2AHZ5PTSmartphone

Phone Overview Get Started Install the USIM/SIM and the memory card Basic Operations Switch on Touch and hold the Power button until the phone switches on. Note: If you have enabled USIM/SIM locking in the Settings menu, enter the correct PIN number upon power-on before you use the phone. Caution: Three consecutive attempts of entering an incorrect PIN will lock the SIM card. If it is locked, use a PUK provided by the operator to unlock it. Switch off Touch and hold the “Power button” until the Phone Options screen displays. Tap " Power off ” to switch off the phone. Unlock Short press the “Power button” light up the screen, according to the clues of the screen interface can be unlocked. Touchscreen Usage Use your fingers to perform operations directly on icons, buttons, and the on-screen keypad. Tap/Touch/Click Tap the icon of an App to start it. Touch & Hold Touch and hold an item to display a pop-up menu of options. For example, go to Address Book, touch and hold a contact on the Address Book page, and a menu of options pops up. Drag Tap an item on the screen and drag it to another place. Slide/Sweep To sweep vertically or horizontally across the screen, you can view apps, pictures, and webpages in a convenient manner. Scroll Similar to sweeping, but faster. Pinch Put two fingers on the screen to pinch in or out an item, such as a webpage or picture. Home Screen 1. Status bar: allows you to view status icons and notices, such as signal, battery, current time and data service. 2. Notification bar: On the Home screen, tap the status bar and drag it down to display the notification bar. Tap this bar. Then you can view the notices. Touch the return button to switch back to the previous page. 3. App icon: Tap an app to open it. 4. Main menu: Drag it up to enter the app main menu. Phone Settings To display the Settings menu, tap the Settings icon directly. 1.SIM card: In the Settings menu, select WLAN to configure your radio network，choose SIM Card. You can then manage your SIM cards on the pop-up page. 2. Network: In the Settings menu, select WLAN to configure your radio network; or select Traffic usage to View the details of usage; or select Mobile Network configure data services of your phone 3. Sound: In the Settings menu, choose Sound. The allows you to set the volume, enable/disable vibration during ringing, and select ringtones for incoming calls and alarm clock, as well as enable/disable keypad touch sound effect, touch alert tone, and screen lock tone 4. Display: allows you to configure the brightness, wallpaper, automatic device rotation, sleep duration, and font size. 5. Security: In the Settings menu, choose Security. The Security page allows you to set the screen locking mode and USIM/SIM locking mode. 6. Application and notification: In the Settings menu, choose Apps. Then you can view or manage your apps. Note: Disable or unload certain apps if available space is less than 100MB. 7. Message: On the Message page, tap the Menu button and choose Settings, you can open and close message send prompt sound, you can enable/disable Message report obtain，view SMS in SIM. 8. Call: To display the Call Settings page, choose Settings on the Call page. Move/Uninstall apps 1. Access the App main menu from the Home screen. On the ALL App page, tap and hold an app to be put on the Home screen, and drag it left or right to locate it at a proper place. In this way, a desktop app is created. 2. On the All App page, tap and hold an app, and drag it to Uninstall on the desktop. In this way, the app is removed from the phone. Note: You are not allowed to uninstall basic apps of the phone. 3. On the All App page, tap and hold an app, Then select the application information，In this way details about the app is displayed. Call This phone allows you to make or answer a call, initiate an emergency call, and launch a multi-party call. On the bottom left of the Home screen, tap the Dial-up icon. The Dial-up page is displayed. Enter a phone number and choose between card 1 and card 2 to make the call. When you enter the number, the phone will automatically search among all contacts a number that best matches the entered numerals, to facilitate your operation. During a call, tap Add a Call, and this call automatically switches to Silent mode. Enter the number of another contact, tap Dial-up, and the previous call automatically switches to On-hold mode. After the second call is answered, tap Join. In this way, a teleconference is established to achieve a multi-party talk. Note: You need to subscribe to this service from your carrier before you use it. You are also allowed to initiate a call by selecting a phone number from the list of contacts or the Message page. Contacts Tap Contacts to open it. The Contacts page offers management functions. It allows you to view the list of contacts and related details, make a call or send an SMS to a certain contact, and share the contact. Contact import: On the Contacts page, tap the setting button, and choose Import/Export to select a mode for importing or exporting a contact. Add a contact: On the lower right of the Contacts page, tap the Add button to add a contact to your phone or USIM/SIM. Enter the name and number, and tap Finish. In this way, a contact is created. Contact list: On the Contacts page, tap the image of a contact. Details about the contact is displayed. This allows you to quickly make a call or send an SMS to the contact. Search contact: On the Contacts page, tab Search, and enter related information about a certain contact to search it among the list of contacts. Message Tab Message on the desktop. Then you can create and send an SMS or MMS. New message: Tap the Add icon on the upper right of the Message page. The message creating page is displayed. Enter the name or phone number of the target contact into the Recipient bar. The phone will automatically search among the list of contacts for one that best matches the entered info. (You can also selec…

Text truncated - open the document above for the full version.

