2AHZC-G5SMARTBS3739WG5-SMART-BS-37-39

Dated: February 20, 2026 Nemko North America, Inc. 303 River Road Ottawa ON K1V 1H2 Canada U.S. Agent Designation for Service of Process Attestation Letter FCC ID: 2AHZC-G5SMARTBS3739 Applicant FRN: 0025484908 This letter serves as a formal designation, pursuant to §2.911(d)(7) of the FCC Rules, of the following U.S. Agent for Service of Process for the equipment under application: U.S. Agent for Service of Process: • Company Name: INTRACOM TELECOM USA INC. • Physical U.S. Company Address: 3675 Crestwood Parkway, Suite 400, Duluth, Georgia, USA 30096 • Agent Name*: Mr. KYRIAKOS VERGOS • Agent Email Address: [email protected] • Agent FRN**: 0034836957 The above listed designated agent hereby acknowledges and accepts the obligation for service of process on behalf of the applicant signed below. The applicant further acknowledges and accepts its obligation to maintain a U.S. Agent for Service of Process for a minimum period of one year following either: • Permanent termination of all marketing and importation activities within the U.S. for the applicable equipment by the grantee. • The conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever occurs later. Applicant Signed: Designated Agent Signed: (Required, if different to Applicant) Signed: Signed: Printed name: Ioannis Tenidis Printed name: Kyriakos Vergos Title: Director WNS Product Management & Marketing /Pre Sales Title: CEO Company Name: INTRACOM SINGLE MEMBER S.A. TELECOM SOLUTIONS Company Name: INTRACOM TELECOM USA Inc Phone: +30 210 6677276 Phone: +1 6125164757 Email: [email protected] Email: kvergos@intracom- telecom.com

Dated: February 19, 2026 Nemko North America, Inc. 303 River Road Ottawa, ON K1V 1H2 Canada Covered Equipment Certification Attestation Letter Applicant: INTRACOM SINGLE MEMBER S.A. TELECOM SOLUTIONS FCC ID: 2AHZC-G5SMARTBS3739 The applicant certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section §2.903 of the FCC rules. This includes certifying that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current FCC Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. The applicant certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature: Name: Ioannis Tenidis Title: Director WNS Product Management & Marketing /Pre Sales Company: INTRACOM SINGLE MEMBER S.A. TELECOM SOLUTIONS Address: 19.7 Km of the New Road Peania – Markopoulo, Peania, Attiki, Greece Phone: +30 210 6677276 Email: [email protected]

Dated: February 20, 2026 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Confidentiality Request Letter – FCC FCC ID: 2AHZC- G5SMARTBS3739 Pursuant to FCC 47 CFR 0.457(d)(1)(ii) and 0.459 and FCC guidance published in KDB 726920, we hereby request confidential treatment of information accompanying this application as outlined below. Long Term Confidentiality (LTC) request We request the exhibits selected below as long term confidential be withheld from public view permanently: Selection Exhibit name ☒ Block Diagrams ☒ Operation Description / Theory of Operation ☒ Parts List & Placement / BOM ☒ Schematics ☐ Tune-Up Procedure (for Licensed equipment only) Short Term Confidentiality (STC) request We also request the exhibits selected below as short term confidential be withheld from public view for a period of 180 days 1 from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public: Selection 2 Exhibit name ☐ User’s Manual ☐ Internal Photos ☒ External Photos ☒ Test Setup Photos ☒ Tune-Up Procedure (for Licensed equipment only) Justification for Confidentiality The development of this product represents a significant investment and a strategic competitive differentiator for our company. Unrestricted public access to its design specifics would negate this hard-earned advantage, leading to considerable financial hardship. In the event of market introduction before the designated short-term confidentiality period expires, the grantee will notify the TCB to ensure timely release of the confidential information on the FCC equipment authorization website. The content herein contains trade secrets and proprietary information not typically released to the public. Disclosure of this information could severely impact the applicant and provide an unfair advantage to competitors. The Applicant acknowledges that, under Rule 0.457(d)(1)(ii), this Application and all associated materials will not be disclosed before the Grant date. Sincerely, Signature: Name: Ioannis Tenidis Title: Director WNS Product Management & Marketing /Pre Sales Company: INTRACOM SINGLE MEMBER S.A. TELECOM SOLUTIONS Address: 19.7 Km of the New Road Peania – Markopoulo, Peania, Attiki, Greece Phone: +30 210 6677276 Email: [email protected] 1 - Number of days can be listed up to 180 but should not go past the date of beginning of product marketing/sale. 2 - Any exhibits that may have already been requested to have “Permanent” confidentiality need not be repeated under Short-Term confidentiality request.

