2AHRE-TI01Smart Remote Controller

User Guide Product Description The intelligent universal remote control is integrated in a large number of infrared code libraries, which can be used to add various infrared remote controls through this device. To realize intelligent application scenarios Pairing Idicator Reset Button Power Plug Preparation for use Mobile phone connection Wi-Fi Smart phone Wi-Fi Wireless Router Smart Remote Controller Wi-Fi Make sure both the mobile phone and the smart remote controller keep the same Wi-Fi network to ensure the effective connection between the mobile phone and the smart remote controller Install the “Smart Life”APP Step A .Find out “Smart Life”app in Apple app store, Google Play, or scan the QR code bellow and install it. The free app”Smart Life” is compatible with mobile devices the support IOS8.0 above, Android 4.4 above Step B .Enter the register interface, input the email address/phone number for getting the verification code to register an account. Please just login if you already have a Smart Life account. Access settings Connect the smart remote controller to the power supply, and connect to the family 2.4GHz band router through the network cable; Confirm that the network indicator (green light) is always on (if the indicator is in other states, long press the "reset button" until the green light is on) Make sure that the mobile phone is connected to the home 2.4GHz band router. At this time, the mobile phone and the remote controller are in the same LAN Open the "My Home" page of the “smart life ”app and click the add button "+" in the upper right corner of the page; Click "Gateway and other" on the left side of the page, and select the “universal remote controller”according to the icon; Follow the prompts to operate the device to connect to the network, after adding it, you can find the device in the "My Home" list Reset Button Product specification Packing list Smart Remote Controller X 1 Data cable X 1 User Manual X 1 Screw X 3 Screw plug X 3 Fixed bracket X 1 Product name Model Input Operation temperature Working humidity Product Size Wireless connection Smart Remote Controller TI01 5V 1A -10 C~55 C 10%-90%RH(No condensation) ¢90X20mm Wi-Fi Smart Remote Controller Wi-Fi FCC NOTE： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation . The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. RF warning statement: To maintain compliance with FCC's RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Reference N Waltek Tes http://www EXHIBI EUT View 1 EUT View 2 No.: WTX20X sting Group w.semtest.co T 2 - EUT 1 2 X08055259W (Shenzhen) m.cn T EXTER W Co., Ltd. RNAL PH HOTOGR APHS Reference N Waltek Tes http://www EUT View 3 EUT View 4 No.: WTX20X sting Group w.semtest.co 3 4 X08055259W (Shenzhen) m.cn W Co., Ltd. Reference N Waltek Tes http://www EUT View 5 EUT View 6 No.: WTX20X sting Group w.semtest.co 5 6 X08055259W (Shenzhen) m.cn W Co., Ltd. Reference N Waltek Tes http://www EUT View 7 No.: WTX20X sting Group w.semtest.co 7 X08055259W (Shenzhen) m.cn W Co., Ltd.

Reference N Waltek Tes http://www EXHIBI Proposed Specificatio n it is visible durable to r expected lif e Proposed No.: WTX20X sting Group w.semtest.co T 1 - PRO FCC ID La ns: The label or easily acc emain fully l etime. Label Loca X08055259W (Shenzhen) m.cn ODUCT L abel Forma shall be secu cessible to th legible and in ation on EU W Co., Ltd. LABELIN at urely affixed t he user, and ntact on the UT FCC NG to a permane shall not be device in al l ID Label Lo ently attached readily detac l normal cond cation d part of the d chable. The l ditions of use device, in a lo label shall be e throughout ocation where e sufficiently t the device’s e y s

Reference N Waltek Tes http://www EXHIBI EUT Housi n Solder Boa r No.: WTX20X sting Group w.semtest.co T 3 - EUT ng and Boar rd-Compone X08055259W (Shenzhen) m.cn T INTER rd View 1 ent View 1 W Co., Ltd. NAL PHO OTOGRA APHS Reference N Waltek Tes http://www Solder Boa r Antenna V i No.: WTX20X sting Group w.semtest.co rd-Compone iew X08055259W (Shenzhen) m.cn ent View 2 W Co., Ltd. Wi-Fi Antenna

