................................................................... 3 2 PRODUCT INFORMATION ............................................................................................................................ 5 2.1 Applicant Information ......................................................................................................................... 5 2.2 Manufacturer Information .................................................................................................................. 5 2.3 Factory Information ........................................................................................................................... 5 2.4 General Description for Equipment under Test (EUT) ........................................................................ 5 2.5 Technical Information ........................................................................................................................ 5 3 SUMMARY OF TEST RESULTS .................................................................................................................... 6 3.1 Test Standards .................................................................................................................................. 6 3.2 Test Verdict........................................................................................................................................ 6 3.3 Test Uncertainty ................................................................................................................................ 6 4 GENERAL TEST CONFIGURATIONS ............................................................................................................ 7 4.1 Test Condition ................................................................................................................................... 7 4.2 Test Equipment List ........................................................................................................................... 7 4.3 Test Setup ......................................................................................................................................... 7 ANNEX A TEST RESULTS ................................................................................................................................ 8 A.1 Gain and Efficiency .............................................................................................................................. 8 ANNEX B RADIATION PATTERN ................................................................................................................... 10 ANNEX C TEST SETUP PHOTO ..................................................................................................................... 13 ANNEX D EUT PHOTO ................................................................................................................................... 14 Report No.: BL-SZ1950141-744 3 / 14 1 Administrative Data (GENERAL INFORMATION) 1.1 Identification of the Testing Laboratory Company Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1st FL, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Identification of the Responsible Testing Location Test Location 1 Shenzhen BALUN Technology Co., Ltd. Address Block B, 1st FL, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Accreditation Certificate The laboratory is a testing organization accredited by China National Accreditation Service for Conformity Assessment (CNAS) according to ISO/IEC 17025. The accreditation certificate number is L6791. The laboratory is a testing organization accredited by China Metrology Accreditation (CMA). The accreditation certificate number is 2014192290Z. Description All measurement facilities used to collect the measurement data are located at Block B, FL 1, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 518055 1.3 Laboratory Condition Ambient Temperature 19°C to 25°C Ambient Relative Humidity 45% to 55% Ambient Pressure 100 kPa to 102 kPa 1.4 Announce (1) The test report reference to the report template version v2.2. (2) The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. (3) The test report is invalid if there is any evidence and/or falsification. (4) The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. (5) This document may not be altered or revised in any way unless done so by BALUN and all revisions are duly noted in the revisions section. (6) Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without Report No.: BL-SZ1950141-744 4 / 14 prior written approval from the laboratory. Report No.: BL-SZ1950141-744 5 / 14 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant Shenzhen LightWind Technology Co., LTD Address Room 24J, Qinghai Tower, No.7043, BeiHuan Road, Futian, Sh…

Text truncated - open the document above for the full version.