Dated: February 20, 2026 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Request for Special Confidentiality – FCC FCC ID: 2AHZC- G5SMARTBS3739 Pursuant to FCC 47 CFR 0.457(d)(1)(ii) and 0.459 and FCC guidance published in KDB 726920, we hereby request confidential treatment of information accompanying this application as outlined below. We request the exhibits selected below as long term confidential (LTC) be withheld from public view permanently: Selection 1 Exhibit name ☒ User’s Manual ☒ Internal Photos Our user manual contains proprietary technical content intended exclusively for professional technicians operating under a Non-Disclosure Agreement (NDA). Distribution or sale of the manual must be contingent upon the recipient’s agreement to an NDA that strictly prohibits the disclosure of its contents. Furthermore, the device’s internal circuitry and components are not accessible to end users and are designed to be serviced solely by authorized technicians under NDA. All product sales must be governed by an NDA that protects proprietary information, including internal photographs. A sample NDA is included with this application. Our company has made substantial investments in the development of this innovative product, which represents a first-of-its -kind solution in the industry. Public disclosure of the technical details would compromise our competitive edge and could result in significant financial harm. Safeguarding the confidentiality of our design is critical to protecting our intellectual property. The information provided includes trade secrets and proprietary data not customarily disclosed to the public. Unauthorized disclosure could adversely impact our business and provide competitors with an unfair advantage. Sincerely, Signature: Name: Ioannis Tenidis Title: Director WNS Product Management & Marketing /Pre Sales Company: INTRACOM SINGLE MEMBER S.A. TELECOM SOLUTIONS Address: 19.7 Km of the New Road Peania – Markopoulo, Peania, Attiki, Greece Phone: +30 210 6677276 Email: [email protected] 1 These items require further information to be provided to TCB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and review section II, 3) regarding specific information (NDA) that must accompany these requests.

