2AHZ5N1Smartwatch

Please carefully read the user manual to ensure safety. Smart Watch User Manual English Deutsch Français Español Italiano Português Русский 01 08 15 22 29 36 43 日語50 An Introduction to Device Connect to the USB cable to charge before turning on the smart watch for the first time Power Key 1.Short press to brighten the screen 2.Long press to power on or off Function Key Charging Port Heart Rate Sensing Area English 01 APP Binding Press and hold the power button to start the machine, scan the QR code to download the GloryFit app for pairing , and set the watch in the app. Notes: 1. Please ensure that your mobile Bluetooth and GPS are turned on prior to connection; 2.Do not directly pair mobile Bluetooth with watch; 3.Support (1) Android 5.0 and more advanced systems; (2) IOS 10.0 and more advanced systems 1.Please turn your mobile Bluetooth and GPS on; 2.Click “Select device" in the app home page to start searching for devices Enter APP settingsSelect product type: N1 English 02 Long Press the dial plate for 3s to enter the change interface 1.Dial Plate Change Wear / Replace Interface Operation Instructions Note: 1. Too loose wearing may affect the data accuracy of heart rate; 2. Keep its surface clean and dry. Keep a certain distance away from carpus when wearing the watch, and adjust to a comfortable tightness. Switch on and remove wrist strap English 03 2. Interface Operation Remark: Slide right and left to enter the shortcut interaction interface; slide up to enter the message notification bar interface and slide down to enter the status settings bar. Remark: Slide right to exit under the sports mode. Find Your Phone, Brightness Adjustment, Do Not Disturb, About the Device (model, MAC/version) Main Interface Status Bar Message Bar Step Counting Sleep Heart Rate English 04 3. Function Introduction English Exercise (a variety of exercise modes are available, record the relevant parameters in the process of exercise ) Heart rate (measure current heart rate and record maximum and minimum data) Blood oxygen (monitoring oxygen concentration in blood) Status (record total steps, mileage, calories) Sleep (record total sleep time, sleep status and awake status) Music control (control the music playing in the mobile phone when connect to the mobile phone) 05 Notes for Safety and Product Information 1.Battery Alarm Do not damage battery via shape items, and do not disassemble it without authorization; Please keep great judgement and ensure driving safety. Do not carry out all activities that may divert your attention; malfunction may occur due to the interference of radio. Please contact the manufacturer to consult about detailed information. 2.Health Alarm 3.Traffic Safety Do not wear the watch when showing, diving and etc.; Do not wear the watch too tight, and keep the part that touches skin dry; Do not make kids or pets bite the device or its accessories to avoid any damage; The watch isn’t waterproof to acid, alkaline solutions, chemical reagent and other corrosive liquid; Please use the device within 0-35°C. Too high or too low environment temperature may bring device malfunctions. 4.Operating Environment If you are wearing implantable electronic devices such as pacemakers, please consult your doctor before heart rate measurement; Equipped optical heart rate sensor flashes green light. If you have epilepsy or are sensitive to flickering light, please consult your doctor whether you can use the product; The device will track your daily activities according to the sensor with the aim of offering data involving your daily activities such as steps, mileage, calorie, sleep and heart rate. Please note that they may not be completely accurate; The device, accessories, heart rate sensor and other related data are for entertainment and fitness, instead of medical purpose. They can’t help you diagnose, monitor, treat and prevent any disease or symptom. The heart rate data is for reference only. We aren’t liable for all results caused by data deviation. English 06 5.Declaration of Conformity The device conforms to FCC Part 15. All operations should match the following two conditions: 1)The device won’t lead to any harmful interference; 2)The device must accept all interference that can be received, including all interface that may lead to unnecessary operations. All changes or modifications that aren’t clearly approved by the compliance party may make users fail to operate the device. According to FCC Part 15, the device has passed test. It conforms to the limitations of class B digital device with the aim of offering reasonable protection and avoiding all harmful interference brought by equipment in the house. The device generates, uses and radiates r-f energy, so improper installation and use may bring harmful interference to radio communication. We can’t ensure that the installation in the specific environment may not generate any interface. If the device truly brings harmful interference to radio or television reception, please turn the device on or off to check. Encourage users to try the following measures to correct such interference: -- Relocate the receiving antenna; -- Increase the distance between the device and receiver; -- Connect the device to a socket (different from the socket used by receptor); -- Consult the agency or experienced technician to get help. 6.Safety Warnings Unauthorized battery change will lead to explode; Please handle used battery according to the following descriptions: Do not dispose old battery and residual wastes together. Please deal with them separately. It is free to handle them at the public collection station. Owners of old appliances should be responsible for bringing them to collection stations or similar stations. A little personal efforts make contributions to the recycle of valuable raw materials and handling of harmful substances. The device conforms to EU ROHS standards. Please refer to IEC 62321, EU ROHS directive 2011/65/EU and Recised directive. Engl…

Text truncated - open the document above for the full version.

