2AHZ5KKMN2Smartphone

1 CUBOT User Manual Smartphone CUBOT KINGKONG MINI 2 Shenzhen Huafurui Technology Co., Ltd. 2 Table of Contents Safety Information ............................................................. 4 Introduction ......................................................................... 6 Call Functions ..................................................................... 7 Contacts ............................................................................... 9 Message ............................................................................. 12 FM Radio ............................................................................ 17 Camera ................................................................................ 23 3 Gallery ................................................................................. 25 Music ................................................................................... 27 Sound Recorder ............................................................... 27 Alarm Clock ....................................................................... 29 Play Store ........................................................................... 30 Settings............................................................................... 32 Storage ............................................................................... 38 FCC Rules Compliance ................................................... 40 IC Notice ............................................................................. 44 4 Safety Information Please carefully read the iterms bellow: Use Safely Do not use the phone in situations where it might cause danger. Transportation Safety Please observe all transportation laws and regulations. Please drive with both hands on the wheel. DO NOT TEXT AND DRIVE Hospitals Please follow limitations. 5 Please turn off your mobile phone when near medical instruments. Airports Remember to follow all airport and flight safety regulations. Please do not use your phone during flight. Toxic Chemicals Do not use your mobile phone around fuels or chemicals. Hazard Do not use in hazardous areas where explosions may occur. Accessories and Batteries Use only Blu authorized batteries and accessories. Backup Remember to keep a written record of all important information. Water Your phone is not waterproof. Keep it away from water and liquids. 6 SOS Emergency Calls Make sure your mobile phone is switched on and in a service area. In home screen, tap the phone key and dial 911 and send. Introduction Power On and Off On - Please ensure the SIM card has been properly inserted into the phone. Long press the Power key to switch on the phone. Off - In standby mode, long press on Power key until an options menu appears. Select 7 Power Off in the menu and confirm Security You may set a security lock feature as a security measure for the phone. For further information regarding password locks, password revision and other functions please enter into the security option in system settings. Call Functions At the dial keyboard, enter the phone number and then click the dial key. If dialing an extension, you may click the dial pad icon in the bottom of the screen to open the interface and enter the number of the extension. You may also press and hold the 0 key to add a (+) sign when adding an international dialing prefix. history 8 Every telephone number called and received will be saved in the history. All numbers in the history can be dialed directly by clicking the CALL BACK on the screen. When the number appears on the list, click it to view details. Call Options 9 There are different options that can be used in the history and dialing interface. You may press the MORE while in the dial interface and adjust speed dial and call settings. In the dialing interface, you may press the search button to browse through contacts list or set default contact resources. Contacts 10 Enter: Click on the applications menu and select contacts. • The default display is the phone contacts and SIM card contacts. • The contacts are organized alphabetically by default. Add Contact 11 Click the Search icon to enter the contact search interface.  Any numbers or letters associated with any of the contacts  saved in the list will be shown in the search results. Add New Contact 1. Click the add contact icon (+) to add contact. 2. Select to save your contacts to the Google TM account, the phone or the SIM card. 3. You may enter different contact details which include adding a picture, name, telephone number, group, address, and email among other options. 4. Click to finish and save contact. 12 Messages You may use this function to exchange text messages and multimedia messages with your 13 family and friends. The messages to and from the same contact or phone number will be saved into a single conversation so you may see the entire message history conveniently. Send an SMS Application Menu » Messaging » New message (or shortcut icon) 14 1. Click to enter recipient (You may enter contacts from contact book or enter a new number) 2. Compose Message 3. Send Send an MMS When creating message, the default message style is SMS. The message will automatically convert to MMS when adding an attachment. 1. Click the attachment icon in the messaging interface. 2. Click to add attachments and create an MMS message. Internet Browser Menu Functions •Recent tab • After browsing through multiple pages, this option will return the user to the previous page. Windows • You may view all windows open by clicking the windows icon in the upper right part of the browser. 15 Bookmarks • Click the save to Bookmarks option to make the current URL as a saved Bookmark. • Click Bookmarks/History to opened saved bookmarks. Find on page: Search current page. Share page: Select to share the current page. Bookmarks/History: Show your browsing history and view the most visited pages. Settings: Contains a variety of browser settings. 16 17 FM Radio FM Radio T…

Text truncated - open the document above for the full version.