NON DISCLOSURE AGREEMENT Page 1/4 No n-D i s c l o s u r e A g r e e me n t G03/26/ between Intracom Single Member S.A. Telecom Solutions, trading Name: “INTRACOM TELECOM”, a company established and operating under the laws of Greece, with VAT 094157119 and with General Commercial Registry No. 006617101000, having its Registered Offices in Peania, Attiki, Greece, at the 19.7 Km of the New Road Peania – Markopoulo (hereinafter “Intracom Telecom”) and Nemko North America, Inc., a company established and operating under the laws of Canada, having its head office at 303 River Road, Ottawa, Ontario, Canada K1V 1H2, VAT....................................... hereinafter referred to as “NEMKO”. When appropriate each party herein will hereinafter, individually, be referred to as a "Party" and/or a "Receiving Party" or a "Disclosing Party", and collectively referred to as the "Parties". This Non-Disclosure Agreement (“Agreement”) shall govern the disclosure of information from Intracom Telecom to NEMKO in connection with its products (the “Purpose”). In consideration of the foregoing the Parties mutually agree as follows: Definition: “Affiliates” means a corporation, company or other legal entity which: (i) is controlled by a Party to this Agreement; (ii) controls a Party to this Agreement; or (iii) is under common control with a Party to this Agreement. For the purpose of this definition, “control” means that more than fifty percent (50%) of the shares or ownership interest representing the voting right for the election of directors or persons performing similar functions for such a corporation, company or entity are owned or controlled, directly or indirectly, by the controlling entity. Such corporation, company or legal entity shall be deemed to be an Affiliate so long as such ownership or control exists. 1. Confidential Information 1.1. The term Confidential Information shall mean any proprietary and/ or confidential information including without limitation specifications, drawings, designs, computer software, know-how, programs, algorithms, data, process techniques, formulae; prototypes, product, samples, analyses, trade secrets, inventions, devices, discoveries, improvements, information relating to any research project, future development, information that is developed jointly between the Parties, marketing and sales leads and work in progress; any engineering, technical, manufacturing, service, commercial, financial and personnel information relating to present and future business whether in oral, written, graphic, electronic or other machine readable form; which is disclosed by the Disclosing Party. 1.2. Such Confidential Information if disclosed in a tangible or electronic form should be clearly and conspicuously marked as confidential at the time of disclosure. 1.3. If communicated orally it should be identified at the time of disclosure as being proprietary and confidential to the Disclosing Party and subsequently presented in a tangible or electronic form to the Receiving Party within a period of no more than thirty (30) days of such communication, it being understood that such information shall be protected hereunder for the said thirty (30) day period. 1.4. All Confidential Information is provided “AS IS” and without any warranty expressed or implied, including any warranty of accuracy or completeness. NON DISCLOSURE AGREEMENT Page 2/4 2. Protection of Confidential Information 2.1. The Receiving Party in each case undertakes from the date of disclosure in respect of Confidential Information disclosed to it hereunder: (a) to keep such Confidential Information confidential using at least the same degree of care that it would normally use in protecting its own proprietary and confidential information of a similar nature; (b) not to copy or to cause to be made copies of such Confidential Information, in whole or in part, other than for the Purpose of this Agreement, for any re-disclosure thereof whether directly or indirectly to any third party; (c) not to disclose such Confidential Information to any personnel within the Receiving Party's organization who do not have a need to receive such Confidential Information for the Purpose of this Agreement; (d) not to use or allow to be used such Confidential Information, in whole or in part, except solely in relation to the Purpose, unless (and then only to the extent which) a further use of the Confidential Information is specifically authorized in writing by the Disclosing Party. (e) Upon the Disclosing Party’s written request either destroy or return at its own cost to the Disclosing Party any Confidential Information (together with all copies thereof). 2.2. Additionally, Receiving Party shall not be free to use the residuals resulting from access to or work with Disclosing Party’s Confidential Information for any purpose except as permitted pursuant to the terms of this Agreement. The term “residuals” means information retained in the unaided memory of persons employed or retained by Receiving Party who have had access to or worked with the Confidential Information, including ideas, concepts, know‐how or techniques contained therein. “Unaided memory” means that the Receiving Party has not intentionally memorized information for the purpose of retaining and subsequently using or disclosing it. Receiving Party shall also have the obligation to limit or restrict the assignment of such persons. 2.3. Any release of Confidential Information, when considered necessary, to any person outside the Parties shall be coordinated and approved in writing by both Parties prior to dissemination and release. Such release shall be made subject to said person's agreement in writing on the same terms as set out in this Agreement not to make further disclosure and to use Confidential Information solely for the Purpose of this Agreement. 2.4. If a Party becomes aware of any disclosure concerning Confidential Information not permitted by this Agreement, it shall…

Text truncated - open the document above for the full version.

