2AHZC-OSDR28L100802Point-to-Multipoint Gigabit Radio 28 GHz (TS)

Installation & Cabling Manual Edition 3.0 Confidential Outdoor Software-Defined Radio (OSDR) platform GDC- 003 / 54 OSDR INTRACOM TELECOM 19.7 km Markopoulou Ave., Peania, Athens, GR 19002 T +30 210 667 1000, F +30 210 667 1001 http://www.intracom-telecom.com email (product support): [email protected] The information contained in this document is subject to change without prior notice.  INTRACOM S.A. TELECOM SOLUTIONS, 2018. All rights reserved. All copyright, intellectual and industrial rights in this document and in the technical knowledge it contains are owned by INTRACOM S.A. TELECOM SOLUTIONS and/or their respective owners. This document is made available to the end users only for their internal use. No part of this document nor any data herein may be published, disclosed, copied, reproduced, redistributed by any form or means, electronically or mechanically, or used for any other purpose whatsoever without the prior written approval of INTRACOM S.A. TELECOM SOLUTIONS. Information as well as drawings and specifications contained in this document are subject to change without prior notice. All trademarks and copyrights mentioned herein are the property of INTRACOM S.A. TELECOM SOLUTIONS and/or their respective owners. Any rights not expressly granted herein are reserved. Printed in Greece. Outdoor Software Defined Radio (OSDR) platform Installation & Cabling Manual - Edition 3.0 -I- Document Revision History Previous Edition: 2.2 Current Edition: 3.0 Reasons of Change M = Modified, A = Added, R = Removed Details New materials (M) (A) New installation procedures (A) • Sectoral 26/28/32 GHz antenna • Sectoral 10.5 GHz antenna • Parabolic antenna 10.5/26/28/32 GHz • M20 gland • Outdoor AC PoNE • Indoor AC PoNE • XPOL tool kit Contents restructure (M) Document optimization Revised installation instructions (M) • OSDR to sectoral/parabolic antenna • OSDR to panel antenna • Panel antenna mounting kit • ETH cable installation • Optical cable installation • Power injectors installation • Sectoral antenna pole space requirements Outdoor Software Defined Radio (OSDR) platform Installation & Cabling Manual - Edition 3.0 -II- Outdoor Software Defined Radio (OSDR) platform Installation & Cabling Manual - Edition 3.0 -III- Equipment Disposal Disposal of old electrical and electronic equipment (applicable through the European Union and other European countries with separate waste collection systems). This symbol, found on this product and any of its parts or on its operating instructions or on its packaging, indicates that electrical and electronic equipment may not be disposed of as unsorted municipal waste. Instead, this product should be handed over to applicable collection points for the recycling of electrical and electronic equipment. By ensuring the correct disposal of this product, you will help prevent potential negative consequences to the environment and human health, which could otherwise be caused by inappropriate disposal of this product. By recycling, reusing and other forms of recovery of old electrical and electronic equipment you are making an important contribution to the conservation of natural resources and to the protection of the environment. For more information about the recycling of this product, please contact your local municipal authorities, municipal waste disposal service or the store where you purchased this product. Απόρριψη παλαιών ηλεκτρικών και ηλεκτρονικών συσκευών (ισχύει στην Ευρωπαϊκή Ένωση και άλλες Ευρωπαϊκές χώρες με συστήματα χωριστής συλλογής απορριμμάτων). Το σύμβολο αυτό, που απεικονίζεται πάνω στο προϊόν και σε τυχόν εξαρτήματα του ή στο εγχειρίδιο οδηγιών του ή στη συσκευασία του, δείχνει ότι οι ηλεκτρικές και ηλεκτρονικές συσκευές, μετά το πέρας της λειτουργίας τους, δεν θα πρέπει να απορρίπτονται μαζί με τα αστικά απόβλητα. Αντίθετα θα πρέπει να παραδίδονται σε κατάλληλα σημεία συλλογής για την ανακύκλωση των ηλεκτρικών και ηλεκτρονικών συσκευών. Διασφαλίζοντας τη σωστή απόρριψη αυτού του προϊόντος, συνεισφέρετε στην πρόληψη πιθανών αρνητικών συνεπειών στο περιβάλλον και την ανθρώπινη υγεία, οι οποίες θα μπορούσαν να προκληθούν από την μη ενδεδειγμένη απόρριψη του προϊόντος. Η ανακύκλωση, επαναχρησιμοποίηση και άλλες μορφές αξιοποίησης των παλαιών ηλεκτρικών και ηλεκτρονικών συσκευών βοηθούν στη διαφύλαξη των φυσικών πόρων και στην προστασία του περιβάλλοντος. Για περισσότερες πληροφορίες σχετικά την ανακύκλωση αυτού του προϊόντος, παρακαλούμε επικοινωνήστε με τις τοπικές δημοτικές αρχές, την υπηρεσία αποκομιδής αστικών αποβλήτων ή το κατάστημα από το οποίο αγοράσατε το συγκεκριμένο προϊόν. Για περισσότερες πληροφορίες, μπορείτε να επικοινωνείτε με το Συλλογικό Σύστημα Εναλλακτικής Διαχείρισης Αποβλήτων Ηλεκτρικού και Ηλεκτρονικού Εξοπλισμού “Ανακύκλωση Συσκευών Α.Ε.” (www.electrocycle.gr). Outdoor Software Defined Radio (OSDR) platform Installation & Cabling Manual - Edition 3.0 -IV- Declaration of Conformity Hereby, Intracom S.A. Telecom Solutions declares that the products OmniBAS TM & WiBAS TM are CE mark ed in compliance with the essential requirements and other relevant provisions of the Radio Equipment Directive 2014/53/EU, Eco Design Directives 2009/125/EC, 2010/30/EU and with the requirements of the RoHS directive 2011/65/EU. The full text of the EU declaration of conformity is available at the following URL: http://emc.intracom-telecom.com/en/start.htm ∆ήλωση Συμμόρφωσης Με την παρούσα, η Intracom Α.Ε. Τηλεπικοινωνιακών Λύσεων δηλώνει ότι τα προϊόντα OmniBAS TM & WiBAS TM φέρουν την σήμανση CE συμμορφούμενο προς τις απαιτήσεις και τις λοιπές διατάξεις των οδηγιών Radio Equipment Directive 2014/53/EU, Eco Design Directives 2009/125/EC, 2010/30/EU καθώς και με τις απαιτήσεις της οδηγίας RoHS 2011/65/EU. Το πλήρες κείμενο της δήλωσης συμμόρφωσης (EU) είναι διαθέσιμο στην ακόλουθη διεύθυνση URL: http://emc.intracom-telecom.com/en/start.htm Outdoor Software Defined Radio (OSDR) platform Installation & Cabling Manual - Edit…

