2AHFT499Smart Watch

Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances. If you experience discomfort or skin irritation when wearing your smart watch, then we recommend you try cleaning your device. Sometimes residue or foreign materials build up around your device and may aggravate your skin. It's also possible that you are not wearing the watch correctly. We recommend making sure to clean and adjust your watch regularly for a more comfortable fit. Caution: • If you experience skin irritation when wearing your watch, please refrain from wearing, and wait two to three days to see if your symptoms ease. If symptoms persist or worsen, please consult a physician. • If you have eczema, allergies or asthma, you may be more likely to experience a skin irritation or allergy from a wearable device. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. The device meets the EU ROHS criterion. Please refer to IEC 62321, EU ROHS Directive 2011/65/EU and revised directive. CAUTION The device has been evaluated to meet general RF exposure statement. The device can be used in portable exposure condition without restriction – Risk of explosion if the battery is replaced by an incorrect type; – disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; – leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; – a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. Wear and Care Some users may experience skin irritation when using this product. To reduce the potential for irritation,please follow four simple wear and care tips: (1) keep it clean; (2) keep it dry; (3) do not wear it too tightly, and keep the wearing gap as one finger; (4) after long-term wearing, remove the device in time to relax the wrist; (5) after exercise, if your wrists sweat, please clean and dry your wrists and watches before wearing again. The residual sweat components will corrode the watch. It is recommended to regularly use soap or hand sanitizer to clean the watch. In case of skin allergy, please take off your watch and Seek medical advice in time. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2)This device must accept any interference, including interference that may cause undesired operation of the device. L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1)L'appareil ne doit pas produire de brouillage; 2)L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. IDW15 Smart Watch Oper ation Manual Thanks for pur chasing this product. Please read this Manual carefull y bef or e use . 4.SM.IDW15XX000 V1.0 This number is for internal use only Scan the QR code for more function information Model Bat ter y capacity Charging Time Waterpr oof level Oper ating Temperatur e Pr oduct Fr equency IDW15 3.8V/300mAh 2.5hours IP68 0°C-60°C 2402-2480MHz Scr een T ype Charging Voltage Bat ter y Lif e Weight of Pr oduct Bluetooth Version Max. transmission Power Consumption 1.8"-inch color screen 5V±0.2v 7D ay 40.2g BLE5.3 4dBm IDW15说明书 材质80G哑粉 尺寸展开 280X200mm 折后70X00mm 3折页 1. Product overview Physical button operation Short press 1. To return. 2. To wake the screen when it is off. Long press 1. To turn on the watch. 2. Under the power on state, long press for 8s to restart. Quick start guide Magnetic charging contacts Heart rate sensor Speaker Physical button Microphone 2. Turning on/off Turning on Whilst the watch is off, it automatically turns on when you put it on charge. Note: Charge the watch to activate it before first use. Th…

Text truncated - open the document above for the full version.

Date:04/17/2018VCB_F-01:OperatingProceduresForm–FCCConfidentialityv02Page1of1 ShenzhenDOIntelligentTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequestregardingapplicationforcertificationofFCCID:2AHFT499 PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequest confidentialtreatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitTypeFileName 1.BlockDiagram, 2.Schematics, 3.OperationalDescription 1.2AHFT499-Blockdiagram 2.2AHFT499-SCH 3.2AHFT499-Operationaldescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarily releasedtothepublic.Thepublicdisclosureofthesematerialsmaybeharmfultothe applicantandprovideunjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateofthe Grantforthisapplication. PursuanttoDA04-1705June15,2004oftheCommission’spublicnotice,wealso requesttemporaryconfidentialtreatmentofinformationaccompanyingthisapplication asoutlinedbelowforaninitialperiodofxxxx(ie-“45”,“90”or“180”)days: ExhibitTypeFileName N/AN/A Signature: Contactname:WuDajun Companyname: ShenzhenDOIntelligentTechnologyCo.,Ltd. Address:11thFloor,3#Building,GuoleTechPark,LirongRoad,Dalang,LonghuaDistrict,Shenzhen, China