Dated: February 19, 2026 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Appointment of Agent for FCC Certification Application Dear Director of Certification, This letter formally appoints Spencer Zhong of Nemko Canada, Inc. located at 303 River Road, Ottawa, Ontario, Canada K1V 1H2, as our authorized agent to represent us in the application process for equipment certification. We confirm that the submitted documents accurately depict the device or system seeking certification. Additionally, we guarantee that all units produced, imported, or marketed, as defined by FCC regulations, will possess a label identical to the one submitted with this application. By signing below, we certify that neither our company nor any party involved in the application is subject to denial of federal benefits, including FCC benefits, as outlined in Section 5301 of the Anti- Drug Abuse Act of 1988 (21 U.S.C. §862) due to a conviction for possession or distribution of a controlled substance. Furthermore, no party involved in the application, as defined in 47 CFR 1.2002 (b), is subject to denial of federal benefits, including FCC benefits. We attest to the truth and accuracy of the information provided to the FCC to the best of our knowledge (47 CFR 2.911 (d)) and acknowledge our responsibilities as a grantee regarding certified equipment (47 CFR 2.909). In instances where our authorized agent signs the application for certification on our behalf, we understand that Nemko North America, Inc. remains solely responsible for adhering to the terms and conditions for certification as specified by Nemko Canada Inc. Agency agreement expiration date: December 31, 2026 *Up to 12 months Sincerely, Signature: Name: Ioannis Tenidis Title: Director WNS Product Management & Marketing /Pre Sales Company: INTRACOM SINGLE MEMBER S.A. TELECOM SOLUTIONS Address: 19.7 Km of the New Road Peania – Markopoulo, Peania, Attiki, Greece Phone: +30 210 6677276 Email: [email protected]

