2AHCL-TEK006Power Bank

FCC Statement This device complies with part 15 and part 18 of the FCC Rules. Operation is Subject To the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user's authority to operate this equipment. Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 and part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and candidate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Increase the separation between the equipment and any other radio device. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

DONGGUAN ARUN INDUSTRIAL CO.,LTD Agent Authorization Company: DONGGUAN ARUN INDUSTRIAL CO.,LTD Address: NO.18 Xinfeng Changlong Huangjiang, Dongguan City, Guangdong Province, P.R.China Product Name: Power Bank Trade Mark: N/A Model Number(s): TEK006 FCC ID: 2AHCL-TEK006 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2020-10-21 Name: Jim Zeng Title: Certification Consultant Company: DONGGUAN ARUN INDUSTRIAL CO.,LTD

DONGGUAN ARUN INDUSTRIAL CO.,LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020-10-21 Subject; Request for Confidentiality FCC ID: 2AHCL-TEK006 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description BOM Software Security Requirements In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name / Title: Jim Zeng / Certification Consultant Company: DONGGUAN ARUN INDUSTRIAL CO.,LTD Address: NO.18 Xinfeng Changlong Huangjiang, Dongguan City, Guangdong Province, P.R.China Phone: 0769-83622930 Fax: / E-Mail: [email protected]

FCC ID: 2AHCL-TEK006 Fig. 1 Fig. 2 FCC ID: 2AHCL-TEK006 Fig. 3 Fig. 4 FCC ID: 2AHCL-TEK006 Fig. 5 Fig. 6

_____________________________________________________________________________________________________ LABEL AND LOCATION (Size: L6.23cm x 2.98cm) Label Location

Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104,Building 7 and 8,DCC Cultural and Creative Garden No.98,Pingxin North Road,Shangmugu,Pinghu Street, Longgang District,Shenzhen,Guangdong,China TEST REPORT FCC Rules and Regulations Part 15 Subpart C (Section 15.209), ANSI C63.10: 2013 Report Reference No. .....................: FCC ID ..............................................: GTS20200926004-1-1 2AHCL-TEK006 Compiled by ( position+printed name+signature) .. : File administrators Peter Xiao Supervised by ( position+printed name+signature) .. : Test Engineer Moon Tan Approved by ( position+printed name+signature) .. : Manager Simon Hu Date of issue ..................................... : Oct.15, 2020 Representative Laboratory Name . : Shenzhen Global Test Service Co.,Ltd. Address ............................................ : No.7-101 and 8A-104,Building 7 and 8,DCC Cultural and Creative Garden No.98,Pingxin North Road,Shangmugu,Pinghu Street,Longgang District,Shenzhen,Guangdong,China Applicant’s name ............................ : DONGGUAN ARUN INDUSTRIAL CO.,LTD Address ............................................ : NO.18 Xinfeng Changlong Huangjiang, Dongguan City, Guangdong Province, P.R.China Test specification ...........................: Standard ........................................... : FCC Rules and Regulations Part 15 Subpart C (Section 15.209), ANSI C63.10: 2013 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .....................: Power Bank Trade Mark ....................................... : N/A Manufacturer .................................... : DONGGUAN ARUN INDUSTRIAL CO.,LTD Model/Type reference....................... : TEK006 List Model ......................................... : N/A Modulation Type ............................... : Load modulation Operation Frequency ........................ : 110-205KHz Ratings ............................................. : Input: DC 5.0V/3.0A , DC 9.0V/2.0A , DC12V/1.5A Type -C Output: DC 5.0V/3.0A , DC 9.0V/2.0A , DC12V/1.5A USB -A Output: DC 5.0V/3.0A , DC 9.0V/2.0A , DC12V/1.5A Wireless Output:5W/7.5W/10W Total Output: DC 5.0V/ 3.0A Result................................................ : PASS Report No.: GTS20200926004-1-1 Page 2 of 26 T E S T R E P O R T Test Report No. : GTS20200926004-1-1 Oct.15, 2020 ______________________________________________________________________________________________ Date of issue Equipment under Test : Power Bank Model /Type : TEK006 Listed Models : N/A Applicant : DONGGUAN ARUN INDUSTRIAL CO.,LTD Address : NO.18 Xinfeng Changlong Huangjiang, Dongguan City, Guangdong Province, P.R.China Manufacturer DONGGUAN ARUN INDUSTRIAL CO.,LTD Address : NO.18 Xinfeng Changlong Huangjiang, Dongguan City, Guangdong Province, P.R.China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20200926004-1-1 Page 3 of 26 Contents 1. T E S T S T A N D A R D S ....................................................................... 4 2. S U M M A R Y .................................................................................. 5 2.1. General Remarks ......................................................................................................................................... 5 2.2. Product Description .................................................................................................................................... 5 2.3. Equipment Under Test ................................................................................................................................ 6 2.4. EUT Exercise Software ............................................................................................................................... 6 2.5. Special Accessories .................................................................................................................................... 6 2.6. External I/O Cable ........................................................................................................................................ 6 2.7. Modifications ............................................................................................................................................... 6 3. T E S T E N V I R O N M E N T ................................................................... 7 3.1. Address of the test laboratory ................................................................................................................... 7 3.2. Test Facility .................................................................................................................................................. 7 3.3. Test Description .......................................................................................................................................... 7 3.4. Statement of the measurement uncertainty ............................................................................................. 7 3.5. Equipments Used during the Test ............................................................................................................. 8 4. T E S T C O N D I T I O N S A N D R E S U L T S .................................................. 9 4.1. AC Power Conducted Emission ................................................................................................................. 9 4.2. Radiated Emission ..........................................................…

Text truncated - open the document above for the full version.

FCC ID: 2AHCL-TEK006 _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 2 1. TEST SETUP PHOTOGRAPHS 1.1. Photo of Radiated Emissions Measurement Fig. 1 Fig. 2 FCC ID: 2AHCL-TEK006 _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 2 1.2. Photo of Conducted Emissions Measurement