Date:04/17/2018VCB_F-01:OperatingProceduresForm–FCCAuthorizationv02Page1of1 ShenzhenDOIntelligentTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 1435OaklandMillsRoad Columbia,MD21046 Date:2022-12-29 SUBJECT:FCCApplicationfor(FCCID:2AHFT499) ToWhomItMayConcern: We,theundersigned,herebyauthorizeYoyoZhouin ShenzhenHuaxiaTesting TechnologyCo.,Ltdat1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad, DalangStreet,LonghuaDistrict,Shenzhen,Chinaonourbehalf,toapplytotheFederal CommunicationsCommissiononourequipment.Anyandallactscarriedoutby ShenzhenHuaxiaTestingTechnologyCo.,Ltd onourbehalfshallhavethesame effectasactsofourown. ThisistoadvisethatweareinfullcompliancewiththeAnti-DrugAbuseAct.We, theapplicant,arenotsubjecttoadenialoffederalbenefitspursuanttoSection 5301oftheAnti-DrugActof1988,21USC853a,andnopartytotheapplicationis subjecttoadenialoffederalbenefitspursuanttothatsection. Sincerely, (MustbesignedbythepersonthatislistedontheFCCWebsite) Signature: Contactname:WuDajun Companyname:ShenzhenDOIntelligentTechnologyCo.,Ltd. Address:11thFloor,3#Building,GuoleTechPark,LirongRoad,Dalang,LonghuaDistrict,Shenzhen,China

ShenzhenDOIntelligentTechnologyCo.,Ltd ModelConfirmationLetter We,(ShenzhenDOIntelligentTechnologyCo.,Ltd)certifytheproduct: SmartWatch ModelNo.:IDW15,IDW15Plus,IDW15PlusBT. Theirelectricalcircuitdesign,layout,componentsusedandinternalwiringare identical,Onlythemodelisdifferent. Signiture: GranteeContact:WuDajun CompanyName:ShenzhenDOIntelligentTechnologyCo.,Ltd Date:2022-12-29

Externalphotos

IDW15底壳镭雕 F C C I D : 2 A H F T 4 9 9 I C : 2 3 0 2 3 - 2 A H F T 4 9 9 IDW15 3mm

Internalphotos Thefourscreendifferencesareinternalwiring,layout,supplier, componentLCDIDresistorresistancevaluethesechangesdoesnotaffect theradioperformance. TM10,TM11,TM12,TM13