Shenzhen Huafurui Technology Co., Ltd. Company: Shenzhen Huafurui Technology Co., Ltd. Address: Unit 1401 &1402, 14/F, Jinqi zhigu mansion (No. 4 building of Chongwen Garden), Crossing of the Liuxian street and Tangling road, Taoyuan street, Nanshan district, Shenzhen,P.R. China Product Name: Smartphone Model Number(s): KINGKONG MINI 2 Product Description: Smartphone We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2020-10-28 Name: Paul Liu Title: Manager Company: Shenzhen Huafurui Technology Co., Ltd.

Shenzhen Huafurui Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020-10-28 Subject; Request for Confidentiality FCC ID: 2AHZ5KKMN2 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Paul Liu Title: Manager

Report No: CCISE200901901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2009019 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 49 of 62 8 EUT Constructional Details 9 Report No: CCISE200901901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2009019 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 50 of 62 Report No: CCISE200901901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2009019 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 51 of 62 Report No: CCISE200901901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2009019 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 52 of 62 Report No: CCISE200901901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2009019 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 53 of 62

label location label location

Report No: CCISE200901901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2009019 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 54 of 62 Report No: CCISE200901901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2009019 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 55 of 62 Report No: CCISE200901901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2009019 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 56 of 62 Report No: CCISE200901901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2009019 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 57 of 62 Report No: CCISE200901901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2009019 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 58 of 62 Report No: CCISE200901901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2009019 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 59 of 62 Report No: CCISE200901901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2009019 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 60 of 62 Report No: CCISE200901901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2009019 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 61 of 62 Report No: CCISE200901901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2009019 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 62 of 62 ------End of report------

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCISE200902001 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page FCC SAR REPORT Applicant: Shenzhen Huafurui Technology Co., Ltd. Address of Applicant: Unit 1401 14/F, Jin qi zhi gu mansion Liu xian street ,Xili, Nan shan district Shenzhen China Equipment Under Test (EUT) Product Name: Smartphone Model No.: KINGKONG MINI 2 Trade mark CUBOT FCC ID: 2AHZ5KKMN2 Applicable standards: FCC 47 CFR Part 2.1093 Date of Test: 14 Oct., 2020 ~ 19 Oct., 2020 Test Result: Maximum Reported 1-g SAR (W/kg) Head: 0.429 Body: 0.565 Hotspot: 0.565 Report No: CCISE200902001 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2009020 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 2 of 186 2 Version Version No. Date Description 00 30 Oct., 2020 Original Tested by: Date: 30 Oct., 2020 Report Clerk Reviewed by: Date: 30 Oct., 2020 Project Engineer Report No: CCISE200902001 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2009020 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 3 of 186 3 Contents 1 COV ER P AGE ................................................................................................................................................................................. 1 2 VERSION........................................................................................................................................................................................... 2 3 CONTENTS ...................................................................................................................................................................................... 3 4 SAR RES ULTS SUM MARY ....................................................................................................................................................... 5 5 GENERAL INFORMATION ........................................................................................................................................................ 7 5.1 CLIENT INFORMATION....................................................................................................................................................................... 7 5.2 GENERAL DESCRIPTION OF EUT ..................................................................................................................................................... 7 5.3 MA XI MUM RF OUTPUT POWER........................................................................................................................................................ 8 5.4 ENVIRONMENT OF TEST SITE........................................................................................................................................................... 9 5.5 TEST SA MP LE PLAN ......................................................................................................................................................................... 9 5.6 TEST LOCA TION................................................................................................................................................................................ 9 6 INTRODUCTION...........................................................................................................................................................................10 6.1 INTRODUCTION ............................................................................................................................................................................... 10 6.2 SAR DEFINITION ............................................................................................................................................................................ 10 7 RF EXP OSURE LIMITS .............................................................................................................................................................11 7.1 UNCONTROLLED ENVIRONMENT .................................................................................................................................................... 11 7.2 CONTROLLED ENVIRONMENT ......................................................................................................................................................... 11 7.3 RF EXPO SURE LIMITS .................................................................................................................................................................... 11 8 SAR M EASUREM ENT S YSTEM............................................................................................................................................12 8.1 E-FIEL…

Text truncated - open the document above for the full version.