Label and Label Location Exhibit Product Name: WiBAS G5 Smart Model Number: WG5-SMART-BS-37-39 FCC ID: 2AHZC-G5SMARTBS3739 Applicant: INTRACOM SINGLE MEMBER S.A. TELECOM SOLUTIONS Date: February 26, 2026 Main Product Label Power Supply Input Label FCC Label Frequency Label (Example, TX frequency range dependant) Label position Label Specifications See following attached pages Technical Data Sheet BRADY B-486B THERMAL TRANSFER PRINTABLE METALLIZED POLYESTER LABEL STOCK TDS No. B-486B Effective Date: 06/21/2021 Description: GENERAL Print Technology:Thermal Transfer Material Type:Metallized Polyester Finish:Matte, light gray Adhesive:Permanent rubber-based APPLICATIONS Rating and serial plates that utilize barcodes, alphanumerics, graphic symbols and logos and require nameplate-like quality. RECOMMENDED RIBBONS Brady Series R4300 REGULATORY/AGENCY APPROVALS UL:B-486B is a UL Recognized Component to UL969 Labelingand Marking Standard when printed with the Brady Series R4300 Ribbon. See UL file MH17154 for specific details. UL information can be accessed online at UL.com in the UL Product iQ area. CSA:B-486B is CSA Accepted to C22.2 No. 0.15-15 AdhesiveLabels Standard when printed with the Brady Series R4300. See CSA file 041833 for specific details.CSA Informationaccessed on line at https://www.csagroup.org/testing-certification/product-listing/ For information on the Weee-RoHS compliance status for a Brady Product go to one of the following websites: In Canada:www.bradycanada.ca/weee-rohs In Europe:www.bradyeurope.com/rohs In Japan:www.brady.co.jp/products/labelsuse/rohs All other regions:www.bradyid.com/weee-rohs SPECIAL FEATURES B-486B is designed for high adhesion to textured metals, powder coated surfaces and low surface energy plastics. B-486B can withstand numerous solvents and variable temperatures when applied to various surfaces. Details: PHYSICAL PROPERTIESTEST METHODSAVERAGE RESULTS ThicknessASTM D 1000 -Substrate -Adhesive -Total (excluding liner) 0.0038 inch (0.097 mm) 0.0019 inch (0.048 mm) 0.0056 inch (0.142 mm) Adhesion to: -Stainless Steel -Textured ABS -Polypropylene -Painted Enamel ASTM D 1000 20 minute dwell 24 hour dwell 20 minute dwell 24 hour dwell 20 minute dwell 24 hour dwell 20 minute dwell 24 hour dwell 116 oz/in (127 N/100 mm) 129 oz/in (141 N/100 mm) 45 oz/in (49 N/100 mm) 45 oz/in (49 N/100 mm) 98 oz/in (107 N/100 mm) 110 oz/in (120 N/100 mm) 93 oz/in (104 N/100 mm) 93 oz/in (102 N/100 mm) -Powder Coated Metal20 minute dwell 24 hour dwell 80 oz/in (88 N/100 mm) 98 oz/in (107 N/100 mm) Performance properties were tested on B-486B printed with the Brady Series R4300 ribbon. Printed samples of B-486B were laminated to aluminum before exposure to the indicated environmental condition. PERFORMANCE PROPERTIESTEST METHODSTYPICAL RESULTS Long Term High Service Temperature30 days at 248° F (120° C)No visible effect Long Term Low Service Temperature30 days at -40° F (-40° C)No visible effect Humidity Resistance30 days at 100° F (37° C), 95% R.H.No visible effect UV Light Resistance ASTM G155, Cycle 1 (No Spray) 30 days in Xenon Test Chamber No visible effect WeatherabilityASTM G155, Cycle 1 30 days in Xenon Arc Weather-Ometer® No visible effect Salt Fog ResistanceASTM B 117 30 days in 5% salt fog solution chamber No visible effect Abrasion ResistanceTaber Abraser, CS-10 grinding wheels, (Fed.Std.191A, Method 5306) 500g/arm, 100 cycles Print still legible after 100 cycles PERFORMANCE PROPERTYCHEMICAL RESISTANCE Samples were printed with the Brady Series R4300 ribbon, laminated to flat aluminum panels and allowed to dwell 24 hours prior to test. Testing was conducted at room temperature. Testing consisted of 5 cycles of 10 minute immersions in the specified chemical followed by 30 minute recovery periods. After the final immersion the flat samples were rubbed 10 times with a cotton swab saturated with the test fluid. CHEMICAL REAGENTSUBJECTIVE OBSERVATION OF VISUAL CHANGE EFFECT TO LABEL STOCK EFFECT TO PRINT EFFECT TO PRINT WITH RUB Methyl Ethyl KetoneNo visible effect12 TolueneNo visible effect13 Isopropyl AlcoholNo visible effect11 Mineral SpiritsNo visible effect12 JP-8 Jet FuelNo visible effect12 ASTM #3 OilNo visible effect11 Mil 5606 OilNo visible effect11 Skydrol® 500B-4No visible effect11 Super Agitene®No visible effect11 Deionized WaterNo visible effect11 3% Alconox® DetergentNo visible effect11 10% Sodium Hydroxide Solution No visible effect11 10% Sulfuric Acid SolutionNo visible effect11 Rating Scale: 1= no visible effect 2= slight smear or print removal, detectable but minimal smear 3= moderate smear or print removal (print still legible) 4= severe smear or print removal (print illegible or just barely legible) 5= complete print and/or topcoat removal NP= print removed prior to rub Shelf Life: Shelf life is two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH. It remains the responsibility of the user to assess the risk of using this product. We encourage customers to develop testing protocols that will qualify a product's fitness for use in their actual application. Trademarks: ASTM: American Society for Testing and Materials (U.S.A.) CSA: Canadian Standards Association SAE: Society of Automotive Engineers (U.S.A.) UL: Underwriters Laboratories Inc. (U.S.A.) Alconox® is a registered trademark of Alconox Co. Skydrol® is a registered trademark of the Monsanto Company Super Agitene® is a registered trademark of Graymills Corporation Weather-Ometer® is a registered trademark of Atlas Material Testing Technology All S.I. Units (metric) are mathematically derived from the U.S. Conventional Units Note:All values shown are averages and should notbe used for specification purposes. Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on …

Text truncated - open the document above for the full version.