ShenzhenHuaxiaTestingTechnologyCo.,Ltd 1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad,DalangStreet,LonghuaDistrict, Shenzhen,China Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V05 ReportTemplateRevisionDate:2021-11-03 RFExposureEvaluationReport Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonlyto thesample(s)tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. ReportNo.:CQASZ20221101941E-03 Applicant:ShenzhenDOIntelligentTechnologyCo.,Ltd AddressofApplicant:11thFloor,3#Building,GuoleTechPark,LirongRoad,Dalang,Longhua District,Shenzhen,China EquipmentUnderTest(EUT): EUTName:SmartWatch ModelNo.:IDW15,IDW15Plus,IDW15PlusBT TestModelNo.:IDW15 BrandName:IDO FCCID:2AHFT499 Standards: 47CFRPart1.1307 47CFRPart2.1093 KDB447498D04InterimGeneralRFExposureGuidancev01 DateofReceipt:2022-11-16 DateofTest:2022-11-21to2022-11-24 DateofIssue:2022-12-30 TestResult:PASS* *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove. TestedBy: (LewisZhou) ReviewedBy: (TimoLei) ApprovedBy: (JackAi) ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20221101941E-03 Page:2of8 1Version RevisionHistoryOfReport ReportNo.Version Description IssueDate CQASZ20221101941E-03Rev.01 Initialreport 2022-12-30 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20221101941E-03 Page:3of8 2Contents Page 1VERSION............................................................................................................................................................................2 2CONTENTS........................................................................................................................................................................3 ..................................................................................................................................................................................................3 3GENERALINFORMATION..............................................................................................................................................4 3.1CLIENTINFORMATION...................................................................................................................................................4 3.2GENERALDESCRIPTIONOFEUT...................................................................................................................................4 3.3GENERALDESCRIPTIONOFBLE...................................................................................................................................4 3.4GENERALDESCRIPTIONOFBT......................................................................................................................................4 4SAREVALUATION...........................................................................................................................................................5 4.1RFEXPOSURECOMPLIANCEREQUIREMENT.................................................................................................................5 4.1.1StandardRequirement......................................................................................................................................5 4.1.2Limits....................................................................................................................................................................5 4.1.3EUTRFExposure..............................................................................................................................................7 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20221101941E-03 Page:4of8 3GeneralInformation 3.1ClientInformation Applicant:ShenzhenDOIntelligentTechnologyCo.,Ltd AddressofApplicant:11thFloor,3#Building,GuoleTechPark,LirongRoad,Dalang,Longhua District,Shenzhen,China Manufacturer:ShenzhenDOIntelligentTechnologyCo.,Ltd AddressofManufacturer:11thFloor,3#Building,GuoleTechPark,LirongRoad,Dalang,Longhua District,Shenzhen,China Factory:ShenzhenDOIntelligentTechnologyCo.,Ltd AddressofFactory:11thFloor,3#Building,GuoleTechPark,LirongRoad,Dalang,Longhua District,Shenzhen,China 3.2GeneralDescriptionofEUT ProductName: SmartWatch ModelNo.: IDW15,IDW15Plus,IDW15PlusBT TestModelNo.: IDW15 TradeMark: IDO SoftwareVersion: IDW15_V1.0.1 HardwareVersion: V1.1 PowerSupply: Li-ionbatteryDC3.8V300mAh,ChargebyDC5Vforadapter 3.3GeneralDescriptionofBLE OperationFrequency:2402MHz~2480MHz ModulationType:GFSK TransferRate:1Mbps/2Mbps NumberofChannel:40 ProductType:MobilePortableFixLocation AntennaType: FPC AntennaGain: -0.18dBi 3.4GeneralDescriptionofBT OperationFrequency:2402MHz~2480MHz ModulationType:GFSK,π/4DQPSK,8DPSK TransferRate:1Mbps/2Mbps/3Mbps NumberofChannel:79 ProductType:MobilePortableFixLocation AntennaType: FPC AntennaGain: -0.18dBi ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20221101941E-03 Page:5of8 4SAREvaluation 4.1RFExposureComplianceRequirement 4.1.1StandardRequirement 447498D04InterimGeneralRFExposureGuidancev01 3.2.SARTestReductionGuidance SARtestreductionprocedures[Glossary]allowusingaparticularsetoftestdataasrepresentative ofother,similar,testconditions.Thismaybeappliedfordatawithindifferenttestpositions(e.g.body, head,extremity),wirelessmodes(e.g.Wi-Fi,cellular),andfrequencybands.Thistestreductionprocess providesfortheuseoftestdataforonespecificchannel,whilereferencingtothosedatafordemonstrating complianceinotherrequiredchannelsforeachtestpositionofanexposurecondition,withintheoperating modeofafrequencyband.Thisislimitedspecificallytowhenthereported1-gor10-gSARforthemid- bandorhighestoutputpowerchannelmeetsanyofthefollowingconditions. 4.1.2Limits SAR-basedthresholdsarederivedbasedonfrequency,power,andseparationdistanceoftheRF source.Theformuladefinesthethresholdsingeneralforeitheravailablemaximumtimeaveragedpoweror maximumtime-averagedERP,whicheverisgreater. IftheERPofadeviceisnoteasilydetermined,suchasforaportabledevicew…

Text truncated - open the document above for the full version.