Page 1 of 27 Report No.: HK2209164151-E FCC TEST REPORT Test report On Behalf of AMBIR TECHNOLOGY INC. For Barcode Scanner Model No.: BR300, BR200 FCC ID: 2AH6G-BR200BR300 Prepared for : AMBIR TECHNOLOGY INC. 820 Sivert Drive, Wood Dale, Illinois, 60191 United States Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Aug. 16, 2022 ~ Sept. 22, 2022 Date of Report: Sept. 22, 2022 Report Number: HK2209164151-E Applican Address . Manufac t Address . Product d Trade Ma Product n Model and Standard This publi Shenzhen the mater assume li to its pla c Date of T Date (s) o Date of Is Test Resu t’s name ... .................. ture's Nam .................. description ark: name ........... d/or type re ds ............... ication may n HUAK Te rial. Shenzh ability for da cement and est ............. of performan ssue ............ ult ............... T e T e Au TE ............... : ............... : me ............ : ............... : n ................. : eference . : ............... : y be reprodu esting Techn hen HUAK T amages res context. .................. nce of tests .................. .................. esting Engin echnical Ma uthorized S EST RES AMBIR TE 820 Sivert AMBIR TE 820 Sivert N/A Barcode S BR300, BR FCC Rules ANSI C63. uced in who nology Co., Testing Tec sulting from ............. : ............. : ............. : ............. : neer : anager : ignatory : Page 2 o ULT CER ECHNOLOG t Drive, Woo ECHNOLOG t Drive, Woo Scanner R200 s and Regu .10: 2013 ole or in pa , Ltd. is ack chnology C the reader ' Aug. 16, 20 Sept. 22, 20 Pass of 27 RTIFICAT GY INC. od Dale, Illin GY INC. od Dale, Illin lations Part rt for non-co knowledged o., Ltd. take 's interpreta 022 ~ Sept. 2 022 (Gary Q i (Eden H (Jason Z h Report TION nois, 60191 nois, 60191 15 Subpar t ommercial d as copyrig es no respo ation of the r 22, 2022 ian) Hu) hou) No.: HK2209 United Sta United Sta t C Section purposes a ght owner a onsibility fo reproduced 9164151-E ates ates 15.249 as long as th and source r and will n d material du he of not ue Page 3 of 27 Report No.: HK2209164151-E Table of Contents Page 1 . TEST SUMMARY 5 2 . GENERAL INFORMATION 6 2.1 GENERAL DESCRIPTION OF EUT 6 2.2 Carrier Frequency of Channels 7 2.3 Operation of EUT during testing 7 2.4 DESCRIPTION OF TEST SETUP 8 2.5 MEASUREMENT INSTRUMENTS LIST 9 3 . CONDUCTED EMISSIONS TEST 10 3.1 Conducted Power Line Emission Limit 10 3.2 Test Setup 10 3.3 Test Procedure 10 3.4 Test Result 11 4 RADIATED EMISSION TEST 13 4.1 Radiation Limit 13 4.2 Test Setup 13 4.3 Test Procedure 14 4.4 Test Result 14 5 BAND EDGE 20 5.1 Limits 20 5.2 Test Procedure 20 5.3 Test Result 21 6 OCCUPIED BANDWIDTH MEASUREMENT 23 6.1 Test Setup 23 6.2 Test Procedure 23 6.3 Measurement Equipment Used 23 6.4 Test Result 23 7 ANTENNA REQUIREMENT 25 8 PHOTOGRAPH OF TEST 26 9 PHOTOS OF THE EUT 27 Page 4 of 27 Report No.: HK2209164151-E ** Modified History ** Revision Description Issued Data Remark Revision 1.0 Initial Test Report Release Sept. 22, 2022 Jason Zhou Page 5 of 27 Report No.: HK2209164151-E 1. TEST SUMMARY 1.1 TEST PROCEDURES AND RESULTS DESCRIPTION OF TEST RESULT CONDUCTED EMISSIONS TEST §15.207 COMPLIANT RADIATED EMISSION TEST §15.249 (a) / §15.209 COMPLIANT BAND EDGE §15.249 (d)/ §15.209 COMPLIANT OCCUPIED BANDWIDTH MEASUREMENT §15.215 (c) COMPLIANT ANTENNA REQUIREMENT §15.203 COMPLIANT 1.2 INFORMATION OF THE TEST LABORATORY Shenzhen HUAK Testing Technology Co., Ltd. Add.: 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Testing Laboratory Authorization： A2LA Accreditation Code is 4781.01. FCC Designation Number is CN1229. Canada IC CAB identifier is CN0045. CNAS Registration Number is L9589. 1.3 MEASUREMENT UNCERTAINTY Measurement Uncertainty Conducted Emission Expanded Uncertainty =2.23dB, k=2 Radiated emission expanded uncertainty(9kHz-30MHz) = 3.08dB, k=2 Radiated emission expanded uncertainty(30MHz-1000MHz)= 4.42dB, k=2 Radiated emission expanded uncertainty(Above 1GHz) = 4.06dB, k=2 Page 6 of 27 Report No.: HK2209164151-E 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Equipment Barcode Scanner Model Name BR300 Serial Model BR200 Model Difference All model’s the function, software and electric circuit are the same, only with a product color and model named different. Test sample model: BR200 FCC ID 2AH6G-BR200BR300 Antenna Type Spring Antenna Antenna Gain 0.5dBi Equipment Barcode Scanner Operation frequency 2410MHz-2470MHz Number of Channels 61CH Modulation Type GFSK Power Source DC 5V from Adapter or DC 7.4V from Battery Power Rating DC 5V from Adapter or DC 7.4V from Battery Page 7 of 27 Report No.: HK2209164151-E 2.2 Carrier Frequency of Channels Description of Channel: Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) 1 2410 17 2426 33 2442 49 2458 2 2411 18 2427 34 2443 50 2459 3 2412 19 2428 35 2444 51 2460 4 2413 20 2429 36 2445 52 2461 5 2414 21 2430 37 2446 53 2462 6 2415 22 2431 38 2447 54 2463 7 2416 23 2432 39 2448 55 2464 8 2417 24 2433 40 2449 56 2465 9 2418 25 2434 41 2450 57 2466 10 2419 26 2435 42 2451 58 2467 11 2420 27 2436 43 2452 59 2468 12 2421 28 2437 44 2453 60 2469 13 2422 29 2438 45 2454 61 2470 14 2423 30 2439 46 2455 15 2424 31 2440 47 2456 16 2425 32 2441 48 2457 2.3 Operation of EUT during testing Operating Mode The mode is used: Transmitting mode Low Channel: 2402MHz Middle Channel: 2440MHz High Channel: 2470MHz Page 8 of 27 Report No.: HK2209164151-E 2.4 DESCRIPTION OF TEST SETUP Operation of EUT during conducted testing and Under 1 GHz radiation testing: AC Main Operation of EUT during Above 1 GHz radiation testing: ● PC information Model: TP00067A Input: DC20V, 2.25-3.25A Output: 5VDC, 0.5A The sample was placed (0.8m below 1GHz, 1.5m above 1GHz) above the ground …

Text truncated - open the document above for the full version.

Radiated Emissions Conducted Emission