Shenzhen Huafurui Technology Co., Ltd Date: 05/24/2022 Model Number:POCKET To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We,Shenzhen Huafurui Technology Co., Ltddeclare that this EUT (FCC ID: 2AHZ5PT)willconduct FCC compliance testing, the sDOC part recognized test lab(ShenzhenNTEK Testing Technology Co., Ltd.). 1/F, Building E, Fenda Science Park, Sanwei Community,Xixiang Street Bao’an District, Shenzhen 518126 P.R. China Please contact me if you have any question. Sincerely, (Signed) Name / Title:Paul Liu / Manager Company: Shenzhen Huafurui Technology Co., Ltd Address:Unit 1401 14/F, Jin qi zhigu mansion, Liu xian street, Xili, Nan shan district, Shenzhen, China Phone: 0755-83821787 Email: [email protected]

C5266091_X8_Ed.1 1/1 Letter of Authorization <Shenzhen Huafurui Technology Co., Ltd> Company:Shenzhen Huafurui Technology Co., Ltd Address:Unit 1401 14/F, Jin qi zhigu mansion, Liu xian street, Xili, Nan shan district, Shenzhen, China Product Name:Smartphone Model Number:POCKET FCC Identifier:2AHZ5PT We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name:Paul Liu Date: 05/24/2022 Title: Manager Signature of applicant:

C5266091_X10_Ed.2 1/1 <Shenzhen Huafurui Technology Co., Ltd> Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046Date: 2022-05-24 Subject: Request for Confidentiality FCC ID: 2AHZ5PT To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No Block Diagram ☐ Schematics ☐ Test Report No No Test Setup Photos No User’s Manual ☐ NOTE 1 Internal Photos ☐ NOTE 1 Parts List / Tune Up / BOM List ☐ RF Exposure Info No No Operational Description ☐ Cover Letter(s) No No SOFTWARE SECURITY REQUIREMENTS FOR U- NII DEVICES No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of _180_ days from the date of the Grant of Equipment Authorization and prior to marketing. C5266091_X10_Ed.2 1/1 It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Paul Liu Title:Manager

ATTACHMENT PHOTOGRAPHS OF EUT Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Photo 8 Photo 9 Photo 24

ATTACHMENT PHOTOGRAPHS OF EUT Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Photo 8 Photo 9 Photo 10 Photo 11 Photo 12 NFC ANT Photo 13 Photo 14 GSM/WCDMA/LTE Main ANT WIFI/BT/GPS ANT LTE AUX ANT