Page 1 Admit it The product description: The manufacturer： Welletronics Communication Technology Limited Project type： IDW13 The name of the material： Bluetooth RF antenna Specification/Color： white Material code： 3.01.lDW13F1000 Sign the sample date： 2022.12.08 The version number： V1.0 note： The attachment：  Description of electrical and mechanical properties (Specification)  Manufacturing flow chart  QCEngineering drawing  The sample  CPK report  Full size measurement report  Reliability test report  The packing way  Raw material list report /RoHS report/HF/REACH Supplier sign and approve artificial： audit： approval： The above shall be filled in by the supplier and the following shall be filled in by Aidu department Confirm the content Verify the results Confirm person/da te Technical confirmation column Supplier quality ☐ RoHS material ☐ no RoHS material ☐Meet REACH requirements ☐ Meet halogen-free requirement s ☐Other Environmen tal Requiremen ts ID of Design Department ☐The customer request ID ☐Color confirmation ☐Surface process confirmatio n ☐Shell, hardware, key material Structural engineer ☐ Confirm the size of 2D drawing files ☐Specifications and technical requirements ☐Focus on size marking control ☐Electrical performance parameter ☐Adapter validation ☐function ☐Shell, hardware, key material ☐The effect Hardware engineer ☐ Confirm the size of 2D drawing files ☐Specifications and technical requirements ☐Focus on size marking control ☐Electrical performance parameter ☐Adapter validation ☐function ☐Shell, hardware, key material ☐The effect R&d quality ☐Test standard confirmation ☐appearance ☐Standardization of dimension marking (key dimensions) ☐ Reliability verification ☐Adapter validation ☐function ☐The effect Final confirmation Project Manager ☐Acknowledge the completeness of the documents ☐Standardization of dimension marking (key dimensions) ☐Specifications and technical requirements ☐appearance ☐Electrical performance parameter ☐function ☐The effect Admitted conditions： ☐ Official recognition ☐ Set limit to admit ☐ Refuse to admit Distribution department： ☐ IQC ☐ supplier ☐ The customer ☐ after-sales☐ SQE/ Document control ☐ other ________ QF-QMP-QA01-01 Confidential Informatio Page 2 Catalog One 、The cover ··············································································· 1 Two、 Directory..................................................................................2 Three 、Change history ······································································· 3 Four、 Electrical characteristics...........................................................4-6 Five、The 2D drawings..........................................................7 Six、Full-scale measurement report.........................................................8 Seven、Cpk Report...........................................................................9 Eight 、The RoHS report .................................................................. 10 Nine、Salt spray test .....................................................................11 Te n、 High and Low Temperature Testing ............................................. 12 Eleven、Material quality proves ......................................................13 Twelve、Shipment packaging ............................................................14 Confidential Informatio Page 3 Three 、Change history Change of resume Serial number Date of change entry name Edition Change content Remarks 1 Dec 8, 2022 IDW13 BT antenna V1.0 nothing New issue Confidential Informatio Page 4 Four、 Electrical characteristics 1.Antenna Structure Figure antenna structure 2. Test Results BT-Return Loss/VSWR BT-Return Loss/VSWR Confidential Informatio Page 5 3. Test Repor No source by space test efficiency/pattern Match The antenna E1ement Va1ue E1 1.2PF E2 0Ω E3 E4 Freq Effi Effi Gain (MHz) (dB) (%) (dBi) 2400 -4.14 38.5 -0.18 2410 -4.56 35.0 -0.61 2420 -4.62 34.5 -0.42 2430 -4.8 33.1 -0.56 2440 -4.8 33.1 -0.69 2450 -4.95 32.0 -0.80 2460 -5.21 30.1 -1.11 2470 -5.26 29.8 -1.15 2480 -5.41 28.8 -1.34 Freq Effi Effi Gain (MHz) (dB) (%) (dBi) 2400 -9.66 10.8 -6.01 2410 -9.97 10.1 -6.36 2420 -9.94 10.1 -6.38 2430 -10.05 9.9 -6.53 2440 -9.98 10.0 -6.49 2450 -10.07 9.8 -6.71 2460 -10.28 9.4 -6.86 2470 -10.26 9.4 -6.84 2480 -10.35 9.2 -7.06 Free space Add the arm Confidential Informatio Page 6 3. The direction of figure Add the arm Free space Confidential Informatio Page 7 Five、The 2D drawings Confidential Informatio Page 8 Six、Full-scale measurement report Rev DIM. # DIMENSION DRAWING ZONE + TOL. - TOL. NOTE SAMPLE 1 SAMPLE 2 SAMPLE 3 SAMPLE 4 SAMPLE 5 UPPER LOWER 0%-25% 25%-50% 50%-75% 75%-100% 100%+ Re-Measure Accept Fix Tool Accept With Variance DIMEN SION + TOL. - TOL. 1 1.05 0.30 0.30 1.03 1.04 1.01 1.05 1.07 7% 13% X 2 1.80 0.30 0.30 1.79 1.79 1.77 1.80 1.80 0% 10% X 3 1.15 0.30 0.30 1.14 1.13 1.23 1.14 1.12 27% 10% X 4 0.15 0.05 0.05 0.15 0.15 0.15 0.15 0.15 0% 0% X 5 7.26 0.15 0.15 7.25 7.29 7.29 7.23 7.28 20% 20% X 6 1.85 0.15 0.15 1.89 1.81 1.84 1.88 1.87 27% 27% X 7 1.10 0.10 0.10 1.13 1.07 1.10 1.13 1.11 30% 30% X 8 9.59 0.15 0.15 9.61 9.58 9.59 9.56 9.59 13% 20% X 9 13.30 0.15 0.15 13.33 13.30 13.34 13.27 13.27 27% 20% X 101112131415161718192021 WTT Material Code Vendor Material name FPC Part NO 759-075-01A01 ACCEPTABLE VARIANCE Full-scale measurement report Tool Number Comments Part Name IDW13 BT antenna Date 07/Dec/22 R:A MEASURED DIMENSION % TOLERANCE USED DISPOSITION Cav. Number Unit INCHES MILLIMETERS Confidential Informatio Page 9 Seven、Cpk Report Vendor Inspected Inches/MM Material Name Material Code Date 59 7.2613.30 0.150.15 -0.15-0.15 7.4113.45 7.1113.15 7.2513.33 7.2913.30 7.2913.34 7.2313.27 7.2813.27 7.2813.35 7.2013.32 7.2213.30 7.2813.28 7.2813.28 7.2513.27 7.2213.25 7.2013.26 7.2313.24 7.2013.28 7.2413.33 7.2113.32 7.2813.34 7.2813.27 7.2013.25 7.2313.26 7.2013.24 7.2413.28 7.2113.33 7.2613.32 7.2613.34 7.2413.27 7.2713.25 7.2813.30 7.2013.32 7.…