Report No: CCISE200902001 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2009020 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 101 of 186 Test Laboratory: CCIS Date/Time: 10.19.2020 09:48:11 DUT: Smartphone; Type: KINGKONG MINI 2; Serial: 4# Communication System: UID 0, GSM (0); Frequency: 1909.8 MHz; Duty Cycle: 1:8.30042 Medium parameters used: f = 1909.8 MHz; σ = 1.411 S/m; ε r = 39.483; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN3924; ConvF(8.14, 8.14, 8.14); Calibrated: 09.23.2020;  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1373; Calibrated: 07.27.2020  Phantom: SAM 5.0; Type: QD000P40CD; Serial: TP:1765  Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) GSM 1900 Body Back/High Channel/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 2.820 V/m; Power Drift = 0.14 dB Peak SAR (extrapolated) = 0.165 W/kg SAR(1 g) = 0.086 W/kg; SAR(10 g) = 0.040 W/kg Maximum value of SAR (measured) = 0.130 W/kg GSM 1900 Body Back/High Channel/Area Scan (41x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.0897 W/kg 0 dB = 0.0897 W/kg = -10.47 dBW/kg Report No: CCISE200902001 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2009020 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 102 of 186 Test Laboratory: CCIS Date/Time: 10.15.2020 13:01:51 DUT: Smartphone; Type: KINGKONG MINI 2; Serial: 4# Communication System: UID 0, UMTS-FDD(WCDMA) (0); Frequency: 826.4 MHz; Duty Cycle: 1:1 Medium parameters used (interpolated): f = 826.4 MHz; σ = 0.884 S/m; ε r = 41.326; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN3924; ConvF(9.71, 9.71, 9.71); Calibrated: 09.23.2020;  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1373; Calibrated: 07.27.2020  Phantom: SAM 5.0; Type: QD000P40CD; Serial: TP:1765  Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) WCDMA 850 Body Back/Low Channel/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 18.11 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.352 W/kg SAR(1 g) = 0.248 W/kg; SAR(10 g) = 0.176 W/kg Maximum value of SAR (measured) = 0.312 W/kg WCDMA 850 Body Back/Low Channel/Area Scan (41x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.331 W/kg 0 dB = 0.331 W/kg = -4.80 dBW/kg Report No: CCISE200902001 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2009020 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 103 of 186 Test Laboratory: CCIS Date/Time: 10.19.2020 12:42:02 DUT: Smartphone; Type: KINGKONG MINI 2; Serial: 4# Communication System: UID 0, UMTS-FDD(WCDMA) (0); Frequency: 1732.6 MHz; Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1732.6 MHz; σ = 1.324 S/m; ε r = 40.461; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN3924; ConvF(8.43, 8.43, 8.43); Calibrated: 09.23.2020;  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1373; Calibrated: 07.27.2020  Phantom: SAM 5.0; Type: QD000P40CD; Serial: TP:1765  Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) WCDMA 1700 Body Back/Middle Channel/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 6.341 V/m; Power Drift = -0.28 dB Peak SAR (extrapolated) = 0.312 W/kg SAR(1 g) = 0.179 W/kg; SAR(10 g) = 0.108 W/kg Maximum value of SAR (measured) = 0.253 W/kg WCDMA 1700 Body Back/Middle Channel/Area Scan (41x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.308 W/kg 0 dB = 0.308 W/kg = -5.11 dBW/kg Report No: CCISE200902001 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2009020 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 104 of 186 Test Laboratory: CCIS Date/Time: 10.19.2020 14:59:57 DUT: Smartphone; Type: KINGKONG MINI 2; Serial: 4# Communication System: UID 0, UMTS-FDD(WCDMA) (0); Frequency: 1852.4 MHz; Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1852.4 MHz; σ = 1.372 S/m; ε r = 40.037; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN3924; ConvF(8.14, 8.14, 8.14); Calibrated: 09.23.2020;  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1373; Calibrated: 07.27.2020  Phantom: SAM 5.0; Type: QD000P40CD; Serial: TP:1765  Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) WCDMA 1900 Body Back/Low Channel/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.559 V/m; Power Drift = -0.28 dB Peak SAR (extrapolated) = 0.175 W/kg SAR(1 g) = 0.093 W/kg; SAR(10 g) = 0.043 W/kg Maximum value of SAR (measured) = 0.144 W/kg WCDMA 1900 Body Back/Low Channel/Area Scan (41x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.112 W/kg 0 dB = 0.112 W/kg = -9.51 dBW/kg Report No: CCISE200902001 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2009020 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 105 of 186 Test Laboratory: CCIS Date/Tim…

