2AHDSTC300-01Wireless Smart Charger

REV.JUL20881_PS881EX_en_US 2. Place stick on the charger, insert batteries, press the button to activate your charger and the stick will start charging. Please charge the stick for a minimum of 2 hours before your first use. 3. Press the button on the charger to activate the stick. Select the stick in your App and choose your desired cook. 4. You can NOW remove the stick from the charger and insert it completely into the meat, up to the ceramic handle. The stick should be in the thickest part, away from fat and bones. 5. The charger LED will continue to flash indicating range extender mode is active. Keep the charger within 3 feet of your stick to extend the range. Once your cook is ready, let your meat rest and carefully remove the stick from the meat. Be careful it might be hot! 6. After enjoying your meat, allow the stick to cool down, then clean it to look like new and replace on charger. It will auto turn off when not in use. 7. The stick will auto-charge while on the charger so it's ready to use for your next cook. 1. Open your preferred mobile app store. Search and download "The MeatStick® App" . You can also find these instructions on the app. FIRST TIME SETUP (2 AA batteries not included) # # # # Smallest Wireless Meat Thermometer Thank you for choosing MiniX by TMS If you need help, please contact support: [email protected] #mymeatstick The LED light will turn off after the stick is completely charged. The MeatStick® Ceramic Handle (max: 572°F/300°C) Stick lasts 8+ hours on a full charge. Power Indicator Power Button Charger Touchpoints Temperature Sensor (max: 185°F/85°C) If not within a heat source, the stick will turn off automatically after 30 minutes. Position the stick completely into the meat. This allows the stick to withstand the high temperatures. The sensor can measure and withstand up to 185°F/85°C and the ceramic handle can withstand up to 572°F/300° C. Exceeding the recommended temperatures may damage the stick. Cooks over direct heat may cause fire flare-ups that can instantly exceed 900°F/500°C. Please be aware and remove the stick to avoid damaging it. The MiniX by TMS is compatible with The MeatStick WiFi Bridge. Do not use the stick in a microwave or pressure cooker. The stick is fully waterproof, sous-vide proof, dishwasher and deep-fryer safe. The stick will be very hot after each use. Do not touch it with your bare hands. To ensure uninterrupted connectivity, we recommend the MiniX charger to be as close as possible to the stick (within 6ft/1.8m). All The MeatStick® products are covered by a 1-year limited warranty. For more details: themeatstick.com/warranty The Mini by TMS is modular, you can create the set that you want. Visit our website to add more sticks or add-ons to your collection! Protect our planet by recycling paper & plastic packaging at designated facilities.

Grandex International Corporation Agent Authorization Company: Grandex International Corporation Address: 4F, No.527, Zhongzheng Rd., Xindian Dist., New Taipei City 23148, Taiwan (R.O.C.) Product Name: Wireless Smart Charger Model Number(s): TC300ex, PS881ex(PS880+TC300ex), PS891ex(PS890+TC300ex) Product Description: Wireless Smart Charger We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own.

Differences Declaration To whom concern, We company Grandex International Corporation hereby declares: The product models TC300ex, PS881ex(PS880+TC300ex), PS891ex(PS890+TC300ex) are identical in the same PCB layout, interior structure and electrical circuits, The only difference are color, package and model name for commercial purpose.

FCC ID APP電子標籤位置

Global United Technology Services Co., Ltd. Report No.: GTS202007000213F01 Authorized Signature: Robinson Lo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 28 TEST REPORT Applicant: Grandex International Corporation Address of Applicant: 4F, No.527, Zhongzheng Rd., Xindian Dist., New Taipei City 23148, Taiwan (R.O.C.) Manufacturer/Factory: Grandex International Corporation Address of Manufacturer/Factory: 4F, No.527, Zhongzheng Rd., Xindian Dist., New Taipei City 23148, Taiwan (R.O.C.) Equipment Under Test (EUT) Product Name: Wireless Smart Charger Model No.: TC300ex, PS881ex(PS880+TC300ex), PS891ex(PS890+TC300ex) Trade Mark: Grandex/The MeatStick FCC ID: 2AHDSTC300-01 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.249 Date of sample receipt: July 23, 2020 Date of Test: July 24-August 03, 2020 Date of report issued: August 04, 2020 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS202007000213F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 28 2 Version Version No. Date Description 00 August 04, 2020 Original Prepared By: Date: August 04, 2020 Project Engineer Check By: Date: August 04, 2020 Reviewer Report No.: GTS202007000213F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 28 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 4.1 MEASUREMENT UNCERTAINTY ............................................................................................................ 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE ........................................................................................................................................ 7 5.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 7 5.4 DEVIATION FROM STANDARDS ............................................................................................................. 7 5.5 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................... 7 5.6 TEST FACILITY .................................................................................................................................... 7 5.7 TEST LOCATION ................................................................................................................................. 7 5.8 ADDITIONAL INSTRUCTIONS ................................................................................................................. 7 6 TEST INSTRUMENTS LIST ..................................................................................................................... 8 7 TEST RESULTS AND MEASUREMENT DATA .................................................................................... 10 7.1 ANTENNA REQUIREMENT ................................................................................................................... 10 7.2 RADIATED EMISSION METHOD ........................................................................................................... 11 7.2.1 Field Strength of The Fundamental Signal ................................................................................ 13 7.2.2 Spurious emissions .................................................................................................................... 14 7.2.3 Bandedge emissions.................................................................................................................. 22 7.3 20DB OCCUPY BANDWIDTH .............................................................................................................. 26 8 TEST SETUP PHOTO ............................................................................................................................ 28 9 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 28 Report No.: GTS202007000213F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 28 4 Test Summary Test Item Section in CFR 47 Result Antenna requirement 15.203 Pass AC Power Line Conducted Emission 15.207 Pass Field strength of the fundamental signal 15.249 (a) Pass Spurious emissions 15.249 (a) (d)/15.209 Pass Band edge 15.249 (d)/15.205 …

Text truncated - open the document above for the full version.

Radiated Emission