Text truncated - open the document above for the full version.

ShenzhenHuaxiaTestingTechnologyCo.,Ltd. 1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad,DalangStreet,LonghuaDistrict, Shenzhen,China Telephone:+86-755-26544737 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V05 ReportTemplateRevisionDate:2021-11-03 TESTREPORT Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonlytothe sample(s)tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. ReportNo.:CQASZ20221101941E-02 Applicant:ShenzhenDOIntelligentTechnologyCo.,Ltd AddressofApplicant: 11thFloor,3#Building,GuoleTechPark,LirongRoad,Dalang,LonghuaDistrict, Shenzhen,China EquipmentUnderTest(EUT): EUTName:SmartWatch ModelNo.:IDW15,IDW15Plus,IDW15PlusBT TestModelNo.:IDW15 BrandName:IDO FCCID:2AHFT499 Standards:47CFRPart15.247 DateofReceipt:2022-11-16 DateofTest:2022-11-21to2022-11-24 DateofIssue:2022-12-30 TestResult:Pass* *Intheconfigurationtested,theEUTcompiledwiththestandardswithabove. TestedBy: (LewisZhou) ReviewedBy: (TimoLei) ApprovedBy: (JackAi) ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20221101941E-02 Page: 2 of 75 1Version RevisionHistoryofReport ReportNo.VersionDescriptionIssueDate CQASZ20221101941E-02Rev.01Initialreport2022-12-30 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20221101941E-02 Page: 3 of 75 2TestSummary TestItemStandardTestMethodClass/SeverityResult Antennarequirement47CFRPart15.247Part15.203Pass OccupiedBandwidth47CFRPart15.247 ANSIC63.10-2013,section 11.8 47CFR 15.247(a)(2) Pass MaximumConducted OutputPower 47CFRPart15.247 ANSIC63.10-2013,section 11.9.1 47CFR 15.247(b)(3) Pass PowerSpectral Density 47CFRPart15.247 ANSIC63.10-2013,section 11.10 47CFR 15.247(e) Pass Emissionsinnon- restrictedfrequency bands 47CFRPart15.247 ANSIC63.10-2013section 11.11 47CFR 15.247(d) Pass Emissionsaroundthe fundamental 47CFRPart15.247 ANSIC63.10-2013section 6.6.4 47CFR 15.247(d) Pass Emissionsinrestricted frequencybands (below1GHz) 47CFRPart15.247 ANSIC63.10-2013section 6.6.4 47CFR 15.247(d) Pass Emissionsinrestricted frequencybands (above1GHz) 47CFRPart15.247 ANSIC63.10-2013section 6.6.4 47CFR 15.247(d) Pass ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20221101941E-02 Page: 4 of 75 3Contents Page 1VERSION.................................................................................................................................................................2 2TESTSUMMARY.....................................................................................................................................................3 3CONTENTS.............................................................................................................................................................4 4GENERALINFORMATION.....................................................................................................................................6 4.1CLIENTINFORMATION......................................................................................................................................6 4.2GENERALDESCRIPTIONOFEUT.....................................................................................................................6 4.3DESCRIPTIONOFSUPPORTUNITS...................................................................................................................6 4.4TESTMODE....................................................................................................................................................6 4.5TESTLOCATION..............................................................................................................................................8 4.6TESTFACILITY................................................................................................................................................8 4.7DEVIATIONFROMSTANDARDS..........................................................................................................................8 4.8ABNORMALITIESFROMSTANDARDCONDITION..................................................................................................8 4.9OTHERINFORMATIONREQUESTEDBYTHECUSTOMER.....................................................................................8 4.10MEASUREMENTUNCERTAINTY(95%CONFIDENCELEVELS,K=2)....................................................................9 5EQUIPMENTLIST.................................................................................................................................................10 6EVALUATIONRESULTS(EVALUATION)............................................................................................................13 6.1ANTENNAREQUIREMENT................................................................................................................................13 7RADIOSPECTRUMMATTERTESTRESULTS(RF)..........................................................................................13 7.1OCCUPIEDBANDWIDTH.................................................................................................................................13 7.1.1E.U.T.Operation:...............................................................................................................................14 7.1.2TestSetupDiagram:..........................................................................................................................14 7.1.3TestData:..........................................................................................................................................14 7.2MAXIMUMCONDUCTEDOUTPUTPOWER.......................................................................................................15 7.2.1E.U.T.Operation:...............................................................................................................................15 7.2.2TestSetupDiagram:..........................................................................................................................16 7.2…