1. MAXIMUM PERMISSIBLE EXPOSURE (MPE) 1.1 General Information Client Information Applicant: SHEN ZHEN HIDIN TECHNOLOGY CO., LTD Address of applicant: 6th Floor, No. 1301-59, Yinxing Industrial Park, Guanlan, Longhua District, Shenzhen, Guangdong China Manufacturer: SHEN ZHEN HIDIN TECHNOLOGY CO., LTD Address of manufacturer: 6th Floor, No. 1301-59, Yinxing Industrial Park, Guanlan, Longhua District, Shenzhen, Guangdong China General Description of EUT: Product Name: Smart Remote Controller Brand Name: / Model No.: TI01 Adding Model(s): / FCC ID: 2AHRE-TI01 Rated Voltage: USB DC5V Technical Characteristics of EUT: Support Standards: 802.11b, 802.11g, 802.11n Frequency Range: 2412-2462MHz for 802.11b/g/n-HT20 RF Output Power: 15.03dBm (Conducted) Type of Modulation: DSSS,OFDM Data Rate: 1-11Mbps, 6-54Mbps, up to 72.2Mbps Quantity of Channels: 11 for 802.11b/g/n-HT20 Channel Separation: 5MHz Type of Antenna: Integral Antenna Antenna Gain: 3.0dBi 1.2 Standard Applicable According to §1.1307(b)(1) and KDB 447498 D01 General RF Exposure Guidance v06, system operating under the provisions of this section shall be operating in a manner that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. (a) Limits for Occupational / Controlled Exposure Frequency range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Times | E | 2 , | H | 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f)* 6 30-300 61.4 0.163 1.0 6 300-1500 / / F/300 6 1500-100000 / / 5 6 (b) Limits for General Population / Uncontrolled Exposure Frequency range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Times | E | 2 , | H | 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 / / F/1500 30 1500-100000 / / 1 30 Note: f = frequency in MHz: * = Plane-wave equivalents power density 1.3 MPE Calculation Method S = (30*P*G) / (377*R 2 ) S = power density (in appropriate units, e.g., mw/cm 2 ) P = power input to the antenna (in appropriate units, e.g., mw) G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor is normally numeric gain. R = distance to the center of radiation of the antenna (in appropriate units, e.g., cm) 1.4 MPE Calculation Result Maximum Tune-Up output power: 16 (dBm) Maximum peak output power at antenna input terminal: 39.81(mW) Prediction distance: >20(cm) Prediction frequency: 2412(MHz) Antenna gain: 3.0(dBi) Directional gain (numeric gain): 2.00 The worst case is power density at prediction frequency at 20cm: 0.0158 (mw/cm 2 ) MPE limit for general population exposure at prediction frequency: 1 (mw/cm 2 ) Result: Pass

Waltek Testing Group (Shenzhen) Co., Ltd. http://www.semtest.com.cn Page 1 of 57 TEST REPORT Reference No. .................... : WTX20X08055259W FCC ID ................................ : 2AHRE-TI01 Applicant ........................... : SHEN ZHEN HIDIN TECHNOLOGY CO., LTD Address ............................. : 6th Floor, No. 1301-59, Yinxing Industrial Park, Guanlan, Longhua District, Shenzhen, Guangdong China Product Name ................... : Smart Remote Controller Test Model. ........................ : TI01 Standards .......................... : FCC Part 15.247 Date of Receipt sample .... : Aug.13, 2020 Date of Test........................ : Aug.13, 2020 to Aug.26, 2020 Date of Issue ..................... : Aug.26, 2020 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group (Shenzhen) Co., Ltd. Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao'an District, Shenzhen, Guangdong, China Tel.: +86-755-33663308 Fax.: +86-755-33663309 Tested by: Reviewed By: Approved & Authorized By: Jason Su / Project Engineer Lion Cai / RF Manager Silin Chen / Manager Reference No.: WTX20X08055259W Page 2 of 57 Waltek Testing Group (Shenzhen) Co., Ltd. http://www.semtest.com.cn TABLE OF CONTENTS 1. GENERAL INFORMATION ................................................................................................................................... 4 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ............................................................................... 4 1.2 TEST STANDARDS ................................................................................................................................................... 5 1.3 TEST METHODOLOGY ............................................................................................................................................. 5 1.4 TEST FACILITY ....................................................................................................................................................... 5 1.5 EUT SETUP AND TEST MODE ................................................................................................................................. 6 1.6 MEASUREMENT UNCERTAINTY .............................................................................................................................. 7 1.7 TEST EQUIPMENT LIST AND DETAILS ..................................................................................................................... 8 2. SUMMARY OF TEST RESULTS ......................................................................................................................... 10 3. RF EXPOSURE ....................................................................................................................................................... 11 3.1 STANDARD APPLICABLE ....................................................................................................................................... 11 3.2 TEST RESULT........................................................................................................................................................ 11 4. ANTENNA REQUIREMENT ................................................................................................................................ 12 4.1 STANDARD APPLICABLE ....................................................................................................................................... 12 4.2 EVALUATION INFORMATION ................................................................................................................................ 12 5. POWER SPECTRAL DENSITY ........................................................................................................................... 13 5.1 STANDARD APPLICABLE ....................................................................................................................................... 13 5.2 TEST SETUP BLOCK DIAGRAM ............................................................................................................................. 13 5.3 TEST PROCEDURE ................................................................................................................................................. 13 5.4 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 13 6. DTS BANDWIDTH ................................................................................................................................................. 18 6.1 STANDARD APPLICABLE ....................................................................................................................................... 18 6.2 TEST SETUP BLOCK DIAGRAM ............................................................................................................................. 18 6.3 TEST PROCEDURE ................................................................................................................................................. 18 6.4 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 18 7. RF OUTPUT POWER ............................................................................................................................................ 23 7.1 STANDARD APPLICABLE ....................................................................................................................................... 23 7.2 TEST SETUP BLOCK DIAGRAM ..................................................................…

Text truncated - open the document above for the full version.

Reference N Waltek Tes http://www EXHIBI Conducted Radiation E No.: WTX20X sting Group w.semtest.co T 4 - TES Emission Te Emission Tes X08055259W (Shenzhen) m.cn ST SETUP est Setup st Setup (Belo W Co., Ltd. P PHOTO ow 30MHz) OGRAPH HS Reference N Waltek Tes http://www Radiation E Radiation E No.: WTX20X sting Group w.semtest.co Emission Tes Emission Tes X08055259W (Shenzhen) m.cn st Setup (30M st Setup (1GH W Co., Ltd. MHz to 1GHz Hz to 18GHz z) z) Reference N Waltek Tes http://www Radiation E No.: WTX20X sting Group w.semtest.co Emission Tes X08055259W (Shenzhen) m.cn st Setup (Abo W Co., Ltd. ove 18GHz)