Page 1 of 241 Report No.: S22050605503001 FCC SAR EVALUATION REPORT In accordance with the requirements of FCC 47 CFR Part 2(2.1093), ANSI/IEEE C95.1-1992 and IEEE Std 1528-2013 Product Name： Smartphone Brand Name： CUBOT Model Name： POCKET Family Model： N/A Report No.： S22050605503001 FCC ID： 2AHZ5PT Prepared for Shenzhen Huafurui Technology Co., Ltd Unit 1401 14/F, Jin qi zhi gu mansion, Liu xian street, Xili, Nan shan district, Shenzhen, China Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao'an District, Shenzhen 518126 P.R.China. Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Page 2 of 241 Report No.: S22050605503001 TEST RESULT CERTIFICATION Applicant’s name .................. : Shenzhen Huafurui Technology Co., Ltd Address .................................. : Unit 1401 14/F, Jin qi zhi gu mansion, Liu xian street, Xili, Nan shan district, Shenzhen, China Manufacturer's Name ........... : Shenzhen Huafurui Technology Co., Ltd Address .................................. : Unit 1401 14/F, Jin qi zhi gu mansion, Liu xian street, Xili, Nan shan district, Shenzhen, China Product description Product name ......................... : Smartphone Brand Name ......................... : CUBOT Model and/or type reference : POCKET Family Model .......................... : N/A Standards .............................. : FCC 47 CFR Part 2(2.1093) ANSI/IEEE C95.1-1992 IEEE Std 1528-2013 Published RF exposure KDB procedures This device described above has been tested by Shenzhen NTEK. In accordance with the measurement methods and procedures specified in IEEE Std 1528-2013 and KDB 865664 D01. Testing has shown that this device is capable of compliance with localized specific absorption rate (SAR) specified in FCC 47 CFR Part 2(2.1093) and ANSI/IEEE C95.1-1992. The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK, this document may be altered or revised by Shenzhen NTEK, personal only, and shall be noted in the revision of the document. Test Sample Number ............................ S220506055003 Date of Test Date (s) of performance of tests ............. : May 07, 2022 ~ May 25, 2022 Date of Issue .......................................... : May 27, 2022 Test Result .............................................. : Pass Prepared By (Test Engineer) : (Jacob Chen) Approved By (Lab Manager) : (Alex Li) Page 3 of 241 Report No.: S22050605503001 ※ ※ Revision History ※ ※ REV. DESCRIPTION ISSUED DATE REMARK Rev.1.0 Initial Test Report Release May 27 , 2022 Jacob Chen Page 4 of 241 Report No.: S22050605503001 TABLE OF CONTENTS 1. General Information ............................................................................................ 6 1.1. RF exposure limits .................................................................................... 6 1.2. Statement of Compliance ........................................................................ 7 1.3. EUT Description ....................................................................................... 7 1.4. Test specification(s) .................................................................................. 9 1.5. Ambient Condition ................................................................................... 9 2. SAR Measurement System ................................................................................. 10 2.1. SATIMO SAR Measurement Set-up Diagram .......................................... 10 2.2. Robot ..................................................................................................... 11 2.3. E-Field Probe .......................................................................................... 12 2.3.1. E-Field Probe Calibration ................................................................. 12 2.4. SAM phantoms ...................................................................................... 13 2.4.1. Technical Data .................................................................................. 14 2.5. Device Holder ........................................................................................ 15 2.6. Test Equipment List ................................................................................ 16 3. SAR Measurement Procedures .......................................................................... 18 3.1. Power Reference ................................................................................... 18 3.2. Area scan & Zoom scan .......................................................................... 18 3.3. Description of interpolation/extrapolation scheme .............................. 20 3.4. Volumetric Scan ..................................................................................... 20 3.5. Power Drift ............................................................................................ 20 4. System Verification Procedure .......................................................................... 21 4.1. Tissue Verification ................................................................................. 21 4.1.1. Tissue Dielectric Parameter Check Results ...................................... 22 4.2. System Verification Procedure .............................................................. 23 4.2.1. System Verification Results .............................................................. 24 5. SAR Measurement variability and uncertainty .................................................. 25 5.1. SAR measurement variability ................................................................. 25 5.2. SAR measurement uncertainty ...........................................…

Text truncated - open the document above for the full version.

Page 151 of 241 Report No.: S22050605503001 Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR (W/Kg) 0.7283 0.4909 0.2932 0.1747 0.1061 0.0640 0.0423 3D screen shot Hot spot position Page 152 of 241 Report No.: S22050605503001 14. Appendix D. Calibration Certificate Table of contents E Field Probe - SN 08/16 EPGO287 750 MHz Dipole - SN 03/15 DIP 0G750-355 835 MHz Dipole - SN 03/15 DIP 0G835-347 1800 MHz Dipole - SN 03/15 DIP 1G800-349 1900 MHz Dipole - SN 03/15 DIP 1G900-350 2450 MHz Dipole - SN 03/15 DIP 2G450-352 2600 MHz Dipole - SN 03/15 DIP 2G600-356 5000-6000 MHz Dipole - SN 13/14 WGA 33 Extended Calibration Certificate Page 153 of 241 Report No.: S22050605503001 Page 154 of 241 Report No.: S22050605503001 Page 155 of 241 Report No.: S22050605503001 Page 156 of 241 Report No.: S22050605503001 Page 157 of 241 Report No.: S22050605503001 Page 158 of 241 Report No.: S22050605503001 Page 159 of 241 Report No.: S22050605503001 Page 160 of 241 Report No.: S22050605503001 Page 161 of 241 Report No.: S22050605503001 Page 162 of 241 Report No.: S22050605503001 Page 163 of 241 Report No.: S22050605503001 Page 164 of 241 Report No.: S22050605503001 Page 165 of 241 Report No.: S22050605503001 Page 166 of 241 Report No.: S22050605503001 Page 167 of 241 Report No.: S22050605503001 Page 168 of 241 Report No.: S22050605503001 Page 169 of 241 Report No.: S22050605503001 Page 170 of 241 Report No.: S22050605503001 Page 171 of 241 Report No.: S22050605503001 Page 172 of 241 Report No.: S22050605503001 Page 173 of 241 Report No.: S22050605503001 Page 174 of 241 Report No.: S22050605503001 Page 175 of 241 Report No.: S22050605503001 Page 176 of 241 Report No.: S22050605503001 Page 177 of 241 Report No.: S22050605503001 Page 178 of 241 Report No.: S22050605503001 Page 179 of 241 Report No.: S22050605503001 Page 180 of 241 Report No.: S22050605503001 Page 181 of 241 Report No.: S22050605503001 Page 182 of 241 Report No.: S22050605503001 Page 183 of 241 Report No.: S22050605503001 Page 184 of 241 Report No.: S22050605503001 Page 185 of 241 Report No.: S22050605503001 Page 186 of 241 Report No.: S22050605503001 Page 187 of 241 Report No.: S22050605503001 Page 188 of 241 Report No.: S22050605503001 Page 189 of 241 Report No.: S22050605503001 Page 190 of 241 Report No.: S22050605503001 Page 191 of 241 Report No.: S22050605503001 Page 192 of 241 Report No.: S22050605503001 Page 193 of 241 Report No.: S22050605503001 Page 194 of 241 Report No.: S22050605503001 Page 195 of 241 Report No.: S22050605503001 Page 196 of 241 Report No.: S22050605503001 Page 197 of 241 Report No.: S22050605503001 Page 198 of 241 Report No.: S22050605503001 Page 199 of 241 Report No.: S22050605503001 Page 200 of 241 Report No.: S22050605503001