Text truncated - open the document above for the full version.

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCISE200901901V01 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certif ication mark. The manufacturer should ensure that all products in series production are in conf ormity w ith the product sample detailed in this report. This report may only be reproduced and distributed in f ull. If the product in this report is used in any conf iguration other than that detailed in the report, the manuf acturer must ensure the new system complies w ith all relevant standards. This document cannot be reproduced except in f ull, w ithout prior w ritten approval of the Company. Any unauthorized alteration, f orgery or f alsif ication of the content or appearance of this document is unlaw f ul and off enders may be prosecuted to the f ullest extent of the law . Unless otherw ise stated the results show n in this test report ref er only to the sample(s) tested and such sample(s) are retained f or 90 days only. 1. Cover Page FCC REPORT (GSM & WCDMA) Applicant: Shenzhen Huafurui Technology Co., Ltd. Address of Applicant: Unit 1401 14/F, Jin qi zhi gu mansion Liu xian street, Xili, Nan shan district Shenzhen China Equipment Under Test (EUT) Product Name: Smartphone Model No.: KINGKONG MINI 2 Trade mark: CUBOT FCC ID: 2AHZ5KKMN2 Applicable standards: FCC CFR Title 47 Part 2 FCC CFR Title 47 Part 22 Subpart H FCC CFR Title 47 Part 24 Subpart E FCC CFR Title 47 Part 27 Subpart L Date of sample receipt: 09 Sep., 2020 Date of Test: 10 Sep., to 09 Oct., 2020 Date of report issued: 02 Nov., 2020 Test Result: PASS* * In the configuration tested, the EUT complied with the standards specified above. Report No: CCISE200901901V01 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2009019 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 2 of 62 2. Version Version No. Date Description 00 10 Oct., 2020 Original 01 02 Nov., 2020 Update Applicant, Address, Manufacturer Address, Factory Address. Tested by: Date: 02 Nov., 2020 Test Engineer Reviewed by: Date: 02 Nov., 2020 Project Engineer Report No: CCISE200901901V01 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2009019 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 3 of 62 3. Contents Page 1. COV ER P AGE ................................................................................................................................................................................. 1 2. VERSION........................................................................................................................................................................................... 2 3. CONTENTS ...................................................................................................................................................................................... 3 4. TEST SUM MARY ........................................................................................................................................................................... 4 5. GENERAL INFORMATION ........................................................................................................................................................ 5 5.1 CLIENT INFORMATION............................................................................................................................................................. 5 5.2 GENERAL DESCRIPTION OF E.U. T. ..................................................................................................................................... 5 5.3 TEST ENVIRONMENT AND MODE ........................................................................................................................................... 7 5.4 DESCRIPTION OF SUPPORT UNITS ...................................................................................................................................... 7 5.5 MEASUREMENT UNCERTAINTY............................................................................................................................................. 7 5.6 ADDITIONS TO, DEVIATIONS, OR EXCLUSIONS FROM THE METHOD ............................................................................... 7 5.7 LABORATORY FACILITY .......................................................................................................................................................... 8 5.8 LABORATORY LOCATION........................................................................................................................................................ 8 5.9 TEST INSTRUMENTS LIST ....................................................................................................................................................... 8 6. TEST RES ULTS ............................................................................................................................................................................. 9 6.1 CONDUCTED OUTPUT POWER, ERP AND EIRP ..........................................................................................................…

Text truncated - open the document above for the full version.