Text truncated - open the document above for the full version.

ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20221101941E-02 Page: 61 of 75 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20221101941E-02 Page: 62 of 75 BLE_2M_Ant1_2480 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20221101941E-02 Page: 63 of 75 9.5AppendixE:Bandedgemeasurements 9.5.1TestResult TestModeAntennaChNameChannelRefLevel[dBm]Result[dBm]Limit[dBm]Verdict BLE_1MAnt1 Low2402-1.60-50.88≤-21.6PASS High2480-0.77-49.3≤-20.77PASS BLE_2MAnt1 Low2402-2.51-39.64≤-22.51PASS High2480-1.78-49.32≤-21.78PASS ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20221101941E-02 Page: 64 of 75 9.5.2TestGraphs BLE_1M_Ant1_Low_2402 BLE_1M_Ant1_High_2480 BLE_2M_Ant1_Low_2402 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20221101941E-02 Page: 65 of 75 BLE_2M_Ant1_High_2480 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20221101941E-02 Page: 66 of 75 9.6AppendixF:ConductedSpuriousEmission 9.6.1TestResult TestModeAntennaChannel FreqRange [MHz] RefLevel [dBm] Result[dBm]Limit[dBm]Verdict BLE_1MAnt1 2402 Reference-1.65-1.65---PASS 30~1000-1.65-58.28≤-21.65PASS 1000~26500-1.65-50.18≤-21.65PASS 2440 Reference-0.70-0.70---PASS 30~1000-0.70-59.13≤-20.7PASS 1000~26500-0.70-53.24≤-20.7PASS 2480 Reference-0.79-0.79---PASS 30~1000-0.79-59.08≤-20.79PASS 1000~26500-0.79-53.12≤-20.79PASS BLE_2MAnt1 2402 Reference-2.60-2.60---PASS 30~1000-2.60-57.8≤-22.6PASS 1000~26500-2.60-51.59≤-22.6PASS 2440 Reference-1.67-1.67---PASS 30~1000-1.67-59.79≤-21.67PASS 1000~26500-1.67-53.56≤-21.67PASS 2480 Reference-1.71-1.71---PASS 30~1000-1.71-59.71≤-21.71PASS 1000~26500-1.71-55.26≤-21.71PASS ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20221101941E-02 Page: 67 of 75 9.6.2TestGraphs BLE_1M_Ant1_2402_0~Reference BLE_1M_Ant1_2402_30~1000 BLE_1M_Ant1_2402_1000~26500 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20221101941E-02 Page: 68 of 75 BLE_1M_Ant1_2440_0~Reference BLE_1M_Ant1_2440_30~1000 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20221101941E-02 Page: 69 of 75 BLE_1M_Ant1_2440_1000~26500 BLE_1M_Ant1_2480_0~Reference ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20221101941E-02 Page: 70 of 75 BLE_1M_Ant1_2480_30~1000 BLE_1M_Ant1_2480_1000~26500 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20221101941E-02 Page: 71 of 75 BLE_2M_Ant1_2402_0~Reference BLE_2M_Ant1_2402_30~1000 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20221101941E-02 Page: 72 of 75 BLE_2M_Ant1_2402_1000~26500 BLE_2M_Ant1_2440_0~Reference ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20221101941E-02 Page: 73 of 75 BLE_2M_Ant1_2440_30~1000 BLE_2M_Ant1_2440_1000~26500 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20221101941E-02 Page: 74 of 75 BLE_2M_Ant1_2480_0~Reference BLE_2M_Ant1_2480_30~1000 ShenzhenH…

Text truncated - open the document above for the full version.