Page 201 of 241 Report No.: S22050605503001 Page 202 of 241 Report No.: S22050605503001 Page 203 of 241 Report No.: S22050605503001 Page 204 of 241 Report No.: S22050605503001 Page 205 of 241 Report No.: S22050605503001 Page 206 of 241 Report No.: S22050605503001 Page 207 of 241 Report No.: S22050605503001 Page 208 of 241 Report No.: S22050605503001 Page 209 of 241 Report No.: S22050605503001 Page 210 of 241 Report No.: S22050605503001 Page 211 of 241 Report No.: S22050605503001 Page 212 of 241 Report No.: S22050605503001 Page 213 of 241 Report No.: S22050605503001 Page 214 of 241 Report No.: S22050605503001 Page 215 of 241 Report No.: S22050605503001 Page 216 of 241 Report No.: S22050605503001 Page 217 of 241 Report No.: S22050605503001 Page 218 of 241 Report No.: S22050605503001 Page 219 of 241 Report No.: S22050605503001 Page 220 of 241 Report No.: S22050605503001 Page 221 of 241 Report No.: S22050605503001 Page 222 of 241 Report No.: S22050605503001 Page 223 of 241 Report No.: S22050605503001 Page 224 of 241 Report No.: S22050605503001 Page 225 of 241 Report No.: S22050605503001 Page 226 of 241 Report No.: S22050605503001 Page 227 of 241 Report No.: S22050605503001 Page 228 of 241 Report No.: S22050605503001 Page 229 of 241 Report No.: S22050605503001 Page 230 of 241 Report No.: S22050605503001 Page 231 of 241 Report No.: S22050605503001 Page 232 of 241 Report No.: S22050605503001 Page 233 of 241 Report No.: S22050605503001 Page 234 of 241 Report No.: S22050605503001 <Justification of the extended calibration> If dipoles are verified in return loss (<-20dB, within 20% of prior calibration for below 3GHz, and <-8dB, within 20% of prior calibration for 5GHz to 6GHz), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Head 750MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -23.80 - 56.4 - Mar. 01, 2021 -23.642 0.66 56.998 0.598 Feb. 28, 2022 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 235 of 241 Report No.: S22050605503001 <Head 835MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -25.44 - 54.40 - Mar. 01, 2021 -25.803 1.43 54.492 0.092 Feb. 28, 2022 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 236 of 241 Report No.: S22050605503001 <Head 1800MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -28.85 - 47.90 - Mar. 01, 2021 -28.545 1.06 47.809 0.091 Feb. 28, 2022 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 237 of 241 Report No.: S22050605503001 <Head 1900MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -24.79 - 50.80 - Mar. 01, 2021 -24.518 1.10 50.516 0.284 Feb. 28, 2022 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 238 of 241 Report No.: S22050605503001 <Head 2450MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -23.18 - 56.30 - Mar. 01, 2021 -23.39 0.91 56.342 0.042 Feb. 28, 2022 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 239 of 241 Report No.: S22050605503001 <Head 2600MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -21.15 - 52.70 - Mar. 01, 2021 -21.248 0.46 53.053 0.353 Feb. 28, 2022 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 240 of 241 Report No.: S22050605503001 <Head 5200MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -9.15 - 21.17 - Mar. 01, 2021 -9.1819 0.35 21.191 0.021 Feb. 28, 2022 The return loss is <-8dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 241 of 241 Report No.: S22050605503001 <Head 5800MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -14.30 - 54.74 - Mar. 01, 2021 -14.349 0.34 55.115 0.375 Feb. 28, 2022 The return loss is <-8dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data _______________________________________END _____________________________________