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by ANSI National Accreditation Board (ANAB). The test results included in this report are within the scope of this accreditation. The ANAB symbol is an official symbol of the ANSI National Accreditation Board, used under licence. FCC and ISED RSS-102– MPE Calculation; Date: January 2026 RF Exposure Compliance – MPE Calculation Report C h o o s e S c a n d i n a v i a n t r u s t Applicant company: INTRACOM SINGLE MEMBER S.A. TELECOM SOLUTIONS, INTRACOM TELECOM Model number (HVIN): WG5-SMART-BS-37-39 Model name (PMN): WiBAS G5 Smart FCC Identification: FCC ID: 2AHZC-G5SMARTBS3739 Product type: Fixed Device Device category Professional Device for Occupational/Controlled Exposure Date of issue: March 10, 2026 Compliance Specifications: FCC 47 CFR Part 1 Subpart I, §§1.1307, 1.1310 FCC 47 CFR Part 2 Subpart J, §§2.1091, 2.1093 FCC KDB 447498 D01 General RF Exposure Guidance v06 FCC KDB 865664 D01 RF Exposure Procedures and Equipment Authorization Policies MPE calculation report Product info: FCC ID: 2AHZC-G5SMARTBS3739 Model: WiBAS G5 Smart Page 2 of 3 Test locations of Nemko Canada Inc. Ottawa site Montréal site GTA Cambridge site Facility address 303 River Road Ottawa, Ontario Canada K1V 1H2 Tel: +1 613 737 9680 Fax: +1 613 737 9691 292 Labrosse Avenue Pointe-Claire, Québec Canada H9R 5L8 Tel: +1 514 694 2684 Fax: +1 514 694 3528 1-130 Saltsman Drive Cambridge, Ontario Canada N3E 0B2 Tel: +1 519 650 4811 Test site identifier - FCC CA2040 CA2041 CA0101 ANAB File Number AT-3195 AT-3193 AT-3194 Andrey Adelberg Senior EMC/Wireless Specialist Prepared by Signature Limits of responsibility The results presented in this report apply solely to the specific device model tested and are valid only for the operating conditions and installation requirements specified herein. Testing was conducted in accordance with ISO/IEC 17025:2017 requirements, and all results fall within the scope of Nemko Canada's accreditation. This MPE evaluation is based on the maximum power levels and operating conditions specified. Any modifications to the device hardware, software, or installation that could affect RF output power or antenna characteristics may invalidate this compliance demonstration. Copyright notification This report may be reproduced by the applicant in its entirety for regulatory submission and internal use. Any use of this report by third parties, including reliance on its contents or decisions made based on it, is solely at the risk of those third parties. Nemko Canada Inc. assumes no responsibility for any damages incurred by third parties as a result of actions taken based on this report. © Nemko Canada Inc. All rights reserved. MPE calculation report Product info: FCC ID: 2AHZC-G5SMARTBS3739 Model: WiBAS G5 Smart Page 3 of 4 1. Executive Summary This report presents the Maximum Permissible Exposure (MPE) analysis to demonstrate compliance with FCC RF exposure requirements. The evaluation considers both single transmitter operation and simultaneous multi-transmitter scenarios where applicable. 2. Key Findings Compliance status Complies Critical separation distances 2.6 m (GP), 1.2 (O) Special conditions or limitations N/A MPE calculation report Product info: FCC ID: 2AHZC-G5SMARTBS3739 Model: WiBAS G5 Smart Page 4 of 5 MPE calculations for stand-alone transmission Device Classification Requirements Portable Device Definition (§2.1093) Devices designed for use by a person where the radiating structure is within 20 cm of the user's body require SAR evaluation rather than MPE calculation. Mobile Device Definition Devices installed in vehicles or with permanently installed antennas may use MPE calculations if minimum separation distances can be established. Fixed/Base Station Definition Stationary transmitters with controlled access to antenna locations may use MPE calculations for both occupational and general population exposure scenarios. 3. References, definitions and limits for FCC FCC §2.1091(d) (2) For operations within the frequency range of 300 kHz and 6 GHz (inclusive), the limits for maximum permissible exposure (MPE), derived from whole-body SAR limits and listed in Table 1 in paragraph (e)(1) of this section, may be used instead of whole-body SAR limits as set forth in paragraphs (a) through (c) of this section to evaluate the environmental impact of human exposure to RF radiation as specified in §1.1307(b) of this part, except for portable devices as defined in §2.1093 of this chapter as these evaluations shall be performed according to the SAR provisions in §2.1093. Table 1: §1.1310(e)(1)—Power Density Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Power density (mW/cm 2 ) Averaging time (minutes) (i) Limits for Occupational/Controlled Exposure 0.3–3.0 *(100) ≤6 3.0–30 *(900 / f 2 ) <6 30–300 1.0 <6 300–1500 f / 300 <6 1500–100000 5 <6 (ii) Limits for General Population/Uncontrolled Exposure 0.3–1.34 *(100) <30 1.34–30 *(180 / f 2 ) <30 30–300 0.2 <30 300–1500 f / 1500 <30 1500–100000 1.0 <30 Notes: f = frequency in MHz. * = Plane-wave equivalent power density. MPE calculation report Product info: FCC ID: 2AHZC-G5SMARTBS3739 Model: WiBAS G5 Smart Page 5 of 6 4. Power density calculation formula The fundamental equation (from page 18 of OET Bulletin 65, Edition 97-01) for calculating power density at a specified distance from an RF source is derived from the far-field assumption: 푆= 푃퐺 4휋푅 2 where: • S = Power density (mW/cm² or W/m²) • P = Power input to antenna (mW or W) • G = Antenna gain (linear ratio, not dB) • R = Distance from radiation center (cm or m) This equation assumes: • Far-field conditions (R > 2D²/λ, where D is largest antenna dimension) are assumed at the evaluation distance of 20 cm • Isotropic power distribution (conservative approach) • Free-space propagation conditions • Worst-case antenna orientation Multiple Transmitter Analysis (if applicable) Total Exposure Ratio (TER) Calcul…