Text truncated - open the document above for the full version.

Nemko Canada Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 FCC ID: 2AHZC-OSDR28L100802 Brand: WiBAS Product: Point-to-Multipoint Gigabit Radio 28 GHz Model: OSDR-28, OSDR-28-L-1008-02 Request for Permanent Confidentiality Pursuant to Sections 0.457(d) and 0.459 of the Commission’s rules, we hereby request that the following documents be held confidential: • Schematics • Block diagram • Bill of Materials • Operational description Request for Short-term Confidentiality • Internal photos These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated: 6/15/2020 Signed: Printed name: Ioannis Tenidis Aristeidis Zinelis Title: Marketing Manager Bidding and Contracting Manager On behalf of: Intracom S.A. Telecom Solutions

Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent FCC On our behalf, I appoint Jenny Gibbs of Nemko USA, Inc. at 2648 FM 407, Suite 200, Bartonville, TX 76226 to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in FCC regulations will have affixed to it a label identical to that submitted for approval with this application. In signing this letter, Applicant certifies that neither the applicant nor any party to the application is not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with Intracom S.A. Telecom Solutions. Dated: 6/15/2020 Agency agreement expiration date: 6/30/2021 Sincerely, Ioannis Tenidis Aristeidis Zinelis Marketing Manager Bidding and Contracting Manager

Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 where:S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Fundamental transmit (prediction) frequency:28122MHz Maximum peak output power at device output terminal:28.64dBm Cable and Jumper loss:0.0dB Maximum peak output power at antenna input terminal:28.64dBm 731.139mW Single Antenna gain (typical):43.2dBi Number of Antennae:1 Total Antenna gain (typical):43.200dBi 20892.96131(numeric) Tx On time:100.000ms Tx period time:100.000ms Average Factor:100% Prediction distance:1200cm MPE limit for uncontrolled exposure at prediction frequency:1mW/cm 2 10W/m 2 Average power density at prediction frequency:0.844166 mW/cm 2 8.44166W/m 2 Margin of Compliance:0.73572dB Maximum allowable antenna gain:43.93572dBi 2 4R PG S  

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation FCC 30 (28 GHz).docx; Date: May 2020 MRA il ac SCC Accredited LAB LAB Accrédité CCN TM Choose Scandinavian trust RADIO TEST REPORT – 398788-2TRFWL Type of assessment: Final product testing Applicant: Product: Intracom S.A. Telecom Solutions Point-to-Multipoint Gigabit Radio 28 GHz Model: Model variant: OSDR-28-L-1008-02 OSDR-28 FCC ID: Brand: 2AHZC-OSDR28L100802 WiBAS Specifications:  FCC 47 CFR Part 30, Subpart C Date of issue: July 27, 2020 Andrey Adelberg, Senior EMC/RF Specialist Tested by Signature David Duchesne, EMC/RF Lab Manager Reviewed by Signature Report reference ID: 398788-2TRFWL Page 2 of 32 Company name Nemko Canada Inc. Facilities Ottawa site: 303 River Road Ottawa, Ontario Canada K1V 1H2 Tel: +1 613 737 9680 Fax: +1 613 737 9691 Montréal site: 292 Labrosse Avenue Pointe-Claire, Québec Canada H9R 5L8 Tel: +1 514 694 2684 Fax: +1 514 694 3528 Cambridge site: 1-130 Saltsman Drive Cambridge, Ontario Canada N3E 0B2 Tel: +1 519 650 4811 Almonte site: 1500 Peter Robinson Road West Carleton, Ontario Canada K0A 1L0 Tel: +1 613 256-9117 Fax: +1 613 256-8848 Test site identifier Organization Ottawa/Almonte Montreal Cambridge FCC: CA2040 CA2041 CA0101 ISED: 2040ª-4 2040G-5 24676 Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contained in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: 398788-2TRFWL Page 3 of 32 Table of contents Table of contents .......................................................................................................................................................................................................... 3 Section 1. Report summary ................................................................................................................................................................................. 4 1.1 Test specifications .................................................................................................................................................................................................... 4 1.2 Test methods ............................................................................................................................................................................................................ 4 1.3 Exclusions ................................................................................................................................................................................................................. 4 1.4 Statement of compliance ......................................................................................................................................................................................... 4 1.5 Test report revision history ...................................................................................................................................................................................... 4 Section 2. Engineering considerations .................................................................................................................................................................. 5 2.1 Modifications incorporated in the EUT for compliance ............................................................................................................................................ 5 2.2 Technical judgment .................................................................................................................................................................................................. 5 2.3 Deviations from laboratory tests procedures ........................................................................................................................................................... 5 Section 3. Test conditions .................................................................................................................................................................................... 6 3.1 Atmospheric conditions ........................................................................................................................................................................................... 6 3.2 Power supply range .................................................................................................................................................................................................. 6 Section 4. Measurement uncertainty ................................................................................................................................................................... 7 4.1 Uncertainty of measurement ................................................................................................................................................................................... 7 Section 5. Information provided by the applicant .............................................................................................................................................…

Text truncated - open the document above for the full version.