Report No.: S22050605502005 Version.1.2 Page 1 of 40 FCC RADIO TEST REPORT FCC ID: 2AHZ5PT Product: Smartphone Trade Mark: CUBOT Model No.: POCKET Family Model: N/A Report No.: S22050605502005 Issue Date: May 18, 2022 Prepared for Shenzhen Huafurui Technology Co., Ltd Unit 1401 14/F, Jin qi zhi gu mansion, Liu xian street, Xili, Nan shan district, Shenzhen, China Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen P.R. China Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website:http://www.ntek.org.cn Report No.: S22050605502005 Version.1.2 Page 2 of 40 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 3 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 4 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 5 3.1 FACILITIES..................................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 5 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ........................................................................................................... 9 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ....................................................................... 9 6.2 SUPPORT EQUIPMENT ............................................................................................................................... 10 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 11 7 TEST REQUIREMENTS .................................................................................................................................... 12 7.1 FIELD STRENGTH OF SPURIOUS RADIATION ...................................................................................... 12 7.2 EFFECTIVE RADIATED POWER AND EFFECTIVE ISOTROPIC RADIATED POWER ........................ 21 7.3 CONDUCTED OUTPUT POWER ................................................................................................................ 27 7.4 FREQUENCY STABILITY ........................................................................................................................... 29 7.5 PEAK-TO-AVERAGE RATIO ...................................................................................................................... 34 7.6 26DB BANDWIDTH AND 99% OCCUPIED BANDWIDTH ..................................................................... 36 7.7 CONDUCTED BAND EDGE ....................................................................................................................... 38 7.8 CONDUCTED SPURIOUS EMISSION AT ANTENNA TERMINAL ......................................................... 39 Report No.: S22050605502005 Version.1.2 Page 3 of 40 1 TEST RESULT CERTIFICATION Applicant’s name ......................... : Shenzhen Huafurui Technology Co., Ltd Address ....................................... : Unit 1401 14/F, Jin qi zhi gu mansion, Liu xian street, Xili, Nan shan district, Shenzhen, China Manufacturer's Name .................. : Shenzhen Huafurui Technology Co., Ltd Address ....................................... : Unit 1401 14/F, Jin qi zhi gu mansion, Liu xian street, Xili, Nan shan district, Shenzhen, China Product description Product name .............................. : Smartphone Model and/or type reference ...... : POCKET Family Model ............................... : N/A Measurement Procedure Used: APPLICABLE STANDARDS APPLICABLE STANDARD/ TEST PROCEDURE TEST RESULT 47 CFR Part 2, Part 22H, Part 24E, Part 27 ANSI/TIA-603-E-2016 FCC KDB 971168 D01 Power Meas License Digital Systems v03 ANSI C63.26:2015 Complied This device described above has been tested by Shenzhen NTEK Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK Testing Technology Co., Ltd., this document may be altered or revised by Shenzhen NTEK Testing Technology Co., Ltd., personnel only, and shall be noted in the revision of the document. The test results of this report relate only to the tested sample identified in this report. Date of Test : May 09. 2022 ~ May 17, 2022 Testing Engineer : (Allen Liu) Authorized Signatory : (Alex Li) Report No.: S22050605502005 Version.1.2 Page 4 of 40 2 SUMMARY OF TEST RESULTS FCC Part22H / FCC Part24E / FCC Part 27 & ANSI C63.26-2015 FCC Rule Test Item Verdict Remark 2.1046 Conducted Output Power PASS 24.232 27.50 KDB 971168 D01 Clause 5.7 Peak-to-Average Ratio PASS 2.1049 22.917 24.238 KDB 971168 D01 Clause 4.2 Occupied Bandwidth PASS 2.1051 22.917 24.238 27.53 KDB 971168 D01 Clause 6 Band Edge PASS 22.913 KDB 971168 D01 Clause 5.6 Effective Radiated Power PASS 24.232 27.50 KDB 971168 D01 Clause 5.6 Equivalent Isotropic Radiated Power PASS 2.1053 22.917 24.238 27.53 KD…

Text truncated - open the document above for the full version.