S21031702005 Model: N1 N20190309V1 ATTACHMENT PHOTOGRAPHS OF EUT Photo 1 Photo 2 S21031702005 Model: N1 N20190309V1 Photo 3 Photo 4 S21031702005 Model: N1 N20190309V1 Photo 5 Photo 6

Model: N1 S/N：XXXXXXX X FCC ID：2AHZ5 Shenzhen Huaf u Unit 1401 &140 of the Liuxian St Shenzhen.PR,Ch Importer: X X X Labe S XXXXX N1 urui Technology Co., Ltd. 02, 14/F, Jinqi Zhigu Mans treet and Tangling Road, hina X X X Address: X X X el and its Loca Smartwatch sion (No. 4 Building of Ch Taoyuan Street, Nansha X X X X Made In China ation hongwen Garden), Cross n District, a ing

S21031702005 Model: N1 N20190309V1 Photo 7 Photo 8 S21031702005 Model: N1 N20190309V1 Photo 9 Photo 10 S21031702005 Model: N1 N20190309V1 Photo 11 Photo 12 S21031702005 Model: N1 N20190309V1 Photo 13 Photo 14 S21031702005 Model: N1 N20190309V1 Photo 15 Photo 16 BT Ant

version01 Shenzhen Huafurui Technology Co., Ltd Declaration concerning Antenna Specification It is hereby declared that the product Model No.: N1 FCC ID: 2AHZ5N1 fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for FPC antenna type(s) described below: Model No. of antenna: N/A Type of antenna: FPC Antenna Gain of the antenna: 1.93 dBi Frequency range: 2402MHz~2480MHz The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name: Shenzhen Huafurui Technology Co., Ltd Address: Unit 1401 14/F, Jin qi zhi gu mansion Liu xian street ,Xili, Nan shan district City: Shenzhen ZIP / Postal code: Country: China Name: Paul Liu Date: 2021/04/12 Signature:

FCC ID: 2AHZ5N1 Portable device According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB447498 D01 General RF Exposure Guidance V06 The 1-g SAR and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHZ)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f(GHZ) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. GFSK: Antenna Type : FPC Antenna Antenna Gain: 1.93 dBi Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n 1g SAR Exclusion threshold SAR test exclusion 2.402-7.133 0.194-7±1 -6 0.251<50.077863.00YES 2.44-6.983 0.200-6±1 -5 0.316<50.098793.00YES 2.480 -5.274 0.297-5±1 -4 0.398<50.125393.00YES 2.402-7.334 0.185-7±1 -6 0.251<50.077863.00YES 2.44-5.519 0.281-5±1 -4 0.398<50.124373.00YES 2.480-5.418 0.287-5±1 -4 0.398<50.125393.00YES GFSK (1M) GFSK (2M) Conclusion: For the max result : 0.12539≤ 3.0 for 1-g SAR, No SAR is required. Signature: Date: 2021-04-14 NAME AND TITLE (Please print or type): Alex Li /Manager COMPANY (Please print or type): Shenzhen NTEK Testing Technology Co., Ltd./ 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen 518126 P.R. China

Report No.: S21031702005001 Version.1.3 Page 1 of 61 RADIO TEST REPORT FCC ID: 2AHZ5N1 Product: Smartwatch Trade Mark: CUBOT/HAFURY Model No.: N1 Family Model: N/A Report No.: S21031702005001 Issue Date: Apr 08, 2021 Prepared for Shenzhen Huafurui Technology Co., Ltd. Unit 1401 & 1402, 14/F, Jinqi Zhigu Mansion (No. 4 Building of Chongwen Garden), Crossing of the Liuxian Street and Tangling Road, Taoyuan Street, Nanshan District, Shenzhen, P.R. China Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen 518126 P.R. China Tel. 400-800-6106, 0755-3699 5508 Website: http://www.ntek.org.cn Report No.: S21031702005001 Version.1.3 Page 2 of 61 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 3 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 4 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 5 3.1 FACILITIES..................................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 5 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ........................................................................................................... 9 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ....................................................................... 9 6.2 SUPPORT EQUIPMENT ............................................................................................................................... 10 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 11 7 TEST REQUIREMENTS .................................................................................................................................... 13 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 13 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 16 7.3 6DB BANDWIDTH ....................................................................................................................................... 25 7.4 DUTY CYCLE ............................................................................................................................................... 26 7.5 PEAK OUTPUT POWER .............................................................................................................................. 28 7.6 POWER SPECTRAL DENSITY ................................................................................................................... 29 7.7 CONDUCTED BAND EDGE MEASUREMENT......................................................................................... 31 7.8 SPURIOUS RF CONDUCTED EMISSIONS ................................................................................................ 32 7.9 ANTENNA APPLICATION .......................................................................................................................... 33 8 TEST RESULTS ................................................................................................................................................... 34 1M: ............................................................................................................................................................................. 34 8.1 MAXIMUM CONDUCTED OUTPUT POWER ........................................................................................... 34 8.2 OCCUPIED CHANNEL BANDWIDTH ....................................................................................................... 36 8.3 MAXIMUM POWER SPECTRAL DENSITY LEVEL ................................................................................. 40 8.4 BAND EDGE ................................................................................................................................................. 42 8.5 CONDUCTED RF SPURIOUS EMISSION .................................................................................................. 44 2M: ............................................................................................................................................................................. 48 8.6 MAXIMUM CONDUCTED OUTPUT POWER ........................................................................................... 48 8.7 OCCUPIED CHANNEL BANDWIDTH ....................................................................................................... 50 8.8 MAXIMUM POWER SPECTRAL DENSITY LEVEL ................................................................................. 54 8.9 BAND EDGE ................................................................................................................................................. 56 8.10 CONDUCTED RF SPURIOUS EMISSION .................................................................................................. 58 Report No.: S21031702005001 Version.1.3 Page 3 of 61 1 TEST RESULT CERTIFICATION Applicant’s name .........................…

Text truncated - open the document above for the full version.

FCC ID: 2AHZ5N1 Radiated Measurement Photos FCC ID: 2AHZ5N1 Conducted Measurement Photos