Text truncated - open the document above for the full version.

WiBASG5 Smart Antennas, 39GHz Product Description:RadioBase Station Product Name:WiBASG5 Smart Model Number:WG5-SMART-BS-37-39 Manufacturer:INTRACOM SINGLE MEMBER S.A. TELECOM SOLUTIONS BaseStation: Antenna Specifications Type: Embedded Beamforming (electronically steerable phased array) Number of Antennas -Polarization: Hub Station comprises 4 independent Antennas, two of these at Vertical Polarization and two at Horizontal one Frequency of operation: 37-40 GHz Gain: 27.5 dBityp(boresight) Directivity: 28.0 dBityp(boresight) 3 dB beamwidth, azimuth: 5.5 degrees min 3 dB beamwidth, elevation: 8.0 degrees min Azimuth steering range: +/-45 degrees Sidelobe suppression: 11 dB min XPD: 35 dB min Dimensions: 6.5 X 5.5 cm max per Antenna Radiating elements: 128 for each of the Vertically polarized Antenna and 160 for each of the Horizontally polarized Antenna BaseStation: Output Power System transmits the following maximum power per Antenna: Max TRP= 22.6 dBm Max EIRP= 50.1 dBm All (four) antennas deliver a total/ combined power of: Max EIRP= 50.1+6= 56.1 dBm Vertical antenna copolarRPEs Vertical antenna crosspolarRPEs Horizontal antenna copolarRPEs Horizontal antenna crosspolarRPEs

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by ANSI National Accreditation Board (ANAB). The tests included in this report are within the scope of this accreditation. The ANAB symbol is an official symbol of the ANSI National Accreditation Board, used under licence. ANAB File Number: AT-3195 (Ottawa); AT-3193 (Pointe-Claire); AT-3194 (Cambridge) FCC Part 30 and RSS-191.docx; Date: Feb 18, 2026 C h o o s e S c a n d i n a v i…

Text truncated - open the document above for the full version.